Quantitative analysis of biotechnical reinforcement for a steep slope consisting of composite coal-gangue-soil medium adjacent to a mined-out area

The engineering and geological characteristics of a steep slope consisting of coal gangue, rock and soil medium in Huating coal mine have been comprehensively investigated. Owing to humid weather, heavy rainfall, vegetation and porous characteristics of the soil and rock mass, the steep slope will be destabilized and induce mud-rock flow or derive hazard easily. Firstly, based on the classical slope reinforcement theory, some regularity between the shear and displacement in the destabilized zone of the slope with or without root strength contribution is presented. Then, based on the experimental and statistical analysis of root strength, hydrological characteristics and stability status, etc., some possible biotechnical techniques for reinforcement of the steep slope have been suggested. These methods are important for quantitative analysis of destabilization of the slope and design of the biotechnical reinforcement.

Effective Medium Approximation for Nonlinear Composite Media

We build the perturbation expansion method for nonlinear composite media and extend the EMA for nonlinear effective conductivity. Using the solutions of boundary-value problems of a cylindrical in- clusion, we derive formulae for nonlinear effective conductivity.

Synthesis of ZSM-22/SAPO-11 composite molecular sieve-based catalysts with small crystallites and superior n-alkane hydroisomerization performance

To improve oil quality,ZSM-22/SAPO-11 composite molecular sieves were synthesized by adding ZSM-22 into a synthetic gel of SAPO-11 for n-decane hydroisomerization.The mass ratios of ZSM-22/(ZSM-22+SAPO-11)in the composite molecular sieves were optimized and the optimal ZSM-22/SAPO-11 composite(ZS-9)was obtained.The electrostatic repulsions between the ZSM-22 precursors and the SAPO-11 crystalline nuclei produced small ZSM-22 and SAPO-11 crystallites in ZS-9,which increased the specific surface area and mesopore volume and thereby exposed more acid sites.In comparison with conventional SAPO-11,ZSM-22 and their mechanical mixture,ZS-9 with smaller crystallites and the optimal medium and strong Brønsted acid centers(MSBAC)content displayed a higher yield of branched C_(10) isomers(81.6%),lower cracking selectivity(11.9%)and excellent stability.The correlation between the i-C_(10) selectivity and the MSBAC density of molecular sieves indicated that the selectivity for branched C_(10) isomers first increased and then decreased with increasing MSBAC density on the molecular sieves,and the maximum selectivity(87.7%)occurred with a density of 9.6×10^(−2)μmol m^(−2).

Theoretical solution of transient heat conduction problem in one-dimensional double-layer composite medium

To make heat conduction equation embody the essence of physical phenomenon under study,dimensionless factors were introduced and the transient heat conduction equation and its boundary conditions were transformed to dimensionless forms.Then,a theoretical solution model of transient heat conduction problem in one-dimensional double-layer composite medium was built utilizing the natural eigenfunction expansion method.In order to verify the validity of the model,the results of the above theoretical solution were compared with those of finite element method.The results by the two methods are in a good agreement.The maximum errors by the two methods appear when τ(τ is nondimensional time) equals 0.1 near the boundaries of ξ =1(ξ is nondimensional space coordinate) and ξ =4.As τ increases,the error decreases gradually,and when τ =5 the results of both solutions have almost no change with the variation of coordinate ξ.

Influence of Different Medium Aging on Advanced Composite T300/5405

The aging properties of advanced composite T300/5405 which soaked in 15# hydraulic oil, 4010 lubricating oil, RP-3 kerosene and AHC-1 cleaner were studied. The absorption and mechanical properties of the composites were measured, and the scanning electron microscopy （SEIVO, dynamic mechanical analysis （DMA） and the infrared analysis （IR） were used to investigate the properties＇ changes of the composite. The aging mechanism of composite T300/5405 was also discussed. The experimental results show that the absorption of the composite in AHC-1 was the biggest, and the other three mediums had little effect on the composites. The mechanical properties declined in the aging. The composites have undergone chemical change in the test; Tg rose or declined atter the aging, and the AHC-1 cleaner and 4010 lubricating oil had the greatest influence on the Tg.

Microstructure and Corrosion Resistance of a Novel AlNiLa Lightweight Medium Entropy Amorphous Alloy Composites

A new type of lightweight AlNiLa medium entropy amorphous alloy composite ribbons(labled as MEAAC ribbons)were prepared by vacuum arc melting technology and high-speed single roller meltspinning method.The microstructure and thermal stability of MEAAC ribbons were examined using X-ray diffraction,differential scanning calorimeter,and scanning electron microscope.Meanwhile,the hardness and surface roughness of these ribbons were measured by Vickers microhardness tester and atomic force microscope.The potentiodynamic polarization curves and electrochemical impedance spectroscopy(EIS)were applied to investigate the corrosion behavior of these MEAAC ribbons in simulated seawater(3.5wt%NaCl corrosive solution)at room temperature.The results demonstrate that AlNiLa MEAAC ribbons in the as-received state are mainly composed of amorphous phase and intermetallic compounds.The hardness values of all melt-spun ribbons are above 310 HV_(0.1).With the increase of Al content,the linear polarization resistances of four various AlNiLa MEAAC ribbons are negligibly different numerically.It is also found that Al_(45)Ni_(27.5)La_(27.5) MEAAC ribbons have the most positive corrosion potential and the smallest corrosion current density at the same time;hence it may be a kind of potential material for metal surface protection in harsh ocean environment.

HIGH-ORDER NOLINEAR SUSCEPTIBILITIES OF GRANULAR COMPOSITE MEDIUM

In this paper,the nonliner response of granular composite medium is studied.The composite medium considered here is composed of nonlinear cylinders with linear concentric shells randomly distributed in linear host.In the dilute limit,the effective linear dielectric constant and the high-order nonlinear susceptibilities are presented.

Multi-scale Modeling of the Effective Chloride Ion Diffusion Coefficient in Cement-based Composite Materials

N-layered spherical inclusions model was used to calculate the effective diffusion coefficient of chloride ion in cement-based materials by using multi-scale method and then to investigate the relationship between the diffusivity and the microstructure of cement-basted materials where the microstructure included the interfacial transition zone （ITZ） between the aggregates and the bulk cement pastes as well as the microstructure of the bulk cement paste itself. For the convenience of applications, the mortar and concrete were considered as a four-phase spherical model, consisting of cement continuous phase, dispersed aggregates phase, interface transition zone and their homogenized effective medium phase. A general effective medium equation was established to calculate the diffusion coefficient of the hardened cement paste by considering the microstructure. During calculation, the tortuosity （n） and constrictivity factors （Ds/Do） of pore in the hardened pastes are n^3.2, Ds/Do=l.Ox 10-4 respectively from the test data. The calculated results using the n-layered spherical inclusions model are in good agreement with the experimental results; The effective diffusion coefficient of ITZ is 12 times that of the bulk cement for mortar and 17 times for concrete due to the difference between particle size distribution and the volume fraction of aggregates in mortar and concrete.

Optimization of Culture Conditions and Medium Composition for the Marine Algicidal Bacterium Alteromonas sp. DH46 by Uniform Design

Harmful algal blooms(HABs) have led to extensive ecological and environmental issues and huge economic losses.Various HAB control techniques have been developed,and biological methods have been paid more attention.Algicidal bacteria is a general designation for bacteria which inhibit algal growth in a direct or indirect manner,and kill or damage the algal cells.A metabolite which is strongly toxic to the dinoflagellate Alexandrium tamarense was produced by strain DH46 of the alga-lysing bacterium Alteromonas sp.The culture conditions were optimized using a single-factor test method.Factors including carbon source,nitrogen source,temperature,initial pH value,rotational speed and salinity were studied.The results showed that the cultivation of the bacteria at 28℃ and 180 r min-1with initial pH 7 and 30 salt contcentration favored both the cell growth and the lysing effect of strain DH46.The optimal medium composition for strain DH46 was determined by means of uniform design experimentation,and the most important components influencing the cell density were tryptone,yeast extract,soluble starch,NaNO3 and MgSO4.When the following culture medium was used(tryptone 14.0g,yeast extract 1.63g,soluble starch 5.0 g,NaNO3 1.6 g,MgSO4 2.3 g in 1L),the largest bacterial dry weight(7.36 g L-1) was obtained,which was an enhancement of 107% compared to the initial medium;and the algal lysis rate was as high as 98.4% which increased nearly 10% after optimization.

Improvement of xylanase production by Aspergillus niger XY-1 using response surface methodology for optimizing the medium composition

Objective: To study the optimal medium composition for xylanase production by Aspergillus niger XY-1 in solid-state fermentation (SSF). Methods: Statistical methodology including the Plackett-Burman design (PBD) and the central composite design (CCD) was employed to investigate the individual crucial component of the medium that significantly affected the enzyme yield. Results: Firstly, NaNO3, yeast extract, urea, Na2CO3, MgSO4, peptone and (NH4)2SO4 were screened as the significant factors positively affecting the xylanase production by PBD. Secondly, by valuating the nitrogen sources effect, urea was proved to be the most effective and economic nitrogen source for xylanase production and used for further optimization. Finally, the CCD and response surface methodology (RSM) were applied to determine the optimal concentration of each sig-nificant variable, which included urea, Na2CO3 and MgSO4. Subsequently a second-order polynomial was determined by multiple regression analysis. The optimum values of the critical components for maximum xylanase production were obtained as follows: x1 (urea)=0.163 (41.63 g/L), x2 (Na2CO3)=?1.68 (2.64 g/L), x3 (MgSO4)=1.338 (10.68 g/L) and the predicted xylanase value was 14374.6 U/g dry substrate. Using the optimized condition, xylanase production by Aspergillus niger XY-1 after 48 h fermentation reached 14637 U/g dry substrate with wheat bran in the shake flask. Conclusion: By using PBD and CCD, we obtained the optimal composition for xylanase production by Aspergillus niger XY-1 in SSF, and the results of no additional expensive medium and shortened fermentation time for higher xylanase production show the potential for industrial utilization.

Effective Dielectric Response of Composites with Graded Material

The effective dielectric response of linear composites containing graded material is investigated under an applied electric field Eo. For the cylindrical inclusion with gradient dielectric function, εi(r) = b+cr, randomly embedded in a host with dielectric constant εm, we have obtained the exact solution of local electric potential of the composite media regions, which obeys a linear constitutive relation D= εE, using hypergeometric function. In dilute limit, we have derived the effective dielectric response of the linear composite media. Furthermore, for larger volume fraction, the formulas of effective dielectric response of the graded composite media are given.

Elastoplastic homogenization of particulate composites complying with the Mohr–Coulomb criterion and undergoing isotropic loading

This work aims at determining the overall response of a two-phase elastoplastic composite to isotropic loading. The composite under investigation consists of elastic particles embedded in an elastic perfectly plastic matrix governed by the Mohr-Coulomb yield criterion and a non-associated plastic flow rule. The composite sphere assemblage model is adopted, and closed-form estimates are derived for the effective elastoplastic properties of the composite either under tensile or compressive isotropic loading. In the case when elastic particles reduce to voids, the composite in question degenerates into a porous elastoplastic material. The results obtained in the present work are of interest, in particular, for soil mechanics.

Scale effects on nonlocal buckling analysis of bilayer composite plates under non-uniform uniaxial loads

Scale effects are studied on the buckling behavior of bilayer composite plates under non-uniform uniaxial compression via the nonlocal theory. Each isotropic plate is composed of a material that is different from others, and the adhesive between the plates is modeled as the Winkler elastic medium. According to the symmetry, effects of the Winkler non-dimensional parameter, the thickness ratio, the ratio of Young＇s moduli, and the aspect ratio are also considered on the buckling problem of bilayer plates, where only the top plate is under the uniaxial compression. Numerical examples show that the Winkler elastic coefficient, the thickness ratio, and the ratio of Young＇s moduli play decisive roles in the buckling behavior. Nonlocal effect is significant when the high-order buckling mode occurs or the aspect ratio is small.

Experimental Study on Electrorheological Performance of a Composite Material

By using SrTiO 3/PANI as a dispersed phase and silicone oil as a dispersion medium, the rheological characteristic of the dispersion medium under an electric field and the ERF performances of the mixture of SrTiO 3/PANI composite particles and silicone oil under different dispersed phase consistencies and different medium viscosities have been investigated. The measurements of the rheological characteristic, that is the shear stress of ERF, under shearing flow were performed with a Couette-type rheometer manufactured by HAAKE. It is proved that the rheological characteristic of the dispersion medium follows Newtonian fluid viscosity law and the ERF rheological characteristic of the mixture of the dispersion medium and dispersed phase obeys Bingham fluid model under electric field. The experimental result shows that the effects of different phase consistencies and different dispersion medium viscosities on ERF performances are great. The testing expressions of shear stress vs. electric field under different conditions have been obtained by polynomial fit, which is the theory foundation of application in engineering.

Obtaining of SiAlON Composite via Metal-Thermal and Nitrogen Processes in the SiC-Si-Al-Geopolymer System

Goal: obtaining of composite in the SiC-SiAlON system with the metal thermal method in the nitrogen medium. Method: SiALON-s are solid metal oxide solutions in nitrides. Area of their presence is considered in four-component system-Si3N4-ALN-AL2O3-SiO2. In the present paper SiALON-containing composite was obtained through alum-thermal process in the nitrogen medium on the base of Geopolymer (kaolin and pologycley-Ukraine), SiC, aluminum nano-powder and Si powder with small additives of perlite (Aragatz, Armenia) by the reactive baking method. The advantage of this method is that compounds, which are newly formed thanks to interaction going on at thermal treatment: Si3N4, Si, AlN are active, which contributes to SiALON formation at relatively low temperature, at 1250°C - 1300°C. Results-β-SiAlON was formed at the sintering of SiC-aluminium and silicium powder, geopolymer at 1450°C. Porosity of carbide SiAlON composite obtained by reactive sintering, according to water absorption, equals to 13% - 15%. The samples were fragmented in a jaw-crusher and were powdered in attrition mill till micro-powder dispersion was obtained. Then samples were hot-pressed at 1620°C under 30 MPa pressure. Hold-time at the final temperature was 8 min. Sample water absorption, according to porosity, was less than 0.4%. Further studies were continued on these samples. Conclusion: the paper offers processes of formation of SiC-SiAlON composites and their physical and technical properties. Phase composition of the composites was studied by X-ray diffraction method, while the structure was studied by the use of optic and electron microscope. Electric properties showed that the specimen A obtained by hot-compression is characterized by 2 signs lower resistance than the porous material B, which was used to receive this specimen. Probably this should be connected with transition of the reactively baked structure of the hot-compressed material into compact structure. Obtained materials are used in protecting jackets of thermo couples used for melted metal temperature measuring (18 - 20 measuring) and for constructions used for placing objects in factory furnaces.

Statistical optimization of medium composition and culture condition for the production of recombinant anti-lipopolysaccharide factor of Eriocheir sinensis in Escherichia coli

Anti-lipopolysaccharide factors (ALFs) are important antimicrobial peptides that are isolated from some aquatic species. In a previous study, we isolated ALF genes from Chinese mitten crab, Eriocheir sinensis. In this study, we optimized the production of a recombinant ALF by expressing E. sinensis ALF genes in Escherichia coli maintained in shake-flasks. In particular, we focused on optimization of both the medium composition and the culture condition. Various medium components were analyzed by the Plackett-Burman design, and two significant screened factors, (NH4)2SO4 and KH2PO4, were further optimized via the central composite design (CCD). Based on the CCD analysis, we investigated the induction start-up time, the isopropylthio-D-galactoside (IPTG) concentration, the post-induction time, and the temperature by response surface methodology. We found that the highest level of ALF fusion protein was achieved in the medium containing 1.89 g/L (NH4)2SO4 and 3.18 g/L KH2PO4, with a cell optical density of 0.8 at 600 nm before induction, an IPTG concentration of 0.5 mmol/L, a post-induction temperature of 32.7°C, and a post-induction time of 4 h. Applying the whole optimization strategy using all optimal factors improved the target protein content from 6.1% (without optimization) to 13.2%. We further applied the optimized medium and conditions in high cell density cultivation, and determined that the soluble target protein constituted 10.5% of the total protein. Our identification of the economic medium composition, optimal culture conditions, and details of the fermentation process should facilitate the potential application of ALF for further research.

Influence of Negative Bias Voltage on the Mechanical and Tribological Properties of MoS_2/Zr Composite Films

MoS2/Zr composite films were deposited on the cemented carbide YT14 （WC＋14%TiC＋6%Co） by medium-frequency magnetron sputtered and coupled with multi-arc ion plated techniques.The influence of negative bias voltage on the composite film properties,including adhesion strength,micro-hardness,thickness and tribological properties were investigated.The results showed that proper negative bias voltage could significantly improve the mechanical and tribological properties of composite films.The effects of negative bias voltage on film properties were also put forward.The optimal negative bias voltage was -200 V under this experiment conditions.The obtained composite films were dense,the adhesion strength was about 60 N,the thickness was about 2.4 μm,and the micro-hardness was about 9.0 GPa.The friction coefficient and wear rate was 0.12 and 2.1×10-7 cm3/N·m respectively after 60 m sliding operation against hardened steel under a load of 20 N and a sliding speed of 200 rev·min-1.

预热温度对激光选区熔化成形30%SiC_(p)/AlSi10Mg复合材料力学性能的影响

基板常温工况下激光选区熔化成形中等体积分数SiC_(p)/Al复合材料存在孔洞、裂纹等冶金缺陷,从而导致成形零件致密度低、力学性能差等问题。首先研究了固定优化成形工艺参数时,基板预热温度(200~400℃)对45μm的30%(质量分数,下同)SiC_(p)/AlSi10Mg成形零件表观致密度和力学性能的影响;进一步提高SiC_(p)质量分数至50%,再次评价了上述基板预热温度对成形性能的影响。结果表明,当SiC_(p)质量分数为30%时,升高基板预热温度可以减少成形零件的孔洞和裂纹,成形零件的表观致密度及力学性能显著提高;当基板预热至400℃时,成形零件表观致密度最高达到97.98%,与此同时极限抗压强度和极限抗拉强度分别为578 MPa和56 MPa;随着SiC_(p)质量分数进一步增加至50%,基板预热温度对成形零件致密化和力学性能的强化效果逐步减弱。本研究证明高温预热基板能够有效抑制激光选区熔化成形中等体积分数SiC_(p)/Al复合材料的冶金缺陷,为增材制造SiC_(p)/Al复合材料提供了工程应用解决方案。

金属网格-透明导电氧化物复合型透明电极的瑞利分析和仿真

以氧化铟锡(indium tin oxide,ITO)为代表的透明导电氧化物(transparent conducting oxide,TCO)在当前光电器件中的重要性日益增长.通过在TCO中引入金属网格构成复合电极,可以在保持良好透明性的前提下有效提升电学性能,同时降低对铟的需求量,并为可穿戴设备所需的柔性电极提供可能方案.对此类电极的电学性能分析,如复合电极方阻随金属网格结构参数的变化,可为电极设计与制备提供基本的出发点,但相关理论尚十分缺乏.本文针对典型的方孔方格型金属网格-TCO复合电极,分别展开基于瑞利模型和基于有限元仿真的电学性能分析.结果表明,孔型近似导致的金属通道显著畸变是复合电极的电学计算中瑞利模型在中高开口率下失效的主要原因.据此,我们采用格型修正,通过提升瑞利模型中的原胞外边界对称性来改善金属通道的畸变.与电极仿真的对比表明,修正后瑞利模型的适用范围明显扩大,其结果可与实验数据很好地拟合,为此类复合透明电极的电学数据分析与结构设计提供了简洁高效的理论工具.