High-efficiency Carbonation Modification Methods of Recycled Coarse Aggregates

To solve the problem of only surface carbonation and realize high-efficiency carbonation of recycled coarse aggregate,the method of carbonated recycled coarse aggregate with nano materials pre-soaking was first put forward.The carbonation effect of modified recycled coarse aggregate with three different carbonation methods was evaluated,and water absorption,apparent density and crush index of modified recycled coarse aggregate were measured.Combined with XRD,SEM,and MIP microscopic analysis,the high-efficiency carbonation strengthening mechanism of modified recycled coarse aggregate was revealed.The experimental results show that,compared with the non-carbonated recycled coarse aggregate,the physical and microscopic properties of carbonated recycled coarse aggregate are improved.The method of carbonation with nano-SiO_(2) pre-soaking can realize the high-efficiency carbonation of recycled coarse aggregate,for modified recycled coarse aggregate with the method,water absorption is reduced by 23.03%,porosity is reduced by 44.06%,and the average pore diameter is 21.82 nm.The high-efficiency carbonation strengthening mechanism show that the pre-socked nano-SiO_(2) is bound to the hydration product Ca(OH)_(2) of the old mortar with nano-scale C-S-H,which can improve the CO_(2) absorption rate,accelerate the carbonation reaction,generate more stable CaCO_(3) and nano-scale silica gel,and bond to the dense three-dimensional network structure to realize the bidirectional enhancement of nano-materials and pressurized carbonation.It is concluded that the method of carbonation with nano-SiO_(2) pre-soaking is a novel high-efficiency carbonation modification of recycled coarse aggregate.

Research on Heredity of Coarse Ferrite Grains

The changes in austenite grain size of the specimens with coarse ferrite grains under different heat treatment process were investigated.The focus was on studying the effect of annealing on refining coarse ferrite grains,as well as the influence of the ferrite grain size on the main technical indicators of gas carburizing.The results show that coarse ferrite grains may not necessarily cause the coarse austenite grains,but may result in mixed austenite grains.After annealing treatment,the coarse ferrite grains can be significantly refined and homogenized.Moreover,the coarse ferrite grains have no significant effects on hardnessand intergranular oxidationof gas carburizing.

Effect of High Temperature Curing on the Frost Resistance of Recycled Aggregate Concrete and the Physical Properties of Second-Generation Recycled Coarse Aggregate under Freeze-Thaw Cycles

With the emphasis on environmental issues,the recycling of waste concrete,even recycled concrete,has become a hot spot in the field of architecture.But the repeated recycling of waste concrete used in harsh environments is still a complex problem.This paper discusses the durability and recyclability of recycled aggregate concrete(RAC)as a prefabricated material in the harsh environment,the effect of high-temperature curing(60℃,80℃,and 100℃)on the frost resistance of RAC and physical properties of the second generation recycled coarse aggregate(RCA_(2))of RAC after 300 freeze-thaw cycles were studied.The frost resistance of RAC was characterized by compressive strength,relative dynamic elastic modulus,and mass loss.As the physical properties of RCA_(2),the apparent density,water absorption,and crushing value were measured.And the SEM images of RAC after 300 freeze-thaw cycles were shown.The results indicated that the frost resistance of RAC cured at 80℃ for 7 days was comparable to that cured in the standard condition(cured for 28 days at 20℃±2℃ and 95%humidity),and the RAC cured at 100℃ was slightly worse.However,the frost resistance of RAC cured at 60℃ deteriorated seriously.The RAC cured at 80℃ for 7 days is the best.Whether after the freeze-thaw cycle or not,the RCA that curd at 60℃,80℃,and 100℃ for 7 days can also meet the requirements of Grade III RCA and be used as the aggregate of non-bearing part of prefabricated concrete components.RCA_(2) which is cured at 80℃ for 7 days had the best physical properties.

Changes in soil microbial communities induced by warming and N deposition accelerate the CO 2 emissions of coarse woody debris

Warming and nitrogen(N)deposition are two important drivers of global climate changes.Coarse woody debris(CWD)contains a large proportion of the carbon(C)in the total global C pool.The composition of soil microbial communities and environmental changes(i.e.,N deposition and warming)are the key drivers of CWD decomposition,but the interactive impact between N deposition and warming on the composition of soil microbial communities and CWD decomposition is still unclear.In a laboratory experiment,we study and simulate respiration during decomposition of the CWD(C 98)of Cryptomeria japonica(CR)and Platycarya strobilacea(PL)in response to warming and N deposition over 98 days.Resuts show that either warming or N addition signifi cantly accelerated the C 98 of the two tree species by altering the soil microbial community(bacterial:fungi and G+:G–).The combined treatment(warming+N)resulted in a decomposition eff ect equal to the sum of the individual eff ects.In addition,the species composition of bacteria and fungi was obviously aff ected by warming.However,N deposition had a remarkable infl uence on G+:G–.Our results indicated that N deposition and warming will observably alter the composition and growth of the microbial community and thus work synergistically to accelerate CWD decomposition in forest ecosystems.We also present evidence that N deposition and warming infl uenced the composition and balance of soil microbial communities and biogeochemical cycling of forest ecosystems.

Effect of variations in the polar and azimuthal angles of coarse particles on the structure of drainage channels in thickened beds

The 3D reconstruction and quantitative characterization of drainage channels and coarse tailings particles in a bed were conducted in this study.The influence of variations in the azimuthal angle(θ)and polar angle(φ)of coarse particles on drainage channel structure was analyzed,and the drainage mechanism of the bed was studied.Results showed that water discharge in the bed reduced the size of pores and throat channels,increasing slurry concentration.The throat channel structure was a key component of the drainage process.Theφandθof particles changed predominantly along the length direction.The changes inφhad a cumulative plugging effect on the drainage channel and increased the difficulty of water discharge.The rake and rod formed a shear ring in the tailings bed with shear,and theθdistribution of particles changed from disorderly to orderly during the rotation process.The drainage channel was squeezed during the shearing process with the change inθ,which broke the channel structure,encouraged water discharge in the bed,and facilitated a further increase in slurry concentration.The findings of this work are expected to offer theoretical guidance for preparing high-concentration underflow in the tailings thickening process.

基于coarse-fine思想蛇算法的测量仪器几何参数标定

针对研发的正交轴系三维激光扫描设备进行几何参数标定从而提升精度问题,提出了一种基于coarse-fine思想的蛇优化标定算法,对设备装配几何误差进行测量和矫正,以提高仪器测量精度。首先对数据空间进行粗寻优,之后利用蛇算法进行精确寻优;对设备参数进行迭代优化并确定标定值;最后进行了基于标准棋盘标定板的标定实验。实验结果表明,基于coarse-fine思想的蛇优化标定算法一定程度上避免局部最优解的问题,大幅提高了标定算法的收敛速度以及适应度计算可靠性,在具体对房屋内部的实测实验中表明,于房屋的进深、标宽、净高的测量上,经过算法标定后降低的误差分别为75、23、4 mm,较大提高了设备的测量精度。该标定方法为正交轴系的测量设备的几何参数标定提供了一种新的方法。

Effects of nanobubble and hydrodynamic parameters on coarse quartz flotation

Quartz, the second most abundant mineral in the earth's crust, is a gangue mineral in practically every flotation process. Coarse quartz flotation has been a long standing problem in various mineral processing plants to reduce milling cost and increase valuable mineral recovery. Based on this, the effects of nanobubbles(NBs) and hydrodynamic parameters on coarse quartz particle flotation were systematically investigated. Mechanical flotation experiments were carried out using the 7 cm and 9 cm diameter impellers in order to produce different hydrodynamic conditions. 900–1300 rpm impeller speeds were used for the 7 cm diameter impeller and 554–786 rpm for the 9 cm diameter impeller. The results show that the presence of NBs increased the flotation recovery of à425 + 106 lm quartz by up to 21%. For the7 cm diameter impeller, the maximum flotation recoveries of 86.4% and 98% were obtained in the absence and presence of NBs at Reynolds number(Re) of 81,000 and 66,000, respectively. For the 9 cm diameter impeller, the maximum recoveries of 86.3% and 97.5% were obtained in the absence and presence of NBs at Re of 90,000 and 75,000, respectively. NBs increased the flotation rate constant up to 36%.

Optimization of Coarse Aggregate Content based on Efficacy Coefficient Method

The influence of coarse aggregate content on concrete properties was investigated.From the perspective of Frame Concrete Theory,six groups concrete were produced with the same proportion except for coarse aggregate content,with coarse aggregate content of 0%,40%,50%,60%,75%,and 80%,respectively.Slump,compressive and flexural tensile strengths,elastic modulus,and water penetration were tested to research the effect of coarse aggregate content on concrete.The experimental results reveal that slump reduces with increasing of coarse aggregate content,while compressive strength,elastic modulus and flexural tensile strength increase with the coarse aggregate content increasing,and water penetration reduces with coarse aggregate content increasing before 75% then increased.Workability,strength,durability and economical indexes system were established to optimize the coarse aggregate content in concrete based on efficacy coefficient method.The optimization results show that when coarse aggregate content is 60%,the system efficacy coefficient reaches to 0.89,and it expresses the better comprehensive performance.

coarse-grained CFD-DEM方法在不同流态流化床中的模拟验证

传统CFD-DEM方法的计算量随着系统内颗粒数目的增加而显著增加,coarse-grained CFD-DEM(粗颗粒)方法将若干个真实颗粒打包成虚拟颗粒从而显著减小系统计算量。在coarse-grained CFD-DEM方法进行应用之前,对其进行广泛的验证是有必要的。采用coarse-grained CFD-DEM方法模拟得到不同流态流化床的气固流动特征(固含率、压降、颗粒速度等),与传统CFD-DEM和实验测量吻合较好。另外,系统的计算效率随着粗颗粒放大系数的增加显著提升。研究表明,粗颗粒方法能够以较小的计算精度损失而使计算速度大幅提升,能够适用于大尺度稠密气固流动系统的模拟。

Shear behavior of coarse aggregates for dam construction under varied stress paths

Coarse aggregates are the major infrastructure materials of concrete-faced rock-fill dams and are consolidated to bear upper and lateral loads. With the increase of dam height, high confining pressure and complex stress states complicate the shear behavfor of coarse aggregates, and thus impede the high dam＇s proper construction, operation and maintenance. An experimental program was conducted to study the shear behavior of dam coarse aggregates using a large-scale triaxial shear apparatus. Through triaxial shear tests, the strain-stress behaviors of aggregates were observed under constant confining pressures： 300 kPa, 600 kPa 900 kPa and 1200 kPa. Shear strengths and aggregate breakage characteristics associated with high pressure shear processes are discussed. Stress path tests were conducted to observe and analyze coarse aggregate response under complex stress states. In triaxial shear tests, it was found that peak deviator stresses increase along with confining pressures, whereas the peak principal stress ratios decrease as confining pressures increase With increasing confining pressures, the dilation decreases and the contraction eventually prevails. Initial strength parameters （Poisson＇s ratio and tangent modulus） show a nonlinear relationship with confining pressures when the pressures are relatively low. Shear strength parameters decrease with increasing confining pressures. The failure envelope lines are convex curves, with clear curvature under low confining pressures. Under moderate confining pressures, dilation is offset by particle breakage. Under high confining pressures, dilation disappears.

Review on the decomposition and influence factors of coarse woody debris in forest ecosystem

Coarse woody debris （CWD） is an important and particular component of forest ecosystems and is extremely important to forest health. This review describes the decomposition process, decomposition model and influence factors. CWD decomposition is a complex and continuous process and characterizes many biological and physical processes, including biological respiration, leaching, and fragmentation. All these processes have closed relationships between each other and work synergistically. During decomposition, there are many controlling factors mainly including site conditions （temperature, humidity, and OJCO2concentration）, woody substrate quality （diameter, species and compound） and organism in CWD. The decomposition rate is generally expresses through a constant k which indicate the percent mass, volume or density loss over time, and can be determined by long-term monitoring, chronosequence approach and the radio between input and the total mass. Now using mathematical models to simulate decomposition patterns and estimate the decomposition rate is widely applied, especially the exponential model. We brought forward that managing and utilizing for the CWD in forest was a primary objective on all forest lands. And it is should be intensified to integrate many related research subjects and to carry a comprehensive, long-term and multi-scale research which mainly focus on seven sections.

Properties of coarse particles in suspended particulate matter of the North Yellow Sea during summer

Fine particles in seawater commonly form large porous aggregates. Aggregate density and settling velocity determine the behavior of this suspended particulate matter(SPM) within the water column.However, few studies of aggregate particles over a continental shelf have been undertaken. In our case study, properties of aggregate particles, including size and composition, over the continental shelf of the North Yellow Sea were investigated. During a scienti?c cruise in July 2016, in situ ef fective particle size distributions of SPM at 10 stations were measured, while temperature and turbidity measurements and samples of water were obtained from surface, middle, and bottom layers. Dispersed and inorganic particle size distributions were determined in the laboratory. The in situ SPM was divided into(1) small particles(<32 μm),(2) medium particles(32–256 μm) and(3) large particles(>256 μm). Large particles and medium particles dominated the total volume concentrations(VCs) of in situ SPM. After dispersion, the VCs of medium particles decreased to low values(<0.1 μL/L). The VCs of large particles in the surface and middle layers also decreased markedly, although they had higher peak values(0.1–1 μL/L). This suggests that almost all in situ medium particles and some large particles were aggregated, while other large particles were single particles. Correlation analysis showed that primary particles <32 μm in?uenced the formation of these aggregates. Microscopic examination revealed that these aggregates consisted of both organic and inorganic ?ne particles, while large particles were mucus-bound organic aggregates or individual plankton.The vertical distribution of coarser particles was clearly related to water strati?cation. Generally, medium aggregate particles were dominant in SPM of the bottom layer. A thermocline blocked resuspension of?ne material into upper layers, yielding low VCs of medium-sized aggregate particles in the surface layer.Abundant large biogenic particles were present in both surface and middle layers.

Wood density and carbon concentration of coarse woody debris in native forests,Brazil

Background: With the objective of increasing knowledge on biomass and carbon stocks, and thus improving the accuracy of published estimates, the present study explored wood density and carbon concentration of coarse woody debris (diameter≥10) by decay class in a Seasonal Semi-deciduous Forest (SSF) area in the Atlantic Rain Forest and in a Cerrado sensu-stricto (CSS) area (Brazilian savanna), in Brazil. Two strata were identified in each area and ten sampling units were systematic located in each stratum. Data were collected according to the line intersect sampling method. Each tallied element, the diameter, length, and perpendicular width were recorded at the transect intersection point. Each element was classified into a decay class, and the species was identified when possible. Sample discs were cut from each element, from which cylindrical samples were extracted and oven-dried to determine density. These cylinders were milled and analyzed using a LECO-C632 to determine carbon concentration as percentage of mass. Results: In both areas, wood density decreased as the decay class increased. For SSF the mean carbon concentration of all analyzed samples was 49.8% with a standard deviation of 3.3, with a range of 27.9–57.0% across 506 observations. For CSS the general mean was 49.6% with a standard deviation of 2.6, with a range of 31.2–54.5% over 182 observations. Carbon concentration barely change between decay classes. Carbon stock was estimated at 3.3 and 0.7 MgC/ha for the SSF and the CSS, respectively. Similar results were obtained when using a 50% conversion constant. Conclusions: The present study concludes that wood density decreases as the woody debris becomes more decomposed, a pattern found in many previous studies. The carbon concentration, however, barely changes between decay classes, and that result is consistent with most of the literature reviewed. Our carbon concentrations are very close to the 50% used most commonly as a conversion factor. We strongly recommend that future studies of CWD evaluate wood density and carbon concentration by decay class to address the uncertainty still found in the literature.

Precision Grinding of Reaction Bonded Silicon Carbide Using Coarse Grain Size Diamond Wheels

Reaction bonded SiC（RBSiC） is attractive for optical application because of its favorable properties and low fabrication cost. However, the difficultness and cost involved in RBSiC grinding limit its application. The investigation on high efficient and low-cost machining with good grinding quality is desired. Generally, high efficient machining for RBSiC is realized by using coarse grain size grinding wheels, but serious grinding damage is inevitable. In this paper, monolayer nickel electroplated coarse grain size diamond grinding wheels with grain sizes of 46 μm, 91 μm, and 151 μm were applied to the grinding of RBSiC. An electrolytic in-process dressing（ELID） assisted conditioning technique was first developed by using cup shape copper bonded conditioning wheels with grain sizes of 15 μm and 91 μm to generate the conditioned coarse grain size wheels with minimized wheel run-out error within 2 μm, constant wheel peripheral envelop as well as top-flattened diamond grains. Then, the grinding experiments on RBSiC were carried out to investigate the grinding performance and material removal mechanism. The experimental results indicate that the developed conditioning technique is applicable and feasible to condition the coarse grain size diamond wheels under optimal conditioning parameters, and the material removal mechanism involved in RBSiC grinding is the combination of brittle fracture and ductile deformation to generate smooth ground surface. This research is significant for the high efficient and low-cost precision grinding of RBSiC with good ground surface quality.

Coarse woody debris and wood-colonizing fungi differences between a reserve stand and a managed forest in the Taborz region of Poland

The aim of this research was to evaluate the amount of woody debris (m3/ha) on the forest floor and the associated wood-colonizing fungi. The study was performed in the Taborz region, known for its Scots pine provenance experiments, against the background of a recently launched Polish legislation to protect the biodiversity on the forest floor in managed (harvested) stands. We investigated a managed stand (136-years-old) and the reserve stand ‘Sosna Taborska’(261-years-old). In the reserve stand, the mean volume of woody debris was six times higher than in the managed forests, i.e. 65 versus 11 m3/ha. In addition, in the reserve stand, the number of fungi taxa colonizing the dead wood was larger than in the managed stands, with a higher number of fruitbodies. Total fungal richness was higher in the reserve than in the managed stand, i.e. 28 versus 12 species. The dominant taxa at both sites were Fomitopsis pinicola and Fomes The aim of this research was to evaluate the amount of woody debris (m^3/ha) on the forest floor and the associated wood-colonizing fungi. The study was performed in the Taborz region, known for its Scots pine provenance experiments, against the background of a recently launched Polish legislation to protect the biodiversity on the forest floor in managed (harvested) stands. We investigated a managed stand (136-years-old) and the reserve stand ‘Sosna Taborska’(261-years-old). In the reserve stand, the mean volume of woody debris was six times higher than in the managed forests, i.e. 65 versus 11 m^3/ha. In addition, in the reserve stand, the number of fungi taxa colonizing the dead wood was larger than in the managed stands, with a higher number of fruitbodies. Total fungal richness was higher in the reserve than in the managed stand, i.e. 28 versus 12 species. The dominant taxa at both sites were Fomitopsis pinicola and Fomes fomentarius, although some taxa were only found in the reserve (e.g., Stereum hirsutum). The volume of woody debris as well as the diversity of fungi in the managed stand were lower than in the reserve, albeit greater than in other Scots pine stands in Poland. These results testify to the gains in biodiversity yielded by the management conservation management approach at the reserve stand.

PREPARATION OF AMMONIUM PARATUNGSTATE WITH COARSE GRAIN BY EVAPORATING CRYSTALLIZATION

A new technology for the crystallization of ammonium paratungstate with coarse grain has beenstudied. The factors influencing the physi-chemical properties of ammonium paratungstate crystal, such astemperature, concentration, seed crystal, agitation. etc. were examined. It is necessary to keep high temperature and low concentration in the process. and the addition of seed crystal and agitation with air is also in favor of the system. Ammonium paratungstate crystal with particle size of 36-42 μm and apparent density of2. 0-2. 2 g·cm- 3 were obtained by controlling suitable technological parameters.

Entrance and Exit Defects During Coarse Pitch Orbital Drilling of Carbon Fiber Reinforced Plastic Plates

Formation of entrance and exit defects in coarse pitch orbital drilling(CPOD)of carbon fiber reinforced plastic(CFRP)plates was investigated.Deep observation on entrance and exit morphology shows tear and burr are typical defects.Meanwhile,tear is more obvious than burr,and more entrance tears emerge than exit tears.As one of the major causes of entrance and exit defects in CPOD,cutting forces were substaintially studied by contrast experiments.Then,the effect of cutting parameters on entrance and exit tear was qualitatively analyzed through a single factor test.Experiment results indicate that the variation of rotation speed has little influence on entrance and exit tear.Increasing tangential feed per tooth can enlarge entrance tear,but bring little effect on exit tear.By increasing axial feed pitch,the hole entrance and exit show severe tear.When revolution radius grows bigger and bigger,entrance and exit tear firstly decreases,and then increases.Finally,the models of tear and delamination during CPOD of CFRP were established,the formation mechanisms of entrance and exit defects were revealed,and the control strategies were accordingly put forward.

Status and distribution pattern of coarse woody debris along an altitudinal gradient in Askot Wildlife Sanctuary, Uttarakhand, West Himalaya

A rapid assessment on the status and distribution patterns of coarse woody debris （CWD） was conducted by laying five curvilinear transects （transects A, B, C, D and E; major trails）, along an altitudinal gradient starting from 900 to 2 600 m, in three major watersheds （Charigad, Dogarhigad and upper Gosigad） of Goriganga catchment in Askot Wildlife Sanctuary, India. At every 100 m rise in altitude a hectare plot （100 m x 100 m） was selected. Results showed that the percentage contribution by different succession phases was in the decreasing order： phase I 〉 phase II 〉 phase IV 〉 phase III for snags, and phase III〉 phase II 〉 phase IV 〉 phase I for logs. Snag density in chir pine forest was high in transect A （11 snags＇ha^-1） at 1 500 m, and the value in rianj oak forest was high in transect B （10 snags.ha-l） at 2 300 m. The total available mass of snags and logs in chit pine forest was 13.9 t, of which snags mass accounted for 41% of the total mass and logs mass for 59%. While the total value was 5.6 t in rianj oak forest, of which snags and logs accounted for 60% and 40% of the total mass, respectively. Moreover, the presence of CWD in the study area if not harvested, would provide a great opportunity to the orchids in future to flourish by providing protection. The high densities of snags and logs in chir pine forest at mid-altitudinal zone led to less species richness and lower density of ground flora as the zone receives more light, accompanying with lower soil moisture, and thus only the dominant species occupy the habitat.

Effect of titanium content on the refinement of coarse columnar austenite grains during the solidification of peritectic steel

The effect of titanium content on the refinement of austenite grain size in as-cast peritectic carbon steel was investigated by fast directional solidification experiments with simulating the solidification and growth of surface and subsurface austenite in continuously cast slabs.Transmission electron microscope(TEM)and scanning electron microscope(SEM)were used to analyze the size and distribution of Ti(C,N)precipitates during solidification.Based on these results,the pinning pressure of Ti(C,N)precipitates on the growth of coarse columnar grains(CCGs)was studied.The results show that the austenite microstructure of as-cast peritectic carbon steel is mainly composed of the regions of CCGs and fine columnar grains(FCGs).Increasing the content of titanium reduces the region and the short axis of the CCGs.When the content of titanium is 0.09wt%,there is no CCG region.Dispersed microscale particles will firstly form in the liquid,which will decrease the transition temperature from FCGs to CCGs.The chain-like nanoscale Ti(C,N)will precipitate with the decrease of the transition temperature.Furthermore,calculations shows that the refinement of the CCGs is caused by the pinning effect of Ti(C,N)precipitates.

Performance Degradation of the Repeated Recycled Aggregate Concrete with 70% Replacement of Three-generation Recycled Coarse Aggregate

The feasibility of using different generations recycled coarse aggregate（RCA） on structural concrete was fully evaluated by studying the performance of the recycled coarse aggregates and their corresponding concretes, the different generations of RCA were recycled by following the repeated mode of ‘concrete-waste concrete-coarse aggregate-concrete＇. Moreover, the focus was on ‘three generations＇ of repeated RCAs, the RCA was produced by crushing and regenerating the artificial accelerated degraded concrete, the process was designed to follow the nature degradation of the concrete with a coupling action of accelerated carbonation and bending load. The properties of x-generation（x=1, 2 or 3） of repeated RCA were systematically investigated and the compressive and splitting tensile strengths of relating structural concretes（with 70% replacement of x-generation of RCA） were studied accordingly. The results show a competent compressive and splitting tensile strength of 30 MPa at 28 th day of structural concretes with all generations of repeated RAC. And the gradual degraded performance of the repeated RCAs was observed with an increased numbers of repetition（1〉2〉3 generations）, the overall performances of all repeated RCAs fulfill the Class Ⅲ according to Chinese Standards GB25177-2010. Our gained insight demonstrates a feasibility of using at least 3 generations of repeated RCA for the production of normal structural concrete.