Deadwood position matters:Diversity and biomass of saproxylic beetles in a temperate beech forest

Deadwood plays a key role for biodiversity in forests.A significant number of beetles from this group are currently listed as endangered in the Red List.In addition to other management recommendations,there have been recent efforts to enrich stands with dead wood to promote biodiversity.An important parameter for forestry enterprises is the optimization of these interventions.The study investigated the abundance,species richness,gamma diversity,conservation value and biomass of saproxylic beetles in natural forests using window traps.A total of 89traps were used for saproxylic beetle monitoring,of which 29 were placed on lying logs,30 on snags and 30 as controls in forest stand space.A total of 35,011 beetles were recorded in 564 species(61 families).Notably,20,515 of these belong to saproxylic beetles(59%)in 311 species(55%),with 62 classified as Red-List species(20%).In the group of'all saproxylic beetles',the results indicate that a diversity and y diversity(q=0)remain consistent across various deadwood types,whileβdiversity showed significant differences.Significant differences were found in the Red-List species group,where a diversity and y diversity differed,with higher values observed in snags.Rarefaction based total species richness of site was estimated to be 391 species,including 74 Red-Listed species.Comparing the sample coverage of the studied stand categories showed that all saproxylic species exhibit a pronounced preference for inhabiting areas featuring lying logs.Conversely,Red-List species mainly inhabit snags,withβdiversity being more similar to snags and forest stand space.Notably,both the conservation value(weighted average by conservation status)and beetle biomass are significantly highest in snags,whereas stand space shows the lowest values across all measured saproxylic beetle indices.Furthermore,the use of traps set on the poles in forest stand space resulted in an underestimation of the actual stand richness by 20%-25%.Our results support the conclusion that snags are indispensable features in beech forests,playing a key role in promoting high species diversity,especially among Red-List species,and supporting the biomass of saproxylic beetles.Consequently,it becomes crucial to incorporate a higher percentage of standing deadwood in managed forests or actively create equivalent environments by introducing high stumps.

High-efficiency Carbonation Modification Methods of Recycled Coarse Aggregates

To solve the problem of only surface carbonation and realize high-efficiency carbonation of recycled coarse aggregate,the method of carbonated recycled coarse aggregate with nano materials pre-soaking was first put forward.The carbonation effect of modified recycled coarse aggregate with three different carbonation methods was evaluated,and water absorption,apparent density and crush index of modified recycled coarse aggregate were measured.Combined with XRD,SEM,and MIP microscopic analysis,the high-efficiency carbonation strengthening mechanism of modified recycled coarse aggregate was revealed.The experimental results show that,compared with the non-carbonated recycled coarse aggregate,the physical and microscopic properties of carbonated recycled coarse aggregate are improved.The method of carbonation with nano-SiO_(2) pre-soaking can realize the high-efficiency carbonation of recycled coarse aggregate,for modified recycled coarse aggregate with the method,water absorption is reduced by 23.03%,porosity is reduced by 44.06%,and the average pore diameter is 21.82 nm.The high-efficiency carbonation strengthening mechanism show that the pre-socked nano-SiO_(2) is bound to the hydration product Ca(OH)_(2) of the old mortar with nano-scale C-S-H,which can improve the CO_(2) absorption rate,accelerate the carbonation reaction,generate more stable CaCO_(3) and nano-scale silica gel,and bond to the dense three-dimensional network structure to realize the bidirectional enhancement of nano-materials and pressurized carbonation.It is concluded that the method of carbonation with nano-SiO_(2) pre-soaking is a novel high-efficiency carbonation modification of recycled coarse aggregate.

Cut stumps vs broken stumps:Does it make any difference in the maintenance of plant and lichen biodiversity in Central European mountain forests?

Fxcessive forest exploitation significantly contributes to land degradation and the creation of human-made deadwood.Stumps are sometimes ignored in studies on the biodiversity of coarse woody debris.We investigated whether the type of stump,i.e.broken stumps(naturally created)and cut stumps(formed during forestry operations)had an impact on the species composition and species diversity as well as due to this fact they can be characterized by plant indicators.The research covered 728 spruce stumps(287 broken and 441 cut stumps)that were inhabited by lichens,liverworts,mosses and vascular plants in mountain forest belt(Karkonosze Mts.,Poland).The following types of microhabitats were included in the research:the upper surface and the lateral surface of a stump with both bark and wood.There are statistically significant compositional differences between the two types of stumps,which was demonstrated by ordination analyses and indicator species analysis.According to the generalized linear models,the probability of occurrence increases in cut stumps in case of liverworts and vascular plants and also along the decomposition stages.The generalized linear mixed-effects model showed that there was a higher species richness of liverworts,mosses and vascular plants on the cut stumps and less drier but the reverse situation was in lichens.The generalized additive models for their cover showed similar trends.Almost all of the taxonomic groups were affected by altitude both in terms of species composition and total cover on the stumps.We concluded that cut stumps are an important type of deadwood for biodiversity and provide a convenient habitat,especially for many lichens and bryophytes.

Bond-Slip Behavior of Steel Bar and Recycled Steel Fibre-Reinforced Concrete

Recycled steel fiber reinforced concrete is an innovative construction material that offers exceptional mechanical properties and durability.It is considered a sustainable material due to its low carbon footprint and environmental friendly characteristics.This study examines the key influencing factors that affect the behavior of this material,such as the steel fiber volume ratio,recycled aggregate replacement rate,concrete strength grade,anchorage length,and stirrup constraint.The study investigates the bond failure morphology,bond-slip,and bond strength constitutive relationship of steel fiber recycled concrete.The results show that the addition of steel fibers at 0.5%,1.0%,and 1.5%volume ratios can improve the ultimate bond strength of pull-out specimens by 9.05%,6.94%,and 5.52%,respectively.The replacement rate of recycled aggregate has minimal effect on the typical bond strength of pull-out specimens.However,the ultimate bond strengths of pull-out specimens with concrete strength grades C45 and C60 have improved compared to those with C30 grade.The specimens with longer anchorage lengths exhibit lower ultimate bond strength,with a reduction of 33.19%and 46.37%for anchorage lengths of 5D and 7D,respectively,compared to those without stirrups.Stirrup restraint of 1φ8 and 2φ8 improves the ultimate bond strength by 5.29%and 6.90%,respectively.Steel fibers have a significant effect on the behavior of concrete after it cracks,especially during the stable expansion stage,crack instability expansion stage,and failure stage.

Changes in Polyphenols and Antioxidant Activities of Yingshan Yunwu Tea during Digestion in Vitro

[Objectives]To explore the change rule of polyphenol content and antioxidant activity of coarse old leaves of Yingshan Yunwu Tea in the process of human digestion.[Methods]The coarse and old leaves of Yunwu tea in Yingshan,Huanggang,Hubei Province were selected as the research object,and their digestion in vitro was simulated.The total polyphenol content was determined by Folin-phenol reagent colorimetric method,and the DPPH radical scavenging activity and total antioxidant activity were determined.[Results]After simulated gastrointestinal digestion in vitro,the polyphenol content and antioxidant activity of coarse old leaf tea soup showed a downward trend.After gastrointestinal digestion,the polyphenol content in tea infusion separately decreased by 31.8%and 8.5%;the scavenging rate of DPPH free radical was 97%before digestion,decreased to 92%after gastric digestion and 65%after intestinal digestion,which decreased by 5%and 27%,respectively;after gastrointestinal digestion,the total antioxidant capacity of tea soup decreased by 4.7%and 3.1%,respectively.[Conclusions]This study provided a reference for the development and application of coarse old leaves of Yingshan Yunwu tea,and provided a reference for the nutritional value evaluation and comprehensive utilization of coarse old leaves,so as to make the best use of coarse tea leaves and reduce the waste of resources.

Effect of Lateritic Stone Aggregate and Coconut Husk Fiber on the Properties of Concrete

Natural stone aggregate forms the bulk volume of concrete and has contributed to the increased cost of concrete production. This has led to the search for alternate aggregates such as lateritic stone for concrete production. This paper investigates the engineering properties of concrete produced with lateritic aggregate (LA) as the coarse aggregate replacement and coconut husk fibre (CHF) as reinforcement. Natural stone aggregate was replaced by LA at 0%, 10%, 20%, 30%, 40%, and 50%, with 0.25% constant CHF by weight. A mix proportion of 1:1.5:3 with a water-cement ratio of 0.6 was used for producing concrete. A total of 162 specimens (90 cubes and 72 beams) were prepared and tested at the 7, 14, 21, and 28 days of curing. The highest compressive strength was 43.36 N/mm2 (10% LA replacement) as compared to the control of 41.51 N/mm2. The 10% LA replacement obtained the highest flexural strength of 5.35 N/mm2 as compared with the 5.29 N/mm2 for the control. The water absorption of the concrete increased from 2.8% (control) to 3.57% (50% replacement LA). Scanning electron microscopy (SEM) revealed micro gaps between CHF and LA concrete. The study, therefore, concludes that the use of LA and CHF positively influenced the strength properties of concrete. 10% LA replacement of coarse aggregate and 0.25% CHF is recommended to practitioners for use.

Research on Heredity of Coarse Ferrite Grains

The changes in austenite grain size of the specimens with coarse ferrite grains under different heat treatment process were investigated.The focus was on studying the effect of annealing on refining coarse ferrite grains,as well as the influence of the ferrite grain size on the main technical indicators of gas carburizing.The results show that coarse ferrite grains may not necessarily cause the coarse austenite grains,but may result in mixed austenite grains.After annealing treatment,the coarse ferrite grains can be significantly refined and homogenized.Moreover,the coarse ferrite grains have no significant effects on hardnessand intergranular oxidationof gas carburizing.

Effect of High Temperature Curing on the Frost Resistance of Recycled Aggregate Concrete and the Physical Properties of Second-Generation Recycled Coarse Aggregate under Freeze-Thaw Cycles

With the emphasis on environmental issues,the recycling of waste concrete,even recycled concrete,has become a hot spot in the field of architecture.But the repeated recycling of waste concrete used in harsh environments is still a complex problem.This paper discusses the durability and recyclability of recycled aggregate concrete(RAC)as a prefabricated material in the harsh environment,the effect of high-temperature curing(60℃,80℃,and 100℃)on the frost resistance of RAC and physical properties of the second generation recycled coarse aggregate(RCA_(2))of RAC after 300 freeze-thaw cycles were studied.The frost resistance of RAC was characterized by compressive strength,relative dynamic elastic modulus,and mass loss.As the physical properties of RCA_(2),the apparent density,water absorption,and crushing value were measured.And the SEM images of RAC after 300 freeze-thaw cycles were shown.The results indicated that the frost resistance of RAC cured at 80℃ for 7 days was comparable to that cured in the standard condition(cured for 28 days at 20℃±2℃ and 95%humidity),and the RAC cured at 100℃ was slightly worse.However,the frost resistance of RAC cured at 60℃ deteriorated seriously.The RAC cured at 80℃ for 7 days is the best.Whether after the freeze-thaw cycle or not,the RCA that curd at 60℃,80℃,and 100℃ for 7 days can also meet the requirements of Grade III RCA and be used as the aggregate of non-bearing part of prefabricated concrete components.RCA_(2) which is cured at 80℃ for 7 days had the best physical properties.

Changes in soil microbial communities induced by warming and N deposition accelerate the CO 2 emissions of coarse woody debris

Warming and nitrogen(N)deposition are two important drivers of global climate changes.Coarse woody debris(CWD)contains a large proportion of the carbon(C)in the total global C pool.The composition of soil microbial communities and environmental changes(i.e.,N deposition and warming)are the key drivers of CWD decomposition,but the interactive impact between N deposition and warming on the composition of soil microbial communities and CWD decomposition is still unclear.In a laboratory experiment,we study and simulate respiration during decomposition of the CWD(C 98)of Cryptomeria japonica(CR)and Platycarya strobilacea(PL)in response to warming and N deposition over 98 days.Resuts show that either warming or N addition signifi cantly accelerated the C 98 of the two tree species by altering the soil microbial community(bacterial:fungi and G+:G–).The combined treatment(warming+N)resulted in a decomposition eff ect equal to the sum of the individual eff ects.In addition,the species composition of bacteria and fungi was obviously aff ected by warming.However,N deposition had a remarkable infl uence on G+:G–.Our results indicated that N deposition and warming will observably alter the composition and growth of the microbial community and thus work synergistically to accelerate CWD decomposition in forest ecosystems.We also present evidence that N deposition and warming infl uenced the composition and balance of soil microbial communities and biogeochemical cycling of forest ecosystems.

Effect of variations in the polar and azimuthal angles of coarse particles on the structure of drainage channels in thickened beds

The 3D reconstruction and quantitative characterization of drainage channels and coarse tailings particles in a bed were conducted in this study.The influence of variations in the azimuthal angle(θ)and polar angle(φ)of coarse particles on drainage channel structure was analyzed,and the drainage mechanism of the bed was studied.Results showed that water discharge in the bed reduced the size of pores and throat channels,increasing slurry concentration.The throat channel structure was a key component of the drainage process.Theφandθof particles changed predominantly along the length direction.The changes inφhad a cumulative plugging effect on the drainage channel and increased the difficulty of water discharge.The rake and rod formed a shear ring in the tailings bed with shear,and theθdistribution of particles changed from disorderly to orderly during the rotation process.The drainage channel was squeezed during the shearing process with the change inθ,which broke the channel structure,encouraged water discharge in the bed,and facilitated a further increase in slurry concentration.The findings of this work are expected to offer theoretical guidance for preparing high-concentration underflow in the tailings thickening process.

Influence of the Granular Class of Crushed Granites on the Litho-Stabilization of Samo Laterites (South-East of Côte d’Ivoire)

Most of the laterites found in Ivory Coast do not meet the technical conditions to be used in their natural state for the design of road foundations. Also, to meet the growing needs for road materials, various amendments are made to them, including litho-stabilization. Thus, this study proposes to understand the influence of the granular class of natural aggregates on the performance of laterites. To achieve this objective, different proportions of crushed granites of class 0/5, 0/15 and 5/15 have been incorporated into the soils of southern Côte d’Ivoire, especially in Samo. This modified soil has been subjected to mechanical tests such as the modified Proctor and CBR test. The results obtained show that the dry densities of the incorporated laterites containing crushed granites increase with the content of natural aggregates and decrease with the increase in the water content. Likewise, the CBR bearing indices at 95% of the Modified Optimum Proctor of the different compositions (laterites + crushed granites) increase with the proportion of aggregates. The addition of coarse aggregates to the laterites therefore promotes the establishment of a framework which improves its bearing capacity. From 20% to 30% crushed granites respectively of class 0/15;0/5 and 5/15, the values of the CBR obtained are greater than those of 30% therefore these modified soils can be used as a foundation layer for traffic of T1, T2 and T3 type. Likewise, the laterites’ mixtures with at least 40% crushed granites of class 0/15 and 0/5 can also be used for the foundation and base layers.

西藏色季拉山急尖长苞冷杉原始林粗木质残体空间格局分析

粗木质残体(Coarse woody debris,CWD)的空间格局反映了森林群落的死亡格局和干扰格局,在一定程度上体现了群落内林木的死亡过程。采用相邻网格法对色季拉山急尖长苞冷杉(Abies georgei var.smithii)原始林1 hm^2固定样地内CWD进行调查,从CWD类型、腐烂等级、径级3个方面对CWD空间分布格局进行分析。结果表明:样地内CWD总密度为582株/hm^2,倒木占55.33%,是CWD的主要输入形式。CWD密度在腐烂等级上的分布可用多项式拟合(R^2=0.9973),在径级上的分布可用指数衰减模型拟合(R^2=0.9746),且在不同类型、腐烂等级及径级上的分布差异较大。在50 m尺度内,CWD整体表现为小尺度的集群分布和中、大尺度的随机分布。在3种CWD分类中,仅有大枯枝、Ⅰ级腐烂、径级ⅠCWD在小尺度或中尺度表现为较强的集群分布,其余则均以随机分布为主,只是在个别尺度达到或接近集群分布。不同类型CWD间整体关联不显著,只有枯立木与大枯枝在0—21 m尺度内达到显著负关联。CWD空间分布格局是急尖长苞冷杉原始林的重要结构特征,在很大程度上决定着林下植物群落及林型自然更新格局。

Effects of Ta C on microstructure and mechanical properties of coarse grained WC-9Co cemented carbides

Coarse grained WC-9Co cemented carbides with 0-1.0% TaC(mass fraction) were fabricated by HIP-sintering and gas quenching. The effects of TaC on the microstructures and mechanical properties were investigated using scanning electron microscopy(SEM), energy dispersive X-ray analysis(EDS), X-ray diffractometry(XRD) and mechanical properties tests. The results show that the maximum values of hardness and strength are HV 1124 and 2466 MPa respectively when 0.4% TaC is added. When the content of TaC is more than 0.6%, the grain size of WC is no longer affected by the amount of TaC, and(W,Ta)C occurs as well. Moreover, the strength and fracture toughness increase and the(Ta+W) content decreases with the increase of TaC content. The dependence of(Ta+W) content on the mechanical properties indicates that(Ta+W) content in Co should be decreased as low as possible to improve the mechanical properties of coarse grained WC-TaC-9Co cemented carbides with the microstructure of WC+γ two phase regions.

High temperature deformation behavior and optimization of hot compression process parameters in TC11 titanium alloy with coarse lamellar original microstructure

The high temperature deformation behaviors of α＋β type titanium alloy TC11 （Ti-6.5Al-3.5Mo-1.5Zr-0.3Si） with coarse lamellar starting microstructure were investigated based on the hot compression tests in the temperature range of 950-1100 ℃ and the strain rate range of 0.001-10 s-1. The processing maps at different strains were then constructed based on the dynamic materials model, and the hot compression process parameters and deformation mechanism were optimized and analyzed, respectively. The results show that the processing maps exhibit two domains with a high efficiency of power dissipation and a flow instability domain with a less efficiency of power dissipation. The types of domains were characterized by convergence and divergence of the efficiency of power dissipation, respectively. The convergent domain in a＋fl phase field is at the temperature of 950-990 ℃ and the strain rate of 0.001-0.01 s^-1, which correspond to a better hot compression process window of α＋β phase field. The peak of efficiency of power dissipation in α＋β phase field is at 950 ℃ and 0.001 s 1, which correspond to the best hot compression process parameters of α＋β phase field. The convergent domain in β phase field is at the temperature of 1020-1080 ℃ and the strain rate of 0.001-0.1 s^-l, which correspond to a better hot compression process window of β phase field. The peak of efficiency of power dissipation in ℃ phase field occurs at 1050 ℃ over the strain rates from 0.001 s^-1 to 0.01 s^-1, which correspond to the best hot compression process parameters of ,8 phase field. The divergence domain occurs at the strain rates above 0.5 s^-1 and in all the tested temperature range, which correspond to flow instability that is manifested as flow localization and indicated by the flow softening phenomenon in stress-- strain curves. The deformation mechanisms of the optimized hot compression process windows in a＋β and β phase fields are identified to be spheroidizing and dynamic recrystallizing controlled by self-diffusion mechanism, respectively. The microstructure observation of the deformed specimens in different domains matches very well with the optimized results.

Design of dense gap-graded friction course mixture

The design procedure of a dense gap-graded friction course（DGGFC） with coarse aggregate void filling method is presented. Testing results show that a DGGFC mixture possesses a dense stone-matrix structure, good stability and almost the same texture depth as stone matrix asphalt （SMA）. It also has a coarse and even surface after paving and has no separation during construction. It is durable and impermeable. It balances and improves the inherent inconsistency of asphalt mixture between the large texture depth for skid resistance and the impermeability for durability. The actual application in the Nanning-Liuzhou Expressway also shows that the performance of the DGGFC is as excellent as that of SMA, while the DGGFC mixture is cheaper than SMA. The DGGFC mixture is good for wearing course of pavement. Further research on DGGFC can be helpful for improving the surface skid resistance, prolonging the life-span period and reducing the construction costs of asphalt pavement.

EFFECT OF LOCAL HARD ZONE ONFRACTURE INITIATION OF WELD HAZ

The effect of the local hard zone (LHZ) distributed in the coarse grained HAZ (CGHAZ) has been analyzed by 2-dimensional FEM on a mechanical model of the weld CGHAZ. The existence of the LHZ elevates considerably the stress in LHZ and causes the discontinuity of strain at the boundary between the LHZ and the matrix. The stress distribution in the LHZ is strongly affected by the shape of the LHZ. In a slender LHZ almost the whole region in the LHZ is exposed to elevated stress, whereas in the massive LHZ only the edge region sustains high stress. The longer the LHZ becomes, the more the highly stressed area, and the peak stress in the LHZ grows even under the same volume fraction of the LHZ. These results indicate that the slender LHZ brings about unstable fracture at a lower load level than the blocky LHZ. This tendency was confirmed by CTOD test results on the weld CGHAZ of a high-strength steel. The CGHAZ with elongated M-A constituents fractures at apparently lower critical CTOD than the CGHAZ with massive M-A constituents. In conclusion, the control of the shape of the M-A constituent has a striking effect on the toughness improvement of CGHAZ.

Discrete element modeling of migration and evolution rules of coarse aggregates in the static compaction process

To investigate migration and evolution rules of coarse aggregates in the static compaction process, an algorithm of generating digital coarse aggregates that can reflect real morphology（ such as shape, size and fracture surface） of aggregate particles, is represented by polyhedral particles based on the discrete element method（ DEM）. A digital specimen comprised of aggregates and air voids is developed. In addition,a static compaction model consisting of a digital specimen and three plates is constructed and a series of evaluation indices such as mean contact force σMCF, wall stress in direction of zcoordinate σWSZZ, porosity and coordination numbers are presented to investigate the motion rules of coarse aggregates at different compaction displacements of 7. 5, 15 and 30 mm. The three-dimensional static compaction model is also verified with laboratory measurements. The results indicate that the compaction displacements are positively related to σMCF and σWSZZ, which increase gradually with the increase in iterative steps. When the compaction proceeds, the digital specimen porosity decreases, but the coordination number increases. The variation ranges of these four indices are different at different compaction displacements. This study provides a method to analyze the compaction mechanism of particle materials such as asphalt mixture and graded broken stone.

基于一种NAND闪存页缓存器设计的C/F读取算法研究

为减小共源线噪声对NAND闪存读可靠性的影响,设计了一种可实现C/F(Coarse/Fine)读取操作的页缓存器电路,并设计实现了适用于此电路的C/F读取算法,显著减小了共源线噪声.该算法通过两次子读感应读取存储单元,在第一次子读感应中分辨出阈值电压较低的存储单元并标记在页缓存器中,使其不再进行第二次子读感应,从而减小共源线噪声引起的阈值偏移.电路仿真计算表明,该支持C/F读取算法的页缓存器结构能够减小阈值偏移至少495. 6mV,有效提高了NAND闪存读操作的精确性.

Effects of nanobubble and hydrodynamic parameters on coarse quartz flotation

Quartz, the second most abundant mineral in the earth's crust, is a gangue mineral in practically every flotation process. Coarse quartz flotation has been a long standing problem in various mineral processing plants to reduce milling cost and increase valuable mineral recovery. Based on this, the effects of nanobubbles(NBs) and hydrodynamic parameters on coarse quartz particle flotation were systematically investigated. Mechanical flotation experiments were carried out using the 7 cm and 9 cm diameter impellers in order to produce different hydrodynamic conditions. 900–1300 rpm impeller speeds were used for the 7 cm diameter impeller and 554–786 rpm for the 9 cm diameter impeller. The results show that the presence of NBs increased the flotation recovery of à425 + 106 lm quartz by up to 21%. For the7 cm diameter impeller, the maximum flotation recoveries of 86.4% and 98% were obtained in the absence and presence of NBs at Reynolds number(Re) of 81,000 and 66,000, respectively. For the 9 cm diameter impeller, the maximum recoveries of 86.3% and 97.5% were obtained in the absence and presence of NBs at Re of 90,000 and 75,000, respectively. NBs increased the flotation rate constant up to 36%.

Digital Coarse Tuning Loop for Wide-Band Fast-Settling Dual-Loop Frequency Synthesizers

A new coarse tuning loop for a wide-band dual-loop frequency synthesizer is presented. The coarse tuning structure is composed of two digital modules, including a successive approximation register and a frequency comparator with a novel structure. The frequency comparator counts the prescaler cycles within a certain reference time and compares the number with preset data to estimate the VCO frequency. The frequency comparison error is analyzed in detail. Within a given coarse tuning time,our proposed structure shows a comparison error 20 times smaller than that of other reported structures. This structure also reuses the programmable divider as a part of the coarse tuning loop so that the circuit is greatly simplified.