The present paper aims at introducing Shear-Sensitive Liquid Crystal Coating(SSLCC)technology into compressor cascade measurement for the first time and serves as a basis for better understanding of the influence from...The present paper aims at introducing Shear-Sensitive Liquid Crystal Coating(SSLCC)technology into compressor cascade measurement for the first time and serves as a basis for better understanding of the influence from the boundary layers. Optical path layout, which is the most significant difficulty in internal flow field measurement, will be solved in this paper by selfdesigned image acquisition device. Massive experiments with different Mach number and incidence are conducted at a continuous subsonic cascade wind tunnel to capture the boundary layer phenomenon. Image processing methods, such as Three-Dimensional(3-D) reconstruction and Hue conversion, are used to improve the accuracy for transition position detection. The analysis of the color-images indicates that complex flow phenomena including transition, flow separation,and reattachment are captured successfully, and the effect of Mach number and incidence on the boundary layer flow is also discussed. The results show that: the Mach number has a significant effect on transition position; the incidence has little effect on transition position, but it has a great impact on the transition distance and leading-edge separation; influenced by the end-walls, the reattachment occurs in advance under positive angle of attack conditions.展开更多
Design and preparation of frequency doubling antireflection coating with different thicknesses of interlayer were investigated for LIB3O5 (LBO) substrate. The design was based on the vector method. The thickness of ...Design and preparation of frequency doubling antireflection coating with different thicknesses of interlayer were investigated for LIB3O5 (LBO) substrate. The design was based on the vector method. The thickness of the inserted SiO2 interlayer could be changed in a wide range for the four-layer design with two zeros at 1064 and 532 nm. The coatings without any interlayer and with 0.1 quarter-wave (λ/4), 0.3 λ/4, 0.5 λ/4 SiO2 interlayer were deposited respectively on LBO by using electron beam evaporation technique. All the prepared coatings with SiO2 interlayer indicated satisfying optical behavior. This expanded our option for the thickness of an interlayer when coating on LBO substrate. The prepared films with SiO2 interlayer showed better adhesion than that without any interlayer. The thickness of the interlayer affected the adhesion, the adhesion for the coating with 0.5 λ/4 SiO2 interlayer was not as good as the other two.展开更多
基金co-supported by the National Natural Science Foundation of China(No.51476132)the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(No.CX201713)the 111 Project(No.B17037)
文摘The present paper aims at introducing Shear-Sensitive Liquid Crystal Coating(SSLCC)technology into compressor cascade measurement for the first time and serves as a basis for better understanding of the influence from the boundary layers. Optical path layout, which is the most significant difficulty in internal flow field measurement, will be solved in this paper by selfdesigned image acquisition device. Massive experiments with different Mach number and incidence are conducted at a continuous subsonic cascade wind tunnel to capture the boundary layer phenomenon. Image processing methods, such as Three-Dimensional(3-D) reconstruction and Hue conversion, are used to improve the accuracy for transition position detection. The analysis of the color-images indicates that complex flow phenomena including transition, flow separation,and reattachment are captured successfully, and the effect of Mach number and incidence on the boundary layer flow is also discussed. The results show that: the Mach number has a significant effect on transition position; the incidence has little effect on transition position, but it has a great impact on the transition distance and leading-edge separation; influenced by the end-walls, the reattachment occurs in advance under positive angle of attack conditions.
文摘Design and preparation of frequency doubling antireflection coating with different thicknesses of interlayer were investigated for LIB3O5 (LBO) substrate. The design was based on the vector method. The thickness of the inserted SiO2 interlayer could be changed in a wide range for the four-layer design with two zeros at 1064 and 532 nm. The coatings without any interlayer and with 0.1 quarter-wave (λ/4), 0.3 λ/4, 0.5 λ/4 SiO2 interlayer were deposited respectively on LBO by using electron beam evaporation technique. All the prepared coatings with SiO2 interlayer indicated satisfying optical behavior. This expanded our option for the thickness of an interlayer when coating on LBO substrate. The prepared films with SiO2 interlayer showed better adhesion than that without any interlayer. The thickness of the interlayer affected the adhesion, the adhesion for the coating with 0.5 λ/4 SiO2 interlayer was not as good as the other two.