Quantitative assessment of the surface crack density in thermal barrier coatings

In this paper, a modified shear-lag model is developed to calculate the surface crack density in thermal barrier coatings（TBCs）. The mechanical properties of TBCs are also measured to quantitatively assess their surface crack density. Acoustic emission（AE） and digital image correlation methods are applied to monitor the surface cracking in TBCs under tensile loading. The results show that the calculated surface crack density from the modified model is in agreement with that obtained from experiments. The surface cracking process of TBCs can be discriminated by their AE characteristics and strain evolution. Based on the correlation of energy released from cracking and its corresponding AE signals, a linear relationship is built up between the surface crack density and AE parameters, with the slope being dependent on the mechanical properties of TBCs.

AFM Analysis of TiN, TiAlN, and TiAlSiN Coatings Prepared by Cathodic Arc Ion Plating

The TiN, TiAlN, and TiAlSiN coatings were prepared on YT14 cutting tool surface with CAIP（cathode arc ion plating）, the surface morphologies and phases were analyzed with FESEM（field emission scanning electron microscopy）, and XRD（X-ray diffraction）, respectively, and the coating parameters such as 3D surface micro-topography, grain size, surface height, hierarchy, profile height, and power spectral density, etc, were measured with AFM（atomic force microscope）. The results show that the phases of TiN, TiAlN, and TiAlSiN coatings are TiN, TiN＋TiAlN, TiN＋Si_3N_4＋TiAlN, respectively, while the surface roughness Sa of TiN, TiAlN, and TiAlSiN coatings is 75.3, 98.9, and 42.1 nm, respectively, and the roughness depth Sk is 209, 389, and 54 nm, respectively, the sequence of average grain sizes is TiAlN〉TiN〉TiAlSiN. The surface bearing index Sbi of TiN, TiAlN, and TiAlSiN coatings is 0.884, 1.01, and 0.37, respectively, and the sequence of surface bearing capability is TiAlN〉TiN〉TiAlSiN. At the lower wavelength（102-103 nm）, the power spectral densities have a certain correlation, and the sequence of TiN〉TiAlN〉TiAlSiN, while the correlation is low at the higher wavelength（〉103 nm）.

Impact of density of coating agent on antibacterial activity of silver nanoparticle impregnated plasma treated activated carbon

To use stabilized nanoparticles（NPs） in water as disinfectants over a very long period, the amount of coating agent（for NP stabilization） needs to be optimized. To this end, silver nanoparticles（Ag-NPs） with two different coating densities of tri-sodium citrate（12.05 and46.17 molecules/nm2, respectively）, yet of very similar particle size（29 and 27 nm, respectively）were synthesized. Both sets of citrate capped NPs were then separately impregnated on plasma treated activated carbon（AC）, with similar Ag loading of 0.8 and 0.82 wt.%, respectively. On passing contaminated water（containing 10~4 CFU Escherichia coli/m L of water） through a continuous flow-column packed with Ag/AC, zero cell concentration was achieved in 22 and 39 min, with Ag-NPs（impregnated on AC, named as Ag/AC） having lower and higher coating density, respectively. Therefore, even on ensuring similar Ag-NP size and loading, there is a significant difference in antibacterial performance based on citrate coating density in Ag/AC.This is observed in lower coating density case, due to both：（i） higher Ag~＋ ion release from Ag-NP and（ii） stronger binding of individual Ag-NPs on AC. The latter ensures that, Ag-NP does not detach from the AC surface for a long duration. TGA-DSC shows that Ag-NPs with a low coating density bind to AC with 4.55 times higher adsorption energy, compared to Ag/AC with a high coating density, implying stronger binding. Therefore, coating density is an important parameter for achieving higher antibacterial efficacy, translating into a faster decontamination rate in experiments, over a long period of flow-column operation.