A thermal elasto-plastic asperity contact model is investigated, which takes into account the steady-state heat transfer and the asperity distortion due to thermal elasto-plastic deformations. A hard coating and a sof...A thermal elasto-plastic asperity contact model is investigated, which takes into account the steady-state heat transfer and the asperity distortion due to thermal elasto-plastic deformations. A hard coating and a soft coating are applied to study the correlations between contact area and contact pressure, average gap and contact pressure, coating thickness and contours of the contact stress distribution, etc. The effects of material properties, coating thickness, frictional coefficient, and the heat input combinations on the stress distribution are investigated and discussed. The frictional heat input increases the maximum value of yon Mises stress. Finally, the appropriate thickness of the hard coating is also discussed. To protect the substrate, one can choose hard coating and the thickness of that is suggested that can be hc=70 Rm.展开更多
The surface morphology of Zn O films at different annealing temperatures and the performance of polymer solar cells(PSCs) with Zn O as the electron transport layer are studied.The low temperature sol-gel processed Zn ...The surface morphology of Zn O films at different annealing temperatures and the performance of polymer solar cells(PSCs) with Zn O as the electron transport layer are studied.The low temperature sol-gel processed Zn O film has smoother surface than that in higher temperature,which results in the best photovoltaic performance with a power conversion efficiency(PCE) of 3.66% for P3HT:PC61BM based solar cell.With increasing annealing temperature,the photovoltaic performance first deceases and then increases.It could be ascribed to the synergy effects of interface area,the conductivity and surface energy of Zn O film and series resistance of devices.展开更多
基金National Natural Science Foundation of China (No.50475146)Specialized Research Fund for the Doctoral Program of Higher Education of Ministry of Education,China (No.20030699035)+1 种基金Natural Science Foundation of Shaanxi Province,China (No.2004E_225,No.2005E_226)Northwestern Polytechnical University Foundation for Fundamental Research (NPU-FFR-20060500W018101)
文摘A thermal elasto-plastic asperity contact model is investigated, which takes into account the steady-state heat transfer and the asperity distortion due to thermal elasto-plastic deformations. A hard coating and a soft coating are applied to study the correlations between contact area and contact pressure, average gap and contact pressure, coating thickness and contours of the contact stress distribution, etc. The effects of material properties, coating thickness, frictional coefficient, and the heat input combinations on the stress distribution are investigated and discussed. The frictional heat input increases the maximum value of yon Mises stress. Finally, the appropriate thickness of the hard coating is also discussed. To protect the substrate, one can choose hard coating and the thickness of that is suggested that can be hc=70 Rm.
基金supported by the Independent Innovation Foundation of Shandong University(No.2014YQ015)
文摘The surface morphology of Zn O films at different annealing temperatures and the performance of polymer solar cells(PSCs) with Zn O as the electron transport layer are studied.The low temperature sol-gel processed Zn O film has smoother surface than that in higher temperature,which results in the best photovoltaic performance with a power conversion efficiency(PCE) of 3.66% for P3HT:PC61BM based solar cell.With increasing annealing temperature,the photovoltaic performance first deceases and then increases.It could be ascribed to the synergy effects of interface area,the conductivity and surface energy of Zn O film and series resistance of devices.