Simple, Selective, and Sensitive Spectrophotometric Method for Determination of Trace Amounts of Nickel(Ⅱ), Copper (Ⅱ), Cobalt (Ⅱ), and Iron (Ⅲ) with a Novel Reagent 2-Pyridine Carboxaldehyde Isonicotinyl Hydrazone

A selective and sensitive reagent of 2-pyridine carboxaldehyde isonicotinyl hydrazone（2-PYAINH） was synthesized and studied for the spectrophotometric determination of nickel, copper, cobalt, and iron in detail. At a pH value of 7.0, 9,0, 9.0, and 8.0, respectively, which greatly increased the selectivity; nickel, copper, cobalt, and iron reacted with 2-PYAINH to form a 1：2 yellow-orange, 1：2 yellow-green, 1：2 yellow and 1：1 yellow complexes, with absorption peaks at 363, 352, 346, and 359 nm, respectively. Under the optimal conditions, Beer＇s law was obeyed over the ranges of 0.01-1.4, 0.01-1.5, 0.01-2.7, and 0.01-5.4 mg/L respectively. The apparent molar absorptivity and Sandell＇s sensitivities were 8.4×10^4, 5.2×10^4, 7.1×10^4, and 3.9×10^4 L·mol^-l·cm^-1, respectively, and 0.00069, 0.0012, 0.00078, and 0.0014 μg·cm2, respectively. The detection limits were found to be 0.001, 0.002, 0.003, and 0.01 mg/L, respectively. The detailed study of various interfering ions to make the method more sensitive was carried out and selective and several real samples were analyzed with satisfactory results.

Study on Cobalt(Ⅱ)Ionprobe for Cysteine Determination

A spectrophotometric method for the determination of cysteine was developed basing on the reaction of cysteine with cobalt (Ⅱ) in NH 4Cl NH 4OH. The molar absorptivity is 7.98×10 3 L·mol -1 ·cm -1 at 284 nm. Beer′s law is obeyed for cysteine in the range of 0～2.0×10 -4 mol·L -1 . The method was applied to the assay of cysteine in urine.

Simultaneous spectrophotometric determination of cobalt,copper and nickel using 1-(2-thiazolylazo)-2-naphthol by chemometrics methods

The simultaneous determination of cobalt, copper and nickel using 1-（2-thiazolylazo）-2-naphthol （first figure of this article） by spectrophotometric method is a difficult problem in analytical chemistry, due to spectral interferences. By multivariate calibration methods, such as partial least squares （PLS） regression, it is possible to obtain a model adjusted to the concentration values of the mixtures used in the calibration range. Orthogonal signal correction （OSC） is a preprocessing technique used for removing the information unrelated to the target variables based on constrained principal component analysis. OSC is a suitable preprocessing method for PLS calibration of mixtures without loss of prediction capacity using spectrophotometric method. In this study, the calibration model is based on absorption spectra in the 550-750-nm range for 21 different mixtures of cobalt, copper and nickel. Calibration matrices were formed from samples containing 0.05-1.05, 0.05-1.30 and 0.05-0.80 μg·mL^-1 for cobalt, copper and nickel, respectively. The root mean square error of prediction （RMSEP） for cobalt, copper and nickel with OSC and without OSC were 0.007, 0.008, 0.011 and 0.031,0.037, 0.032 μg· mL^-1, respectively. This procedure allows the simultaneous determination of cobalt, copper and nickel in synthetic and real samples and good reliability of the determination was proved.

Catalytic Wave of Cobalt and its Analytical Application in Rapid Determination of Trace Cobalt in Complex Zinc Electrolyte Solution

A polarographic catalytic wave of cobalt in the substrate solution (pH=8.5) of diacetyldioxime potassium pyrophosphate ammonium chloride was studied and a new method for rapid determination of trace cobalt in complex zinc electrolyte solution was developed. The results show that there is a very sensitive catalytic wave of cobalt at 1.23 V. At least three hundred thousand fold Zn 2+ does not affect the determination of cobalt. The method is easy to operate and rapid, and when the signal to noise rate equals 2, the detection limit is 6×10 -9 mol·L -1 . A good linear relationship exists between the concentration of cobalt within 0.001 ～3.0 μg·mL -1 and the peak current. The method has successfully been used in the determination of trace cobalt in complex solution of the workshop for electrolyzing zinc.

Trace determination of cobalt ion by using malic acid-malonic acid double substrate oscillating chemical system

A novel kinetic method for determination of trace amounts of cobalt ion was proposed and validated. The method is based on adding malic acid into classical Belousov-Zhabotinskii （B-Z） oscillating chemical system to form a double substrate one. The results showed that when the concentration of cobalt ion was in the range of 5.27× 10^-8 to 5.37 × 10^-12 mol L^-1, the change of the oscillating period was directly proportional to the negative logarithm of cobalt ion concentration. The sensitivity and precision of the developed method were quite satisfactory. The limit of detection was down to 5.20 × 10^-13 mol L^-1 which was a highest sensitivity found for determination of metal ions using oscillating chemical reaction so far. Some factors influencing the determination were also examined. The method has been successfully used to determine cobalt ion in vitamin B12 injection.

SIMULTANEOUS DETERMINATION OF Cu(Ⅱ),Zn(Ⅱ),Fe(Ⅱ),Mn(Ⅱ),Co(Ⅱ) AND Ni(Ⅱ) WITH A SINGLE SWEEP POLAROGRAPHY

A new method of simultaneous determining Cu(Ⅱ), Zn(Ⅱ), Fe(Ⅱ), Mn(Ⅱ), Co(Ⅱ)and Ni(Ⅱ) with a single sweep polarography was developed. The experiment condition was studied and the results shou that the optimum base solution is that the residue got from evaporating 25 mL mixed solution, 2.5 mL 1.0 mol/L ethylenediamine, 3.0 mL 1 .0 mol/L ammonia-ammonium chloride,5.0mL, 10 % sodium sulfite and 0.5 mL 0.5 % gelatin were mixed and diluted to 25 mL, with water.Under the condition of this base solution, the polarography wave shapes of the six cations are ideal and without overlap of the peaks. In this base solution, Cu(Ⅱ), Zn(Ⅱ), Fe(Ⅱ), Mn(Ⅱ). Co(Ⅱ) and Ni(Ⅱ)in synthetic samples were determined with relative errors 0.4-9.4 % and relative standard deviations 0.8%- 12.2%. Under this experiment condition, one fold of Pb(Ⅱ), Cr(Ⅵ) and Mo(Ⅵ ) do not interere with the determination for Cu(Ⅱ). This method has been used to the simultaneous determination of the amount of the six cations in the samples of soil and Beiqi Tea. The relative standard deviations were 0.1%-2.1 % and recoveries were 93.5%-99.0 %.

Spectrophotometric Determination of Cu（Ⅱ） in Anolyte of Electrolytic Nickel by EDTPO

N, N, N′,N′-ethylenediaminetetrakis(methylenephosphonic acid), EDTPO, was synthesized and char-acterized by element analysis. The reaction of EDTPO with Cu(Ⅱ) formes a stable blue complex with a molarabsorptivity of 2. 88 × 10￣3 L· mol￣(-1)· cm￣(-1) at 285. 1nm. The composition of the complex is determined tobe 1: 1 . The concentration of Cu (Ⅱ)obeys the Beer′s law from 12. 7μg/ml to 50. 8 μg/ml .Co(Ⅱ), Mn(Ⅱ), Pb(Ⅱ), Cd(Ⅱ), Ca(Ⅱ), Mg (Ⅱ), Cr (Ⅱ) cause a negligible interference except forFe(Ⅱ), Zn(Ⅱ) in the determination of Cu (Ⅱ) with EDTPO. The spectrophotometric determinationof Cu(Ⅱ) is developed. This method is successfully used in determination of Cu(Ⅱ)in anolyte of electrolyticnickel.

ADSORPTIVE VOLTAMMTRIC DETERMINATION OF COPPER,NICKEL,COBALT AND CADMIUM WITH 2-QADN2,7

A new reagent 2-QADN2,7 has been synthesized and its electroana- lytical characteristics have been studied.The procedure of the adsorptive voltammetric determination of copper,nickel,cohalt and cadmium was worked out.

Study of Kinetics of Complexation Reaction of Co^(2+) with 2-benzoylpyridine-4-phenyl-3-thiosemicarbazone and Kineticspectrophotometric Determination of Cobalt

Kinetics of complexation reaction of Co2+ with 2-benzoylpyridine-4-phenyl-3-thiosemicarbazone(BPPT) was spectrophotometrically examined at 421 nm.The ligand that is developed for a simple kinetic-spectrophotometric determination of Co2+ is based on 1:2 complex formation between Co2+ and BPPT.The complexation reaction was carried out in ethanol-water medium at 25 ℃.Kinetic and activation parameters of the complexation reaction were calculated,and the rate equation and the reaction mechanism were proposed.The calibration graph is linear in the concentration range of 0.10～2.91 mg·L-1 for the tangent method.The species that caused interference were investigated.

碳酸钙D_(3)颗粒(Ⅱ)中维生素D_(3)含量测定的不确定度评定

目的建立测定碳酸钙D_(3)颗粒(Ⅱ)中维生素D_(3)含量不确定度的评定方法。方法采用《国家药品标准》WS1-XG-033-2021中维生素D_(3)含量测定方法进行测定,同时依据《测量不确定度评定与表示》JJF 1059.1-2012中的相关规定,建立测定维生素D_(3)的不确定度数学模型,并对不确定度来源进行分析和评定。结果维生素D_(3)含量的不确定度来源主要有对照品纯度(PR),对照品称量(MR),对照品溶液制备(VR),对照品溶液测定(AR),样品称量(MS),供试品溶液制备(VS),样品平均装量(W),样品溶液测定(AS),高效液相色谱仪(I)及方法偏倚(B)。高效液相色谱外标法测定碳酸钙D_(3)颗粒(Ⅱ)中维生素D_(3)含量的合成不确定度为0.0228,扩展不确定度为3.22%(k=2,置信概率为95%)。方法偏倚引入的相对标准不确定度为1.83×10^(-2),为潜在风险点。结论所建立的方法适用于高效液相色谱外标法测定碳酸钙D_(3)颗粒(Ⅱ)中维生素D_(3)含量测定的不确定度评定,但测定方法回收率较低。建议对该方法进行影响因素试验考察,以改进检验方法,提高平均回收率。

Separation and determination of trace amounts of beryllium（Ⅱ）,alumini

Ｓｅｐａｒａｔｉｏｎａｎｄｄｅｔｅｒｍｉｎａｔｉｏｎｏｆｔｒａｃｅａｍｏｕｎｔｓｏｆｂｅｒｙｌｌｉｕｍ（Ⅱ），ａｌｕｍｉｎｉｕｍ（Ⅲ）ａｎｄｉｒｏｎ（Ⅲ）ｗｉｔｈｃｈｒｏｍａｚｏｌＫＳｂｙＲＰ－ＨＰＬＣＬｉｕＳｈａｏｐｕ，ＤｅｎｇＣｈｕａｎｙｕｅ．Ｚ...

Novel cobalt(Ⅱ) complexes of amino acids-Schiff bases catalyzed aerobic oxidation of various alcohols to ketones and aldehyde

Two cobalt（Ⅱ） complexes 1 and 2 of Schiff bases derived from amino acids were synthesized and used for oxidation of benzyl alcohol with molecular oxygen at different conditions of pH,solvent,temperature and complex/alcohol molar ratio to optimize reaction conditions and to evaluate the catalytic efficiency of new cobalt Schiff base complexes.Under obtained optimum conditions,various alcohols were oxidized to corresponding aldehydes and ketones.

Hydrothermal Syntheses and Crystal Structures of Cobalt(Ⅱ) Complexes Constructed by Dipyrido[3,2-a:2',3'-c]phenazine and Different Carboxylate Ligands

Two new metal-organic complexes,{[Co2（bptc）（DPPZ）2（H2O）2]·H2O}n 1 and {[Co2（ccm）2（DPPZ）2]·2H2O}n 2,were obtained by the hydrothermal reactions of Co（NO3）2·6H2O with chelating ligand dipyrido[3,2-a：2＇,3＇-c]phenazine（DPPZ） and the corresponding carboxylic acid,namely,3,3＇,4,4＇-benzophenonetetracarboxylic acid（H4bptc） or 2-carboxycinnamic acid（H2ccm）,respectively.The complexes were structurally characterized by single-crystal X-ray diffraction,elemental analyses,IR spectra,and thermal gravimetry.1 presents unique chiral chain structures,which are further consolidated into three-dimensional supramolecular frameworks via noncovalent bonds,such as hydrogen bonding and π-π interactions.2 features infinite double-chain structures,which are connected by strong π-π interactions to result in three-dimensional supramolecular architectures.

Syntheses,Crystal Structures,and Magnetic Properties of Cobalt(Ⅱ) Complexes with 1,1-Cyclohexanediacetic Acid

Two new Co（Ⅱ） coordination polymers,{[Co_3（Hchda）_2（chda）_2（bpp）_2（H_2O）_2]}_n 1 and {[Co（chda）（bpe）（H_2O）]·3H_2O}_n 2（H_2chda = 1,1-cyclohexanediacetic acid,bpp = 1,3-bis（4-pyridinyl）propane and bpe = 1,2-bis（4-pyridinyl）ethylene）,were hydrothermally synthesized and then characterized by elemental analysis,IR spectroscopy,thermogravimetric analysis（TGA）,and single-crystal X-ray diffraction.Complex 1 possesses an infinite metal-organic layer based on triply bridged linear trinuclear subunits and complex 2 exhibits a square（4,4） grid layer with dangling lateral arms resulting from eight-membered rings above and below the layer.In addition,magnetic properties of complexes 1 and 2 are also given.

Synthesis,Structure,and Magnetic Property of One Novel Entangled Cobalt~Ⅱ-organic Compound

One novel entangled cobalt compound, {[Co3（nbta）2（4,4＇-bpy）2（H2O）2]（H2O）2}n （1, H3nbta = 5-nitro-1,2,3-benzenetricarboxylic acid, 4,4＇-bpy = 4,4＇-bipyridyl）, was prepared and characterized by X-my diffraction, magnetism, elemental analysis, XPS, TGA and IR spectroscopy. The crystal of 1 crystallizes in monoclinic, space group Pc with a = 13.0717（16）, b = 11.4167（14）, c = 15.9342（19） A, β = 90.5190（10）°, V= 2377.9（5） A3, Z= 2, C48H36Co3N8O20, Mr = 1221.64, Dc = 1.706 g/cm3, F（000） = 1242 and μ（MoKa） = 1.128 mm^-1. The final R = 0.0497 and wR = 0.1461 for 4185 observed reflections with I 〉 20（0 and R = 0.0721 and wR = 0.1619 for all data. X-ray diffraction analyses revealed that Co（l） is linked by the nbta3- ligands to form the ladder shape along the c axis, which is further extended into two-dimensional networks via the joint of Co（2） along the a axis. Moreover, these two dimensional motifs are interconnected by the 4,4＇-bpy bridges to form a complicated 3-D polymeric framework. Magnetic measurements revealed that compound 1 shows strong antiferromagnetic property.

Synthesis and Crystal Structure of a Cobalt(Ⅱ) Complex with 2-(4'-Chlorine-benzoyl)-benzoic Acid and 1,10-Phenanthroline

A new metal-organic complex Co2（cbba）4（phen）2（μ2-OH2）（H2cbba=2-（4＇-chlorine-benzoyl）benzoic acid,phen=1,10-phenanthroline） 1 has been hydrothermally synthesized and struc-turally characterized by single-crystal X-ray diffraction,elemental analyses,TG and IR spectroscopy.The compound crystallizes in triclinic,space group P1 with a=10.7659（7）,b=17.1856（11）,c=19.2022（13）,α=83.8120（10）,β=84.9930（10）,γ=87.2070（10）°,V=3515.8（4）3,C80H50Cl4Co2N4O13,Mr=1534.90,Dc=1.450 g/cm3,μ（MoKα）=0.693 mm-1,F（000）=1568,Z=2,the final R=0.0490 and wR=0.1092 for 8216 observed reflections（Ⅰ 〉2σ（Ⅰ））.In the crystal structure,the cobalt atom is six-coordinated with three carboxylate oxygen atoms from three different cbba ligands,one oxygen atom from coordinated water molecule and two nitrogen atoms from phen ligand,showing a distorted octahedral geometry.Furthermore,it exhibits a 3D supramolecular network through π-π and hydrogen bonding interactions.

Hydrothermal Synthesis and Crystal Structure of a New One-dimensional Cobalt(Ⅱ) Complex with 2-Pyridinecarboxyic Acid and 4,4′-Bipyridine Ligands

A new metal-organic coordination polymer [Co（2-pya）2（4,4＇-bipy）]2n-[（4,4＇- bipy）0.5· H2O]2n （2-pya = 2-pyridinecarboxylic acid, 4,4＇-bipy = 4,4＇-bipyridine） 1 has been hydrothermally synthesized and structurally characterized by elemental analysis, IR spectrum, TG and single-crystal X-ray diffraction. The complex crystallizes in tetragonal, space group I41/a with a = b = 22.719（2）, c = 10.710（2）/k, V = 5527.8（14） A3, C54H46N10Co2O10, Mr= 1112.87, Dc = 1.337 g/cm3,μ（MoKa） = 0.665 mm-1, F（000） = 2296, Z = 4, the final R = 0.0633 and wR = 0.1096 for 1261 observed reflections （I 〉 2σ（I））. It exhibits a one-dimensional chain-like structure constructed by mixed ligands of 2-pyridinedicarboxylic acid and 4,4＇-bipyridine.

Synthesis, Crystal Structure, and Fluorescent and Thermal Stability Properties of Two New Cobalt(Ⅱ) Complexes with 2,2’-Bipy as Ligand

Two new cobalt（Ⅱ）complexes[Co2（2,2?-bipy）2（dpa）2（H2O）5]·4H2O（1）and Co（2,2?-bipy）3（SO4）]·7.5H2O（2）have been synthesized with diaphonic acid（H2dpa）and 2,2?-bipyridine（2,2?-bipy）as ligands.In 1,two neighboring cobalt（Ⅱ）ions are linked together by one bridging diaphonic acid group,forming an asymmetric dinuclear structure.1 crystallizes in triclinic,space group ■ with a=9.825（6）,b=13.007（8）,c=19.586（1）?,α=80.773（1）o,β=77.065（1）o,γ=85.902（1）o,Mr=431.4,V=2406.5（3）?3,Dc=1.48 g/cm3,Z=2,μ（MoKα）=0.767 mm-1,F（000）=1112,the final R=0.0379 and wR=0.0862.The central cobalt（Ⅱ）ions in 1 and 2 are coordinated with six atoms,forming distorted octahedral coordination geometry.The fluorescence and thermal stability properties of 1 and 2 are also reported.

Dioxygen affinities and catalytic oxidation performance of cobalt(Ⅱ) hydroxamates with benzo-15-crown-5 pendants

The oxygenation constants （Ko2） of cobalt（Ⅱ） hydroxamates （CoL^1 2-CoL^3 2） with benzo-15-crown-5 （B15C5） pendants were measured over the range of -5 to ＋20 ℃, and the values of thermodynamic parameters （ΔH^0 and ΔS^0） were calculated based on these （Ko2） values, Meanwhile, these crowned complexes were employed to the oxidation for p-xylene to p-toluic acid with air at 110Δ under normal atmospheric pressure. The effects of B15C5 pendant and the length of chain bonded to B15C5 in these complexes on the O2-binding capabilities and oxidation for p-xylene were investigated with the comparison of crown-free analogues CoL^4 2.

Fixed-bed column study for deep removal of copper(Ⅱ) from simulated cobalt electrolyte using polystyrene-supported 2-aminomethylpyridine chelating resin

This study presents the deep removal of copper (Ⅱ) from the simulated cobalt electrolyte using fabricated polystyrene-supported 2-aminomethylpyridine chelating resin (PS-AMP) in a fixed-bed.The effects of bed height (7.0–14.0 cm),feed flow rate (4.5–9.0 mL/min),initial copper (Ⅱ) concentration of the feed (250–1000 mg/L),feed temperature (25–40 ℃) and the value of pH (2.0–4.0) on the adsorption process of the PS-AMP resin were investigated.The experimental data showed that the PS-AMP resin can deeply eliminate copper (Ⅱ) from the simulated cobalt electrolyte.The bed height,feed flow rate,initial copper (Ⅱ) concentration of the feed,feed temperature and feed pH value which corresponded to the highest removal of copper (Ⅱ) were 7.0 cm with 35 mm of the column diameter,4.5 mL/min,40℃,1000 mg/L and 4.0,respectively.The breakthrough capacity,the saturated capacity of the column and the mass ratio of Cu/Co (g/g) in the saturated resin were correspondingly 16.51 mg/g dry resin,61.72 mg/g dry resin and 37.67 under the optimal experimental conditions.The copper (Ⅱ) breakthrough curves were fitted by the empirical models of Thomas,Yoon-Nelson and Adam-Bohart,respectively.The Thomas model was found to be the most suitable one for predicting how the concentration of copper (Ⅱ) in the effluent changes with the adsorption time.