MESHING THEORY AND DESIGN METHOD OF NEW SILENT CHAIN AND SPROCKET

Based on the study of the meshing theory of a new silent chain and sprockets, and the rolling cutting theory of sprocket and hob, the harmonious relations of dominating dimensions among the new silent chain, sprocket and hob is build, the meshing conditions are expatiated, and the resolved expression, which can instruct design and calculation, is educed. The tests show that the meshing design method is feasible.

PROPER CONDITIONS OF MESHING FOR Hy-Vo SILENT CHAIN AND SPROCKET

Proper meshing of Hy-Vo silent chain and sprocket is important for realizing the transmission of the silent chain with more efficiency and less noise. Based on the study of the meshing theory of the Hy-Vo silent chain with the sprocket and the roll cutting machining principle of the sprocket with the hob, the proper conditions of the meshing for the Hy-Vo silent chain and the sprocket are put forward with the variable pitch characteristic of the Hy-Vo silent chain taken into consideration, and the proper meshing design method on the condition that the value of the link tooth pressure angle is unequal to the value of the sprocket tooth pressure angle is studied. Experiments show that this new design method is feasible. In addition, the design of the pitch, the sprocket tooth pressure angle and the fillet radius of the sprocket addendum circle are studied. It is crucial for guiding the design of the hob which cuts the Hy-Vo silent chain sprocket.

Method for generating non-circular gear with addendum modification and its application in transplanting mechanism

With a focus on the design of tooth profiles of non-circular gears with addendum modifications that conform to the given complex transmission ratio curves and based on a series of discrete point sets on the pitch curves,the criteria for tooth profile distortion and undercut in non-circular gears were proposed.With the constraint of no tooth profile distortion and undercut,the addendum modification coefficient was introduced into the calculation of the distorted and undercut segments of the tooth profile of a non-circular gear,and the addendum modification coefficient of each contact point of the non-circular gear was obtained.Based on the generating principle for gear shaping with gear cutters,a theoretical model for calculating the tooth profile of non-circular gears with addendum modification was derived.The cutting and radial feeding motions of the pinion cutter were ignored,and only the meshing motion was considered.The involute tooth profiles of the pinion cutter enveloped the tooth profile of the non-circular gear.3D automatic non-circular gear model generation software was developed,which was a secondary development product of the software UG.A non-circular gear in a rice potted seedling transplanting mechanism was designed,and the transplanter was developed and tested.The test results showed that the designed tooth profile of non-circular gear achieved the variable transmission ratios required by the transplanting mechanism.When the transplanting efficiencies were 140 plants/min,160 plants/min and 180 plants/min,the transplanter completed the rice potted seedling transplanting operation with high quality.