Aiming to deal with the difficult issues of terrain data model simplification and crack disposal,the paper proposed an improved level of detail(LOD)terrain rendering algorithm,in which a variation coefficient of eleva...Aiming to deal with the difficult issues of terrain data model simplification and crack disposal,the paper proposed an improved level of detail(LOD)terrain rendering algorithm,in which a variation coefficient of elevation is introduced to express the undulation of topography.Then the coefficient is used to construct a node evaluation function in the terrain data model simplification step.Furthermore,an edge reduction strategy is combined with the improved restrictive quadtree segmentation to handle the crack problem.The experiment results demonstrated that the proposed method can reduce the amount of rendering triangles and enhance the rendering speed on the premise of ensuring the rendering effect compared with a traditional LOD algorithm.展开更多
In remote sensing sea surface temperature (SST), the traditional fusion method is used to compute the dot product of a subjective weight vector with a satellite measurement vector, while the result requires validati...In remote sensing sea surface temperature (SST), the traditional fusion method is used to compute the dot product of a subjective weight vector with a satellite measurement vector, while the result requires validation by field measurement. However, field measurement that relative to the satellite measurement is very sparse, many information may not be verified. A relative objective weight vector is constructed by using the limited field measurement, which is based on coefficient of variation method. And then it make an application of the data fusion by the weighted average method in the SST data. fuse SST data with the weighted average method. In this way, some posteriori information can be added to the fusion process. The model reduces the dependence on verification, and some of the satellite measurement can be handled without corresponding to the field measurement, and the fusion result matches transfer errors theory.展开更多
[Objective] The aim was to study the driving forces of rocky desertification in Guizhou Province. [Method] Based on GIS and RS technology, the main driving forces of rocky desertification in Guizhou Province were anal...[Objective] The aim was to study the driving forces of rocky desertification in Guizhou Province. [Method] Based on GIS and RS technology, the main driving forces of rocky desertification in Guizhou Province were analyzed by means of correlation analysis and variation coefficient method, and then the distribution of rocky desertification in Guizhou Province was assessed synthetically. [Result] The main driving forces of rocky desertification in Guizhou Province were vegetation cover, rainfall, peasant income and gradient which were obviously correlative with rocky desertification; from theoretical distribution, rocky desertification was the most serious in Bijie, southwest Guizhou, southern Guizhou and northeastern Guizhou, and the theoretical distribution of rocky desertification in Bijie was severer than its current situation, which showed that construction of ecological function area in Bijie restrained the development of rocky desertification effectively; the good consistency between theoretical and current distribution of rocky desertification revealed that the study method was feasible. [Conclusion] The study could provide theoretical references for the practical control of rocky desertification.展开更多
Before the major earthquake or rock damage occurs,it is often accompanied by a sudden change in the degree of non-uniformity of the strain field.In order to find a stronger non-uniformity signal before the rock failur...Before the major earthquake or rock damage occurs,it is often accompanied by a sudden change in the degree of non-uniformity of the strain field.In order to find a stronger non-uniformity signal before the rock failure,the coefficient of variation(Cv)is examined and reformed in this study.We test the Cv calculation way of the"normal-abnormal"model proposed in the previous studies.Based on the analysis of the physical process of rock failure and its relationship to the shear strain field,we construct a new way to calculate the Cv value.The variation of shear strain field on rock sample with the increase of stress is obtained by the digital speckle correlation method(DSCM).The new Cv value calculation way is used to study the non-uniformity of the spatial distribution for the shear strain field.The results show that this Cv calculation way can get more obvious abnormal signals.When the number of observation points are limited,the specific distribution of points can increase the signal strength,which may provide reference for the research on precursor detection of earthquakes.展开更多
The exact classical limits for the coefficient of variation c for the normal distribution are derived. The hand-calculating approximated classical limits for c having high accuracy are given to meet practical engineer...The exact classical limits for the coefficient of variation c for the normal distribution are derived. The hand-calculating approximated classical limits for c having high accuracy are given to meet practical engineering needs. Using Odeh and Owen's computational method and Brent's algorithm, the tables for the r-upper exact classical limits of coefficient of variation for normal distribution are calculated for the different confidence coefficient y, the sample size n=1(1)30,40,60,120, the sample coefficient of variation c=0.01(0.01)0.20. It is shown that if n<8,c<0.20, then the V -upper exact classical limits cu for c are slightly higher than the exact fiducial limits cu,F for c if. n>8, c<0.02,then cu-cu,f<5x10-6展开更多
A lowtemperature coefficient( TC) bandgap reference( BGR) with novel process variation calibration technique is proposed in this paper. This proposed calibration technique compensating both TC and output value of ...A lowtemperature coefficient( TC) bandgap reference( BGR) with novel process variation calibration technique is proposed in this paper. This proposed calibration technique compensating both TC and output value of BGR achieves fine adjustment step towards the reference voltage,while keeping optimal TC by utilizing large resistance to help layout match. The high-order curvature compensation realized by poly and p-diffusion resistors is introduced into the design to guarantee the temperature characteristic. Implemented in 180 nm technology,the proposed BGR has been simulated to have a power supply rejection ratio( PSRR) of 91 dB@100 Hz. The calibration technique covers output voltage scope of 0. 49 V-0. 56 Vwith TC of 9. 45 × 10^(-6)/℃-9. 56 × 10^(-6)/℃ over the temperature range of-40 ℃-120 ℃. The designed BGR provides a reference voltage of 500 mV,with measured TC of 10. 1 × 10^(-6)/℃.展开更多
Plant-to-plant variability is a crop stability component.The objective of this study in maize(Zea mays L.)was to test the validity of the theoretical background of the hypothesis that the coefficient of variation(CV)f...Plant-to-plant variability is a crop stability component.The objective of this study in maize(Zea mays L.)was to test the validity of the theoretical background of the hypothesis that the coefficient of variation(CV)for grain yield per plant and mean yield are connected exponentially,following the Taylor’s Power Law(TPL)Model.Field experimentation was conducted across two sites,two seasons,and two planting densities.Densities were the main plots,corresponding to the typical practice of 8.89 plants m–2(TCD)and the low-input optimal of 5.33 plants m–2(LCD),while hybrids were the subplots.Data from 26 subplots in the first site averaged CV values of 22.6%at the TCD and 21.9%at the LCD,and mean yields of 19.1 and 13.9 t ha–1,respectively,following the TPL Model.The same was true for the second site,with average CVs and means of 41.5%and 14.3 t ha–1 at the TCD and 36.8%and 11.5 t ha–1 at the LCD.A test was performed on the simple correlation between the logarithms of variances and their respective means to investigate whether there is a systematic variance dependence on mean,thus questioning the reliability of TPL.The validity of TPL was verified in the first site.Nevertheless,there was a systematic dependence of yield variance on mean yield in the second site,implying that the CV-yield correlation might be not biologically meaningful.Conversion of the variance to remove its dependence on the mean did not validate the CV-yield negative relationship,meaning that caution is needed when interpreting the CV as a stability index for intra-crop variation.Whether the determinant factor of invalidity of TPL was the extensive intra-crop variation in the lower yielding second site can be assessed in future research.展开更多
Slope stability prediction research is a complex non-linear system problem.In carrying out slope stability prediction work,it often encounters low accuracy of prediction models and blind data preprocessing.Based on 77...Slope stability prediction research is a complex non-linear system problem.In carrying out slope stability prediction work,it often encounters low accuracy of prediction models and blind data preprocessing.Based on 77 field cases,5 quantitative indicators are selected to improve the accuracy of prediction models for slope stability.These indicators include slope angle,slope height,internal friction angle,cohesion and unit weight of rock and soil.Potential data aggregation in the prediction of slope stability is analyzed and visualized based on Six-dimension reduction methods,namely principal components analysis(PCA),Kernel PCA,factor analysis(FA),independent component analysis(ICA),non-negative matrix factorization(NMF)and t-SNE(stochastic neighbor embedding).Combined with classic machine learning methods,7 prediction models for slope stability are established and their reliabilities are examined by random cross validation.Besides,the significance of each indicator in the prediction of slope stability is discussed using the coefficient of variation method.The research results show that dimension reduction is unnecessary for the data processing of prediction models established in this paper of slope stability.Random forest(RF),support vector machine(SVM)and k-nearest neighbour(KNN)achieve the best prediction accuracy,which is higher than 90%.The decision tree(DT)has better accuracy which is 86%.The most important factor influencing slope stability is slope height,while unit weight of rock and soil is the least significant.RF and SVM models have the best accuracy and superiority in slope stability prediction.The results provide a new approach toward slope stability prediction in geotechnical engineering.展开更多
The effective recovery of water level is a crucial measure of the success of comprehensive groundwater over-exploitation management actions in North China.However,traditional evaluation method do not directly capture ...The effective recovery of water level is a crucial measure of the success of comprehensive groundwater over-exploitation management actions in North China.However,traditional evaluation method do not directly capture the relationship between mining and other equilibrium elements.This study presents an innovative evaluation method to assess the water level recovery resulting from mining reduction based on the relationship between variation in exploitation and recharge.Firstly,the recharge variability of source and sink terms for both the base year and evaluation year is calculated and the coefficient of recharge variationβis introduced,which is then used to calculate the effective mining reduction and solve the water level recovery value caused by the effective mining reduction,and finally the water level recovery contribution by mining reduction is calculated by combining with the actual volume of mining reduction in the evaluation area.This research focuses on Baoding and Shijiazhuang Plain area,which share similar hydrogeological conditions but vary in groundwater exploitation and utilization.As the effect of groundwater level recovery with mining reduction was evaluated in these two areas as case study.In 2018,the results showed an effective water level recovery of 0.17 m and 0.13 m in the shallow groundwater of Shijiazhuang and Baoding Plain areas,respectively.The contributions of recovery from mining reduction were 76%and 57.98%for these two areas,respectively.It was notable that the water level recovery was most prominent in the foothill plain regions.From the evaluation results,it is evident that water level recovery depends not only on the intensity of groundwater mining reduction,but also on its effectiveness.The value of water level recovery alone cannot accurately indicate the intensity of mining reduction,as recharge variation significantly influences water level changes.Therefore,in practice,it is crucial to comprehensively assess the impact of mining reduction on water level recovery by combining the coefficient of recharge variation with the contribution of water level recovery from mining reduction.This integrated approach provide a more reasonable and scientifically supported basis,offering essential data support for groundwater management and conservation.To improve the accuracy and reliability of evaluation results,future work will focus on the standardizing and normalizing raw data processing.展开更多
The plant-pollinator‘arms race’model posits that a major driver of the evolution of elongated corollas in flowers is reciprocal selection for‘morphological fit’between pollinator-tongue length and access distance ...The plant-pollinator‘arms race’model posits that a major driver of the evolution of elongated corollas in flowers is reciprocal selection for‘morphological fit’between pollinator-tongue length and access distance to nectar(usually corolla-tube length).Evidence for the pollinator-mediated selection on tube length and evolution of multiple,correlated floral traits remains inconclusive.To gain possible insights into the strength of stabilizing selection by assessing standing phenotypic variation,we measured a series of functionally important floral traits,including corolla tube length and‘effective’tube depth and degree of style coiling.We then calculated coefficients of variation(CV)for these traits in three field populations of R.schneideriana.Unlike in most long-tubed flowers,the bottom part of the corolla tube is completely occupied by the style,with no room for nectar.The length of this portion of the corolla tube was more variable(higher CV)than the upper part of the corolla tube,suggesting that functional tube depth was under stronger stabilizing selection.The degree of style coiling was negatively related to the corolla-tube length in all three populations of R.schneideriana,suggesting that there may be conflicting selection acting on style length and corolla-tube length,which are otherwise usually tightly correlated.Given the lack of nectar in the flowers of this species,the long corolla tubes and long styles may represent morphological holdovers from ancestors that were pollinated by long-tongued pollinators,as is still seen in related species in the western Himalayas.展开更多
This study takes a fractured rock mass in the Datengxia Hydropower Station,China as an example to analyze the size effects and determine the representative elementary sizes.A novel method considering geometric paramet...This study takes a fractured rock mass in the Datengxia Hydropower Station,China as an example to analyze the size effects and determine the representative elementary sizes.A novel method considering geometric parameter distributions is proposed in this work.The proposed method can quickly and simply determine the size effects and representative elementary sizes.Specifically,geometric parameter distributions,including fracture frequency,size and orientation,are generated on the basis of the Bernoulli trial and Monte Carlo simulation.The distributions are assessed using the coefficient of variation(CV),and the acceptable variations for CV(5%,10%and 20%)are used to determine representative elementary sizes.Generally,the representative element of rock masses is the representative elementary volume(REV).The present study extends the representative element to other dimensions,i.e.representative elementary length(REL)and representative elementary area(REA)for one and two dimensions,respectively.REL and REA are useful in studying the size effects of one-(1D)and twodimensional(2D)characteristics of rock masses.The relationships among multi-dimensional representative elementary sizes are established.The representative elementary sizes reduce with the increase in the dimensions,and REA and REV can be deduced by REL.Therefore,the proposed method can quickly and simply determine REL and further estimate REA and REV,which considerably improves the efficiency of rock mass analysis.展开更多
Visible light communication(VLC),which is a prominent emerging solution that complements the radio frequency(RF)technology,exhibits the potential to meet the demands of fifth-generation(5G)and beyond technologies.The ...Visible light communication(VLC),which is a prominent emerging solution that complements the radio frequency(RF)technology,exhibits the potential to meet the demands of fifth-generation(5G)and beyond technologies.The random movement of mobile terminals in the indoor environment is a challenge in the VLC system.The model of optical attocells has a critical role in the uniform distribution and the quality of communication links in terms of received power and signal-to-noise ratio(SNR).As such,the optical attocells positions were optimized in this study with a developed try and error(TE)algorithm.The optimized optical attocells were examined and compared with previous models.This novel approach had successfully increased minimum received power from−1.29 to−0.225 dBm,along with enhanced SNR performance by 2.06 dB.The bit error rate(BER)was reduced to 4.42×10−8 and 6.63×10−14 by utilizing OOK-NRZ and BPSK modulation techniques,respectively.The optimized attocells positions displayed better uniform distribution,as both received power and SNR performances improved by 0.45 and 0.026,respectively.As the results of the proposed model are optimal,it is suitable for standard office and room model applications.展开更多
The size distribution of airborne dust particles is an important parameter in the measurement of dust emissions due to wind erosion,and a quantitative and accurate description is necessary.Observations regarding the s...The size distribution of airborne dust particles is an important parameter in the measurement of dust emissions due to wind erosion,and a quantitative and accurate description is necessary.Observations regarding the size distribution of airborne dust particles are currently lacking in Tibetan Plateau(TP).This study aims to obtain a dust particle size distribution and compare the difference in spatial distribution at a field site(FS)and two urban observation sites(Minfeng and Hetian),in the north of the TP,under the condition of the dust-days and clear-days.The observation data was collected from 5 July to 4 August,2019.The mass concentration of dust(PM20)was measured with a 10-stage quartz crystal microbalance cascade impactor.The results suggested that 91.9%of the particles were less than 1.4μm on clear-days,and particles of d≥1.4μm increased to 27.2%with the occurrence of the dust events.More than 80%of the airborne dust particles were less than 1.4μm for each friction velocity.The proportion of d<0.7μm was the greatest at 3.0 m(above the surface,similarly hereinafter)on dust-days,while the proportion of d>0.7μm was the greatest at 0.5 m on clear-days.During urban observation,with the occurrence of dust events,the concentration of a particle size greater than 2.5μm increased most significantly in Minfeng,while the concentration of a particle size less than 0.7μm increased most significantly in Hetian.Moreover,the proportion of particles with d<0.7μm had the smallest difference,while the proportion of particles with d>1.4μm had the most obvious difference among these three sites.展开更多
The flow and mixing behavior of two miscible liquids has been studied in an innovative static mixer by using CFD,with Reynolds numbers ranging from 20 to 160.The performance of the new mixer is compared with those of ...The flow and mixing behavior of two miscible liquids has been studied in an innovative static mixer by using CFD,with Reynolds numbers ranging from 20 to 160.The performance of the new mixer is compared with those of Kenics,SMX,and Komax static mixers.The pressure drop ratio(Z-factor),coefficient of variation(CoV),and extensional efficiency(α)features have been used to evaluate power consumption,distributive mixing,and dispersive mixing performances,respectively,in all mixers.The model is firstly validated based on experimental data measured for the pressure drop ratio and the coefficient of variation.CFD results are consistent with measured data and those obtained by available correlations in the literature.The new mixer shows a superior mixing performance compared to the other mixers.展开更多
Using S-rough sets, this paper gives the concepts off-heredity knowledge and its heredity coefficient, and f-variation coefficient of knowledge; presents the theorem of f-attribute dependence of variation coefficient ...Using S-rough sets, this paper gives the concepts off-heredity knowledge and its heredity coefficient, and f-variation coefficient of knowledge; presents the theorem of f-attribute dependence of variation coefficient and the relation theorem of heredity-variation. The attribute dependence of f-variation coefficient and the relation of heredity-variation are important characteristics of S-rough sets. From such discussion, this paper puts forward the heredity mining off-knowledge and the algorithm of heredity mining, also gives its relative application.展开更多
Vertical and temporal distributions of N and P in soil solution in aquatic-terrestrial ecotone (ATE) of Taihu Lake were investigated, and the relations among N, P, ORP (oxidation reduction potential), TOC, root sy...Vertical and temporal distributions of N and P in soil solution in aquatic-terrestrial ecotone (ATE) of Taihu Lake were investigated, and the relations among N, P, ORP (oxidation reduction potential), TOC, root system biomass and microorganism were studied. As a whole, significant declines in TN, NO3^--N, DON (dissolved organic nitrogen) and TP concentration in soil solution have occurred with increase of the depth, and reached their minima at 60 cm depth, except for NH4^+-N, which increased with depth. The concentration of TP increased gradually from spring to winter in the topsoil, the maximum 0.08 mg/L presented in the winter while the minimum 0.03 mg/L in spring. In the deeper layer, the concentration value of TP fluctuated little. As for the NO3^--N, its seasonal variation was significant at 20 cm depth, its concentration increased gradually from spring to autumn, and decreased markedly in winter. Vertical and temporal distribution of DON is contrary to that of NO3^--N. The results also show that the variation of N and P in the percolate between adjacent layers is obviously different. The vertical variation ofTN, TP, NO3^--N, NH4^+-N and DON is significant, of which the variation coefficient of NO3^--N along the depth reaches 100.23%, the highest; while the variation coefficient of DON is 41.14%, the smallest. The results of correlation analysis show that the concentration of nitrogen and phosphorus correlate significantly with TOC, ORP, root biomass and counts of nitrifying bacteria. Most nutrients altered much from 20 to 40 cm along the depth. However, DON changed more between 60 and 80 cm. Results show that soil of 0-60 cm depth is active rhizoplane, with strong capability to remove the nitrogen and phosphorus in ATE. It may suggest that there exists the optimum ecological efficiency in the depth of above 60 cm in reed wetland. This will be very significant for ecological restoration and reestablishment.展开更多
High temperature compressive strength is one of the most important performances of resin sand; its value directly concerns the quality of castings. In order to seek the best testing method of resin sand high temperatu...High temperature compressive strength is one of the most important performances of resin sand; its value directly concerns the quality of castings. In order to seek the best testing method of resin sand high temperature compressive strength, a self-developed instrument was used to carry out experiments, and the sample shape and size were designed and studied. The results show that a hollow cylinder sample can reflect the strength difference of different resin sands better than a solid cylinder sample, and its data is stable. The experiments selected Φ20/5×30 mm as the size of the hollow cylinder samples. The high temperature compressive strengths of phenol-formaldehyde resin coated sand, furan resin self-setting sand, and TEA resin sand were each tested. For the resin sand used for cast steel and cast iron, 1,000 oC was selected as the test temperature; for the resin sand used for cast non-ferrous al oy, 800 oC was selected as the test temperature; and for all the resin sand samples, 1 min was selected as the holding time. This testing method can truthfully reflect the high temperature performance of three kinds of resin sand; it is reproducible, and the variation coefficients of test values are under 10%.展开更多
Post-construction settlement has gained increasing attention because it frequently causes engineering problems. A combined model is a commonly used prediction model that overcomes the difficulty of a single model( i. ...Post-construction settlement has gained increasing attention because it frequently causes engineering problems. A combined model is a commonly used prediction model that overcomes the difficulty of a single model( i. e., cannot reflect various regulations of settlement at some stages or the entire process). In this study,the correlation coefficient,maximum error values,and other values were obtained according to the fitting and predicted results of a single model. The coefficient of variation was then introduced to determine the weight of each model forming the combination. The proposed model was used to fit and predict for settlement and overcome the issue of utilizing a single model while determining the weight. The fitting predictive effect was also analyzed using the settlement fitting precision results. The fitting precision of optimizing the combination model is high. The predicted data of the post-construction settlement are closer to the calculated value of the settlement monitoring data. Moreover,the proposed model has good practicability,does not require the interval data of settlement,and restricts the model number. Thus,this model can be applied in the engineering field.展开更多
In this paper,the variation of annual rainfall in Xinjiang by variation coefficient (C_v) widely used in statistics and hydrology is studied.Based on analysing of 25 years' observational data in 98 stations,the au...In this paper,the variation of annual rainfall in Xinjiang by variation coefficient (C_v) widely used in statistics and hydrology is studied.Based on analysing of 25 years' observational data in 98 stations,the authors found that the varia- tion coefficient of annual rainfall has better relation with annual rainfall and sea level elevation,which can be expressed by a bivariate function.This discovery is no doubt valuable to the study of climatic theory and water resources in the area where data are rare.展开更多
To improve the welding efficiency of conventional arc welding, triple-electrode fillet welding was proposed and developed. Stability of triple-electrode fillet welding process is the assurance for ideal joint. The eva...To improve the welding efficiency of conventional arc welding, triple-electrode fillet welding was proposed and developed. Stability of triple-electrode fillet welding process is the assurance for ideal joint. The evaluation model for arc fluctuations of triple-electrode fillet welding was established based on the characteristic parameters and their variation coefficients. This model indicated that variation coefficients could reflect arc voltage flnctuations of welding process, and its analysis result was consistent with the actual welding process.展开更多
基金Supported by the National Natural Science Foundation of China(61363075)the National High Technology Research and Development Program of China(863 Program)(2012AA12A308)the Yue Qi Young Scholars Program of China University of Mining&Technology,Beijing(800015Z1117)
文摘Aiming to deal with the difficult issues of terrain data model simplification and crack disposal,the paper proposed an improved level of detail(LOD)terrain rendering algorithm,in which a variation coefficient of elevation is introduced to express the undulation of topography.Then the coefficient is used to construct a node evaluation function in the terrain data model simplification step.Furthermore,an edge reduction strategy is combined with the improved restrictive quadtree segmentation to handle the crack problem.The experiment results demonstrated that the proposed method can reduce the amount of rendering triangles and enhance the rendering speed on the premise of ensuring the rendering effect compared with a traditional LOD algorithm.
基金Project supported by the National Natural Science Foundation of China(Grant No.40976108)the Shanghai Leading Academic Discipline Project(Grant No.J50103)
文摘In remote sensing sea surface temperature (SST), the traditional fusion method is used to compute the dot product of a subjective weight vector with a satellite measurement vector, while the result requires validation by field measurement. However, field measurement that relative to the satellite measurement is very sparse, many information may not be verified. A relative objective weight vector is constructed by using the limited field measurement, which is based on coefficient of variation method. And then it make an application of the data fusion by the weighted average method in the SST data. fuse SST data with the weighted average method. In this way, some posteriori information can be added to the fusion process. The model reduces the dependence on verification, and some of the satellite measurement can be handled without corresponding to the field measurement, and the fusion result matches transfer errors theory.
基金Supported by Study on the Remote Sensing Quantitative Extraction Technology of Karst Rocky Desertification Information (GY[2007]3017)State Key Development Program of Basic Research of China(973 Program) (2006CB403200)
文摘[Objective] The aim was to study the driving forces of rocky desertification in Guizhou Province. [Method] Based on GIS and RS technology, the main driving forces of rocky desertification in Guizhou Province were analyzed by means of correlation analysis and variation coefficient method, and then the distribution of rocky desertification in Guizhou Province was assessed synthetically. [Result] The main driving forces of rocky desertification in Guizhou Province were vegetation cover, rainfall, peasant income and gradient which were obviously correlative with rocky desertification; from theoretical distribution, rocky desertification was the most serious in Bijie, southwest Guizhou, southern Guizhou and northeastern Guizhou, and the theoretical distribution of rocky desertification in Bijie was severer than its current situation, which showed that construction of ecological function area in Bijie restrained the development of rocky desertification effectively; the good consistency between theoretical and current distribution of rocky desertification revealed that the study method was feasible. [Conclusion] The study could provide theoretical references for the practical control of rocky desertification.
基金jointly supported by the China Postdoctoral Science Foundation(No.2018M630028)the National Natural Science Foundation of China(Nos.41274094,40821062 and 40872133).
文摘Before the major earthquake or rock damage occurs,it is often accompanied by a sudden change in the degree of non-uniformity of the strain field.In order to find a stronger non-uniformity signal before the rock failure,the coefficient of variation(Cv)is examined and reformed in this study.We test the Cv calculation way of the"normal-abnormal"model proposed in the previous studies.Based on the analysis of the physical process of rock failure and its relationship to the shear strain field,we construct a new way to calculate the Cv value.The variation of shear strain field on rock sample with the increase of stress is obtained by the digital speckle correlation method(DSCM).The new Cv value calculation way is used to study the non-uniformity of the spatial distribution for the shear strain field.The results show that this Cv calculation way can get more obvious abnormal signals.When the number of observation points are limited,the specific distribution of points can increase the signal strength,which may provide reference for the research on precursor detection of earthquakes.
文摘The exact classical limits for the coefficient of variation c for the normal distribution are derived. The hand-calculating approximated classical limits for c having high accuracy are given to meet practical engineering needs. Using Odeh and Owen's computational method and Brent's algorithm, the tables for the r-upper exact classical limits of coefficient of variation for normal distribution are calculated for the different confidence coefficient y, the sample size n=1(1)30,40,60,120, the sample coefficient of variation c=0.01(0.01)0.20. It is shown that if n<8,c<0.20, then the V -upper exact classical limits cu for c are slightly higher than the exact fiducial limits cu,F for c if. n>8, c<0.02,then cu-cu,f<5x10-6
基金Supported by the National Natural Science Foundation of China(61604109)the National High-Tech R&D Program of China(2015AA042605)
文摘A lowtemperature coefficient( TC) bandgap reference( BGR) with novel process variation calibration technique is proposed in this paper. This proposed calibration technique compensating both TC and output value of BGR achieves fine adjustment step towards the reference voltage,while keeping optimal TC by utilizing large resistance to help layout match. The high-order curvature compensation realized by poly and p-diffusion resistors is introduced into the design to guarantee the temperature characteristic. Implemented in 180 nm technology,the proposed BGR has been simulated to have a power supply rejection ratio( PSRR) of 91 dB@100 Hz. The calibration technique covers output voltage scope of 0. 49 V-0. 56 Vwith TC of 9. 45 × 10^(-6)/℃-9. 56 × 10^(-6)/℃ over the temperature range of-40 ℃-120 ℃. The designed BGR provides a reference voltage of 500 mV,with measured TC of 10. 1 × 10^(-6)/℃.
基金the European Union and Greek National Funds through the Operational Program Competitiveness,Entrepreneurship and Innovation,under the Call Research-Create-Innovate(Project Code:T1EDK-00739).
文摘Plant-to-plant variability is a crop stability component.The objective of this study in maize(Zea mays L.)was to test the validity of the theoretical background of the hypothesis that the coefficient of variation(CV)for grain yield per plant and mean yield are connected exponentially,following the Taylor’s Power Law(TPL)Model.Field experimentation was conducted across two sites,two seasons,and two planting densities.Densities were the main plots,corresponding to the typical practice of 8.89 plants m–2(TCD)and the low-input optimal of 5.33 plants m–2(LCD),while hybrids were the subplots.Data from 26 subplots in the first site averaged CV values of 22.6%at the TCD and 21.9%at the LCD,and mean yields of 19.1 and 13.9 t ha–1,respectively,following the TPL Model.The same was true for the second site,with average CVs and means of 41.5%and 14.3 t ha–1 at the TCD and 36.8%and 11.5 t ha–1 at the LCD.A test was performed on the simple correlation between the logarithms of variances and their respective means to investigate whether there is a systematic variance dependence on mean,thus questioning the reliability of TPL.The validity of TPL was verified in the first site.Nevertheless,there was a systematic dependence of yield variance on mean yield in the second site,implying that the CV-yield correlation might be not biologically meaningful.Conversion of the variance to remove its dependence on the mean did not validate the CV-yield negative relationship,meaning that caution is needed when interpreting the CV as a stability index for intra-crop variation.Whether the determinant factor of invalidity of TPL was the extensive intra-crop variation in the lower yielding second site can be assessed in future research.
基金by the National Natural Science Foundation of China(No.52174114)the State Key Laboratory of Hydroscience and Engineering of Tsinghua University(No.61010101218).
文摘Slope stability prediction research is a complex non-linear system problem.In carrying out slope stability prediction work,it often encounters low accuracy of prediction models and blind data preprocessing.Based on 77 field cases,5 quantitative indicators are selected to improve the accuracy of prediction models for slope stability.These indicators include slope angle,slope height,internal friction angle,cohesion and unit weight of rock and soil.Potential data aggregation in the prediction of slope stability is analyzed and visualized based on Six-dimension reduction methods,namely principal components analysis(PCA),Kernel PCA,factor analysis(FA),independent component analysis(ICA),non-negative matrix factorization(NMF)and t-SNE(stochastic neighbor embedding).Combined with classic machine learning methods,7 prediction models for slope stability are established and their reliabilities are examined by random cross validation.Besides,the significance of each indicator in the prediction of slope stability is discussed using the coefficient of variation method.The research results show that dimension reduction is unnecessary for the data processing of prediction models established in this paper of slope stability.Random forest(RF),support vector machine(SVM)and k-nearest neighbour(KNN)achieve the best prediction accuracy,which is higher than 90%.The decision tree(DT)has better accuracy which is 86%.The most important factor influencing slope stability is slope height,while unit weight of rock and soil is the least significant.RF and SVM models have the best accuracy and superiority in slope stability prediction.The results provide a new approach toward slope stability prediction in geotechnical engineering.
基金supported by National Natural Science Foundation of China(41972262)Hebei Natural Science Foundation for Excellent Young Scholars(D2020504032).
文摘The effective recovery of water level is a crucial measure of the success of comprehensive groundwater over-exploitation management actions in North China.However,traditional evaluation method do not directly capture the relationship between mining and other equilibrium elements.This study presents an innovative evaluation method to assess the water level recovery resulting from mining reduction based on the relationship between variation in exploitation and recharge.Firstly,the recharge variability of source and sink terms for both the base year and evaluation year is calculated and the coefficient of recharge variationβis introduced,which is then used to calculate the effective mining reduction and solve the water level recovery value caused by the effective mining reduction,and finally the water level recovery contribution by mining reduction is calculated by combining with the actual volume of mining reduction in the evaluation area.This research focuses on Baoding and Shijiazhuang Plain area,which share similar hydrogeological conditions but vary in groundwater exploitation and utilization.As the effect of groundwater level recovery with mining reduction was evaluated in these two areas as case study.In 2018,the results showed an effective water level recovery of 0.17 m and 0.13 m in the shallow groundwater of Shijiazhuang and Baoding Plain areas,respectively.The contributions of recovery from mining reduction were 76%and 57.98%for these two areas,respectively.It was notable that the water level recovery was most prominent in the foothill plain regions.From the evaluation results,it is evident that water level recovery depends not only on the intensity of groundwater mining reduction,but also on its effectiveness.The value of water level recovery alone cannot accurately indicate the intensity of mining reduction,as recharge variation significantly influences water level changes.Therefore,in practice,it is crucial to comprehensively assess the impact of mining reduction on water level recovery by combining the coefficient of recharge variation with the contribution of water level recovery from mining reduction.This integrated approach provide a more reasonable and scientifically supported basis,offering essential data support for groundwater management and conservation.To improve the accuracy and reliability of evaluation results,future work will focus on the standardizing and normalizing raw data processing.
基金This work was supported by the National Natural Science Foundation of China(grant nos.31270281,32030071)to SQHNNSFC(32071671)to ZYT.
文摘The plant-pollinator‘arms race’model posits that a major driver of the evolution of elongated corollas in flowers is reciprocal selection for‘morphological fit’between pollinator-tongue length and access distance to nectar(usually corolla-tube length).Evidence for the pollinator-mediated selection on tube length and evolution of multiple,correlated floral traits remains inconclusive.To gain possible insights into the strength of stabilizing selection by assessing standing phenotypic variation,we measured a series of functionally important floral traits,including corolla tube length and‘effective’tube depth and degree of style coiling.We then calculated coefficients of variation(CV)for these traits in three field populations of R.schneideriana.Unlike in most long-tubed flowers,the bottom part of the corolla tube is completely occupied by the style,with no room for nectar.The length of this portion of the corolla tube was more variable(higher CV)than the upper part of the corolla tube,suggesting that functional tube depth was under stronger stabilizing selection.The degree of style coiling was negatively related to the corolla-tube length in all three populations of R.schneideriana,suggesting that there may be conflicting selection acting on style length and corolla-tube length,which are otherwise usually tightly correlated.Given the lack of nectar in the flowers of this species,the long corolla tubes and long styles may represent morphological holdovers from ancestors that were pollinated by long-tongued pollinators,as is still seen in related species in the western Himalayas.
文摘This study takes a fractured rock mass in the Datengxia Hydropower Station,China as an example to analyze the size effects and determine the representative elementary sizes.A novel method considering geometric parameter distributions is proposed in this work.The proposed method can quickly and simply determine the size effects and representative elementary sizes.Specifically,geometric parameter distributions,including fracture frequency,size and orientation,are generated on the basis of the Bernoulli trial and Monte Carlo simulation.The distributions are assessed using the coefficient of variation(CV),and the acceptable variations for CV(5%,10%and 20%)are used to determine representative elementary sizes.Generally,the representative element of rock masses is the representative elementary volume(REV).The present study extends the representative element to other dimensions,i.e.representative elementary length(REL)and representative elementary area(REA)for one and two dimensions,respectively.REL and REA are useful in studying the size effects of one-(1D)and twodimensional(2D)characteristics of rock masses.The relationships among multi-dimensional representative elementary sizes are established.The representative elementary sizes reduce with the increase in the dimensions,and REA and REV can be deduced by REL.Therefore,the proposed method can quickly and simply determine REL and further estimate REA and REV,which considerably improves the efficiency of rock mass analysis.
基金the grant names“ProfessionalDevelopment Research University Grant”(“UTM Vot No.05E69”and“TDR grant Vot No.05G27”).
文摘Visible light communication(VLC),which is a prominent emerging solution that complements the radio frequency(RF)technology,exhibits the potential to meet the demands of fifth-generation(5G)and beyond technologies.The random movement of mobile terminals in the indoor environment is a challenge in the VLC system.The model of optical attocells has a critical role in the uniform distribution and the quality of communication links in terms of received power and signal-to-noise ratio(SNR).As such,the optical attocells positions were optimized in this study with a developed try and error(TE)algorithm.The optimized optical attocells were examined and compared with previous models.This novel approach had successfully increased minimum received power from−1.29 to−0.225 dBm,along with enhanced SNR performance by 2.06 dB.The bit error rate(BER)was reduced to 4.42×10−8 and 6.63×10−14 by utilizing OOK-NRZ and BPSK modulation techniques,respectively.The optimized attocells positions displayed better uniform distribution,as both received power and SNR performances improved by 0.45 and 0.026,respectively.As the results of the proposed model are optimal,it is suitable for standard office and room model applications.
基金funded by the National Natural Science Foundation of China(41875019&41905009)Basic Business Expenses(IDM2019002&IDM2016005)+1 种基金Chinese Desert Meteorological Science Research Found(Sqj2018019)Flexible Talents Introducing Project of Xinjiang(2018)。
文摘The size distribution of airborne dust particles is an important parameter in the measurement of dust emissions due to wind erosion,and a quantitative and accurate description is necessary.Observations regarding the size distribution of airborne dust particles are currently lacking in Tibetan Plateau(TP).This study aims to obtain a dust particle size distribution and compare the difference in spatial distribution at a field site(FS)and two urban observation sites(Minfeng and Hetian),in the north of the TP,under the condition of the dust-days and clear-days.The observation data was collected from 5 July to 4 August,2019.The mass concentration of dust(PM20)was measured with a 10-stage quartz crystal microbalance cascade impactor.The results suggested that 91.9%of the particles were less than 1.4μm on clear-days,and particles of d≥1.4μm increased to 27.2%with the occurrence of the dust events.More than 80%of the airborne dust particles were less than 1.4μm for each friction velocity.The proportion of d<0.7μm was the greatest at 3.0 m(above the surface,similarly hereinafter)on dust-days,while the proportion of d>0.7μm was the greatest at 0.5 m on clear-days.During urban observation,with the occurrence of dust events,the concentration of a particle size greater than 2.5μm increased most significantly in Minfeng,while the concentration of a particle size less than 0.7μm increased most significantly in Hetian.Moreover,the proportion of particles with d<0.7μm had the smallest difference,while the proportion of particles with d>1.4μm had the most obvious difference among these three sites.
文摘The flow and mixing behavior of two miscible liquids has been studied in an innovative static mixer by using CFD,with Reynolds numbers ranging from 20 to 160.The performance of the new mixer is compared with those of Kenics,SMX,and Komax static mixers.The pressure drop ratio(Z-factor),coefficient of variation(CoV),and extensional efficiency(α)features have been used to evaluate power consumption,distributive mixing,and dispersive mixing performances,respectively,in all mixers.The model is firstly validated based on experimental data measured for the pressure drop ratio and the coefficient of variation.CFD results are consistent with measured data and those obtained by available correlations in the literature.The new mixer shows a superior mixing performance compared to the other mixers.
基金This project was supported by the National Natural Science Foundation of China (60364001), the Shandong ProvincialNatural Science Foundation of China (Y2004A04) and Fujian Provincial Education Foundation of China(JA04268).
文摘Using S-rough sets, this paper gives the concepts off-heredity knowledge and its heredity coefficient, and f-variation coefficient of knowledge; presents the theorem of f-attribute dependence of variation coefficient and the relation theorem of heredity-variation. The attribute dependence of f-variation coefficient and the relation of heredity-variation are important characteristics of S-rough sets. From such discussion, this paper puts forward the heredity mining off-knowledge and the algorithm of heredity mining, also gives its relative application.
基金Project supported by the Hi-Tech Research and Development Program (863) of China(No.2002AA601013).
文摘Vertical and temporal distributions of N and P in soil solution in aquatic-terrestrial ecotone (ATE) of Taihu Lake were investigated, and the relations among N, P, ORP (oxidation reduction potential), TOC, root system biomass and microorganism were studied. As a whole, significant declines in TN, NO3^--N, DON (dissolved organic nitrogen) and TP concentration in soil solution have occurred with increase of the depth, and reached their minima at 60 cm depth, except for NH4^+-N, which increased with depth. The concentration of TP increased gradually from spring to winter in the topsoil, the maximum 0.08 mg/L presented in the winter while the minimum 0.03 mg/L in spring. In the deeper layer, the concentration value of TP fluctuated little. As for the NO3^--N, its seasonal variation was significant at 20 cm depth, its concentration increased gradually from spring to autumn, and decreased markedly in winter. Vertical and temporal distribution of DON is contrary to that of NO3^--N. The results also show that the variation of N and P in the percolate between adjacent layers is obviously different. The vertical variation ofTN, TP, NO3^--N, NH4^+-N and DON is significant, of which the variation coefficient of NO3^--N along the depth reaches 100.23%, the highest; while the variation coefficient of DON is 41.14%, the smallest. The results of correlation analysis show that the concentration of nitrogen and phosphorus correlate significantly with TOC, ORP, root biomass and counts of nitrifying bacteria. Most nutrients altered much from 20 to 40 cm along the depth. However, DON changed more between 60 and 80 cm. Results show that soil of 0-60 cm depth is active rhizoplane, with strong capability to remove the nitrogen and phosphorus in ATE. It may suggest that there exists the optimum ecological efficiency in the depth of above 60 cm in reed wetland. This will be very significant for ecological restoration and reestablishment.
基金financially supported by the National Natural Science Foundation of China(No.51405002)
文摘High temperature compressive strength is one of the most important performances of resin sand; its value directly concerns the quality of castings. In order to seek the best testing method of resin sand high temperature compressive strength, a self-developed instrument was used to carry out experiments, and the sample shape and size were designed and studied. The results show that a hollow cylinder sample can reflect the strength difference of different resin sands better than a solid cylinder sample, and its data is stable. The experiments selected Φ20/5×30 mm as the size of the hollow cylinder samples. The high temperature compressive strengths of phenol-formaldehyde resin coated sand, furan resin self-setting sand, and TEA resin sand were each tested. For the resin sand used for cast steel and cast iron, 1,000 oC was selected as the test temperature; for the resin sand used for cast non-ferrous al oy, 800 oC was selected as the test temperature; and for all the resin sand samples, 1 min was selected as the holding time. This testing method can truthfully reflect the high temperature performance of three kinds of resin sand; it is reproducible, and the variation coefficients of test values are under 10%.
基金National Natural Science Foundations of China(Nos.41172236,41402243,and 40911120044)Basic Research Project of Jilin University,China(No.450060491448)
文摘Post-construction settlement has gained increasing attention because it frequently causes engineering problems. A combined model is a commonly used prediction model that overcomes the difficulty of a single model( i. e., cannot reflect various regulations of settlement at some stages or the entire process). In this study,the correlation coefficient,maximum error values,and other values were obtained according to the fitting and predicted results of a single model. The coefficient of variation was then introduced to determine the weight of each model forming the combination. The proposed model was used to fit and predict for settlement and overcome the issue of utilizing a single model while determining the weight. The fitting predictive effect was also analyzed using the settlement fitting precision results. The fitting precision of optimizing the combination model is high. The predicted data of the post-construction settlement are closer to the calculated value of the settlement monitoring data. Moreover,the proposed model has good practicability,does not require the interval data of settlement,and restricts the model number. Thus,this model can be applied in the engineering field.
文摘In this paper,the variation of annual rainfall in Xinjiang by variation coefficient (C_v) widely used in statistics and hydrology is studied.Based on analysing of 25 years' observational data in 98 stations,the authors found that the varia- tion coefficient of annual rainfall has better relation with annual rainfall and sea level elevation,which can be expressed by a bivariate function.This discovery is no doubt valuable to the study of climatic theory and water resources in the area where data are rare.
基金The research is supported by the National Natural Science Foundation of China (Grant No. 51275299)
文摘To improve the welding efficiency of conventional arc welding, triple-electrode fillet welding was proposed and developed. Stability of triple-electrode fillet welding process is the assurance for ideal joint. The evaluation model for arc fluctuations of triple-electrode fillet welding was established based on the characteristic parameters and their variation coefficients. This model indicated that variation coefficients could reflect arc voltage flnctuations of welding process, and its analysis result was consistent with the actual welding process.