An electrostatic Quasi coherent mode has been observed in density fluctuations and perpendicular velocity fluctuations with the frequency range of 3–80 k Hz on the Experimental Advanced Superconducting Tokamak using ...An electrostatic Quasi coherent mode has been observed in density fluctuations and perpendicular velocity fluctuations with the frequency range of 3–80 k Hz on the Experimental Advanced Superconducting Tokamak using multi-channel Doppler reflectometry.It appears in the edge localized mode(ELM)-free period after L-H transition or in the inter-ELM period.The mode rotates almost together with the plasma with the poloidal wave number around 0.6cm-1 and its frequency chirps with plasma poloidal velocity.The mode can exist in a large radial coverage(ρ=0.75–0.98),and peaks near the top of pedestal,suggesting that it might be excited in the steep gradient pedestal region,and spread into the core area.展开更多
The influence of a molybdenum dust buildup on plasma edge turbulence has been studied in the EAST tokamak.The motion of the dust from the upper divertor region is detected by a fast visible CCD camera,the XUV spectrom...The influence of a molybdenum dust buildup on plasma edge turbulence has been studied in the EAST tokamak.The motion of the dust from the upper divertor region is detected by a fast visible CCD camera,the XUV spectrometer arrays,and the EUV spectrometer.The MoXV emission intensity sharply increases compared with the spectral lines of various ionization states of other elements,which implies that the dust particles are the molybdenum impurities.The radial distribution of Mo^(14+)ion simulated by a simplified 1 D transport model indicates that the molybdenum dust mainly deposits in the pedestal bottom region.Moreover,it is observed that the coherent mode(CM)appears atρ=0.94 after the molybdenum impurities enter the main plasma region.The influx of molybdenum impurities results in increasing pedestal electron density and decreasing pedestal electron temperature in contrast to that before the event of impurities dropping.It is also found that the electron density gradient in the pedestal increases when the ablation of the molybdenum impurities is observed in the pedestal region.The qualitative experimental results indicate that the onset of CM is likely related to the increase of the density gradient and edge collisionality in the pedestal.In comparison to the density gradient,the enhancement of CM amplitude largely depends on the increase of the edge collisionality.展开更多
We compare three different methods to extract coherent modes from Doppler backscattering （DBS）, which are center of gravity （COG） of the complex amplitude spectrum, spectrum of DBS phase derivative （phase derivat...We compare three different methods to extract coherent modes from Doppler backscattering （DBS）, which are center of gravity （COG） of the complex amplitude spectrum, spectrum of DBS phase derivative （phase derivative method）, and phase spectrum, respectively. These three methods are all feasible to extract coherent modes, for example, geodesic acoustic mode oscillation. However, there are stilI differences between dealing with high frequency modes （several hundred kHz） and low frequency modes, （several kHz） hiding in DBS signal. There is a significant amount of power at low frequencies in the phase spectrum, which can be removed by using the phase derivative method and COG. High frequency modes are clearer by using the COO and the phase derivative method than the phase spectrum. The spectrum of DBS amplitude does not show the coherent modes detected by using COG, phase derivative method and phase spectrum. When two Doppler shifted peaks exist, coherent modes and their harmonics appear in the spectrum of DBS amplitude, which are introduced by the DBS phase.展开更多
A new definition of the alternative coherent-mode representation of a random planar source with the a priori unknown statistical properties is proposed. This definition is based on the measurements of the source cross...A new definition of the alternative coherent-mode representation of a random planar source with the a priori unknown statistical properties is proposed. This definition is based on the measurements of the source cross-spectral density followed by the optimal approximation of the obtained results in the chosen basis of modal functions. The proposed definition is illustrated by the results of numerical simulation.展开更多
A few-mode fiber （FMF） is designed to support three spatial modes （LP01, LP 11a, and LP 11 b） and fabricated through plasma chemical vapor deposition （PCVD）and rod-in-tube （RIT） method. Using PDM-DFTS-OFDM- 32...A few-mode fiber （FMF） is designed to support three spatial modes （LP01, LP 11a, and LP 11 b） and fabricated through plasma chemical vapor deposition （PCVD）and rod-in-tube （RIT） method. Using PDM-DFTS-OFDM- 32QAM modulation, wavelength division multiplexing, mode multiplexing, and coherent detection, we successfully demonstrated 200Tb/s （375× 3 × 178.125Gb/s） signal over 1 km FMF using C and L bands with 25 GHz channel spacing. After 1 km FMF transmission, all the tested bit error rates （BERs） are below 20% forward error correction （FEC） threshold （2.0 × 10-2）. Within each sub-channel, we achieved a spectral efficiency of 21.375 bits/Hz in the C and L bands.展开更多
基金supported in part by the National MCF Energy R&D Program of China(Nos.2018YFE0311200,2017YFE0301204 and 2017YFE0301700)National Natural Science Foundation of China(Nos.11635008,U1967206 and 11975231)。
文摘An electrostatic Quasi coherent mode has been observed in density fluctuations and perpendicular velocity fluctuations with the frequency range of 3–80 k Hz on the Experimental Advanced Superconducting Tokamak using multi-channel Doppler reflectometry.It appears in the edge localized mode(ELM)-free period after L-H transition or in the inter-ELM period.The mode rotates almost together with the plasma with the poloidal wave number around 0.6cm-1 and its frequency chirps with plasma poloidal velocity.The mode can exist in a large radial coverage(ρ=0.75–0.98),and peaks near the top of pedestal,suggesting that it might be excited in the steep gradient pedestal region,and spread into the core area.
基金supported by Shenzhen Clean Energy Research Institutesupported by the National Key R&D Program of China (No. 2017YFE0301205)National Natural Science Foundation of China (Nos. 11875289, 11975271, 11605244, 11675211, 12075284, 12075283, 12075155 and 11875294)
文摘The influence of a molybdenum dust buildup on plasma edge turbulence has been studied in the EAST tokamak.The motion of the dust from the upper divertor region is detected by a fast visible CCD camera,the XUV spectrometer arrays,and the EUV spectrometer.The MoXV emission intensity sharply increases compared with the spectral lines of various ionization states of other elements,which implies that the dust particles are the molybdenum impurities.The radial distribution of Mo^(14+)ion simulated by a simplified 1 D transport model indicates that the molybdenum dust mainly deposits in the pedestal bottom region.Moreover,it is observed that the coherent mode(CM)appears atρ=0.94 after the molybdenum impurities enter the main plasma region.The influx of molybdenum impurities results in increasing pedestal electron density and decreasing pedestal electron temperature in contrast to that before the event of impurities dropping.It is also found that the electron density gradient in the pedestal increases when the ablation of the molybdenum impurities is observed in the pedestal region.The qualitative experimental results indicate that the onset of CM is likely related to the increase of the density gradient and edge collisionality in the pedestal.In comparison to the density gradient,the enhancement of CM amplitude largely depends on the increase of the edge collisionality.
基金Supported by the National Natural Science Foundation of China under Grant Nos 10990210 and 11475173the National Magnetic Confinement Fusion Energy Program of China under Grant Nos 2013GB106002 and 2014GB109002
文摘We compare three different methods to extract coherent modes from Doppler backscattering （DBS）, which are center of gravity （COG） of the complex amplitude spectrum, spectrum of DBS phase derivative （phase derivative method）, and phase spectrum, respectively. These three methods are all feasible to extract coherent modes, for example, geodesic acoustic mode oscillation. However, there are stilI differences between dealing with high frequency modes （several hundred kHz） and low frequency modes, （several kHz） hiding in DBS signal. There is a significant amount of power at low frequencies in the phase spectrum, which can be removed by using the phase derivative method and COG. High frequency modes are clearer by using the COO and the phase derivative method than the phase spectrum. The spectrum of DBS amplitude does not show the coherent modes detected by using COG, phase derivative method and phase spectrum. When two Doppler shifted peaks exist, coherent modes and their harmonics appear in the spectrum of DBS amplitude, which are introduced by the DBS phase.
文摘A new definition of the alternative coherent-mode representation of a random planar source with the a priori unknown statistical properties is proposed. This definition is based on the measurements of the source cross-spectral density followed by the optimal approximation of the obtained results in the chosen basis of modal functions. The proposed definition is illustrated by the results of numerical simulation.
基金Aeknowledgements This work was supported by the Major Scientific and Technological hmovation Projects of Hubci Province （No. 2014AAA001）, the National Basic Research Program of China （Nos. 2014CB340100, 2014CB340101, and 2014CB340105）. and the Natural Science Foundation of Hubei Prov incc （No. 2015CFA056）.
文摘A few-mode fiber （FMF） is designed to support three spatial modes （LP01, LP 11a, and LP 11 b） and fabricated through plasma chemical vapor deposition （PCVD）and rod-in-tube （RIT） method. Using PDM-DFTS-OFDM- 32QAM modulation, wavelength division multiplexing, mode multiplexing, and coherent detection, we successfully demonstrated 200Tb/s （375× 3 × 178.125Gb/s） signal over 1 km FMF using C and L bands with 25 GHz channel spacing. After 1 km FMF transmission, all the tested bit error rates （BERs） are below 20% forward error correction （FEC） threshold （2.0 × 10-2）. Within each sub-channel, we achieved a spectral efficiency of 21.375 bits/Hz in the C and L bands.
