Ni-Cu/ZrO2-CeO2-Al2O3 catalysts were prepared by co-precipitation method at pH=9 and using Na2CO3 as the precipitant. The Ni loading （mass fraction） of the catalysts was 10%. The catalysts were characterized by X-ra...Ni-Cu/ZrO2-CeO2-Al2O3 catalysts were prepared by co-precipitation method at pH=9 and using Na2CO3 as the precipitant. The Ni loading （mass fraction） of the catalysts was 10%. The catalysts were characterized by X-ray diffraction, temperature-programmed oxidation （TPO）, scanning electron microscope （SEM）, and X-ray photoelectron spectroscopy （XPS）. The effects of calcined temperature of support on coke deposition were studied. TPO, SEM and XPS results indicated there was no peak of higher temperature oxygen consumption on Ni-Cu/ZrO2-CeO2-Al2O3 catalyst （support was calcined at 800 ℃）, which could lead to the deactivation of the catalyst. The carbon species were carbonate and inactive carbon （filamentous carbon species） on the surface of catalyst reacting for 40 h which perhaps led to the deactivation of the catalyst.展开更多
Rhodium- and iron phosphate-based catalysts are by far the most promising catalysts for oxy-bromination of methane(OBM) reaction. However, most literature reported either Rh- or FePO4-based catalysts, and the results ...Rhodium- and iron phosphate-based catalysts are by far the most promising catalysts for oxy-bromination of methane(OBM) reaction. However, most literature reported either Rh- or FePO4-based catalysts, and the results were rarely studied in a uniform environmental condition. In this report, comparative study was conducted on silica- and silicon carbide-supported rhodium and iron phosphate catalysts with the main focuses on stability performance and coke deposition. The catalytic results demonstrated that the stability of both Rh- and FePO4-based catalysts was greatly influenced by the supports used, and silicon carbide-supported catalysts showed much better anti-coking ability as compared with silica-supported ones. Temperature-programmed oxidation over the used catalysts further indicated that the coke formation mechanisms were completely different between silica-supported rhodium and iron phosphate catalysts. While cokes might be caused by condensation of CH2Br2over supported iron phosphate, methane decomposition might be the reason for coke formation over silica-supported rhodium catalyst. These findings might pave the way for designing highly efficient and stable catalysts of the OBM reaction.展开更多
Hierarchical ZSM-5 zeolites with micro-, meso- and macroporosity were prepared from diatomite zeolitization through a vapor-phase transport process on solid surfaces. The aromatization performance of the catalysts was...Hierarchical ZSM-5 zeolites with micro-, meso- and macroporosity were prepared from diatomite zeolitization through a vapor-phase transport process on solid surfaces. The aromatization performance of the catalysts was in- vestigated on a fixed bed reactor by using FCC gasoline as feedstock. The crystal phase, morphology, pore struc- tures, acidity and coke depositions of the hierarchical ZSM-5 zeolites were characterized by means of X-ray diffrac- tion （XRD）, scanning electron microscope （SEM）, N2 adsorption/desorption, Fourier transform infrared （FT-IR） and thermogravimetry-mass spectrogram （TG-MS）, respectively. The results show that the prepared hierarchical ZSM-5 zeolite possesses excellent porosity and high crystallinity, displaying an improved aromatization performance and carbon deposition resistance due to its meso- and macroporous structures.展开更多
Carbon deposition on nickel powders in methane involves three stages in different reaction temperature ranges. Temperature programing oxidation test and Raman spectrum results indicated the formation of complex and or...Carbon deposition on nickel powders in methane involves three stages in different reaction temperature ranges. Temperature programing oxidation test and Raman spectrum results indicated the formation of complex and ordered carbon structures at high deposition temperatures. The values of I（D）/I（G） of the deposited carbon reached 1.86, 1.30, and 1.22 in the first, second, and third stages, respectively. The structure of carbon in the second stage was similar to that in the third stage. Carbon deposited in the first stage rarely contained homogeneous pyrolytic deposit layers. A kinetic model was developed to analyze the carbon deposition behavior in the first stage. The rate-determining step of the first stage is supposed to be interfacial reaction. Based on the investigation of carbon deposition kinetics on nickel powders from different resources, carbon deposition rate is suggested to have a linear relation with the square of specific surface area of nickel particles.展开更多
The regeneration of fluidized catalytic cracking(FCC)catalysts is an essential process in petroleum processing.The current study focused the regeneration reaction characteristics of spent fluidized catalytic cracking ...The regeneration of fluidized catalytic cracking(FCC)catalysts is an essential process in petroleum processing.The current study focused the regeneration reaction characteristics of spent fluidized catalytic cracking catalyst(SFCC)at different atmospheres with influences on pore evolution and activity,for a potential way to reduce emission,produce moderate chemical product(CO),and maintain catalyst activity.The results show that regeneration in air indicates a satisfaction on removing coke on the catalyst surface while giving a poor effect on eliminating the coke inside micropores.This is attributed that the combustion in air led to a higher temperature and further transformed kaolinite phase to silicaaluminum spinel crystals,which tended to collapse and block small pores or expand large pores,with similar results observed in pure O_(2)atmosphere.Nevertheless,catalysts regenerated in O_(2)/CO_(2)diminished the combustion damage to the pore structure,of which the micro porosity after regeneration increased by 32.4% and the total acid volume rose to 27.1%.The regeneration in pure CO_(2)displayed low conversion rate due to the endothermic reaction and low reactivity.The coexistence of gasification and partial oxidation can promote regeneration and maintain the original structure and good reactivity.Finally,a mechanism of the regeneration reaction at different atmospheres was revealed.展开更多
Catalytic oxidation of CH_(4) has been proved to be an attractive option for landfill gas(LFG) upgrading.However, coking of catalysts in catalytic LFG deoxygen has been clearly observed in industrial applications. In ...Catalytic oxidation of CH_(4) has been proved to be an attractive option for landfill gas(LFG) upgrading.However, coking of catalysts in catalytic LFG deoxygen has been clearly observed in industrial applications. In this regard, it is necessary to investigate whether coke deposition originates from CH_(4) or volatile organic compounds present in LFG, and the influence of coke deposition on catalytic performance. Herein,we evaluate the LFG deoxygen on Pt/γ-Al_(2)O_(3) catalyst in simulated LFG(CH_(4), CO_(2), O_(2), N_(2)) and its co-feed with representative volatile organic compounds, ethylbenzene, toluene, benzene and cyclohexane. The results show that the coking of the catalyst is originated from volatile organic compounds rather than CH_(4). The Pt/γ-Al_(2)O_(3) catalyst does not deactivate during LFG deoxygen process, even significant amount of coke deposited, up to 18.15%(mass). Characterization analyses reveal that although coke deposition overall covers the catalyst surface, resulting in mesopores blockage and a reduced number of accessible Pt sites, however, the coke formed, H-rich carbonaceous components, behaves as counterpart for O_(2) elimination. Besides, the coke deposited is mainly filamentous. Thus, coke formation has little negative effect on the overall catalytic performance of Pt/γ-Al_(2)O_(3) catalyst ultimately. The results obtained in this work are helpful for the rational design of robust Pt based catalysts for LFG deoxygen without undue attention to their coking properties, and also favor the innovation of more attractive purification scheme configurations.展开更多
Catalyst deactivation due to coking is microscopically analyzed,then a model is presented,based upon the analogy between coke deposition and solid aggregation.The Monte Carlo simulation results show that the model ca...Catalyst deactivation due to coking is microscopically analyzed,then a model is presented,based upon the analogy between coke deposition and solid aggregation.The Monte Carlo simulation results show that the model can fit the experimental data in all cases.With this model,the mechanism of formation of coke with different shapes is derived and the relation between the catalytic activity and coke shape is theoretically demonstrated.In addition,the model described in this paper can also be used to simulate the catalyst preparation so as to make more useful and efficient catalysts.The model in this paper is very simple,with only two parameters that indicate the nature of catalyst deactivation.The extension of the model to more complicated systems is also discussed.展开更多
Ni/Al\-2O\-3 catalyst was prepared by impregnating α \|Al\-2O\-3 with Ni(NO\-3)\-2 aqueous solution, and characterized by temperature programmed reduction (TPR), X\|ray diffraction (XRD) and X\|ray photoelectron spec...Ni/Al\-2O\-3 catalyst was prepared by impregnating α \|Al\-2O\-3 with Ni(NO\-3)\-2 aqueous solution, and characterized by temperature programmed reduction (TPR), X\|ray diffraction (XRD) and X\|ray photoelectron spectroscopy (XPS) techniques. The effects of Ni content, calcination temperature and activation conditions (such as reduction temperature and time) on coke deposition on the catalyst were studied. The results showed that the interaction between Ni and Al\-2O\-3 benefits to improve the stability and the resistance to coke deposition of the catalyst, though the activity of the catalyst was decreased to a certain extent.展开更多
文摘Ni-Cu/ZrO2-CeO2-Al2O3 catalysts were prepared by co-precipitation method at pH=9 and using Na2CO3 as the precipitant. The Ni loading （mass fraction） of the catalysts was 10%. The catalysts were characterized by X-ray diffraction, temperature-programmed oxidation （TPO）, scanning electron microscope （SEM）, and X-ray photoelectron spectroscopy （XPS）. The effects of calcined temperature of support on coke deposition were studied. TPO, SEM and XPS results indicated there was no peak of higher temperature oxygen consumption on Ni-Cu/ZrO2-CeO2-Al2O3 catalyst （support was calcined at 800 ℃）, which could lead to the deactivation of the catalyst. The carbon species were carbonate and inactive carbon （filamentous carbon species） on the surface of catalyst reacting for 40 h which perhaps led to the deactivation of the catalyst.
基金supported by the National Natural Science Foundation of China(Grant No.21103170)
文摘Rhodium- and iron phosphate-based catalysts are by far the most promising catalysts for oxy-bromination of methane(OBM) reaction. However, most literature reported either Rh- or FePO4-based catalysts, and the results were rarely studied in a uniform environmental condition. In this report, comparative study was conducted on silica- and silicon carbide-supported rhodium and iron phosphate catalysts with the main focuses on stability performance and coke deposition. The catalytic results demonstrated that the stability of both Rh- and FePO4-based catalysts was greatly influenced by the supports used, and silicon carbide-supported catalysts showed much better anti-coking ability as compared with silica-supported ones. Temperature-programmed oxidation over the used catalysts further indicated that the coke formation mechanisms were completely different between silica-supported rhodium and iron phosphate catalysts. While cokes might be caused by condensation of CH2Br2over supported iron phosphate, methane decomposition might be the reason for coke formation over silica-supported rhodium catalyst. These findings might pave the way for designing highly efficient and stable catalysts of the OBM reaction.
文摘Hierarchical ZSM-5 zeolites with micro-, meso- and macroporosity were prepared from diatomite zeolitization through a vapor-phase transport process on solid surfaces. The aromatization performance of the catalysts was in- vestigated on a fixed bed reactor by using FCC gasoline as feedstock. The crystal phase, morphology, pore struc- tures, acidity and coke depositions of the hierarchical ZSM-5 zeolites were characterized by means of X-ray diffrac- tion （XRD）, scanning electron microscope （SEM）, N2 adsorption/desorption, Fourier transform infrared （FT-IR） and thermogravimetry-mass spectrogram （TG-MS）, respectively. The results show that the prepared hierarchical ZSM-5 zeolite possesses excellent porosity and high crystallinity, displaying an improved aromatization performance and carbon deposition resistance due to its meso- and macroporous structures.
基金financially supported by the National Program on Key Basic Research Project of China (973 Program, No. 2012CB215405)the National Natural Science Foundation of China (No. 51174022)
文摘Carbon deposition on nickel powders in methane involves three stages in different reaction temperature ranges. Temperature programing oxidation test and Raman spectrum results indicated the formation of complex and ordered carbon structures at high deposition temperatures. The values of I（D）/I（G） of the deposited carbon reached 1.86, 1.30, and 1.22 in the first, second, and third stages, respectively. The structure of carbon in the second stage was similar to that in the third stage. Carbon deposited in the first stage rarely contained homogeneous pyrolytic deposit layers. A kinetic model was developed to analyze the carbon deposition behavior in the first stage. The rate-determining step of the first stage is supposed to be interfacial reaction. Based on the investigation of carbon deposition kinetics on nickel powders from different resources, carbon deposition rate is suggested to have a linear relation with the square of specific surface area of nickel particles.
基金supported by the National Natural Science Foundation of China(21908063)the Shanghai Pujiang Program(21PJ1402300)the Fundamental Research Funds of the Central Universities(JKB01211715 and JKB01221677)。
文摘The regeneration of fluidized catalytic cracking(FCC)catalysts is an essential process in petroleum processing.The current study focused the regeneration reaction characteristics of spent fluidized catalytic cracking catalyst(SFCC)at different atmospheres with influences on pore evolution and activity,for a potential way to reduce emission,produce moderate chemical product(CO),and maintain catalyst activity.The results show that regeneration in air indicates a satisfaction on removing coke on the catalyst surface while giving a poor effect on eliminating the coke inside micropores.This is attributed that the combustion in air led to a higher temperature and further transformed kaolinite phase to silicaaluminum spinel crystals,which tended to collapse and block small pores or expand large pores,with similar results observed in pure O_(2)atmosphere.Nevertheless,catalysts regenerated in O_(2)/CO_(2)diminished the combustion damage to the pore structure,of which the micro porosity after regeneration increased by 32.4% and the total acid volume rose to 27.1%.The regeneration in pure CO_(2)displayed low conversion rate due to the endothermic reaction and low reactivity.The coexistence of gasification and partial oxidation can promote regeneration and maintain the original structure and good reactivity.Finally,a mechanism of the regeneration reaction at different atmospheres was revealed.
基金the financial supports from the National Natural Science Foundation of China (22076077, 21577060)Jiangsu Science and Technology Department (BK20191256)Analysis & Test Fund of Nanjing University。
文摘Catalytic oxidation of CH_(4) has been proved to be an attractive option for landfill gas(LFG) upgrading.However, coking of catalysts in catalytic LFG deoxygen has been clearly observed in industrial applications. In this regard, it is necessary to investigate whether coke deposition originates from CH_(4) or volatile organic compounds present in LFG, and the influence of coke deposition on catalytic performance. Herein,we evaluate the LFG deoxygen on Pt/γ-Al_(2)O_(3) catalyst in simulated LFG(CH_(4), CO_(2), O_(2), N_(2)) and its co-feed with representative volatile organic compounds, ethylbenzene, toluene, benzene and cyclohexane. The results show that the coking of the catalyst is originated from volatile organic compounds rather than CH_(4). The Pt/γ-Al_(2)O_(3) catalyst does not deactivate during LFG deoxygen process, even significant amount of coke deposited, up to 18.15%(mass). Characterization analyses reveal that although coke deposition overall covers the catalyst surface, resulting in mesopores blockage and a reduced number of accessible Pt sites, however, the coke formed, H-rich carbonaceous components, behaves as counterpart for O_(2) elimination. Besides, the coke deposited is mainly filamentous. Thus, coke formation has little negative effect on the overall catalytic performance of Pt/γ-Al_(2)O_(3) catalyst ultimately. The results obtained in this work are helpful for the rational design of robust Pt based catalysts for LFG deoxygen without undue attention to their coking properties, and also favor the innovation of more attractive purification scheme configurations.
基金the financial support of the grant PID2019-107357RB-I00 funded by MCIU/AEI/10.13039/501100011033 and "ERDF,a way of making Europe"the grants TED2021-132056B-I00 and PLEC2021-008062 funded by MCIN/AEI/10.13039/ 501100011033 and"European Union NextGenerationEU/ PRTR"+1 种基金the grant IT1645-22 funded by the Basque Governmentfunding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No.823745。
基金Supported by the National Natural Science Foundation of China(No.2 97760 38)
文摘Catalyst deactivation due to coking is microscopically analyzed,then a model is presented,based upon the analogy between coke deposition and solid aggregation.The Monte Carlo simulation results show that the model can fit the experimental data in all cases.With this model,the mechanism of formation of coke with different shapes is derived and the relation between the catalytic activity and coke shape is theoretically demonstrated.In addition,the model described in this paper can also be used to simulate the catalyst preparation so as to make more useful and efficient catalysts.The model in this paper is very simple,with only two parameters that indicate the nature of catalyst deactivation.The extension of the model to more complicated systems is also discussed.
文摘Ni/Al\-2O\-3 catalyst was prepared by impregnating α \|Al\-2O\-3 with Ni(NO\-3)\-2 aqueous solution, and characterized by temperature programmed reduction (TPR), X\|ray diffraction (XRD) and X\|ray photoelectron spectroscopy (XPS) techniques. The effects of Ni content, calcination temperature and activation conditions (such as reduction temperature and time) on coke deposition on the catalyst were studied. The results showed that the interaction between Ni and Al\-2O\-3 benefits to improve the stability and the resistance to coke deposition of the catalyst, though the activity of the catalyst was decreased to a certain extent.
