Influence of hydrogen-enriched atmosphere under coke oven gas injection on reduction swelling behaviors of oxidized pellet

It is of great importance to elucidate reduction swelling behaviors and reaction mechanism of oxidized pellet in hydrogen-enriched atmosphere under coke oven gas injection. In this work, the effects of hydrogen concentration in N_2-CO-H_2 atmosphere with unchanged CO content on reduction swelling behaviors of oxidized pellet at 1173 K were studied, to clarify the mechanism of hydrogen-enriched reduction and exclude the influences of CO. Then, the reduction swelling behaviors of oxidized pellet at 1173 K in actual atmosphere under coke oven gas(COG) injection, got from the simulation results of multi-fluid blast furnace model, were investigated. The results show that with the concentration of hydrogen increasing in N_2-CO-H_2 gas from 2% to 18%, the reduction swelling index of pellet decreases from 10.12% to 5.57% while the reduction ratio of pellet increases obviously from 39.85% to 69.58%. In addition, with COG injection rate increasing from 0 to 152.34 m^3/t, the reduction swelling index of pellet decreases slightly from 10.71% to 9.54% while the reduction ratio of pellet is increased from 31.57% to 36.39%. The microstructures of pellet are transformed from the platy structure to the flocculent structure.

Effect of Cr2O3 addition on oxidation induration and reduction swelling behavior of chromium-bearing vanadium titanomagnetite pellets with simulated coke oven gas

The oxidation induration and reduction swelling behavior of chromium-bearing vanadium titanomagnetite pellets(CVTP)with Cr2O3 addition were studied,and the reduction swelling index(RSI)and compressive strength(CS)of the reduced CVTP with simulated coke oven gas(COG)injection were investigated.The results showed that the CS of the CVTP decreases and the porosity of the CVTP increases with increasing amount of Cr2O3 added.The Cr2O3 mainly exists in the form of(Cr,Fe)2O3 solid solution in the CVTP and as Fe-Cr in the reduced CVTP.The CS of the reduced CVTP increases and the RSI of the reduced CVTP decreases with increasing amount of Cr2O3 added.The limited aggregation and diffusion of metallic iron contribute to the formation of dense lamellar crystals,which leads to the slight decrease for reduction swelling behavior of reduced CVTP.This work provides a theoretical and technical basis for the utilization of CVTP and other Cr-bearing ores such as chromite with COG recycling technology.

Partial oxidation of simulated hot coke oven gas to syngas over Ru-Ni/Mg(Al)O catalyst in a ceramic membrane reactor

Hydrogen amplification from simulated hot coke oven gas （HCOG） was investigated in a BaCo0.7Fe0.2Nb0.1O3-δ （BCFNO） membrane reactor combined with a Ru-Ni/Mg（Al）O catalyst by the partial oxidation of hydrocarbon compounds under atmospheric pressure. Under optimized reaction conditions, the dense oxygen permeable membrane had an oxygen permeation flux around 13.3 ml/（cm^2·min）. By reforming of the toluene and methane, the amount of H2 in the reaction effluent gas was about 2 times more than that of original H2 in simulated HCOG. The Rn-Ni/Mg（Al）O catalyst used in the membrane reactor possessed good catalytic activity and resistance to coking. After the activity test, a small amount of whisker carbon was observed on the used catalyst, and most of them could be removed in the hydrogen-rich atmosphere, implying that the carbon deposition formed on the catalyst might be a reversible process.

Effect of B2O3 addition on oxidation induration and reduction swelling behavior of chromium-bearing vanadium titanomagnetite pellets with simulated coke oven gas

The oxidation induration and reduction swelling behavior of the chromium-bearing vanadium titanomagnetite pellets (CVTP) with B2O3 addition were investigated. Besides, the reduction swelling index (RSI) and compressive strength (CS) of the reduced CVTP were also examined using the simulated coke oven gas (COG). The results suggested that the CS of CVTP was increased from 2448 to 3819.2 N, while the porosity of CVTP was decreased from 14.86% to 10.03% with the increase in B2O3 addition amounts. Moreover, the B2O3 mainly existed in the forms of TiB0.024O2 and Fe3BO5 in both CVTP and the reduced CVTP. Specifically, the CS of the reduced CVTP was elevated from 901 to 956.2 N, while the RSI was reduced from 5.87% to 3.81% as the B2O3 addition amounts were increased. Taken together, B2O3 addition would facilitate the aggregation and diffusion of metallic iron particles, which contributed to reducing the formation of metal iron whiskers and weakening the reduction swelling behavior.

Hydrogen production via chemical looping reforming of coke oven gas

Coke oven gas(COG)is one of the most important by-products in steel industry,and the conversion of COG to value-added products has attracted much attention from both economic and environmental views.In this work,we use the chemical looping reforming technology to produce pure H_(2) from COG.A series of La1-xSrxFeO_(3)(x?0,0.2,0.3,0.4,0.5,0.6)perovskite oxides were prepared as oxygen carriers for this purpose.The reduction behaviors of La1-xSrxFeO_(3) perovskite by different reducing gases(H_(2),CO,CH4 and the mixed gases)are investigated to discuss the competition effect of different components in COG for reacting with the oxygen carriers.The results show that reduction temperatures of H_(2) and CO are much lower than that of CH4,and high temperatures(>800℃)are requested for selective oxidation of methane to syngas.The co-existence of CO and H_(2) shows weak effect on the equilibrium of methane conversion at high temperatures,but the oxidation of methane to syngas can inhibit the consumption of CO and H_(2).The doping of suitable amounts of Sr in LaFeO_(3) perovskite(e.g.,La0.5Sr0.5FeO_(3))significantly promotes the activity for selective oxidation of methane to syngas and inhibits the formation of carbon deposition,obtaining both high methane conversion in the COG oxidation step and high hydrogen yield in the water splitting step.The La0.5Sr0.5FeO_(3) shows the highest methane conversion(67.82%),hydrogen yield(3.34 mmol g^(-1))and hydrogen purity(99.85%).The hydrogen yield in water splitting step is treble as high as the hydrogen consumption in reduction step.These results reveal that chemical looping reforming of COG to produce pure H_(2) is feasible,and an O_(2)-assistant chemical looping reforming process can further improves the redox stability of oxygen carrier.

Perovskite-type oxygen-permeable membrane BaCo_(0.7)Fe_(0.2)Nb_(0.1)O_(3-δ) for partial oxidation of methane in coke oven gas to hydrogen

Perovskite-type oxygen-permeable membrane reactors of BaCo0.7Fe0.2Nb0.1O3-δ （BCFNO） packed with Ru-based catalyst had high oxygen permeability and could be used for hydrogen production by partial oxidation of methane in coke oven gas （COG）. At 1173 K, 94% of methane conversion, 85% of H2 selectivity, 107% of CO selectivity, and as high as 15.4 mL·cm^-2·min^-1 of oxygen permeation flux were obtained. The BCFNO membrane itself had poor catalytic activity to partial oxidation of CH4 in COG. During continuous operation for 70 h at 1173 K, no degradation of the membrane reaction performance was observed. XRD and SEM characterization also demonstrated that the BCFNO membrane reactor exhibited good stability in partial oxidation of methane in COG.

Conversion and reaction kinetics of coke oven gas over a commercial Fe-Mo/Al_2O_3 catalyst

Producing methanol from coke oven gas(COG) is one of the important applications of COG. Removal of sulfur from COG is a key step of this process. Conversion and reaction kinetics over a commercial Fe-Mo/Al2O3 catalyst(T-202) were studied in a continuous flow fixed bed reactor under pressures of 1.6-2.8 MPa, space time of 1.32-3.55 s and temperatures of 240-360 °C. Though the COG contains about 0.6 mol/mol H2, hydrogenation of CO and CO2 is not significant on this catalyst. The conversions of unsaturated hydrocarbons depend on their molecular structures. Diolefins and alkynes can be completely hydrogenated even at relatively low temperature and pressure. Olefins, in contrast, can only be progressively hydrogenated with increasing temperature and pressure. The hydrodesulfurization(HDS) of CS2 on this catalyst is easy. Complete conversion of CS2 was observed in the whole range of the conditions used in this work. The original COS in the COG can also be easily converted to a low level. However, its complete HDS is difficult due to the relatively high concentration of CO in the COG and due to the limitation of thermodynamics. H2 S can react with unsaturated hydrocarbons to form ethyl mercaptan and thiophene, which are then progressively hydrodesulfurized with increasing temperature and pressure. Based on the experimental observations, reaction kinetic models for the conversion of ethylene and sulfur-containing compounds were proposed; the values of the parameters in the models were obtained by regression of the experimental data.

Performance of a tubular oxygen-permeable membrane reactor for partial oxidation of CH_4 in coke oven gas to syngas

A gas-tight BaCo 0.7 Fe 0.2 Nb 0.1 O 3-δ（BCFNO） tubular membrane was fabricated by hot pressure casting.And a membrane reactor with BCFNO tubular membrane and Ag-based sealant was readily constructed and applied to partial oxidation of CH4 in coke oven gas.At 875 ℃,95% of methane conversion,91% of H 2 and as high as 10 ml cm-2·min-1 of oxygen permeation flux were obtained.There was a good match in the coefficient of thermal expansion between Ag-based alloy and BCFNO membrane materials.The tubular BCFNO membrane reactor packed with Ni-based catalysts exhibited not only high activity but also good stability in hydrogen-enriched coke oven gas（COG） atmosphere.

Hydrogen production from simulated hot coke oven gas by catalytic reforming over Ni/Mg(Al)O catalysts

Hydrogen production by catalytic reforming of simulated hot coke oven gas （HCOG） with toluene as a model tar compound was investigated in a fixed bed reactor over Ni/Mg（Al）O catalysts. The catalysts were prepared by a homogeneous precipitation method using urea hydrolysis and characterized by ICE BET, XRD, TPR, TEM and TG. XRD showed that the hydrotalcite type precursor after calcination formed （Ni, Mg）Al2O4 spinel and Ni-Mg-O solid solution structure. TPR results suggested that the increase in Ni/Mg molar ratio gave rise to the decrease in the reduction temperature of Ni^2＋ to Ni^0 on Ni/Mg（Al）O catalysts. The reaction results indicated that toluene and CH4 could completely be converted to H2 and CO in the catalytic reforming of the simulated HCOG under atmospheric pressure and the amount of H2 in the reaction effluent gas was about 4 times more than that in original HCOG. The catalysts with lower Ni/Mg molar ratio showed better catalytic activity and resistance to coking, which may become promising catalysts in the catalytic reforming of HCOG.

Kinetic model on coke oven gas with steam reforming

The effects of factors such as the molar ratio of H2O to CH4 (n(H2O)/n(CH4)), methane conversion temperature and time on methane conversion rate were investigated to build kinetic model for reforming of coke-oven gas with steam. The results of experiments show that the optimal conditions for methane conversion are that the molar ratio of H2O to CH4 varies from 1.1 to 1.3 and the conversion temperature varies from 1 223 to 1 273 K. The methane conversion rate is more than 95% when the molar ratio of H2O to CH4 is 1.2, the conversion temperature is above 1 223 K and the conversion time is longer than 0.75 s. Kinetic model of methane conversion was proposed. All results demonstrate that the calculated values by the kinetic model accord with the experimental data well, and the error is less than 1.5%.

Process Optimization of Coke Oven Gas to Methanol Based on the Downgrade of By-Product Steam

In the coke oven gas to methanol(CTM) process, boiling water(above 200 ℃) is generally used as the coolant in the methanol synthesis reactor, and thus, medium-pressure steam is generated as a by-product. In this paper, the influence of the coolant temperature on the CTM process is investigated from two aspects, which are the performance analyses of the reactor and the overall process and the energy integration of by-product steam. The results reveal that the coolant temperature plays a key role in the CTM process optimization. When the coolant temperature is reduced to 187 ℃, though low-pressure steam is generated, the techno-economic performance of the whole process is greatly improved: the energy/exergy efficiency is increased by 4-9%, energy cost is saved by 37.1%, income is increased by 5.4 M$/year, and the C02 emission is reduced by 21.3%.

Modeling the kinetics of methane conversion in steam reforming process of coke-oven gas based on experimental data

Steam-reforming is an effective approach for upgrading methane and hydrocarbon of coke-oven gas into CO and HE, but the kinetic behavior needs more study. We investigated the conversion of methane in coke-oven gas by steam reforming process in an electric tubular flow at 14 kPa with temperature varying from .500 ℃ to 9.50 ℃, and developed a kenetic model for, ignoring the effects of adsorption and diffusion. The optimal dynamic conditions for methane conversion 14 kPa are as follows： the ratio of the amount of water to the amount of methane is from 1.1 to 1.3; the reaction temperature is from 1 223 K to 1 273 K. The methane conversion rate is larger than 95% when the ratio of the amount of water to the amount of methane is 1.2 at a temperature above 1 223 K with the residence time up to 0.75 s.

On-site raw gas cut-off during the shut down of Baosteel phaseⅠcoke ovens

The preparation and implementation of raw coke oven gas cut-off, which was the key process involved with shutting down the Baosteel phase I coke ovens, were investigated, and the main technical points and countermeasures are presented.

Technical alternatives for coke oven gas utilization in China: A comparative analysis of environment-economic-strategic perspectives

China is the largest coke producer and consumer.There is a pressing need to address the high emissions of air pollutants and carbon dioxide associated with traditional coking production.As the nation pursues a transition towards carbon neutrality,expanding supply chains for coking plants to produce hydrogen,methanol,and other green alternatives has garnered significant attention.However,the relative advantages of these strategies have remained uncertain.In this study,we integrate a life cycle assessmenteconomic analysis-scenario analysis model to evaluate various coke oven gas(COG)utilization routes(COGtM:COG-to-methanol,COGtLNG:COG-to-liquefied natural gas,COGtSA:COG-to-synthetic ammonia,and COGtH:COG-to-hydrogen).The results indicate that COGtSA emerges as the preferred option for balancing environmental and economic benefits.Meanwhile,COGtM demonstrates economic viability but is associated with higher environmental impacts.Despite being recognized as a significant strategic direction under carbon neutrality initiatives,COGtH faces economic feasibility and risk resilience limitations.COGtLNG encounters both financial and environmental challenges,necessitating strategic development from an energy security perspective.The projected coking capacity is anticipated to experience a slight increase in the mid-term yet a significant decline in the long term,influenced by steel production capacity.In potential future markets,COGtM is estimated to potentially capture a maximum market share of 16e34%in the methanol market.Furthermore,against the backdrop of continuously expanding potential demand for hydrogen,COGtH holds advantages as a transitional solution,but in the long run,it can only meet a small portion of the market.COGtSA can meet 7e14%of market demand and emerges as the most viable pathway from the viewpoint of balancing environmental and economic aspects and covering future markets.

焦炉煤气脱碳法及甲烷化法制液化天然气的生命周期环境影响分析

作为焦化副产品,焦炉煤气富含氢气和甲烷,采用焦炉煤气制液化天然气(LNG)已成为当前焦炉煤气利用的主要途径之一。为系统评估焦炉煤气制LNG工艺的能源消耗和环境影响,尤其是碳排放,本文采用生命周期评价方法对脱碳法和甲烷化法两种焦炉煤气制LNG工艺进行系统评价。结果表明,无论采用哪种方法,LNG生产阶段均为焦炉煤气制LNG工艺生命周期环境负荷的控制阶段;在脱碳法工艺中,中压蒸汽是环境影响贡献的关键物质,可通过干熄焦回收红焦余热副产蒸汽补充LNG生产消耗来降低环境负荷;在甲烷化工艺中,电力为主要贡献物质,在碳排放中占比41.09%,若采用可再生能源电力(太阳能发电、风电、水电)替代后环境影响显著降低;相比于脱碳法,采用甲烷化工艺环境性能更优,主要源于甲烷增产优势。本文研究结果可从生命周期角度为焦化行业焦炉煤气的综合利用提供理论支持。

焦炉煤气制合成天然气(SNG)分析

焦炉煤气的利用途径主要包括作为燃料气直接利用、发电、合成甲醇、合成氨或尿素、制氢、合成天然气等,通过对焦炉煤气不同利用途径的技术和经济可行性分析,提出了焦炉煤气制合成天然气,配套建设焦炉煤气合成甲醇或LNG方案。焦炉煤气的统一合理利用,符合大力深化转型综改的政策要求,满足发展循环经济、提高资源综合利用率的要求。既能够填补天然气供应的缺口,又能够起到一定的储气调峰作用,在促进焦化行业健康发展的同时,还能带来一定的经济效益、环境效益和社会效益。

Distribution of reformed coke oven gas in a shaft furnace

In recent years, the reformed coke oven gas (COG) was proposed to be used as reducing gas in a shaft furnace. A mathematical model of gas flow based on the reformed COG was built. The effects of the pressure ratio of reducing gas to cooling gas (k) on the gas distribution in the shaft furnace were investigated. The calculation results show that k is an important operation parameter, which can obviously affect the gas distribution in the shaft furnace. The value of k should be compromised. Both too big and too small k values are not appropriate, and the most reasonable value for k is 1:1.33.Under this condition, the utilization coefficient of reducing gas, the utilization coefficient of cooling gas and the coefficient of upward gas are 0.94, 0.92 and 1.03, respectively. Based on the validation of physical experiments, the calculated values of the model agreed well with the physical experimental data. Thus, the established model can properly describe the reformed COG distribution in an actual shaft furnace.

Catalytic performance of Co-Mo-Ce-K/γ-Al_(2)O_(3) catalyst for the shift reaction of CO in coke oven gas

The catalytic performance of Co-Mo-Ce-K/γAl_(2)O_(3) catalyst for the shift reaction of CO in coke oven gas is investigated using X-ray diffraction(XRD)and temperature-programmed reduction(TPR).The results indicate that Ce and K have a synergistic effect on promoting the catalytic activity,and the Co-Mo-Ce-K/γAl_(2)O_(3) catalyst with 3.0 wt-%CeO2 and 6.0 wt-%K_(2)O exhibits the highest activity.CeO2 favors Co dispersion and mainly produces an electronic effect.TPR characterization results indicate that the addition of CeO2-K_(2)O in the Co-Mo-Ce-K/γ-Al_(2)O_(3) catalyst decreases the reduction temperature of active components,and part of octahedrally coordinated Mo6+transforms into tetrahedrally coordinated Mo6+,which has a close relationship with the catalytic activity.

Development and application of coke oven gas spraying on sinter bed

The Shanghai Meishan Iron and Steel Co., Ltd. has a large supply of coke oven gas (COG) and has the potential to develop and apply the spraying of COG on the surface of a sinter bed. The effects of the amount of COG, the spraying time, and the spraying distribution with the process on the quantity and quality indexes of sinter were investigated in the laboratory experi-ments. The results showed that the COG spraying can improve the sinter indexes to a large extent if appropriate parameters were used. It was found that an appropriate amount of COG, a relatively long spraying time, and a decreasing distribution of the COG amount with the spraying process all help to obtain a better performance for sinter quantity and quality indexes. When the COG spraying was applied to the No. 3 sintering machine, the sinter tumbler index increased by 0.45%, the overall finished product rate increased by 0.72%, the solid fuel consumption decreased by 4.06kg/t, the reducibility increased by 3.89%, and the cost of iron decreased by 5.29 CNY/t, and the CO2, SO2 and Nox emissions also decreased, thus proving the feasibility of this technology. Therefore, COG spraying provides a new way to improve sinter and also decrease the energy consumption and pollution.

Sensitivity analysis of a methanol and power polygeneration system fueled with coke oven gas and coal gas

The sensitivity analysis of a polygeneration energy system fueled with duo fuel of coke oven gas and coal gas is performed in the study,and the focus is put on the relations among syngas composition,conversation rate and performance.The impacts of the system configuration together with the fuel composition on the performance are investigated and discussed from the point of cascading utilization of fuel chemical energy.First,the main parameters affecting the performance are derived along with the analysis of the system configuration and the syngas composition.After the performance is being simulated by means of the Aspen Plus process simulator of version 11.1,the variation of the performance due to the composition of syngas and the conversion rate of chemical subsystem is obtained and discussed.It is obtained from the result that the proper conversion rate of the chemical subsystem according to the specific syngas composition results in better performance.And the syngas composition affects the optimal conversion rate of the chemical subsystem,the optimal point of which is around the stoichiometric composition for methanol production(CO/H_(2)=0.5).In all,the polygeneration system fueled with coke oven gas and coal gas,which can realize the reasonable conversion of syngas to power and chemical product according to the syngas composition,is a promising method for coal energy conversion and utilization.