期刊文献+
共找到1,635篇文章
< 1 2 82 >
每页显示 20 50 100
Design,fabrication,and cold test of an S-band high-gradient accelerating structure for compact proton therapy facility 被引量:4
1
作者 Yu Zhang Wen-Cheng Fang +4 位作者 Xiao-Xia Huang Jian-Hao Tan Cheng Wang Chao-Peng Wang Zhen-Tang Zhao 《Nuclear Science and Techniques》 SCIE EI CAS CSCD 2021年第4期38-48,共11页
An S-band high-gradient accelerating structure is designed for a proton therapy linear accelerator(linac)to accommodate the new development of compact,singleroom facilities and ultra-high dose rate(FLASH)radiotherapy.... An S-band high-gradient accelerating structure is designed for a proton therapy linear accelerator(linac)to accommodate the new development of compact,singleroom facilities and ultra-high dose rate(FLASH)radiotherapy.To optimize the design,an efficient optimization scheme is applied to improve the simulation efficiency.An S-band accelerating structure with 2856 MHz is designed with a low beta of 0.38,which is a difficult structure to achieve for a linac accelerating proton particles from 70 to 250 MeV,as a high gradient up to 50 MV/m is required.A special design involving a dual-feed coupler eliminates the dipole field effect.This paper presents all the details pertaining to the design,fabrication,and cold test results of the S-band high-gradient accelerating structure. 展开更多
关键词 S-BAND High gradient Accelerating structure COMPACT Single-room facility Dual-feed coupler cold test
下载PDF
Oblique Y-groove cracking test of the welding cold cracking susceptibility of domestic X-70 pipeline steel 被引量:3
2
作者 陈丽萍 杜则裕 +1 位作者 李云涛 李九生 《China Welding》 EI CAS 2002年第2期100-103,共4页
Gas Transmitting From West to East Project' is significant. It should ensure the welding quality and safety of pipeline. The task is very arduous to guarantee the quality of the project in the condition of long li... Gas Transmitting From West to East Project' is significant. It should ensure the welding quality and safety of pipeline. The task is very arduous to guarantee the quality of the project in the condition of long line, complex weather and geology features. In this paper, the welding cold cracking susceptibility of domestic X 70 pipeline steel adopted by the project, which is one of the most interesting questions of welding quality about petrol pipeline, was studied by means of oblique Y groove cracking test. The crack ratio of surface and section was tested under the conditions of different welding materials and preheat temperature .The thickness of plate steel was 14.7 mm and 10.3 mm . The results reveal that X 70 pipeline steel has good crack resistance. The research has important value for the construction of large scale pipeline engineering and the application of domestic X 70 pipeline steel. 展开更多
关键词 X 70 pipeline steel cold cracking susceptibility oblique Y groove cracking test
下载PDF
Cold Model Study and Commercial Test on Novel Vapor-Liquid Distributor of Hydroprocessing Reactor 被引量:3
3
作者 Wang Shaobing Zhang Zhanzhu +1 位作者 Wu Defei Guo Qingming 《China Petroleum Processing & Petrochemical Technology》 SCIE CAS 2007年第2期49-54,共6页
一个新奇蒸汽液体经销商在在处理反应堆的水疗院使用的存在经销商上根据足够的学习被开发。冷模型测试数据证明新奇蒸汽液体分发者的液体分发表演比传统的显然好。新分发者的商业测试在在西诺佩克·昌灵·布朗奇同伴对待反应堆... 一个新奇蒸汽液体经销商在在处理反应堆的水疗院使用的存在经销商上根据足够的学习被开发。冷模型测试数据证明新奇蒸汽液体分发者的液体分发表演比传统的显然好。新分发者的商业测试在在西诺佩克·昌灵·布朗奇同伴对待反应堆的 300kt/a 气体油水疗院被执行,证明 newvapor 液体分发者能改进液体分发,支持对待效率的水疗院并且导致比传统的更好的性能。 展开更多
关键词 加氢处理 蒸汽液体分配器 冷模型 生产技术
下载PDF
Design optimization and cold RF test of a 2.6-cell cryogenic RF gun 被引量:2
4
作者 Cheng Wang Jian-Hao Tan +4 位作者 Xiao-Xia Huang Yi-Xing Lu Lin Wang Wen-Cheng Fang Zhen-Tang Zhao 《Nuclear Science and Techniques》 SCIE EI CAS CSCD 2021年第9期84-93,共10页
To further improve the performance of acceler-ators,the first cryogenic normal-conducting RF gun in China was designed and manufactured.As a new and attractive trend,this optimized cryogenic RF gun can generate a low-... To further improve the performance of acceler-ators,the first cryogenic normal-conducting RF gun in China was designed and manufactured.As a new and attractive trend,this optimized cryogenic RF gun can generate a low-emittance beam with a short-driven laser pulse because of its promising high gradient on the cath-ode.In this paper,optimization of the RF design and beam dynamics,including suppression of the peak RF field and elimination of the multipole mode,is presented.In addi-tion,the emittance growth caused by the alignment devi-ation and RF jitter is discussed.After the gun was manufactured,a cold test was conducted at both room temperature and cryogenic conditions.At room tempera-ture,the field distribution was obtained by the bead pull method.Under cryogenic conditions,the RF properties,such as the coupling coefficient and quality factor,varied with temperature.The test results agreed with the design.In the cryogenic test,vibration measurements were performed.Without vibration isolation,a maximum vibration of 50 lm was observed.These cold test results are the basis of the following high-power test. 展开更多
关键词 PHOTOINJECTOR Cryogenic structure C-BAND cold test
下载PDF
冷弯型钢“框-墙”复合结构墙体上下层间受力性能研究
5
作者 王蕴哲 周天华 +3 位作者 吴函恒 隋璐 王继琴 王帅兵 《建筑科学与工程学报》 CAS 北大核心 2024年第4期31-41,共11页
提出了一种新型的冷弯型钢“框-墙”复合结构墙体,并对2片不同层数的足尺墙体试件进行了拟静力试验。依据破坏形态、滞回曲线、骨架曲线、位移延性系数等性能指标,与单层墙体对比,重点考察双层墙体上下层间的受力性能。此外,基于ABAQUS... 提出了一种新型的冷弯型钢“框-墙”复合结构墙体,并对2片不同层数的足尺墙体试件进行了拟静力试验。依据破坏形态、滞回曲线、骨架曲线、位移延性系数等性能指标,与单层墙体对比,重点考察双层墙体上下层间的受力性能。此外,基于ABAQUS有限元分析软件对双层墙体的滞回性能进行模拟,并对层间连接部位的层间边框梁屈服强度、层间抗拔螺栓间距和高宽比进行参数分析。结果表明:试验全程双层墙体上下层间螺栓连接无明显滑移与拔起,具有半刚性特征,且根据位移计实测结果,墙体上下层间位移趋近于0;在考虑了上下层间连接部位后,双层墙体的位移延性系数和峰值荷载较单层墙体分别降低了1.84%和8.33%,说明冷弯型钢“框-墙”复合结构墙体上下层间传力、连接性较好;层间边框梁屈服强度和层间抗拔螺栓间距对墙体的抗剪承载力和抗侧刚度影响较小,而高宽比对双层墙体的抗侧刚度和抗剪承载力影响较大;研究成果可为该类墙体应用于多层冷弯型钢房屋住宅提供参考。 展开更多
关键词 冷弯型钢组合墙体 双层墙体 拟静力试验 层间受力性能 数值分析
下载PDF
Acute paroxysmal cold hemoglobinuria upon dengue fever:A case report
6
作者 Momin Majed Abdul Basit Aluri Anamika +1 位作者 Syed Arfa Ashrafunnisa Rahul Dev Singh Rathore 《Journal of Acute Disease》 2024年第3期121-124,共4页
Rationale:Dengue fever is capable of inciting the formation of transient polyclonal antibodies directed at red blood cell antigens,resulting in complement-mediated hemolysis,leading to intravascular hemolysis and hemo... Rationale:Dengue fever is capable of inciting the formation of transient polyclonal antibodies directed at red blood cell antigens,resulting in complement-mediated hemolysis,leading to intravascular hemolysis and hemoglobinuria.Patient’s concern:A 12-year-old male patient who recovered from dengue fever a week ago had red blood cell agglutination,spherocytes,and engulfment of red blood cells(erythrophagocytosis)by monocytes and neutrophils on routine hematological peripheral blood smear.The unexpected blood smear results prompted the lab physicians to investigate autoimmune hemolytic anemia,which revealed a monospecific positive direct antiglobulin test for complement(C3d,C3b)and the presence of Donath-Landsteiner antibody.Diagnosis:Paroxysmal cold hemoglobinuria(PCH),secondary to dengue fever.Interventions:Oxygen supplements,antibiotics,intravenous immunoglobulins,steroid therapy,and packed cell transfusions were administered.Outcomes:The patient’s condition was improved following the therapy.Lessons:Post-dengue PCH is a rare complication that requires a thorough peripheral smear examination for erythrophagocytosis,as advanced hematology analyzers fail to detect such findings. 展开更多
关键词 Paroxysmal cold hemoglobinuria DENGUE Erythrophagocytosis Donath-Landsteiner test Treatment
下载PDF
The Theoretically Studies and Field Testing of Self-Insulation Exterior Wall in the Hot Summer and Cold Winter Zone
7
作者 Huifang Yu Quanbiao Xu +2 位作者 Sanming Zhang Weijun Gao Jianfeng Xu 《Energy and Power Engineering》 2017年第10期654-686,共33页
The energy efficiency design of the exterior wall in the buildings of the hot summer and cold winter zone of China should consider the heat prevention in summer and the heat insulation in winter. The self-insulation o... The energy efficiency design of the exterior wall in the buildings of the hot summer and cold winter zone of China should consider the heat prevention in summer and the heat insulation in winter. The self-insulation of the exterior?wall is a more feasible design to satisfy the energy efficiency of buildings in the?zone. However, the systematic research is urgently needed for the self-insulation of the exterior wall in the hot summer and cold winter zone of China. The paper tested the thermal performance of the common non-clay materials such as shale sintered hollow brick, sand autoclaved aerated concrete block, etc. by means of indoor experiments. The energy efficiency effect of the common materials was verified using dynamic calculation soft PKPM and several constitutions of exterior wall with different main bricks and insulation materials on the heat bridge were simulated, too. Besides, the tests of the thermal performance of exterior wall in real constructions were carried out to testify the practical effect of the recommended constitutions of exterior wall with different main bricks and insulation materials on the heat bridge. The conclusions are: the physical and thermal properties of the six non-clay wall material are better than the clay porous brick;the thermal performance of the non-clay brick can be improved obviously through the rational arrangement of the holes;shale sintered hollow brick after increasing the holes and rationalizing the hole arrangement and sand autoclaved aerated concrete block are recommended for buildings in the hot summer and cold winter area of China. The dynamic calculation results show that the thermal performances?of the non-clay materials are all satisfied with the energy efficiency;The heat transfer coefficient of the exterior wall with composition?③,?in which?the main wall was sand autoclaved aerated concrete block and the material on the heat bridge was sand autoclaved aerated concrete plate, is the smallest among the three recommended compositions. 展开更多
关键词 SELF-INSULATION EXTERIOR Wall INDOOR Experiments Dynamic Simulation Field testing Hot SUMMER and cold WINTER ZONE
下载PDF
Resistance and Reactance of Monopole Fields Induced by a Test Charge Drifting Off-Axis in a Cold and Collisional Cylindrical Plasma
8
作者 M.S.Bawa'aneh A.M.Al-Khateeb Y.-c.Ghim 《Chinese Physics Letters》 SCIE CAS CSCD 2018年第8期49-53,共5页
We study the interaction of a uniform, cold and collisional plasma with a test charged particle moving off-axis at a constant speed down a cylindrical tube with a resistive thick metallic wall. Upon matching the elect... We study the interaction of a uniform, cold and collisional plasma with a test charged particle moving off-axis at a constant speed down a cylindrical tube with a resistive thick metallic wall. Upon matching the electromagnetic field components at all interfaces, the induced monopole electromagnetic fields in the plasma are obtained in the frequency domain. An expression for the plasma electric resistance and reactance is derived and analyzed numerically for some representative parameters. Near the plasma resonant frequency, the plasma resistance evolves with frequency like a parallel RLC resonator with peak resistance at the plasma frequency pe, while the plasma reactance can be capacitive or inductive in nature depending on the frequency under consideration. 展开更多
关键词 In Resistance and Reactance of Monopole Fields Induced by a test Charge Drifting Off-Axis in a cold and Collisional Cylindrical Plasma
下载PDF
以缩微技术实现电子数据的长期存档——GB/T 30540-2014《文件管理应用 电子数据的存档计算机输出缩微品(COM)/计算机输出激光光盘(COLD)》介绍 被引量:2
9
作者 李铭 《数字与缩微影像》 2017年第1期29-31,共3页
介绍国家标准GB/T 30540-2014《文件管理应用电子数据的存档计算机输出缩微品(COM)/计算机输出激光光盘(COLD)》的主要内容,说明在当前技术水平下,电子数据需要借助缩微技术来实现长期存档,以及用缩微技术对电子数据进行长期存档的规范。
关键词 计算机输出缩微品 计算机输出激光光盘 电子数据 长期存档 COM cold GB/T 30540-2014
下载PDF
以缩微技术实现电子数据的长期存档——GB/T 30540-2014《文件管理应用电子数据的存档 计算机输出缩微品(COM)/计算机输出激光光盘(COLD)》介绍(续前)
10
作者 李铭 《数字与缩微影像》 2017年第3期23-26,共4页
介绍了国家标准GB/T 30540-2014《文件管理应用电子数据的存档计算机输出缩微品(COM)/计算机输出激光光盘(COLD)》的主要内容,说明了在当前的技术水平下,电子数据需要借助缩微技术来实现长期存档,以及用缩微技术对电子数据进行长期的存... 介绍了国家标准GB/T 30540-2014《文件管理应用电子数据的存档计算机输出缩微品(COM)/计算机输出激光光盘(COLD)》的主要内容,说明了在当前的技术水平下,电子数据需要借助缩微技术来实现长期存档,以及用缩微技术对电子数据进行长期的存档的规范。 展开更多
关键词 计算机输出缩微品 计算机输出激光光盘 电子数据 长期存档 COM cold GB/T 30540-2014
下载PDF
LDRA TestBed在CTCS2-200C扩展单元软件测试中的应用 被引量:1
11
作者 周永健 范明 +1 位作者 张淼 赵东旭 《机车电传动》 北大核心 2016年第5期102-106,共5页
介绍了LDRA Test Bed软件测试工具和CTCS2-200C扩展单元,以CTCS2-200C为例,通过对软件进行静态和动态测试,参照EN 50128:2011标准,提高了整个软件开发生命周期中的各项验证和确认活动效率,降低了软件的风险。
关键词 软件测试 test BED EN 50128 CTCS2-200C扩展单元 列控车载系统
下载PDF
Pulsed Eddy Current Non-destructive Testing and Evaluation:A Review 被引量:29
12
作者 Ali Sophian Guiyun Tian Mengbao Fan 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2017年第3期500-514,共15页
Pulsed eddy current (PEC) non-destructive test- ing and evaluation (NDT&E) has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed th... Pulsed eddy current (PEC) non-destructive test- ing and evaluation (NDT&E) has been around for some time and it is still attracting extensive attention from researchers around the globe, which can be witnessed through the reports reviewed in this paper. Thanks to its richness of spectral components, various applications of this technique have been proposed and reported in the lit- erature covering both structural integrity inspection and material characterization in various industrial sectors. To support its development and for better understanding of the phenomena around the transient induced eddy currents, attempts for its modelling both analytically and numeri- cally have been made by researchers around the world. This review is an attempt to capture the state-of-the-art development and applications of PEC, especially in the last 15 years and it is not intended to be exhaustive. Future challenges and opportunities for PEC NDT&E are also presented. 展开更多
关键词 Non-destructive testing - Pulsed eddy currentsMaterial characterization Structural integrity Non-destructive evaluation
下载PDF
The 0-1 test algorithm for chaos and its applications 被引量:5
13
作者 孙克辉 刘璇 朱从旭 《Chinese Physics B》 SCIE EI CAS CSCD 2010年第11期200-206,共7页
To determine whether a given deterministic nonlinear dynamic system is chaotic or periodic, a novel test approach named zero-one (0-1) test has been proposed recently. In this approach, the regular and chaotic motio... To determine whether a given deterministic nonlinear dynamic system is chaotic or periodic, a novel test approach named zero-one (0-1) test has been proposed recently. In this approach, the regular and chaotic motions can be decided by calculating the parameter K approaching asymptotically to zero or one. In this study, we focus on the 0-1 test algorithm and illustrate the selection of parameters of this algorithm by numerical experiments. To validate the reliability and the universality of this algorithm, it is applied to typical nonlinear dynamic systems, including fractional-order dynamic system. 展开更多
关键词 CHAOS 0-1 test fractional-order system Lyapunov exponent
下载PDF
Model test study of frost heaving pressures in tunnels excavated in fractured rock mass in cold regions 被引量:2
14
作者 Bing Sun 《Research in Cold and Arid Regions》 2010年第5期405-410,共6页
Based on the similarity theory, taking the horseshoe, city-gate and round linings as examples, the value and distribution regularities of normal frost heaving pressures (hereinafter as frost heaving pressures) in tu... Based on the similarity theory, taking the horseshoe, city-gate and round linings as examples, the value and distribution regularities of normal frost heaving pressures (hereinafter as frost heaving pressures) in tunnels excavated in fractured rock mass in cold regions under different constraints and freezing depths were studied by a test model. It was found that the larger the frozen depth, the larger the frost heaving pressure, and the stronger the top constraint, the larger the frost heaving pressure. For the horseshoe lining and city-gate lining, the top constraint has a greater effect on the frost heaving pressures on the arch and the inverted arch. For the round lining, the influences of the top constraint on the frost heaving pressure in all linings are almost the same. The frost heaving pressure is maximum on the city-gate lining and minimal on the round lining. The largest frost heaving pressure all occur near the foot of the inverted arch for the three kinds of lining. Thus, the test data basically coincide with the observed in situ data. 展开更多
关键词 tunnel in cold region fractured rock mass frost heaving pressure model test
下载PDF
The Popularization and Application of Cold Storage Red Blood Cells or Whole Blood at -80 ℃ of the Rh(D) Negative Patients in Surgical Operation 被引量:3
15
作者 YU Zhongqing(余忠清) +7 位作者 HU Lihua(胡丽华) Han Min(韩敏) RAO Shenzong(饶神宗) LUO Chengwei(罗成伟) 《Journal of Huazhong University of Science and Technology(Medical Sciences)》 SCIE CAS 2002年第2期155-157,共3页
Summary: The efficiency of cold storage red blood cells (CSRBC) or whole blood at -80 ℃ used in 27 Rh(D) negative patients during surgical operation was reported. The Rh(D) negative patients received the transfusion... Summary: The efficiency of cold storage red blood cells (CSRBC) or whole blood at -80 ℃ used in 27 Rh(D) negative patients during surgical operation was reported. The Rh(D) negative patients received the transfusion of CSRBC or whole blood stored at -80 ℃ for 180 to 360 days. The changes in the indexes, such as blood TB, DB, K +, Na +, BUN, Cr, urine protein (URPO), UOB, Hb, HCT, serum total protein, relative to hemolytic reaction and blood volume before and after transfusion were observed. The results showed that after transfusion of CSRBC or whole blood 27 cases were negative for urine protein and UOB, and the levels of BUN and Cr were normal (P>0.05). Blood TB, DB, Hb, and HCT were increased, while pH, blood K + and blood Na + was normal with the difference being not significant before and after operation (P>0.05). Plasma protein was decreased, but there was no significant difference before and after operation (P>0.05). It was suggested that CSRBC or whole blood at -80 ℃ could be safely infused to the Rh(D) negative patients without side effects during the surgical operation. 展开更多
关键词 Rh(D) negative patient -80 cold storage red blood cells surgical operation hemolytic reaction
下载PDF
Study on Possible Mechanism of Terrain Influence on Cold-flow Snowstorm 被引量:2
16
作者 ZHOU Xue-song YANG Cheng-fang ZHANG Shao-lin 《Meteorological and Environmental Research》 CAS 2011年第8期48-51,85,共5页
[Objective] The research aimed to study the possible mechanism of terrain effect on cold-flow snowstorm.[Method] By using the meso-scale numerical model(WRF),a cold-flow snowstorm weather process in Shandong Peninsula... [Objective] The research aimed to study the possible mechanism of terrain effect on cold-flow snowstorm.[Method] By using the meso-scale numerical model(WRF),a cold-flow snowstorm weather process in Shandong Peninsula was carried out numerical simulation and terrain sensitivity contrast test.The possible reason of terrain effect on falling zone and strength of snowstorm was deeply analyzed from water vapor,thermodynamic field and so on.[Result] The mountain terrain in Shandong Peninsula had great influences on falling zone and strength of cold-flow snowstorm.The strength of snowstorm obviously increased,and the snowfall center obviously moved northward.The main reason was that terrain caused the low-level wind field convergence and vertical movement in the troposphere strengthened.Then,the spatial distribution of water vapor and snow water content in the cold-flow snowstorm process obviously changed.So,the whole snowstorm process was affected.[Conclusion] The mountain terrain in Shandong Peninsula was the important element which needed to be focused on considering in the forecast analysis of cold-flow snowstorm weather process. 展开更多
关键词 cold-flow snowstorm Mountain terrain Numerical sensitivity test Influence mechanism China
下载PDF
Key Problems of Cold Power Spinning of Ti-15-3 Alloy 被引量:1
17
作者 Debin SHAN Yan LU and Ping LI School of Materials Science and Engineering, Harbin institute of Thchnology, Harbin 150001, China Yi XU Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110015, China 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2001年第1期125-126,共2页
The key problems of cold power spinning of Ti-15-3 alloy are studied. Reasonable billet preparation methods are presented to improve crystal structure and avoid crack of billet. Influences of original wall thickness,... The key problems of cold power spinning of Ti-15-3 alloy are studied. Reasonable billet preparation methods are presented to improve crystal structure and avoid crack of billet. Influences of original wall thickness, reduction rate and feed rate on expanding in diameter are analyzed and some methods to prevent expanding in diameter are given. 展开更多
关键词 TI Key Problems of cold Power Spinning of Ti-15-3 Alloy
下载PDF
Some Advances in the Application of Weathering and Cold-Formed Steel in Transmission Tower 被引量:2
18
作者 Fengli Yang Junke Han +1 位作者 Jingbo Yang Zheng Li 《Journal of Electromagnetic Analysis and Applications》 2009年第1期24-30,共7页
Application of weathering and cold-formed steel in transmission lines can reduce steel consumption and environmental pollution. Some advances in the studies on the weathering and cold-formed steel in transmission towe... Application of weathering and cold-formed steel in transmission lines can reduce steel consumption and environmental pollution. Some advances in the studies on the weathering and cold-formed steel in transmission tower are introduced. Firstly, corrosion-resistant tests of weathering steel samples under different simulating technical atmospheres were carried out separately for 240 hours. It shows that the corrosion degree of joint samples is higher than that of single chip samples, and the corrosion-resistant performance of weathering steel is superior to common carbon steel. The corrosion-resistance of weathering steel meets with the requirement of transmission tower. Secondly, experiments and finite element analysis for cold-formed angles and a 220kV prototype tower were completed, and the stability coeffi-cient fitting curves as well as the modification formulas of slenderness ratio for cold-formed members were determined. According to the structural characteristics of transmission towers, four sections of cold-formed angles with different sections and slenderness ratios were selected in this study. The finite element model well predicted the buckling behav-iour of the cold-formed members. Ultimate loads calculating by the fitting curve were well agreed to the experimental values, especially for the members with small slenderness ratios. Weight of the cold-formed steel tower can be reduced by more than 5 percent after considering the strength enhancement. Cost of the weathering and cold-formed steel transmission tower is nearly equivalent to that of hot-rolled steel tower with hot galvanizing. 展开更多
关键词 WEATHERING STEEL cold-FORMED STEEL BOLTED Joint Corrosion-Resistant test Prototype test Buckling Analysis Transmission TOWER
下载PDF
A Review of the Methods of Identifying and Testing Plant Cold Resistance
19
作者 Xu Chengxiang 《Plant Diseases and Pests》 CAS 2015年第4期38-43,共6页
Low-tempemture stress is a major abiotic stress influencing plant growth, economic yield and quality worldwide. Precise and reliable identification and test of plant cold resistance is a foundation for exploring low-t... Low-tempemture stress is a major abiotic stress influencing plant growth, economic yield and quality worldwide. Precise and reliable identification and test of plant cold resistance is a foundation for exploring low-temperature damages, cold resistance mechanism of plants, cultivating and innovating quality cold-re- sistant germplasm resources, which is rather important for woody plants because their perennial and large-sized characteristics. Generally, most researches on plant cold-resistant physiology focused on identification and utilization of cold resistance worldwide, and a few on test methods of cold resistance, but cold resistance mechanism has been less reported. Therefore, researches on methods of identifying and testing plant resistance have achieved considerable progress, accumulated much experience and formed characteristics gradually in terms of methodology. Current methods of identifying plant cold resistance include open field/outdoor culti- vation evaluation, cold and frost damage investigation, simulated cold weather, and mathematical model forecast. And the methods of testing plant cold resistance include growth condition test, frozen index investigation, electrolyte leakage, bioelectrical impedance mapping and so on. Synthesizing the methods of identifying and testing plant cold resistance should be a key matter in the present and future researches and application of plant cold resistance physiology, improvement and in- novation of the identification and test will be an important direction of the future researches. Identification and test of plant cold resistance based on genomies, meta- bonomics and proteomics should be the new trend of the researches on physiology and ecology of plant cold resistance. 展开更多
关键词 PLANT cold resistance Identification and test Methods and technology PROSPECT
下载PDF
基于Test Method 1311法重结晶α-半水石膏重金属元素的浸出特性研究 被引量:1
20
作者 余智 吴晓琴 +1 位作者 许勇 叶智 《安全与环境工程》 CAS 2017年第5期94-99,共6页
以脱硫石膏及其常压盐溶液法重结晶得到的α-半水石膏为研究对象,采用改进的Tessier流程和Test Method 1311法研究两种石膏晶体重金属元素的赋存形态和浸出特性,并对其进行环境效应评价。结果表明:重结晶过程能够释放脱硫石膏中的重金... 以脱硫石膏及其常压盐溶液法重结晶得到的α-半水石膏为研究对象,采用改进的Tessier流程和Test Method 1311法研究两种石膏晶体重金属元素的赋存形态和浸出特性,并对其进行环境效应评价。结果表明:重结晶过程能够释放脱硫石膏中的重金属元素并使其赋存形态改变;重结晶后石膏晶体中的重金属组分短期内可达到释放平衡,其中Cr、Pb、Ni元素的最大浸出量明显低于对应的脱硫石膏,As元素的浸出量几乎不变;α-半水石膏的环境友好性优于脱硫石膏,但仍具有污染环境的潜在风险。 展开更多
关键词 脱硫石膏 Α-半水石膏 重结晶 test Method 1311法 重金属元素 赋存形态 浸出特性
下载PDF
上一页 1 2 82 下一页 到第
使用帮助 返回顶部