Cold Flow Experiments and Acoustic Investigation on Pressure Oscillation Induced by Flow Instability

Pressure oscillation in solid rocket motor is believed to be the results of the interaction between the flow instability and the acoustics of combustion chamber.Several reasonable and necessary hypothesizes are given to establish an equation to describe this coupling.A cold flow motor called CVS60D(corner vortex shedding 60°)was designed to study the flow-acoustic coupling based on theoretical analysis.Experimental investigations were carried out to determine the acoustics of CVS60D.Corner vortex shedding is generated at the backward facing step which is designed similar to the geometry of the motor with finocyl propellant after the burnout of its fins.A pintle was used to modify the velocity in the duct to change the frequency of vortex shedding.It is found that large amplitude pressure oscillation occurs when the pintle moves to a range of specific position,which indicates that the frequency of vortex shedding is close to one order of acoustic modes of combustion chamber.The amplitude of pressure oscillation changes as the pintle moves.

Study of a ceramic burner for shaftless stoves

A multi-burner-port annular flameless ceramic burner （MAFCB） of the shaftless stove for blast furnaces was designed. The characteristics of pressure drop, homogeneousness of the flows at burner ports, and distribution of the flows in the chambers and joint were studied by cold model experiments. This type of ceramic burner was successfully applied in 6# blast furnace at Liuzhou Iron ＆ Steel Co. Ltd. （LISC） and this practice proved that it could be used in the hot blast stove and other stoves with a higher efficiency and a higher steadiness of hot blast temperature at 1200℃. With the combustion of blast furnace gas alone, the thermal efficiency was up to 78.95%, saving energy remarkably.

Flow zone distribution and mixing time in a Peirce-Smith copper converter

Peirce-Smith copper converting involves complex multiphase flow and mixing.In this work,the flow zone distribution and mixing time in a Peirce-Smith copper converter were investigated in a 1:5 scaled cold model.Flow field distribution,including dead,splashing,and strong-loop zones,were measured,and a dimensionless equation was established to determine the correlation of the effects of stirring and mixing energy with an error of<5%.Four positions in the bath,namely,injection,splashing,strong-loop,and dead zones,were selected to add a hollow salt powder tracer and measure the mixing time.Injecting a quartz flux through tuyeres or into the backflow point of the splashing wave through a chute was recommended instead of adding it through a crane hopper from the top of the furnace to improve the slag-making reaction.

NUMERICAL EXPERIMENT WITH PROCESSES FOR EFFECT OF AUSTRALIAN COLD AIR ACTIVITY ON EAST-ASIAN SUMMER MONSOON

Based on diagnostic results,a numerical study is made of the processes of Australian cold air activity affecting East Asian summer monsoon by using Kuo-Qian P-σ incorporated coordinate five-layer primitive equation spherical band model.Analysis is done of the response to the Southern Hemisphere circulation with and without cold air activity in Australia of the flow,rainfall and diabatic heating fields in the monsoon area of Asia,especially,East Asia,with special attention to the intensification and northward march of the monsoon due to the activity.It is found that the processes for the effect transmission are very analogous to the meridional propagation of quasi-40-day oscillation,together with the meridional wind disturbance showing south-north travel and the flow/rainfall fields exhibitirg corresponding movement in this direction,only with a 12-day lag.