An oxygenating colloidal bioink for the engineering of biomimetic tissue constructs

Ensuring a sufficient oxygen supply is pivotal for the success of bioprinting applications since it fosters tissue integration and natural regeneration.Variation in oxygen concentration among diverse tissues necessitates the precise recreation of tissue-specific oxygen levels in imprinted constructs to support the survival of targeted cells.Although oxygen-releasing biomaterials,such as oxygen-generating microparticles(OMPs),have shown promise for enhancing the oxygen supply of microenvironments in injured tissues,whether this approach is scalable for large tissues and whether tissue-specific bioinks with varying OMP concentrations remain printable remain unknown.This study addresses this critical gap by introducing an innovative class of engineered oxygenated bioinks that combine colloidal-based microgels with OMPs.We report that incorporating nanosized calcium peroxide(nCaO_(2))and manganese oxide nanosheets(nMnO_(2))into hydrophobic polymeric microparticles enables precise modulation of oxygen release while controlling hydrogen peroxide release.Moreover,the fabrication of oxygenating and cytocompatible colloidal gels is achieved using an aqueous two-phase system.This study thoroughly evaluates the fundamental characteristics of the resulting bioink,including its rheological behaviors,printability,shape fidelity,mechanical properties,and oxygen release properties.Moreover,this study demonstrates the macroscopic scalability and cytocompatibility of printed constructs produced via cell-laden oxygenating colloidal bioinks.By showcasing the effectiveness of extrusion-based bioprinting,this study underscores how it can be used to fabricate biomimetic tissues,indicating its potential for new applications.The findings presented here advance the bioprinting field by achieving scalability with both high cell viability and the possibility of mimicking specifically oxygenated tissues.This work thereby offers a promising avenue for the development of functional tissues with enhanced physiological relevance.

Photostability of colloidal single photon emitter in near-infrared regime at room temperature

The photostability of a colloidal single photon emitter in near-infrared regime at room temperature is investigated.The fluorescence lifetime,blinking phenomenon,and anti-bunching effect of a single CdTeSe/ZnS quantum dot with an emission wavelength of 800 nm at room temperature are studied.The second-order correlation function at zero delay time is much smaller than 0.1,which proves that the emission from single quantum dots at 800 nm is a highly pure single-photon source.The effects of the irradiation duration on the fluorescence from single quantum dots are analyzed.The experimental results can be explained by a recombination model including a multi-nonradiative recombination center model and a multi-charged model.

Determination of the Structure of Polyacrylamide/Aluminum Citrate Colloidal Dispersion Gel System

1 INTRODUCTIONIn recent years,colloidal dispersion gel(CDG)have been attracting more and more in thefield of enhanced oil recovery on account of the cost-effectiveness and high efficiency ofblocking formation.Compared with bulk gel(BG),CDG exhibits lower polymer concentra-tion,undefined shape and selective blocking formation characteristics.The characteris-tics of CDG and BG are related to structure.In the bulk gel a continuous network of polymermolecules is formed predominant through intermolecular cross-linkages.The

Evolution of fracture permeability due to co-colloidal bacterial transport in a coupled fracture-skin-matrix system

A numerical model is developed for investigating the evolution of fracture permeability in a coupled fracture-matrix system in the presence of fracture-skin with simultaneous colloidal and bacte- rial transport, by taking into account the effects of thermal stress and silica precipitation/dissolution, which is computed using linear reaction kinetics. The non-linear coupled equations are numerically modeled using the fully implicit finite difference method and a constant continuous source is adopted while modeling thermal, contaminant, colloidal and bacterial transport. Due to co-colloid bacterial trans- port under non-isothermal conditions, in a coupled fracture-skin-matrix system, the fracture apertures vary spatially, with a corresponding pressure variation for a constant discharge. A series of numerical experiments were conducted for analyzing the spatial variation of fracture aperture in response to the combined effects of thermal stress, silica precipitation/dissolution, and simultaneous colloidal and bacte- rial transport in the presence of the fracture-skin. The simulation results suggest that temperature and contaminant concentration of the mobile fluid within the fracture increases with reduction in initial frac- ture aperture. The pattern of variation followed by the fracture aperture is nearly the same in the presence and absence of bacterial transport but the magnitude of the fracture aperture is low under the influence of bacterial transport. The variation in the fracture aperture resulting from precipitation-dissolution and thermoelastic stress is significant when the fracture aperture is very low and reduces with increment in fracture aperture. The variation in fracture aperture and pressure remains the same for both undersaturated and supersaturated fluid entering the fracture due to the influence of bacterial transport at the inlet of the fracture.

Effect of pH on rheology of aqueous Al_(2)O_(3)/SiC colloidal system

The rheological behavior of aqueous Al_(2)O_(3)/SiC suspensions at different pH values was investigated by rheological measurement.Experimental results showed that at pH=3-6,Al_(2)O_(3) and SiC particles have opposite surface charges,and the binary suspensions have lower viscosity than the unary suspensions at shear rates of 0-300 s^(-1).Furthermore,at pH=3-12,the stability of the Al_(2)O_(3) component seemed to dominate the overall rheological behavior of the Al_(2)O_(3)/SiC binary suspensions.The tendency mentioned above showed little variations in various ionic strengths,particle diameters and component fractions.

Colloidal gas aphron(CGA) based foam cement system

To solve the problems such as high denstiy,foam instability,low compressive strength,high porosity and poor durability associated with conventional foam cements,a novel colloidal gas aphron(CGA)based foam cement system was investigated and tested for properties.CGA is used in a base slurry as the foam component and the recipe was optimized with hollow sphere and micro-silica in terms of particle size distribution(PSD).Porosity,permeability,strength,brittleness,elasticity,free water content,foam stability and density tests on the CGA based foam cement system were carried out to evaluate the performance of the system.According to the experiment results,at the foam proportion of 10%,the cement density was reduced to 1040 kg/m3,and stable microfoam net structure not significantly affected by high temperature and high pressure was formed in the cement system.The optimal CGA based foam cement has a free water content of 0%,porosity of 24%,permeability of 0.7×10-3μm2,low elasticity modulus,high Poisson’s ratio,and reasonable compressive strength,and is more elastic and flexible with capability to tolerate regional stresses.

Colloidal Gold Immunochromatographic Assay for Rapid On-Site Detection of Tetracycline in Seawater

Recently increasing concerns from the scientists and public have been paid for seawater pollution due to tetracycline(TC)overuse in maricultural area.However,there are few methods or instruments that can be used for specific and rapid detection of this antibiotic in seawater.In this study,the colloidal gold immunochromatographic assay(CG-ICA)was used to achieve this goal.A commercialized monoclonal antibody against TC(anti-TC mAb)was selected because of its higher sensitivity(half-maximal inhibitory concentration of 2.38μgL^(-1)).The prepared CG particles(average diameter of 20 nm)were used to label anti-TC mAb at pH 8.0.The conjugate pad was formed by spraying the CG-labeled anti-TC mAb on a glass fibre membrane followed by proper dryness.The test pad was made by immobilizing artificial antigen and anti-mouse mAb in the test line and the control line,respectively,in a nitrocellulose membrane.The test strip,assembled with sample pad,conjugate pad,test pad and absorbent pad,could be used to detect TC during seawater sample flowing through these components in turn.The results could be observed by the naked eye in 10min.The visible limit of detection(vLOD)was 20μgL^(-1) for TC in seawater.The CG-ICA test results were in good agreement with those of liquid chromatography-tandem mass spectrometry(LC-MS/MS).The assay also showed that,oxytetracycline(OTC)and chlortetracycline(CTC),as the structural analogues of TC,did not interfere with TC determination.Furthermore,the TC concentration given by test strip could not be affected by the fluctuation of temperature(10℃–30℃),pH(7–9)and salinity(0–40)of seawater.Therefore,CG-ICA is a suitable tool for rapid,on-site,and semi-quantitative detection of TC in seawater.

A Furan-Substituted Polymeric Hole-Transporting Material for Energy Level Regulation and Less Planarity in Colloidal Quantum Dot Solar Cells

For efficient colloidal quantum dot(CQD)solar cells(CQD-SCs),thiol-passivated p-type CQDs are generally used as a hole-transporting material(HTM);however,there are issues with the control of optoelectrical properties,low thiol passivation rate,and poor morphology with a power conversion efficiency(PCE)of approximately 11%.Although polymeric HTMs have been introduced to address these issues,maximizing efficiency and achieving green-solvent processability and thermal stability for commercialization is necessary.Here,we synthesize a novel benzodifuran(BDF)-based HTM(asy-ranPBTBDF)showing an electron-deficient state,low steric hindrance,and low planarity compared to those of a typical benzodithiophene(BDT)-based HTM(asy-ranPBTBDT).BDF properties lead to deep high occupied molecular orbital(HOMO)levels,closeπ-πstacking,excellent solubility,and amorphous properties related to efficiency,green-solvent processability,and thermal stability.With these benefits,the asy-ranPBTBDF-based CQD-SC showed enhanced open-circuit voltage(Voc)(0.65 V)and PCE(13.29%)compared to those of the asy-ranPBTBDT-based device(0.63 V and 12.22%)in toxic processes with chlorobenzene.The asy-ranPBTBDF-based CQD-SC showed a PCE of 12.51%in a green-solvent process with 2-methylanisole and improved thermal stability at 80℃(83.8%retaining after 24 h)owing to less lateral crystallization than the asy-ranPBTBDT-based device(60.8%retaining after 24 h).

Special Issue:Carbohydrate Hydrocolloids in Food Systems:from Structure to Human Health

Preface Carbohydrate hydrocolloids mainly refer to the carbohydrate polymers and oligomers that can form colloidal systems when dispersed in water.A great variety of these poly saccharides and oligosaccharides are used as functional food additives,such as starch,modified starch,pectin,xanthan,carrageenans,gellan gum,alginate,galactomannans(e.g.,guar gum and locust bean gum),gum Arabic or acacia gum,gum karaya,gum tragacanth,carboxymethyl cellulose,and various oligosaccharides,to name but a few.

Review of roll-to-roll fabrication techniques for colloidal quantum dot solar cells

Colloidal quantum dots(CQDs)are of great interest to photovoltaic(PV)technologies as they possess the benefits of solution-processability,size-tunability,and roll-to-roll manufacturability,as well as unique capabilities to harvest near-infrared(NIR)radiation.During the last decade,lab-scale CQD solar cells have achieved rapid improvement in the power conversion efficiency(PCE)from~1%to 18%,which will potentially exceed 20%in the next few years and approach the performance of other PV technologies,such as perovskite solar cells and organic solar cells.In the meanwhile,CQD solar cells exhibit long lifetimes either under shelf storage or continuous operation,making them highly attractive to industry.However,in order to meet the industrial requirements,mass production techniques are necessary to scale up the fabrication of those lab devices into large-area PV modules,such as roll-to-toll coating.This paper reviews the recent developments of large-area CQD solar cells with a focus on various fabrication methods and their principles.It covers the progress of typical large-area coating techniques,including spray coating,blade coating,dip coating,and slot-die coating.It also discusses next steps and new strategies to accomplish the ultimate goal of the low-cost large-area fabrication of CQD solar cells and emphasizes how artificial intelligence or machine learning could facilitate the developments of CQD solar cell research.

Bio-inspired Hydroxyapatite/Gelatin Transparent Nanocomposites

Hydroxyapatite(HA)nanoparticles impart outstanding mechanical properties to organicinorganic nanocomposites in bone.Inspired by the composite structure of HA nanoparticles and collagen in bone,a high performance HA/gelatin nanocomposite was first developed.The nanocomposites have much better mechanical properties(elongation at break 29.9%,tensile strength 90.7 MPa,Young’s modulus 5.24 GPa)than pure gelatin films(elongation at break 9.3%,tensile strength 90.8 MPa,Young’s modulus 2.5 GPa).In addition,the composite films keep a high transmittance in visible wavelength range from 0%to 60%of the HA solid content.These differences in properties are attributed to the homogeneous distribution of HA nanoparticles in the gelatin polymer matrix and the strong interaction between the particle surfaces and the gelatin molecules.This protocol should be promising for HA-based nanocomposites with enhanced mechanical properties for biomedical applications.

利用纳米气泡控制农业废水灌溉系统复合污垢的机制

The increasing demand for wastewater treatment has become a notable trend for addressing global water scarcity.However,fouling is a significant challenge for wastewater distribution engineering systems.This study provides an approach using nanobubbles(NBs)to control fouling.The antifouling capacities of three types of NBs,six oxygen concentrations,and two application procedures(prevention and removal)are investigated.The results show that NBs effectively mitigate composite fouling—including biofouling,inorganic scaling,and particulate fouling—in comparison with the non-NBs group.More specifically,hydroxyl radicals generated by the self-collapse of NBs oxidize organics and kill microorganisms in wastewater.The negatively charged surfaces of the NBs transform the crystalline form of CaCO_(3)from calcite to looser aragonite,which reduces the likelihood of ion precipitation.Furthermore,the NBs gas-liquid interfaces act as gas"bridges"between colloidal particles,enhancing the removal of particles from wastewater.Lastly,although the NBs inhibit the growth of fouling,they do not significantly remove the already adhered fouling in non-NBs treated groups.This study anticipates that the application of NBs will address the significant fouling issue for various wastewater distribution engineering systems in order to meet the global challenge of sustainable water supplies.

Unraveling the efficiency losses and improving methods in quantum dot-based infrared up-conversion photodetectors

Quantum dot-based up-conversion photodetector,in which an infrared photodiode(PD)and a quantum dot light-emitting diode(QLED)are back-to-back connected,is a promising candidate for low-cost infrared imaging.However,the huge efficiency losses caused by integrating the PD and QLED together hasn’t been studied sufficiently.This work revealed at least three origins for the efficiency losses.First,the PD unit and QLED unit usually didn’t work under optimal conditions at the same time.Second,the potential barriers and traps at the interconnection between PD and QLED units induced unfavorable carrier recombination.Third,much emitted visible light was lost due to the strong visible absorption in the PD unit.Based on the understandings on the loss mechanisms,the infrared up-conversion photodetectors were optimized and achieved a breakthrough photon-to-photon conversion efficiency of 6.9%.This study provided valuable guidance on how to optimize the way of integration for up-conversion photodetectors.

An Alternative Mechanism for the Instant Removal of Hypervascular Anaplastic Meningioma with Recovery of Mentality with NaCl + KCl

Background: There is limited information regarding adjuvant treatment for malignant meningiomas. Although external whole-brain irradiation is recommended, the patient’s family in our case rejected this modality. Notably, traditional chemotherapy was ineffective. Aim: I speculated if the exfoliation of graphene could disassemble the three-dimensional (3D) structures of the graphene because the tumor mass or the blood clots including the graphene consisted of inhomogeneous materials. Therefore, I aimed to explore another possible mechanism for the instant removal of inhomogeneous materials. Method: Herein, I report a case of anaplastic papillary meningioma. A 59- year-old man presented with partial complex seizures and recurrent headaches following craniotomy for the removal of a mass with a right frontotemporal convexity 10 years ago. Computed tomography (CT) and magnetic resonance imaging demonstrated a right frontotemporal mass with diffuse contrast enhancement and extensive surrounding edema. A right frontotemporal flap was performed. The tumor and the infiltrated dura were removed, but massive intraoperative bleeding occurred and the right middle cerebral artery was clipped at the M2 territory. Postoperatively, the follow-up CT scan revealed hydrocephalus. Accordingly, a ventriculoperitoneal shunt was placed. The patient suffered from left hemiplegia as a sequela of intraoperative bleeding. Four months later, the follow-up CT scan showed chronic epidural hematoma in the right frontotemporoparietal region. The patient also had an altered level of consciousness. Results: The patient’s level of consciousness was restored after infusion of a NaCl + KCl solution with instant disappearance of the mass. Conclusion: There may be another mechanism for disassembling the inhomogeneous graphene-containing complex, such as quantum fluctuation of the graphene exfoliation with pair annihilation or relation to tissue engineering by the graphene.

Preparation of colloidal gold immunochromatography strip for detection of methamidophos residue

Methamidophos (Met) is a broad spectrum organophosphorus insecticide and acaricide.Even a trace of its residue is harmful to humans and many animals.In this study,the synthesis and identification of colloidal gold particles and antibody-colloidal gold conjugates were performed,and the preparation of colloidal gold immunochromatography strip was conducted for detection of Met residue.The size of colloidal gold particles was checked using a transmission electron microscope (TEM).The formation of antibody-coll...

Inorganic Colloidal Electrolyte for Highly Robust Zinc‑Ion Batteries

Zinc-ion batteries(ZIBs)is a promising electrical energy storage candidate due to its eco-friendliness,low cost,and intrinsic safety,but on the cathode the element dissolution and the formation of irreversible products,and on the anode the growth of dendrite as well as irreversible products hinder its practical application.Herein,we propose a new type of the inorganic highly concentrated colloidal electrolytes(HCCE)for ZIBs promoting simultaneous robust protection of both cathode/anode leading to an effective suppression of element dissolution,dendrite,and irreversible products growth.The new HCCE has high Zn^(2+)ion transference number(0.64)endowed by the limitation of SO4^(2−),the competitive ion conductivity(1.1×10^(–2) S cm^(−1))and Zn2+ion diffusion enabled by the uniform pore distribution(3.6 nm)and the limited free water.The Zn/HCCE/α-MnO2 cells exhibit high durability under both high and low current densities,which is almost 100%capacity retention at 200 mA g^(−1) after 400 cycles(290 mAh g^(−1))and 89%capacity retention under 500 mA g^(−1) after 1000 cycles(212 mAh g^(−1)).Considering material sustainability and batteries’high performances,the colloidal electrolyte may provide a feasible substitute beyond the liquid and all-solid-state electrolyte of ZIBs.

Colloidal Gas Aphrons: A Novel Approach to Preventing Formation Impairment

Colloidal gas aphrons (CGAs) were first reported by Sebba (1971) as micro bubbles (25-125 μm), composed of a gas nucleus surrounded by a thin surfactant film and created by intense stirring of a surfactant solution. Since then, these colloidal dispersions have been used for diverse applications, with a particular focus on separation processes. However, exploitation of CGAs in petroleum industry is only at the outset. CGAs were first used in west Texas in 1998, under the name Aphron drilling fluids. This kind of fluid is characterized as having a continuous phase, a high viscosity at a low shear rate and containing, as an internal phase, micro air or gas bubbles, non-coalescing and recirculating. In this paper, we illuminate the physical and chemical properties of aphron drilling fluid and its processing mechanism.

High-gravity-assisted green synthesis of rare-earth doped calcium molybdate colloidal nanophosphors

In this work,we report an innovative route for the synthesis of rare-earth doped calcium molybdate(CaMoO4)nanophosphors by using high gravity rotating packed bed(RPB)technology and paraffin liquid as the solvent.The significant intensified mass transfer and micromixing of reactants in the RPB reactor are benefiting for homogeneous doping of rare-earth ions in the host materials,leading to nanophosphors with high quantum efficiency.The use of liquid paraffin as the solvent eliminates the safety risks associated with volatile organic compounds,increasing the potential for clean production of nanophosphors.Under excitation of deep ultraviolet(DUV)light,the CaMoO4:Na+,Eu3+nanophosphors exhibit red emission at peak wavelength of 615 nm and quantum yield of up to 35.01%.The CaMoO4:Na+,Tb3+nanophosphors exhibit green emission at peak wavelength of543 nm with quantum yield of up to 30.66%.The morphologies of the nanophosphors are tunable from nanofibers through nanorods to nanodots and the possible mechanism of controlling the formation of different nanostructures is proposed on the basis of experimental results and theoretical analysis of mesoscience.These nanophosphors are highly dispersible in organic solvents and utilized for fabricating fabrication of flexible,freestanding luminescent films based on silicone resin.We also demonstrate the red LEDs consisting of the hybrid films of CaMoO4:Na+,Eu3+nanoparticles as color-converting phosphors and DUV LEDs as illuminators,offering strong potential for future nanophosphors-basedsolid-state lighting systems.

Preparation of Non-spherical Colloidal Silica Nanoparticle and Its Application on Chemical Mechanical Polishing of Sapphire

Non-spherical colloidal silica nanoparticle was prepared by a simple new method, and its particle size distribution and shape morphology were characterized by dynamic light scattering(DLS) and the Focus Ion Beam(FIB) system. This kind of novel colloidal silica particles can be well used in chemical mechanical polishing(CMP) of sapphire wafer surface. And the polishing test proves that non-spherical colloidal silica slurry shows much higher material removal rate(MRR) with higher coefficient of friction(COF) when compared to traditional large spherical colloidal silica slurry with particle size 80 nm by DLS. Besides, sapphire wafer polished by non-spherical abrasive also has a good surface roughness of 0.460 6 nm. Therefore, non-spherical colloidal silica has shown great potential in the CMP field because of its higher MRR and better surface roughness.

Fabrication of Large-area 3-D Ordered Silvercoated Colloidal Crystals and Macroporous Silver Films Using Polystyrene Templates

The highly ordered silver-coated colloidal crystals arrays and macroporous silver films were derived through an electrostatics-induced adsorption effect using polystyrene(PS) as templates. Carboxyl-modified PS microspheres were prepared by emulsifier-free emulsion polymerization using methacrylic acid(MAA) as the functional monomer. PS microspheres were self-assembled into close packing colloidal crystals of facecentered cubic arrays to the substrate with vertical deposition method. These colloidal crystals were modified using dopamine(DA) to form poly-dopamine(PDA) during its oxidative polymerization. Through electrostatic interaction, the silver nanoparticles were deposited and adsorbed onto the surfaces of colloidal crystals templates by exposing [Ag(NH_3)_2]^+solution to infrared irradiation. Removal of the polymeric template by etching with methylbenzene solvent resulted in 3D ordered macroporous silver films. The structural and properties of the ordered silver-coated arrays and macroporous silver films were characterized by field emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD), UV-vis spectroscopy and surface-enhanced Raman spectroscopy(SERS). The results indicate that the prepared silver-coated arrays and macroporous silver films possess the features of ordered multilayer arrangement, uniformity and repeatability as well as an ideal SERS effect.