The planetary boundary layer turbulence and moist convection parameterizations have been modified recently in the NASA Goddard Institute for Space Studies （GISS） Model E2 atmospheric general circulation model （GCM;...The planetary boundary layer turbulence and moist convection parameterizations have been modified recently in the NASA Goddard Institute for Space Studies （GISS） Model E2 atmospheric general circulation model （GCM; post-CMIP5, hereafter P5）. In this study, single column model （SCM_P5） simulated cloud fractions （CFs）, cloud liquid water paths （LWPs） and precipitation were compared with Atmospheric Radiation Measurement （ARM） Southern Great Plains （SGP） groundbased observations made during the period 2002-08. CMIP5 SCM simulations and GCM outputs over the ARM SGP region were also used in the comparison to identify whether the causes of cloud and precipitation biases resulted from either the physical parameterization or the dynamic scheme. The comparison showed that the CMIP5 SCM has difficulties in simulating the vertical structure and seasonal variation of low-level clouds. The new scheme implemented in the turbulence parameterization led to significantly improved cloud simulations in P5. It was found that the SCM is sensitive to the relaxation time scale. When the relaxation time increased from 3 to 24 h, SCM_P5-simulated CFs and LWPs showed a moderate increase （10%-20%） but precipitation increased significantly （56%）, which agreed better with observations despite the less accurate atmospheric state. Annual averages among the GCM and SCM simulations were almost the same, but their respective seasonal variations were out of phase. This suggests that the same physical cloud parameterization can generate similar statistical results over a long time period, but different dynamics drive the differences in seasonal variations. This study can potentially provide guidance for the further development of the GISS model.展开更多
A single column model (SCM) is constructed by extracting the physical subroutines from the NCAR Community Climate Model version 1 (CCM1).Simulated data are generated by CCM1 and used to validate the SCM and to study t...A single column model (SCM) is constructed by extracting the physical subroutines from the NCAR Community Climate Model version 1 (CCM1).Simulated data are generated by CCM1 and used to validate the SCM and to study the sensitivity of the SCM to errors in its input data.It is found that the SCM temperature predictions are moderately sensitive to errors in the input horizontal temperature flux convergence and moisture flux convergence.Two types of error are concerned in this study,random errors due to insufficient data resolution,and errors due to insufficient data area coverage.While the first type of error can be reduced by filtering and/or increasing the data resolution,it is shown that the second type of error can be reduced by enlarging the data area coverage and using a suitable method to compute the input flux convergence terms.展开更多
This work aims to study the modeling and sizing of a floor reinforced by ballasted columns. We are studying the system of reinforcement by ballasted columns because this technique is able to replace deep foundations t...This work aims to study the modeling and sizing of a floor reinforced by ballasted columns. We are studying the system of reinforcement by ballasted columns because this technique is able to replace deep foundations that are technically difficult to realize and their cost is higher. The modelling and dimensioning of foundations on a ballasted column will be an important contribution to the state of the art of this method because it will highlight the mode of transfer of loads, and will expose the induced deformations by also allowing to verification criteria of bearing capacity and allowable settlement according to geometric information of the model. The columns on a substrate located at 9 m have a length of 9 m and a diameter of 40 cm and were obtained by incorporating ballast of granular class 0/31.5 of internal friction angle of 38˚ and a density weight of 21 kN/m3. The choice of this method is based on the geotechnical characteristics of the initial soil. Thus, identification and characterization tests were carried out to estimate the bearing capacity and the settlement giving respectively 125 kPa and 57 cm. These results show the ground does not have sufficient mechanical properties to withstand the loads transmitted by the tank. By adopting the reinforcement of the soil with ballasted columns, numerical calculations show that after applying a load equal to 265.1 KPa, 20 cm vertical settlement and 17 cm horizontal displacement were obtained. This is in the tolerable deformation range for our tank, namely, less than 20 cm. Analytically, in addition to reducing settlement, ballasted columns, Due to their high stiffness, they have effectively contributed to the increase of the permissible soil stress up to 257 kPa.展开更多
It is presented that there is a pumping effect at its base in the development process of a cumulus.In the strongest stage of cumulus development,the pumping is mainly produced by the buoyance at the base,and may be ta...It is presented that there is a pumping effect at its base in the development process of a cumulus.In the strongest stage of cumulus development,the pumping is mainly produced by the buoyance at the base,and may be taken as the first approximation of the ascending speed at the base. The results of numerical calculations and simulations of four observed radar echoes show that as the first approximation,the height of air-mass cumulus may be simulated by Haltiner model in the absence of ob- served ascending speeds at the base,and the Haltiner model can be characterized by the sensitivity of the cumulus development to the virtual temperature excess over environment at the base.展开更多
A unique cyclonic static microbubble flotation column was developed for oily wastewater separation.The separation effciency was found to be highly dependent on gas holdup and bubble size distribution.By changing the c...A unique cyclonic static microbubble flotation column was developed for oily wastewater separation.The separation effciency was found to be highly dependent on gas holdup and bubble size distribution.By changing the circulation pressure,gas flow rate,frother concentration,the effect of operation parameters on gas holdup and oil removal effciency were attained.A mathematical modeling between the kinetic constant and the gas holdup was established for oily water separation process.The results show that higher gas holdup and smaller microbubble sizes are benefcial to improve oil removal effciency.展开更多
Based on a series of previous studies, an experiment on the integral seismic behavior of a 1/3 scaled model of two-bay and three-story reinforced concrete frame with split columns at lower two stories is performed und...Based on a series of previous studies, an experiment on the integral seismic behavior of a 1/3 scaled model of two-bay and three-story reinforced concrete frame with split columns at lower two stories is performed under cyclic loading. The original columns at lower two stories of the model frame are short columns and they are replaced by the split columns. The hysteresis curves between the horizontal cyclic load and the lateral displacement at the top of the model frame, indicate that under the cyclic loading, the model frame undergoes the process of cracking, yielding, and maximum loading before being destroyed at the ultimate load. They also indicate that the model frame has better ductility, and the ratio of the ultimate displacement to the yielding displacement, reaches 6.0. The yielding process of the model frame shows that for the frame with split columns, plastic hinges are generated at the ends of beams and then the columns begin yielding while the frame still possesses the bearing and deformation capacity. The design idea of directly changing the short column to long one in the reinforced concrete frame may be realized by replacing the short column with the split one.展开更多
We present comparisons of the NO2 regional Chemical Transport Model （CTM） simulations over North-eastern North America during the time period from May to September, 1998 with hourly surface NO2 observations and the ...We present comparisons of the NO2 regional Chemical Transport Model （CTM） simulations over North-eastern North America during the time period from May to September, 1998 with hourly surface NO2 observations and the NO2 columns retrieved from the GOME （Global Ozone Monitoring Experiment） satellite instrument. The model calculations were performed using the Mesoscale Meteorological Model 5 （MM5）, Sparse Matrix Operator Kernal Emissions （SMOKE）, and Community Multiscale Air Quality （CMAQ） modeling systems, using the emission data from the National Emissions Inventory （NEI） databases of 1996 （U.S.） and 1995 （Canada）. The major objectives were to assess the performance of the CMAQ model and the accuracy of the emissions inventories as they affected the simulations of this important short-lived atmospheric species. The modeled （NcMAQ） and measured （NGOME） NO2 column amounts, as well as their temporal variations, agreed reasonably well. The absolute differences （NcMAQ-NGOME） across the domain were between ±3.0×10^15 molecules cm^-2, but they were less than ±1.0×10^15 molecules cm^-2 over the majority （80%） of the domain studied. The overall correlation coefficient between the measurements and the simulations was 0.75. The differences were mainly ascribed to a combination of inaccurate emission data for the CTM and the uncertainties in the GOME retrievals. Of these, the former were the more easily identifiable.展开更多
The performance of different nonlinear modelling strategies to simulate the response of RC columns subjected to axial load combined with cyclic biaxial horizontal loading is compared. The models studied are classified...The performance of different nonlinear modelling strategies to simulate the response of RC columns subjected to axial load combined with cyclic biaxial horizontal loading is compared. The models studied are classified into two categories according to the nonlinearity distribution assumed in the elements： lumped-plasticity and distributed inelasticity. For this study, results of tests on 24 columns subjected to cyclic uniaxial and biaxial lateral displacements were numerically reproduced. The analyses show that the global envelope response is satisfactorily represented with the three modelling strategies, but significant differences were found in the strength degradation for higher drift demands and energy dissipation.展开更多
In order to establish a restoring-force model for modified concrete columns with recycled aggregates concrete(RAC), cyclic loading tests were carried out on five concretes with RAC columns and ordinary concrete frame ...In order to establish a restoring-force model for modified concrete columns with recycled aggregates concrete(RAC), cyclic loading tests were carried out on five concretes with RAC columns and ordinary concrete frame columns under the combined influence with different admixtures and admixtures ratios(silica fume and hybrid fiber). The expressions for characteristic nodes of the skeleton curve were given by the analysis and numerical regression of the test results. In addition, the hysteretic rules of the restoring-force model and the expression for unloading stiffness were presented. Finally, we summed up the complete calculation method of the hysteretic restoring force, whose results were in good agreement with experiment. The results demonstrated that the proposed model could simulate and reflect the corresponding hysteretic behaviors, and the calculation method can provide the theoretical basis for the engineering application.展开更多
Using a five point conductivity technique local values of bubble size,bubble velocity and gas fractionhave been experimentally determined in a 288 mmID and 4.3 m high bubble column as a function of axial andradial pos...Using a five point conductivity technique local values of bubble size,bubble velocity and gas fractionhave been experimentally determined in a 288 mmID and 4.3 m high bubble column as a function of axial andradial position for the air/water and CO<sub>2</sub>/N<sub>2</sub>/aqueous MDEA systems.The experimental results are comparedwith predictions from a fundamental two-fluid model.The implementation of a non-steady lateral drag term inthe two-fluid model has been shown.In addition to improving the physical realism of the model,it is found togive slight improvements in the predictions of the distributions of local bubble size.Predictions of bubble size arefound in reasonable agreement with experimental values in the heterogeous flow regime,whereas they are stil1found to be unreliable at low gas velocities.Local void predictions are found in reasonable agreement with experi-mental values,but deviations occur in the homogeneous flow regime towards the wall.This is attributed to defi-ciencies in the simplified bubble size展开更多
This work aims at comparing surface tension models in VOF(Volume of Fluid) modeling and investigating the effects of gas distributor and gas velocity. Hydrodynamics of a continuous chain of bubbles inside a bubble col...This work aims at comparing surface tension models in VOF(Volume of Fluid) modeling and investigating the effects of gas distributor and gas velocity. Hydrodynamics of a continuous chain of bubbles inside a bubble column reactor was simulated. The grid independence study was first conducted and a grid size of 1.0 mm was adopted in order to minimize the computing time without compromising the accuracy of the results. The predictions were validated by comparing the experimental studies reported in the literature. It was found that all surface tension models can describe the bubble rise and bubble plume in a column with slight deviations.展开更多
基金supported by the DOE ASR program(Grant No.DESC008468)
文摘The planetary boundary layer turbulence and moist convection parameterizations have been modified recently in the NASA Goddard Institute for Space Studies （GISS） Model E2 atmospheric general circulation model （GCM; post-CMIP5, hereafter P5）. In this study, single column model （SCM_P5） simulated cloud fractions （CFs）, cloud liquid water paths （LWPs） and precipitation were compared with Atmospheric Radiation Measurement （ARM） Southern Great Plains （SGP） groundbased observations made during the period 2002-08. CMIP5 SCM simulations and GCM outputs over the ARM SGP region were also used in the comparison to identify whether the causes of cloud and precipitation biases resulted from either the physical parameterization or the dynamic scheme. The comparison showed that the CMIP5 SCM has difficulties in simulating the vertical structure and seasonal variation of low-level clouds. The new scheme implemented in the turbulence parameterization led to significantly improved cloud simulations in P5. It was found that the SCM is sensitive to the relaxation time scale. When the relaxation time increased from 3 to 24 h, SCM_P5-simulated CFs and LWPs showed a moderate increase （10%-20%） but precipitation increased significantly （56%）, which agreed better with observations despite the less accurate atmospheric state. Annual averages among the GCM and SCM simulations were almost the same, but their respective seasonal variations were out of phase. This suggests that the same physical cloud parameterization can generate similar statistical results over a long time period, but different dynamics drive the differences in seasonal variations. This study can potentially provide guidance for the further development of the GISS model.
文摘A single column model (SCM) is constructed by extracting the physical subroutines from the NCAR Community Climate Model version 1 (CCM1).Simulated data are generated by CCM1 and used to validate the SCM and to study the sensitivity of the SCM to errors in its input data.It is found that the SCM temperature predictions are moderately sensitive to errors in the input horizontal temperature flux convergence and moisture flux convergence.Two types of error are concerned in this study,random errors due to insufficient data resolution,and errors due to insufficient data area coverage.While the first type of error can be reduced by filtering and/or increasing the data resolution,it is shown that the second type of error can be reduced by enlarging the data area coverage and using a suitable method to compute the input flux convergence terms.
文摘This work aims to study the modeling and sizing of a floor reinforced by ballasted columns. We are studying the system of reinforcement by ballasted columns because this technique is able to replace deep foundations that are technically difficult to realize and their cost is higher. The modelling and dimensioning of foundations on a ballasted column will be an important contribution to the state of the art of this method because it will highlight the mode of transfer of loads, and will expose the induced deformations by also allowing to verification criteria of bearing capacity and allowable settlement according to geometric information of the model. The columns on a substrate located at 9 m have a length of 9 m and a diameter of 40 cm and were obtained by incorporating ballast of granular class 0/31.5 of internal friction angle of 38˚ and a density weight of 21 kN/m3. The choice of this method is based on the geotechnical characteristics of the initial soil. Thus, identification and characterization tests were carried out to estimate the bearing capacity and the settlement giving respectively 125 kPa and 57 cm. These results show the ground does not have sufficient mechanical properties to withstand the loads transmitted by the tank. By adopting the reinforcement of the soil with ballasted columns, numerical calculations show that after applying a load equal to 265.1 KPa, 20 cm vertical settlement and 17 cm horizontal displacement were obtained. This is in the tolerable deformation range for our tank, namely, less than 20 cm. Analytically, in addition to reducing settlement, ballasted columns, Due to their high stiffness, they have effectively contributed to the increase of the permissible soil stress up to 257 kPa.
文摘It is presented that there is a pumping effect at its base in the development process of a cumulus.In the strongest stage of cumulus development,the pumping is mainly produced by the buoyance at the base,and may be taken as the first approximation of the ascending speed at the base. The results of numerical calculations and simulations of four observed radar echoes show that as the first approximation,the height of air-mass cumulus may be simulated by Haltiner model in the absence of ob- served ascending speeds at the base,and the Haltiner model can be characterized by the sensitivity of the cumulus development to the virtual temperature excess over environment at the base.
基金the National Natural Science Foundation of China(No.51104158)the Science and Technology Fund of China University of Mining & Technology (No.2011QNB08) for the financial support
文摘A unique cyclonic static microbubble flotation column was developed for oily wastewater separation.The separation effciency was found to be highly dependent on gas holdup and bubble size distribution.By changing the circulation pressure,gas flow rate,frother concentration,the effect of operation parameters on gas holdup and oil removal effciency were attained.A mathematical modeling between the kinetic constant and the gas holdup was established for oily water separation process.The results show that higher gas holdup and smaller microbubble sizes are benefcial to improve oil removal effciency.
基金Supported by National Science Fund for Distinguished Young Scholars of China( No. 50425824
文摘Based on a series of previous studies, an experiment on the integral seismic behavior of a 1/3 scaled model of two-bay and three-story reinforced concrete frame with split columns at lower two stories is performed under cyclic loading. The original columns at lower two stories of the model frame are short columns and they are replaced by the split columns. The hysteresis curves between the horizontal cyclic load and the lateral displacement at the top of the model frame, indicate that under the cyclic loading, the model frame undergoes the process of cracking, yielding, and maximum loading before being destroyed at the ultimate load. They also indicate that the model frame has better ductility, and the ratio of the ultimate displacement to the yielding displacement, reaches 6.0. The yielding process of the model frame shows that for the frame with split columns, plastic hinges are generated at the ends of beams and then the columns begin yielding while the frame still possesses the bearing and deformation capacity. The design idea of directly changing the short column to long one in the reinforced concrete frame may be realized by replacing the short column with the split one.
文摘We present comparisons of the NO2 regional Chemical Transport Model （CTM） simulations over North-eastern North America during the time period from May to September, 1998 with hourly surface NO2 observations and the NO2 columns retrieved from the GOME （Global Ozone Monitoring Experiment） satellite instrument. The model calculations were performed using the Mesoscale Meteorological Model 5 （MM5）, Sparse Matrix Operator Kernal Emissions （SMOKE）, and Community Multiscale Air Quality （CMAQ） modeling systems, using the emission data from the National Emissions Inventory （NEI） databases of 1996 （U.S.） and 1995 （Canada）. The major objectives were to assess the performance of the CMAQ model and the accuracy of the emissions inventories as they affected the simulations of this important short-lived atmospheric species. The modeled （NcMAQ） and measured （NGOME） NO2 column amounts, as well as their temporal variations, agreed reasonably well. The absolute differences （NcMAQ-NGOME） across the domain were between ±3.0×10^15 molecules cm^-2, but they were less than ±1.0×10^15 molecules cm^-2 over the majority （80%） of the domain studied. The overall correlation coefficient between the measurements and the simulations was 0.75. The differences were mainly ascribed to a combination of inaccurate emission data for the CTM and the uncertainties in the GOME retrievals. Of these, the former were the more easily identifiable.
基金Financial support provided by "FCT - Fundao para a Ciência e Tecnologia,"Portugal,through the research project PTDC/ECM/102221/2008
文摘The performance of different nonlinear modelling strategies to simulate the response of RC columns subjected to axial load combined with cyclic biaxial horizontal loading is compared. The models studied are classified into two categories according to the nonlinearity distribution assumed in the elements： lumped-plasticity and distributed inelasticity. For this study, results of tests on 24 columns subjected to cyclic uniaxial and biaxial lateral displacements were numerically reproduced. The analyses show that the global envelope response is satisfactorily represented with the three modelling strategies, but significant differences were found in the strength degradation for higher drift demands and energy dissipation.
基金Project(51178388)supported by the National Natural Science Foundation of ChinaProject(2013SZS01-Z02)supported by Key Laboratory Fund of Shaanxi Province,China
文摘In order to establish a restoring-force model for modified concrete columns with recycled aggregates concrete(RAC), cyclic loading tests were carried out on five concretes with RAC columns and ordinary concrete frame columns under the combined influence with different admixtures and admixtures ratios(silica fume and hybrid fiber). The expressions for characteristic nodes of the skeleton curve were given by the analysis and numerical regression of the test results. In addition, the hysteretic rules of the restoring-force model and the expression for unloading stiffness were presented. Finally, we summed up the complete calculation method of the hysteretic restoring force, whose results were in good agreement with experiment. The results demonstrated that the proposed model could simulate and reflect the corresponding hysteretic behaviors, and the calculation method can provide the theoretical basis for the engineering application.
文摘Using a five point conductivity technique local values of bubble size,bubble velocity and gas fractionhave been experimentally determined in a 288 mmID and 4.3 m high bubble column as a function of axial andradial position for the air/water and CO<sub>2</sub>/N<sub>2</sub>/aqueous MDEA systems.The experimental results are comparedwith predictions from a fundamental two-fluid model.The implementation of a non-steady lateral drag term inthe two-fluid model has been shown.In addition to improving the physical realism of the model,it is found togive slight improvements in the predictions of the distributions of local bubble size.Predictions of bubble size arefound in reasonable agreement with experimental values in the heterogeous flow regime,whereas they are stil1found to be unreliable at low gas velocities.Local void predictions are found in reasonable agreement with experi-mental values,but deviations occur in the homogeneous flow regime towards the wall.This is attributed to defi-ciencies in the simplified bubble size
基金Supported by the National Ministry of Science and Technology of China(2017YFB0602401)the National Natural Science Foundation of China(21776173,91834303,U1862201,21625603)the Program of Shanghai Subject Chief Scientists(18XD1402000).
文摘This work aims at comparing surface tension models in VOF(Volume of Fluid) modeling and investigating the effects of gas distributor and gas velocity. Hydrodynamics of a continuous chain of bubbles inside a bubble column reactor was simulated. The grid independence study was first conducted and a grid size of 1.0 mm was adopted in order to minimize the computing time without compromising the accuracy of the results. The predictions were validated by comparing the experimental studies reported in the literature. It was found that all surface tension models can describe the bubble rise and bubble plume in a column with slight deviations.
