Pressure stimulated current in progressive failure process of combined coal-rock under uniaxial compression:Response and mechanism

Effective monitoring of the structural health of combined coal-rock under complex geological conditions by pressure stimulated currents(PSCs)has great potential for the understanding of dynamic disasters in underground engineering.To reveal the effect of this way,the uniaxial compression experiments with PSC monitoring were conducted on three types of coal-rock combination samples with different strength combinations.The mechanism explanation of PSCs are investigated by resistivity test,atomic force microscopy(AFM)and computed tomography(CT)methods,and a PSC flow model based on progressive failure process is proposed.The influence of strength combinations on PSCs in the progressive failure process are emphasized.The results show the PSC responses between rock part,coal part and the two components are different,which are affected by multi-scale fracture characteristics and electrical properties.As the rock strength decreases,the progressive failure process changes obviously with the influence range of interface constraint effect decreasing,resulting in the different responses of PSC strength and direction in different parts to fracture behaviors.The PSC flow model is initially validated by the relationship between the accumulated charges of different parts.The results are expected to provide a new reference and method for mining design and roadway quality assessment.

Combined hybrid energy storage system and transmission grid model for peak shaving based on time series operation simulation

This study proposes a combined hybrid energy storage system(HESS) and transmission grid(TG) model, and a corresponding time series operation simulation(TSOS) model is established to relieve the peak-shaving pressure of power systems under the integration of renewable energy. First, a linear model for the optimal operation of the HESS is established, which considers the different power-efficiency characteristics of the pumped storage system, electrochemical storage system, and a new type of liquid compressed air energy storage. Second, a TSOS simulation model for peak shaving is built to maximize the power entering the grid from the wind farms and HESS. Based on the proposed model, this study considers the transmission capacity of a TG. By adding the power-flow constraints of the TG, a TSOS-based HESS and TG combination model for peak shaving is established. Finally, the improved IEEE-39 and IEEE-118 bus systems were considered as examples to verify the effectiveness and feasibility of the proposed model.

Effects of ginsenoside of stem and leaf combined with choline on learning and memory ability of rat models with Alzheimer diseases

BACKGROUND： Central adrenergic nerve and 5-serotonergic nerve can influence central cholinergic nerve on learning and memory and make easy for study; however, ginsenoside of stem and leaf （GSL） can improve functions of central adrenergic nerve; moreover, 5-serotonergic nerve and the combination with choline can produce synergistic effect and enhance learning and memory ability so as to improve learning and memory disorder of patients with Alzheimer disease （AD）. OBJECTIVE ： To observe the effects of GSL combining with choline on learning and memory of AD model rats DESIGN ： Randomized grouping design and controlled animal study SETIING ： Department of Pharmacology, Taishan Medical College MATERIALS ： The experiment was carried out in the Pharmacological Department of Medical College of Jilin University from October 1996 to January 1997. Forty healthy male Wistar rats of clean grade were randomly divided into 5 groups, including sham-injury group, model group, GSL group, choline group and combination group, with 8 rats in each group. Main medications： GSL with the volume more than 92.8% was provided by Department of Chemistry, Norman Bethune Medical College of Jilin University. Panaxatriol, the main component, was detected with thin layer scanning technique and regarded as the index of GSL quality [（55±1）%, CV= 2%, n = 5]. Choline was provided by the Third Shanghai Laboratory Factory. METHODS ： 150 nmol quinolinic acid was used to damage bilateral Meynert basal nuclei of adult rats so as to establish AD models. Rats in GSL, choline and combination groups were intragastric administrated with 400 mg/kg GSL, 200 mg/kg choline （20 mL/kg）, and both respectively last for 17 days starting from two days before operation. Rats in sham-injury group and model group were perfused with the same volume of distilled water once in each morning for the same days. （1） Passive avoidance step-down test： Five minutes later, rats jumped up safe platform when they were shocked with 36 V alternating current. If rats jumped down from the platform and the feet touched railings, the response was wrong. Numbers of wrong response were recorded within 3 minutes, and then the test was redone after 24 hours. （2） Morris water-maze spatial localization task： Swimming from jumping-off to platform directly was regarded as right response. Additionally, 4 successively right responses were regarded as the standard. Each rat was trained 10 times a day with 120 s per time for 3 successive days. The interval was 30 s. Three days later, numbers of right response were recorded. The training times were increased to 30 for unlearned rats. （3） Measurement of activity of choline acetylase in cerebral cortex： Rats were sacrificed at 17 days after operation to obtain cerebral cortex to measure activity of choline acetylase with radiochemistry technique. （4） Synergistic effect： It was expressed as Q value： Q value = factual incorporative effect/anticipant incorporative effect; Q ≥ 1 was regarded as synergistic effect. Anticipant incorporative effect = （EA＋EB-EA·EB）, EA and EB were single timing effect, respectively in GSL group and choline group. E（step-down test and Morris water maze test） = （x in model group - factual value in medicine groups）/x in model group; E （activity of choline acetylase） = （factual value in medicine groups -xin model group）/xin model group. MAIN OUTCOME MEASURES ： （1） Passive avoidance step-down test and Morris water-maze spatial localization task in the study of learning and memory; （2） activity of choline acetylase. RESULTS ： All 40 rats were involved in the final analysis. （1） Passive avoidance response： At learning phase on first day and retesting phase on the next day, numbers of wrong responses within 3 minutes were more in model group than sham operation group, and there was significant difference [（5.88±1.46）, （2.25±0.87） times; （2.63±1.06）, （0.50±0.53） times; P 〈 0.01]; numbers of wrong responses within 3 minutes were less in combination group than model group, and there was significant difference [learning phase： （1.12±0.83）, （5.88±1.46） times; retesting phase： （0.38±0.74）, （2.63±1.06）times, P 〈 0.01]; moreover, effect was stronger than that in GSL group and choline group. The Q value was 1.07 and 1.59, respectively and it showed synergistic effect. Spatial localization task： Training times were more in model group than sham operation group, and there was significant difference [（2.9±2.5）, （12.6±3.5） times; P 〈 0.01]. Training times were less in combination group than model group, and there was significant difference [（11.8±2.4）, （27.9±2.5） times, P 〈 0.01]; moreover, effect was stronger than that in GSL group and choline group. The Q value was 1.07 and it showed synergistic effect. （3） Activity of choline acetylase： Activity was lower in model group than sham operation group, and there was significant difference [（30.56±8.33）, （61.11 ±8.33） nkat/g; P 〈 0.01]. Activity was higher in combination group than model group and there was significant difference [（50.00±8.33）, （30.56±8.33） nkat/g, P 〈 0.01];moreover, effect was stronger than that in GSL group and choline group. The Q value was 1.5 and it showed synergistic effect. CONCLUSZON： GSL in combination with choline can synergically improve the disorder of learning and memory of AD model rats. Its mechanism may be involved in enhancing the function of central cholinergic system.

Combined refraction and diffraction models for sea waves over complicated topography and with currents in shallow water

-Combined refraction and diffraction models in the form of linear parabolic approximation are derived through smallparameter method. More strictly theoretical basis and more accuracy in the models than Lozano's (1980) are obtained. Some theoretical defects in Liu's model (1985) with consideration of current are not only found but also eliminated. More strict and accurate models are, therefore, presented in this paper.The calculation results and analysis in applying the models to actual wave field with consideration of bottom friction will be given in the following paper.

Compression failure conditions of concrete-granite combined body with different roughness interface

Bedrock and concrete lining are typical composite structures in the engineering field and the stability of the geological body and engineering body is directly connected to the mechanical properties of the composite body.Under this background,the study provides the transverse isotropic equivalent model of concrete-granite double-layer composite based on the notion of strain energy equivalence.Assuming that the strength failure of concrete and granite meets the Mohr-Coulomb criterion,then the strength failure model of the combined body considering the joint roughness coefficient(JRC)is derived,and the influences of JRC,the height ratio of concrete to granite,and confining pressure on the strength failure characteristics of the combined body are emphatically analyzed.Finally,the model applicability is illustrated by the uniaxial and triaxial compression tests on concrete monomer,granite monomer and concretegranite composite samples(CGCSs)with different JRCs.The results revealed that the compressive strength of the composite is closer to the concrete with lower strength in the combined body under different confining pressures.Adding interface roughness causes to raise the compressive strength of the composite due to interfacial adhesion between concrete and granite,and a slowing growth trend is observed in compressive strength as roughness.The model can provide a certain reference for the stability design and evaluation of engineering rock mass.

Combined model based on optimized multi-variable grey model and multiple linear regression

The construction method of background value is improved in the original multi-variable grey model （MGM（1,m）） from its source of construction errors. The MGM（1,m） with optimized background value is used to eliminate the random fluctuations or errors of the observational data of all variables, and the combined prediction model together with the multiple linear regression is established in order to improve the simulation and prediction accuracy of the combined model. Finally, a combined model of the MGM（1,2） with optimized background value and the binary linear regression is constructed by an example. The results show that the model has good effects for simulation and prediction.

A Numerical Study on Effects of Land-Surface Heterogeneity from' Combined Approach' on Atmospheric ProcessPart II: Coupling-Model Simulations

Two land surface schemes, one the standard Biosphere / Atmosphere Transfer Scheme Version ie (BOZ) and the other B1Z based on B0Z and heterogeneously-treated by' combined approach' , were co 'pled to the meso-scale model MM4, respectively. Through the calculations of equations from the companion paper, parameters representing land surface heterogeneity and suitable for the coupling models were found out. Three cases were simulated for heavy rainfalls during 36 hours, and the sensitivity of short-term weather modeling to the land surface heterogeneity was tested. Through the analysis of the simulations of the three heavy rainfalls, it was demonstrated that BIZ, compared with BOZ, could more realistically reflect the features of the land surface heterogeneity, therefore could more realistically reproduce the circulation and precipitation amount in the heavy rainfall processes of the three cases. This shows that even short-term weather is sensitive to the land surface heterogeneity, which is more obvious with time passing, and whose influence is more pronounced in the lower layer and gradually extends to the middle and upper layer. Through the analysis of these simulations with BlZ, it is suggested that the bulk effect of smaller-scale fluxes (i.e., the momentum, water vapor and sensible heat fluxes) near the s ig nificantly-heterogeneous land surface is to change the larger-scale (i.e., meso-scale) circulation, and then to influence the development of the low-level jets and precipitation. And also, the complexity of the land-atmosphere interaction was shown in these simulations.

A combined numerical tidal model for the Hangzhou Bay and Qiantang River

-In order to avoid prescribing open boundary condition on the upstream side of the Hangzhou Bay, in numerical simulation of the tides and residual currents of the Bay, a 1-D model for the Qiantang River is connected to the 2-D model for the Hangzhou Bay. The harmonic constants of diurnal constituent [ (K1+O1)/2],semidiurnal constituent (M2) and shallow water constituent (M4) are obtained. The results produced by the combined model are in better agreement with the observed ones than those produced solely by the original 2-D model. The combined model gives much more reliable results for tide-induced residual water level and current.

Subdivision surface modeling system based on arbitrary topological curves network and combined subdivision

Arbitrary topological curve network has no restriction in topology structure,so it has more powerful representing ability in defining complex surfaces.A complex surface modeling system is presented based on arbitrary topological curve network and the improved combined subdivision method,its functions including creating and editing curve network,and generating and modifying curve network＇s interpolated surface.This modeling system can be used to the process of products＇concept design,and its applications is also significant to the development of subdivision method.

Study of establishing disease-syndrome combined with animal model for immune thrombocytopenic purpura without additional conditions

Objective:To explore the feasibility of establishing the disease-syndrome combined animal model for immune thrombocytopenic purpura(ITP)without additional conditions.Methods:Three batches of data related to the ITP model mice obtained by replication at different time were analyzed,and whether the APS-injected model mice replicated through the passive immune modeling method could simulate the pathogenesis and clinical characteristics of human ITP was evaluated according to the differentiation criteria for diseasesyndrome combined model.Results:The APS-injected replicated ITP model mice possessed the following traits:(1)Compared with the normal group,the platelet count was significantly decreased,and coagulation time was significantly increased in the model group(P<.01).(2)Compared with the normal group,the medullary thrombocytogenous megakaryocytes were significantly decreased(P<.05,.01,.001).(3)The APS-injected sites and other parts of the model mice had spontaneous hemorrhage.(4)Behavioral changing signs were observed 1 week after the modeling(i.e.low activity,delayed activity,poor appetite,skin petechia/hemorrhage and spontaneous hemorrhage at the injected sites or other parts),and were getting more and more severe.Conclusion:According to the syndrome differentiation criteria for disease-syndrome combined model of ITP,the APS-injected animal model of ITP replicated through the passive immune modeling method without additional conditions possesses the characteristics of disease-syndrome combined model.It provides an ideal tool for the development of traditional Chinese medicine pharmacology experiment.

Evaluation of the Application Effect of Short Video Combined with BOPPPS Teaching Mode in Clinical Anesthesia Teaching

Objective:To study the application effect of short video combined with BOPPPS teaching mode in clinical anesthesia practice.Method:48 students assigned to clinical anesthesia in digestive endoscopy of Shanxi Bethune Hospital from July 1,2022 to April 1,2023 were selected as research objects.They were randomly divided into the control group(PowerPoint presentation teaching group)and the observation group(short video combined with BOPPPS teaching group),with 24 students in each group.After the internship,the students’theoretical and technical scores were tested,the effects of the two teaching modes were compared,and the students’satisfaction was investigated.Results:The test scores of students in the observation group were significantly better than those in the control group(P<0.05).The short video combined with BOPPPS teaching mode can significantly improve students’learning interest,operation skills,and memory(P<0.05).The students’satisfaction in the observation group was higher than that in the control group(P<0.05).Conclusion:In clinical practice,the application of short video combined with BOPPPS teaching mode has achieved great effect,which is worth further promotion and research.

OPTIMAL MODEL OF COMBINED PHASE CENTER FOR HORN FEEDS AND ITS COMPUTATIONAL METHOD

A definition of combined phase center for horn feeds is given.Formulas of E-planeand H-plane combined phase center for conical horns and the corresponding Optimal model arepresented,and a fast optimization method for solving this model is described.By using thismethod,the phase center of corrugated horn is discussed and calculated,and the variation of thephase center with distance and operating frequency is given.

ARMA-GM combined forewarning model for the quality control

Three forecasting models are set up: the auto\|regressive moving average model, the grey forecasting model for the rate of qualified products P t, and the grey forecasting model for time intervals of the quality catastrophes. Then a combined forewarning system for the quality of products is established, which contains three models, judgment rules and forewarning state illustration. Finally with an example of the practical production, this modeling system is proved fairly effective.

Combined bottleneck effect of on-ramp and bus stop in a cellular automaton model

The combined bottleneck effect is investigated by modeling traffic systems with an on-ramp and a nearby bus stop in a two-lane cellular automaton model. Two cases, i.e. the bus stop locates in the downstream section of the on-ramp and the bus stop locates in the upstream section of the on-ramp, are considered separately. The upstream flux and downstream flux of the main road, as well as the on-ramp flux are analysed in detail, with respect to the entering probabilities and the distance between the on-ramp and the bus stop. It is found that the combination of the two bottlenecks causes the capacity to drop off, because the vehicles entering the main road from the on-ramp would interweave with the stopping （pulling-out） buses in the downstream （upstream） case. The traffic conflict in the former case is much heavier than that in the latter, causing the downstream main road to be utilized inefficiently. This suggests that the bus stop should be set in the upstream section of the on-ramp to enhance the capacity. The fluxes both on the main road and on the on-ramp vary with the distance between the two bottlenecks in both cases. However, the effects of distance disappear gradually at large distances. These findings might give some guidance to traffic optimization and management.

A COMBINED MODEL OF WIND, WAVE, TIDE AND STORM SURGES

A combined numerical model of wind, wave, tide, and storm surges was built on the basis of the “wind field model in limited sea surface areas”. When used to forecast the sea surface wind, wave height and water level, it can describe them very well.

A Combined-Power Model for the Distribution of Axial Force in Shaft Anchor along Its Length

The theoretical results of axial force distribution models differ greatly from tests because of the complication of the rock type material. A three-parameter combined-power model is proposed by curves fitting the test data recorded from the pull tests on anchoring bars used in different engineering projects. Based on the comparison of the mechanical characteristics of shaft anchors and prestressed tendons, a two-parameter combined-power function model for prestressed tendons is proposed. The bounded length derived from the model and the suggested values of the parameters are also proposed. Compared with the Gaussian model, the three-parameter combined-power model is more precise and simple in expression. Results also suggest that the bounded length calculated from the average stress method is not safe enough.

THE TOPOLOGICAL OPTIMIZATION FOR TRUSS STRUCTURES WITH STRESS CONSTRAINTS BASED ON THE EXIST-NULL COMBINED MODEL

A new exist-null combined model is proposed for the structural topology optimization. The model is applied to the topology optimization of the truss with stress constraints. Satisfactory computational result can be obtained with more rapid and more stable convergence as compared with the cross-sectional optimization. This work also shows that the presence of independent and continuous topological variable motivates the research of structural topology optimization.

Improved Approach to Determine the Material Parameters for a Combined Hardening Model

For the simulation of isothermal mechanically loaded components, it is indispensable to have a material model, which describes the material behavior very accurately. In this case, a combined hardening model was chosen in order to reflect the prevalent deformation behavior. The combined hardening model enables simulation independent of the number of load cycles and the chosen strain amplitude. The main point is the declaration of the parameters from the chosen material model. This work deals with the estimation of the parameters. For validation and as input data of the here defined approach low cycle fatigue (LCF) tests were performed on cast aluminum and at 250°C. The comparison of the test results and the simulations indicated that σmax from the simulated hysteresis lies inside a range of ±5% referred to the test results.

Analytical modeling and vibration analysis of fiber reinforced composite hexagon honeycomb sandwich cylindrical-spherical combined shells

This study analyzes and predicts the vibration characteristics of fiberreinforced composite sandwich(FRCS)cylindrical-spherical(CS)combined shells with hexagon honeycomb core(HHC)for the first time based on an analytical model developed,which makes good use of the advantage of the first-order shear deformation theory(FSDT),the multi-segment decomposition technique,the virtual spring technology,the Jacobi-Ritz approach,and the transfer function method.The equivalent material properties of HHC are firstly determined by the modified Gibson’s formula,and the related energy equations are derived for the HHC-FRCS-CS combined shells,from which the fundamental frequencies,the mode shapes,and the forced vibration responses are solved.The current model is verified through the discussion of convergence and comparative analysis with the associated published literature and finite element(FE)results.The effects of geometric parameters of HHC on the dynamic property of the structure are further investigated with the verified model.It reveals that the vibration suppression capability can be greatly enhanced by reducing the ratio of HHC thickness to total thickness and the ratio of wall thickness of honeycomb cell to overall radius,and by increasing the ratio of length of honeycomb cell to overall radius and honeycomb characteristic angle of HHC.

Research on Hydrological Time Series Prediction Based on Combined Model

Water level prediction of river runoff is an important part of hydrological forecasting.The change of water level not only has the trend and seasonal characteristics,but also contains the noise factors.And the water level prediction ability of a single model is limited.Since the traditional ARIMA(Autoregressive Integrated Moving Average)model is not accurate enough to predict nonlinear time series,and the WNN(Wavelet Neural Network)model requires a large training set,we proposed a new combined neural network prediction model which combines the WNN model with the ARIMA model on the basis of wavelet decomposition.The combined model fit the wavelet transform sequences whose frequency are high with the WNN,and the scale transform sequence which has low frequency is fitted by the ARIMA model,and then the prediction results of the above are reconstructed by wavelet transform.The daily average water level data of the Liuhe hydrological station in the Chu River Basin of Nanjing are used to forecast the average water level of one day ahead.The combined model is compared with other single models with MATLAB,and the experimental results show that the accuracy of the combined model is improved by 7%compared with the traditional wavelet network under the appropriate wavelet decomposition function and the combined model parameters.