Optimal Scheduling Method of Cogeneration System with Heat Storage Device Based on Memetic Algorithm

Electric-heat coupling characteristics of a cogeneration system and the operating mode of fixing electricity with heat are the main reasons for wind abandonment during the heating season in the Three North area.To improve the wind-power absorption capacity and operating economy of the system,the structure of the system is improved by adding a heat storage device and an electric boiler.First,aiming at the minimum operating cost of the system,the optimal scheduling model of the cogeneration system,including a heat storage device and electric boiler,is constructed.Second,according to the characteristics of the problem,a cultural gene algorithm program is compiled to simulate the calculation example.Finally,through the system improvement,the comparison between the conditions before and after and the simulation solutions of similar algorithms prove the effectiveness of the proposed scheme.The simulation results show that adding the heat storage device and electric boiler to the scheduling optimization process not only improves the wind power consumption capacity of the cogeneration system but also reduces the operating cost of the system by significantly reducing the coal consumption of the unit and improving the economy of the system operation.The cultural gene algorithm framework has both the global evolution process of the population and the local search for the characteristics of the problem,which has a better optimization effect on the solution.

Two-Stage Optimal Dispatching of Wind Power-Photovoltaic-Solar Thermal Combined System Considering Economic Optimality and Fairness

Aiming at the problems of large-scale wind and solar grid connection,how to ensure the economy of system operation and how to realize fair scheduling between new energy power stations,a two-stage optimal dispatching model of wind power-photovoltaic-solar thermal combined system considering economic optimality and fairness is proposed.Firstly,the first stage dispatching model takes the overall economy optimization of the system as the goal and the principle of maximizing the consumption of wind and solar output,obtains the optimal output value under the economic conditions of each new energy station,and then obtains the maximum consumption space of the new energy station.Secondly,based on the optimization results of the first stage,the second stage dispatching model uses the dispatching method of fuzzy comprehensive ranking priority to prioritize the new energy stations,and then makes a fair allocation to the dispatching of the wind and solar stations.Finally,the analysis of a specific example shows that themodel can take into account the fairness of active power distribution of new energy stations on the basis of ensuring the economy of system operation,make full use of the consumption space,and realize the medium and long-term fairness distribution of dispatching plan.

Hydrodynamic Characteristics of New Floating Wind-Wave Energy Combined Power Generation Devices Under Typhoon-Wave-Current Coupling

The South China Sea is rich in wind and wave energy resources,and the wind-wave combined power generation device is currently in the concept research and development stage.In recent years,extreme sea conditions such as super typhoons have frequently occurred,which poses a serious challenge to the safety of offshore floating platforms.In view of the lack of safety analysis of wind-wave combined power generation devices in extreme sea conditions at present,this paper takes the OC4-WEC combined with semi-submersible wind turbine(Semi-OC4)and the oscillating buoy wave energy converter as the research object,and establishes a mesoscale WRF-SWANFVCOM(W-S-F)real-time coupling platform based on the model coupling Toolkit(MCT)to analyze the spatial and temporal evolution of wind-wave-current in offshore wind farms during the whole process of super typhoon“Rammasun”transit.Combined with the medium/small scale nested method,the flow field characteristics of OC4-WEC platform are analyzed.The results show that the simulation accuracy of the established W-S-F platform for typhoon track is 42.51%higher than that of the single WRF model.Under the action of typhoon-wave-current,the heave motion amplitude of OC4-WEC platform is reduced by 38.1%,the surge motion amplitude is reduced by 26.7%,and the pitch motion amplitude is reduced by 23.4%.

A survey of geothermal power generation combined with renewable energy for low carbon emissions

At present,industrial development is heavily dependent on traditional fossil energy,which has had an increasingly serious impact on the environment.Clean and renewable energy has received extensive attention and its proportion in daily life has gradually increased.As a clean and renewable energy source that is not affected by changes in weather and seasons,geothermal energy has developed rapidly in recent years and has received increasing attention.According to reports,the total installed capacity of geothermal power generation in the world in 2020 was 15950 MW-an increase of~27%over 2015.At the end of 2019,the total installed capacity for global geothermal direct use was 107727 MW-an increase of 52.0%compared with 2015;the total annual energy use was 1020887 TJ(283580 GWh)-an increase of 72.3%over 2015.Through the investigation of geothermal power generation technology in recent years,the characteristics and shortcomings of various power generation methods are analysed.At the same time,this review analyzes the characteristics of geothermal energy and other renewable-energy(solar energy,water energy)coupling power generation,and analyzes the principles and characteristics of geothermal energy and various new-energy coupling power generation methods.Through investigation and analysis,this review provides a complete understanding of various geothermal power generation technologies and provides insights into the future development direction.

Test Generation and Design-for-Testability Based on Acyclic Structure with Hold Registers

We present a method of test generation for acyclic sequential circuits with hold registers. A complete (100% fault efficiency) test sequence for an acyclic sequential circuit can be obtained by applying a combinational test generator to all the maximal time-expansion models (TEMs) of the circuit. We propose a class of acyclic sequential circuits for which the number of maximal TEMs is one, i.e, the maximum TEM exists. For a circuit in the class, test generation can be performed by using only the maximum TEM. The proposed class of sequential circuits with the maximum TEM properly includes several known classes of acyclic sequential circuits such as balanced structures and acyclic sequential circuits without hold registers for which test generation can be also performed by using a combinational test generator. Therefore, in general, the hardware overhead for partial scan based on the proposed structure is smaller than that based on balanced or acyclic sequential structure without hold registers.

Generation of Linear Isolated Sub-60 Attosecond Pulses by Combining a Circularly Polarized Pulse with an Elliptically Polarized Pulse

The two-color circularly polarized pulses scheme was proposed to generate isolated attosecond pulses in our previous work [Phys. Rev. A 87 （2013） 043406], while the polarization of the attosecond pulse was not investigated. We show a supplementary explanation of this scheme and present another scheme to generate linear isolated attosecond pulses by combining a circularly polarized pulse with an elliptically polarized pulse. High-order harmonic generation and quantum path control are investigated to compare these two schemes. Both schemes can obtain supercontinuum spectra plateau from about 200eV to 550eV, which belong to the water window region. It is found that the latter scheme can clearly eliminate the short quantum path and extend the harmonic plateau. A linear isolated attosecond pulse with a duration of sub-6Oas can be generated by superposing a bandwidth of 70eV.

CO_(2)Plume Geothermal(CPG)Systems for Combined Heat and Power Production:an Evaluation of Various Plant Configurations

CO_(2) Plume Geothermal(CPG)systems are a promising concept for utilising petrothermal resources in the context of a future carbon capture utilisation and sequestration economy.Petrothermal geothermal energy has a tremendous worldwide potential for decarbonising both the power and heating sectors.This paper investigates three potential CPG configurations for combined heating and power generation(CHP).The present work examines scenarios with reservoir depths of 4 km and 5 km,as well as required district heating system(DHS)supply temperatures of 70℃ and 90℃.The results reveal that a two-staged serial CHP concept eventuates in the highest achievable net power output.For a thermosiphon system,the relative net power reduction by the CHP option compared with a sole power generation system is significantly lower than for a pumped system.The net power reduction for pumped systems lies between 62.6%and 22.9%.For a thermosiphon system with a depth of 5 km and a required DHS supply temperature of 70℃,the achievable net power by the most beneficial CHP option is even 9.2%higher than for sole power generation systems.The second law efficiency for the sole power generation concepts are in a range between 33.0%and 43.0%.The second law efficiency can increase up to 63.0%in the case of a CHP application.Thus,the combined heat and power generation can significantly increase the overall second law efficiency of a CPG system.The evaluation of the achievable revenues demonstrates that a CHP application might improve the economic performance of both thermosiphon and pumped CPG systems.However,the minimum heat revenue required for compensating the power reduction increases with higher electricity revenues.In summary,the results of this work provide valuable insights for the potential development of CPG systems for CHP applications and their economic feasibility.

Generation/collection mode of SECM with combined probe

Here we report a novel generation/collection operation mode of scanning electrochemical microscopy,in which a theta micropipette was employed to support two adjacent water/1,2-dichloroethane interfaces separated by the thin central glass wall：one acts as the generator while the other as the collector.The generation current,collection current and collection efficiency were enhanced significantly when the tip approached to an insulate substrate.

Diesel generator exhaust heat recovery fully-coupled with intake air heating for off-grid mining operations:An experimental,numerical,and analytical evaluation

The customarily discarded exhaust from the fossil fuel-based power plants of the off-grid mines holds the thermal potential to fulfill the heating requirement of the underground operation.This present research fills in an important research gap by investigating the coupling effect between a diesel exhaust heat recovery and an intake air heating system employed in a remote mine.An integrative approach comprising analytical,numerical,and experimental assessment has been adapted.The novel analytical model developed here establishes the reliability of the proposed mine heating system by providing comparative analysis between a coupled and a decoupled system.The effect of working fluid variation has been examined by the numerical analysis and the possible improvement has been identified.Experimental investigations present a demonstration of the successful lab-scale implementation of the concept and validate the numerical and analytical models developed.Successful deployment of the fully coupled mine heating system proposed here will assist the mining industry on its journey towards energy-efficient,and sustainable mining practices through nearly 70%reduction in fossil fuel consumption for heating intentions.

Schedule for Reducing the Use of Peat and the Possibilities of Replacing It with Forest Chips in Energy Production in Finland

Between 2018 and 2020, an average of 15 TWh of energy peat was consumed in Finland. Energy peat is used in 260 boilers in Finland, which produce district heat and heat and steam for industry, as well as electricity as cogeneration (CHP) in connection with district heating and industrial heat production. Peat accounts for 3% - 5% of the energy sources used in Finland, but its importance has been greater in terms of security of supply. With current use in accordance with the 2018-2020 average, the emissions from peat are almost 6 Mt CO2 per year in Finland, which is 15% of emissions from the energy sector. In this study, the technical limitations related to peat burning, economic limitations related to the availability of biomass, and socio-economic limitations related to the regional economy are reviewed. By 2040, the technical minimum use of peat will fall to 2 TWh. The techno-economical potential may be even lower, but due to socio-economic objectives, peat production will not be completely ceased. The reduction in the minimum share assumes that old peat boilers are replaced with new biomass boilers or are alternatively replaced by other forms of heat production. Based on the biomass reserves, the current use of peat can be completely replaced by forest chips, but regional challenges may occur along the coast and in southern Finland. It is unlikely that the current demand for all peat will be fully replaced by biomass when part of CHP production is replaced by heat production alone and combustion with waste heat sources.

Generation of ApoE deficient dogs via combination of embryo injection of CRISPR/Cas9 with somatic cell nuclear transfer

Atherosclerotic cardiovascular disease is the leading cause of death in the world which is resulted from complex interactions among multiple genetic and environmental factors （WHO）. Athero- sclerosis is a chronic inflammatory disease characterized by accumulation of lipids in the arterial wall （Gofman and Lindgren, 1950）. Tremendous clinical and experimental efforts have been made to reveal the pathogenesis of the disease. Nevertheless, the mechanism of atherosclerosis is still unclear. A suitable animal model to study metabolic disorders and subsequent atherosclerosis is a necessity. The traditional method by feeding high fat diet to establish animal models of atherosclerosis disease is time- consuming and laborious, and in many circumstances, the pheno- types are not consistent among the individual models.

A Complete Critical Path Algorithm for Test Generation of Combinational Circuits

It is known that critical path test generation method is not a complete algorithm for combinational circuits with reconvergent-fanout.In order to make it a complete algorithm,we put forward a reconvergent-fanout- oriented technique,the principal critical path algorithm,propagating the critical value back to primary inputs along a single path,the principal critical path,and allowing multiple path sensitization if needed.Relationship among test patterns is also discussed to accelerate test generation.

Pseudo-Random Test Generation for Large Combinational Circuits

In this paper,a simulation system of pseudo-random testing is described first to investigate the characteristics of pseudo-random testing.Several interesting experimental results are obtained.It is found out that initial states of pseudo-random sequences have little effect on fault coverage.Fixed connection between LFSR outputs and circuit inputs in which the number of LFSR stages m is less than the number of circuit inputs n leads to low fault coverage,and the fault coverage is reduced as m decreases.The local unrandomness of pseudo-random sequences is exposed clearly.Generally,when an LFSR is employed as a pseudo-random generator,there are at least as many LFSR stages as circuit inputs.However,for large circuits under test with hundreds of inputs,there are drawbacks of using an LFSR with hundreds of stages.In the paper,a new design for a pseudo-random pattern generator is proposed in which m<n.The relationship between test length and the number of LFSR stages is discussed in order to obtain necessary,fault coverage.It is shown that the design cannot only save LFSR hardware but also reduce test length without loss of fault coverage,and is easy to implement. The experimental results are provided for the 10 Benchmark Circuits to show the effectiveness of the generator.

FROM LOW-ENERGY TO NET ZERO-ENERGY BUILDINGS: STATUS AND PERSPECTIVES

“Net Zero-Energy Building”has become a popular catchphrase to describe the synergy between energy-efficient building and renewable energy utilisation to achieve a balanced energy budget over an annual cycle.Taking into account the energy exchange with a grid overcomes the limitations of energy-autonomous buildings with the need for seasonal energy storage on-site.Although the expression,“Net Zero-Energy Building,”appears in many energy policy documents,a harmonised definition or a standardised balancing method is still lacking.This paper reports on the background and the various effects influencing the energy balance approach.After discussing the national energy code framework in Germany,a harmonised terminology and balancing procedure is proposed.The procedure takes not only the energy balance but also energy efficiency and load matching into account.