The scaling of the flowfield in a gas gas combustion chamber is investigated theoretically, numerically and experimentally. To obtain the scaling criterion of the gas-gas combustion flowfield, formulation analysis of ...The scaling of the flowfield in a gas gas combustion chamber is investigated theoretically, numerically and experimentally. To obtain the scaling criterion of the gas-gas combustion flowfield, formulation analysis of the threedimensional (3D) Navier-Stokes equations for a gaseous multi-component mixing reaction flow is conducted and dimensional analysis on the gas gas combustion phenomena is also carried out. The criterion implies that the size and the pressure of the gas gas combustion chamber can be changed. Based on the criterion, multi-element injector chambers with different geometric sizes and at different chamber pressures ranging from 3 MPa to 20 MPa are numerically simulated. A multi-element injector chamber is designed and hot-fire tested at five chamber pressures from 1.64 MPa to 3.68 MPa. Wall temperature measurements are used to understand the similarity of combustion flowfields in the tests. The results have verified the similarities between combustion flowfields under different chamber pressures and geometries, with the criterion applied.展开更多
The effects of cooled external exhaust gas recirculation (EGR) on the combustion and emission performance of diesel fuel homogeneous charge compression ignition (HCCI) are studied. Homogeneous mixture is formed by...The effects of cooled external exhaust gas recirculation (EGR) on the combustion and emission performance of diesel fuel homogeneous charge compression ignition (HCCI) are studied. Homogeneous mixture is formed by injecting fuel in-cylinder in the negative valve overlap (NVO) period. So, the HCCI combustion which has low NOx and smoke emission is achieved. Cooled external EGR can delay the start of combustion effectively, which is very useful for high cetane fuel (diesel) HCCI, because these fuels can easily self-ignition, which makes the start of combustion more early. External EGR can avoid the knock combustion of HCCI at high load which means that the EGR can expand the high load limit. HCCI maintains low smoke emission at various EGR rate and various load compared with conventional diesel engine because there is no fuel-rich area in cylinder.展开更多
C/SiC composites prepared by chemical vapor infiltration(CVI) were subjected to a stationary loading of 160 MPa in a combustion gas environment with flame temperature of 1300 ℃.Lifetime of C/SiC composites in such ...C/SiC composites prepared by chemical vapor infiltration(CVI) were subjected to a stationary loading of 160 MPa in a combustion gas environment with flame temperature of 1300 ℃.Lifetime of C/SiC composites in such environment was measured.Microstructures of the composites after the testing were also characterized by SEM.The experimental results indicate the lifetime of C/SiC composites is average 2.3 hours in combustion gas environments.The combustion gas flow accelerates the damage of carbon fibers and the failure of the composites by speeding up the diffusion of gas reactants and products,destroying the layer of SiO2 on the surface of SiC coating and bringing fused SiO2 inside the composites.The fracture face of C/SiC is uneven,i e,a flat area close to the windward side and a pulling-out of long fibers near the leeward side,which results from the directionality effect of the combustion gas flow.展开更多
We propose a numerical methodology for the simultaneous numerical simulation of four states of matter:gas,liquid,elastoplastic solids,and plasma.The distinct,interacting physical processes are described by a combinati...We propose a numerical methodology for the simultaneous numerical simulation of four states of matter:gas,liquid,elastoplastic solids,and plasma.The distinct,interacting physical processes are described by a combination of compressible,inert,and reactive forms of the Euler equations,multi-phase equations,elastoplastic equations,and resistive MHD equations.Combinations of systems of equations are usually solved by coupling finite element for solid modelling and CFD models for fluid modelling or including material effects through boundary conditions rather than full material discretisation.Our simultaneous solution methodology lies on the recasting of all the equations in the same,hyperbolic form allowing their solution on the same grid with the same finite volume numerical schemes.We use a combination of sharp-and diffuse-interface methods to track or capture material interfaces,depending on the application.The communication between the distinct systems of equations(i.e.,materials separated by sharp interfaces)is facilitated by means of mixed-material Riemann solvers at the boundaries of the systems,which represent physical material boundaries.To this end,we derive approximate mixed-material Riemann solvers for each pair of the above models based on characteristic equations.To demonstrate the applicability of the new methodology,we consider a case study,where we investigate the possibility of ignition of a combustible gas that lies over a liquid in a metal container that is struck by a plasma arc akin to a lightning strike.We study the effect of the metal container material and its conductivity on the ignition of the combustible gas,as well as the effects of an additional dielectric coating,the sensitivity of the gas,and differences between scenarios with sealed and pre-damaged metal surfaces.展开更多
The effects of magnesium/polytetrafluoroethylene(Mg/PTFE)pyrotechnic compositions on the coupled flow field and reignition mechanism are important aspects governing the perfommance and range of base bleed projectiles(...The effects of magnesium/polytetrafluoroethylene(Mg/PTFE)pyrotechnic compositions on the coupled flow field and reignition mechanism are important aspects governing the perfommance and range of base bleed projectiles(BBPs).Owing to a decrease in pressure and temperature when the BBP leaves the muzzle,rapid depressurization occurs,which extinguishes the base bleed propellant.The Mg/PTFE py-rotechnic composition pressed in the igniter of the base bleed unit(BBU)provides additional energy to the BBU via a chemical reaction.Thus,the extinguished base bleed propellant is reignited under the effect of high-temperature combustion gas jets from the igniter.In this study,a numerical analysis is conducted to evaluate the effects of PTFE and Mg granularity as well as Mg/PTFE pyrotechnic compo-sitions.Owing to the rapid depressurization,the temperature and pressure was found to decrease fordifferent Mg/PIFE pyrotechnic compositions.However,the depressurization time increased as the PTFE granularity increased,the Mg granularity decreased,and the Mg content increased.When the pressure in the combustion chamber of the BBU decreased to the atmospheric pressure,the combustion gas jets from the igniter expand upstream(rather than downstream).However,these combustion gas jets exhibit different axial and radial expansion characteristics depending on the pyrotechnic compositions used,The results show that the reignition delay time,ta,of the base bleed propellant was 377.608,94.27,387.243,523.966,and 221.094 ms for cases A-E,respectively.Therefore,it was concluded that the Mg/PTFE pyrotechnic composition of case B was the most beneficial for the reignition of the base bleed propellant,with the earliest addition of energy and mass to the BBP.展开更多
To deal with the problem of how to control the interior ballistic stability in the bulk-loaded liquid propellant gun, the expansion and mixing process of the twin combustion-gas jets with high temperature and pressure...To deal with the problem of how to control the interior ballistic stability in the bulk-loaded liquid propellant gun, the expansion and mixing process of the twin combustion-gas jets with high temperature and pressure in a liquid medium is studied in the cylindrical filling liquid chamber. A series of the jet expansion shapes is obtained by using a high-speed photographic system. The influences of the jet pressure on the jet expansion shape are discussed. Based on the experiments, the three-dimensional mathematical model is established. The expansion processes of the twin gas jets in the liquid medium are simulated by means of fluent to get the pressure, density, temperature, velocity contours and evolutionary process of vortices. Results show that the jet external out-line and tops are all irregular. The Kelvin-Helmholtz instability is shown in the whole expansion process. The numerical simulation results of the axial displacement of the twin gas jets in liquid agree well with the experiment.展开更多
Coherent jets are widely used in electric are furnace (EAF) steelmaking to increase the oxygen utilization and chemical reaction rates. However, the influence of fuel gas combustion on jet behavior is not fully unde...Coherent jets are widely used in electric are furnace (EAF) steelmaking to increase the oxygen utilization and chemical reaction rates. However, the influence of fuel gas combustion on jet behavior is not fully understood yet. The flow and combustion characteristics of a coherent jet were thus investigated at steelmaking temperature using Fluent software, and a detailed chemical kinetic reaction mecha- nism was used in the combustion reaction model. The axial velocity and total temperature of the supersonic jet were measured via hot state experiments. The simulation results were compared with the experimental data and the empirical jet model proposed by Ito and Muchi and good consistency was obtained. The research results indicated that the potential core length of the coherent jet can be prolonged by optimizing the combustion effect of the fuel gas. Besides, the behavior of the supersonic jet in the subsonic section was also investigated, as it is an important factor for controlling the position of the oxygen lance. The investigation indicated that the attenuation of the coherent jet is more notable than that of the conventional jet in the subsonic section.展开更多
基金Project supported by the National High Technology Research and Development Program of China (Grant No. 2007AA7023)the Innovation Foundation of BUAA for Ph.D Graduates (Grant No. 430569)
文摘The scaling of the flowfield in a gas gas combustion chamber is investigated theoretically, numerically and experimentally. To obtain the scaling criterion of the gas-gas combustion flowfield, formulation analysis of the threedimensional (3D) Navier-Stokes equations for a gaseous multi-component mixing reaction flow is conducted and dimensional analysis on the gas gas combustion phenomena is also carried out. The criterion implies that the size and the pressure of the gas gas combustion chamber can be changed. Based on the criterion, multi-element injector chambers with different geometric sizes and at different chamber pressures ranging from 3 MPa to 20 MPa are numerically simulated. A multi-element injector chamber is designed and hot-fire tested at five chamber pressures from 1.64 MPa to 3.68 MPa. Wall temperature measurements are used to understand the similarity of combustion flowfields in the tests. The results have verified the similarities between combustion flowfields under different chamber pressures and geometries, with the criterion applied.
基金This project is supported by National Basic Research Program of China (973Program, No. 2001CB209205)National Natural Science Foundation ofChina (No. 50406016)
文摘The effects of cooled external exhaust gas recirculation (EGR) on the combustion and emission performance of diesel fuel homogeneous charge compression ignition (HCCI) are studied. Homogeneous mixture is formed by injecting fuel in-cylinder in the negative valve overlap (NVO) period. So, the HCCI combustion which has low NOx and smoke emission is achieved. Cooled external EGR can delay the start of combustion effectively, which is very useful for high cetane fuel (diesel) HCCI, because these fuels can easily self-ignition, which makes the start of combustion more early. External EGR can avoid the knock combustion of HCCI at high load which means that the EGR can expand the high load limit. HCCI maintains low smoke emission at various EGR rate and various load compared with conventional diesel engine because there is no fuel-rich area in cylinder.
基金Funded by the Natural Science Foundation of China (No. 50820145202)the Natural Science Basic Research Plan in Shanxi Province of China(No.2009JQ6005)
文摘C/SiC composites prepared by chemical vapor infiltration(CVI) were subjected to a stationary loading of 160 MPa in a combustion gas environment with flame temperature of 1300 ℃.Lifetime of C/SiC composites in such environment was measured.Microstructures of the composites after the testing were also characterized by SEM.The experimental results indicate the lifetime of C/SiC composites is average 2.3 hours in combustion gas environments.The combustion gas flow accelerates the damage of carbon fibers and the failure of the composites by speeding up the diffusion of gas reactants and products,destroying the layer of SiO2 on the surface of SiC coating and bringing fused SiO2 inside the composites.The fracture face of C/SiC is uneven,i e,a flat area close to the windward side and a pulling-out of long fibers near the leeward side,which results from the directionality effect of the combustion gas flow.
基金This work was supported by Jaguar Land Rover and the UK-EPSRC Grant EP/K014188/1 as part of the jointly funded Programme for Simulation Innovation and Boeing Research&Technology(BR&T)Grant SSOW-BRT-L0516-0569.
文摘We propose a numerical methodology for the simultaneous numerical simulation of four states of matter:gas,liquid,elastoplastic solids,and plasma.The distinct,interacting physical processes are described by a combination of compressible,inert,and reactive forms of the Euler equations,multi-phase equations,elastoplastic equations,and resistive MHD equations.Combinations of systems of equations are usually solved by coupling finite element for solid modelling and CFD models for fluid modelling or including material effects through boundary conditions rather than full material discretisation.Our simultaneous solution methodology lies on the recasting of all the equations in the same,hyperbolic form allowing their solution on the same grid with the same finite volume numerical schemes.We use a combination of sharp-and diffuse-interface methods to track or capture material interfaces,depending on the application.The communication between the distinct systems of equations(i.e.,materials separated by sharp interfaces)is facilitated by means of mixed-material Riemann solvers at the boundaries of the systems,which represent physical material boundaries.To this end,we derive approximate mixed-material Riemann solvers for each pair of the above models based on characteristic equations.To demonstrate the applicability of the new methodology,we consider a case study,where we investigate the possibility of ignition of a combustible gas that lies over a liquid in a metal container that is struck by a plasma arc akin to a lightning strike.We study the effect of the metal container material and its conductivity on the ignition of the combustible gas,as well as the effects of an additional dielectric coating,the sensitivity of the gas,and differences between scenarios with sealed and pre-damaged metal surfaces.
基金This work was supported by the Fundamental Research Funds for the Central Universities(No.30918011324).
文摘The effects of magnesium/polytetrafluoroethylene(Mg/PTFE)pyrotechnic compositions on the coupled flow field and reignition mechanism are important aspects governing the perfommance and range of base bleed projectiles(BBPs).Owing to a decrease in pressure and temperature when the BBP leaves the muzzle,rapid depressurization occurs,which extinguishes the base bleed propellant.The Mg/PTFE py-rotechnic composition pressed in the igniter of the base bleed unit(BBU)provides additional energy to the BBU via a chemical reaction.Thus,the extinguished base bleed propellant is reignited under the effect of high-temperature combustion gas jets from the igniter.In this study,a numerical analysis is conducted to evaluate the effects of PTFE and Mg granularity as well as Mg/PTFE pyrotechnic compo-sitions.Owing to the rapid depressurization,the temperature and pressure was found to decrease fordifferent Mg/PIFE pyrotechnic compositions.However,the depressurization time increased as the PTFE granularity increased,the Mg granularity decreased,and the Mg content increased.When the pressure in the combustion chamber of the BBU decreased to the atmospheric pressure,the combustion gas jets from the igniter expand upstream(rather than downstream).However,these combustion gas jets exhibit different axial and radial expansion characteristics depending on the pyrotechnic compositions used,The results show that the reignition delay time,ta,of the base bleed propellant was 377.608,94.27,387.243,523.966,and 221.094 ms for cases A-E,respectively.Therefore,it was concluded that the Mg/PTFE pyrotechnic composition of case B was the most beneficial for the reignition of the base bleed propellant,with the earliest addition of energy and mass to the BBP.
基金Project support by the National Science Foundation of China(Grant No.50776048)
文摘To deal with the problem of how to control the interior ballistic stability in the bulk-loaded liquid propellant gun, the expansion and mixing process of the twin combustion-gas jets with high temperature and pressure in a liquid medium is studied in the cylindrical filling liquid chamber. A series of the jet expansion shapes is obtained by using a high-speed photographic system. The influences of the jet pressure on the jet expansion shape are discussed. Based on the experiments, the three-dimensional mathematical model is established. The expansion processes of the twin gas jets in the liquid medium are simulated by means of fluent to get the pressure, density, temperature, velocity contours and evolutionary process of vortices. Results show that the jet external out-line and tops are all irregular. The Kelvin-Helmholtz instability is shown in the whole expansion process. The numerical simulation results of the axial displacement of the twin gas jets in liquid agree well with the experiment.
基金support by the National Natural Science Foundation of China(NSFC 51474024and 51334001)National Key Technology Research and Development Program of the 12th Five-year Plan of China(12FYP 2015BAF03B01)
文摘Coherent jets are widely used in electric are furnace (EAF) steelmaking to increase the oxygen utilization and chemical reaction rates. However, the influence of fuel gas combustion on jet behavior is not fully understood yet. The flow and combustion characteristics of a coherent jet were thus investigated at steelmaking temperature using Fluent software, and a detailed chemical kinetic reaction mecha- nism was used in the combustion reaction model. The axial velocity and total temperature of the supersonic jet were measured via hot state experiments. The simulation results were compared with the experimental data and the empirical jet model proposed by Ito and Muchi and good consistency was obtained. The research results indicated that the potential core length of the coherent jet can be prolonged by optimizing the combustion effect of the fuel gas. Besides, the behavior of the supersonic jet in the subsonic section was also investigated, as it is an important factor for controlling the position of the oxygen lance. The investigation indicated that the attenuation of the coherent jet is more notable than that of the conventional jet in the subsonic section.