ECSRE Analysis on Late Comer Strategy for Folk Custom Eco-tourism of Southeast Chongqing in the New Normal State

The development of late comers in the new normal state is a practical and urgent issue to be tackled by underdeveloped areas of China in current situation.The development strategy of late comers is economic development strategy different from economically developed areas.Five element strategic analysis model(ECSRE) stresses intrinsic features of things,which is favorable for making clear weakness of late comers and suitable for southeast Chongqing.With the aid of the ECSRE,on the basis of analyzing resources and external conditions,this paper made an in-depth analysis on late comer strategy for southeast Chongqing from the perspective of industry pattern attribute,development stages,individual characters and thinking pattern of decision-makers.It stresses regional cooperation,unified restriction,dislocation characteristics,institutional simulation and innovation and improving policy system,to stimulate strengths of late comers,so as to promote long-term rapid and sustainable development of folk custom eco-tourism in southeast Chongqing.

结合空域不变量的变换域零水印二次检测方案

利用变换域水印技术对诸如压缩、滤波等信号处理具有较好鲁棒性的优点,结合空域中对几何变换具有抵抗力的常量来构造与检测零水印。实验证明,方案对剪切、数模转换处理、滤波、噪声、JPEG压缩、旋转等图像处理具有较强的鲁棒性。

一种新颖的彩色水印图像几何失真校正算法

几何攻击是制约水印技术实用性的重要因素,当图像经过旋转、缩放和DA转换等几何变换后,绝大多数水印算法的检测器将失效。该文提出一种新的基于计算机视觉理论的图像空域特征重同步算法,首次采用图像的corner中心角和corner中心距离对水印图像几何失真进行失真校正。实验证明,算法性能良好、校正精度高、可以有效地校正大强度几何失真。

Numerical Computation of Stress Intensity Factors for Bolt-hole Corner Crack in Mechanical Joints

The three-dimensional finite element method is used to solve the problem of the quarter-elliptical comer crack of the bolt-hole in mechanical joints being subjected to remote tension. The square-root stress singularity around the corner crack front is simulated using the collapsed 20-node quarter point singular elements. The contact interaction between the bolt and the hole boundary is considered in the finite element analysis. The stress intensity factors （SIFs） along the crack front are evaluated by using the displacement correlation technique. The effects of the amount of clearance between the hole and the bolt on the SIFs are investigated. The numerical results indicate that the SIF for mode I decrease with the decreases in clearance, and in the cases of clearance being present, the corner crack is in a mix-mode, even if mode I loading is dominant.

一种基于角点特征的数字稳像算法研究

针对复杂背景情况,提出一种基于角点特征的车载视频图像序列数字稳像算法.采用改进的Harris算子提取特征点,根据三级匹配策略实现对应点的匹配;建立参考图像与当前图像的映射关系,采用最小二乘解得到图像帧间的全局运动参数;最后利用Kalman滤波平滑运动参数,实现帧间的实时运动补偿,达到稳像目的.实验结果表明该方法去除了高频抖动,较好的保留了摄像机的主动运动,稳像后的视频具有良好的视觉效果.

建筑的生命之躯——现代墙的细部解析

墙作为建筑的主体构件,它不仅是结构的承重实体,同时也是人类文化思想的细部载体。以墙体的细部设计作为论述对象,对它在当今的意义以重新诠释,并给予归纳与梳理,从而更加清晰的了解在现代新建筑、新材料以及新技术的影响下,传统建筑构件的细部设计已发生着变化,以此从中领略建筑细部的新内涵。

一种快速有效的水印图像几何失真校正算法

为解决水印图像在受到几何攻击后水印无法被有效检测的问题,利用图像的空域不变信息实现对水印图像几何失真的校正,提出一种快速有效的水印图像重同步算法,算法能够有效校正水印图像的旋转失真和放缩失真。实验证明,算法性能良好。

Phase equilibria in Mg-rich corner of Mg-Ca-RE(RE=Gd,Nd) systems at 400℃

The phase equilibria in Mg-rich corner of Mg-Ca-Gd and Mg-Ca-Nd ternary systems at 400℃ were determined through the equilibrated alloy method by using XRD, SEM, EPMA and DSC. Partial isothermal sections in Mg-rich corner of Mg-Ca-Gd and Mg-Ca-Nd ternary systems at 400 ℃ were constructed from 13 alloys. A three-phase region of a-Mg, Mg41RE5 and Mg2Ca was determined in both ternary systems. It is formed by a similar ternary eutectic reaction L→a-Mg＋Mg2Ca＋Mg41RE5 at 499.6 ℃ and 505.6 ℃, respectively. It is found that the maximum solubility of Ca in Mg5Gd is 3.68% （molar fraction） and 3% of Gd can be dissolved in Mg2Ca in the Mg-Ca-Gd system at 400 ℃. While in the Mg-Ca-Nd system, the maximum solubility of Ca in Mg41Nd5 is 3.57% and 1.24% of Nd can be dissolved in Mg2Ca at 400 ℃. Other three-phase equilibria existing in Mg-rich corner of Mg-Ca-Gd system are a-Mg＋MgsGd＋T and MgsGd＋Mg2Ca＋T and the three-phase equilibrium in Mg-rich corner of Mg-Ca-Nd system is Mg3Nd＋Mg2Ca＋ Mg41Nd5.

Die structure optimization of equal channel angular extrusion for AZ31 magnesium alloy based on finite element method

Three-dimensional（3D） geometric models with different comer angles （90° and 120°） and with or without inner round fillets in the bottom die were designed. Some important process parameters were regarded as the calculation conditions used in DEFORMTM-3D software, such as stress--strain data of compression test for AZ31 magnesium, temperatures of die and billet, and friction coefficient. Influence of friction coefficient on deformation process was discussed. The results show that reasonable lubrication condition is important to plastic deformation. The change characteristics for distributions of effective stress and strain during an equal channel angular extrusion （ECAE） process with inner angle of 90° and without fillets at outer comer were described. Inhomogeneity index （C） was defined and deformation heterogeneity of ECAE was analyzed from the simulation and experiment results. The deformation homogeneity caused by fillets at outer comer increased compared with the die without fillets. The cumulated maximum strains decrease with increasing the fillets of outer comer in ECAE die and the inner comer angle. The analysis results show that better structures of ECAE die including appropriate outer comer fillet and the inner comer angle of 90° for the die can improve the strain and ensure plastic deformation homogenization to a certain extent. The required extrusion force drops with increasing the fillet made at outer comer in ECAE die. It is demonstrated that the prediction results are in good agreement with experiments and the theoretical calculation and the research conclusions in literatures.

Time series ground subsidence inversion in mining area based on CRInSAR and PSInSAR integration

The subsidence of the mining area was monitored by analyzing the phase of permanent scatters （PS） which maintained high coherence in magnitude of SAR images.A hew method of spatial unwrapping was presented which used the subsidence rates calculated on comer reflector （CR） points as constraints for PS network to perform the spatial unwrapping using the parametric adjustment method.The algorithm achieved the integration of CR data and PSInSAR algorithm.The colliery dense distributed area around Baisha reservoir was chosen as the study area in the experiment.The time series of subsidence from February in 2007 to February in 2010 is successfully inversed by using the periodic function to simulate the linear and nonlinear components of the deformation.The simulation results show that the accuracy can be ± 2.1 mm with the leveling data being used as the external validation data.

Development of a 170-mm hollow corner cube retroreflector for the future lunar laser ranging

Over the past 50 years, lunar laser ranging has made great contributions to the understanding of the Earth–Moon system and the tests of general relativity. However, because of the lunar libration, the Apollo and Lunokhod corner-cube retroreflector（CCR） arrays placed on the Moon currently limit the ranging precision to a few centimeters for a single photon received. Therefore, it is necessary to deploy a new retroreflector with a single and large aperture to improve the ranging precision by at least one order of magnitude. Here we present a hollow retroreflector with a 170-mm aperture fabricated using hydroxide-catalysis bonding technology. The precisions of the two dihedral angles are achieved by the mirror processing with a sub-arc-second precision perpendicularity, and the remaining one is adjusted utilizing an auxiliary optical configuration including two autocollimators. The achieved precisions of the three dihedral angles are 0.10 arcsecond,0.30 arc-second, and 0.24 arc-second, indicating the 68.5% return signal intensity of ideal Apollo 11/14 based on the far field diffraction pattern simulation. We anticipate that this hollow CCR can be applied in the new generation of lunar laser ranging.

Study on Internal Supersonic Flows with Pseudo-shock Wave Using Liquid Crystal Flow Visualization Method

The flow visualization technique using shear-sensitive liquid crystal is applied to the investigation of a Mach 2 internal supersonic flow with pseudo-shock wave （PSW） in a pressure-vacuum supersonic wind tunnel. It provides qualitative information mainly concerning the overall flow structure, such as the turbulent boundary layer separation, reattachment locations and the dimensionalities of the flow. Besides, it can also give understanding of the surface streamlines, vortices in separation region and the corner effect of duct flow. Two kinds of crystals with different viscosities are used in experiments to analyze the viscosity effect. Results are compared with schlieren picture, confirming the effectiveness of liquid crystal in flow-visualization.

Stress drop assessment of the August 8, 2017, Jiuzhaigou earthquake sequence and its tectonic implications

By using a broadband Lg attenuation model developed for the Tibetan Plateau,we isolate source terms by removing attenuation and site effects from the observed Lg-wave displacement spectra of the M 7.0 earthquake that occurred on August 8,2017,in Jiuzhaigou,China,and its aftershock sequence.Thus,the source parameters,including the scalar seismic moment,comer frequency and stress drop,of these events can be further estimated.The estimated stress drops vary from 47.1 kPa to 7149.6 kPa,with a median value of 59.4 kPa and most values falling between 50 kPa and 75 kPa.The estimated stress drops show significant spatial variations.Lower stress drops were mainly found close to the mainshock and on the seismogenic fault plane with large coseismic slip.In contrast,the highest stress drop was 7.1 MPa for the mainshock,and relatively large stress drops were also found for aftershocks away from the major seismogenic fault and at depths deeper than the zone with large coseismic slip.By using a statistical method,we found self-similarity among some of the aftershocks with a nearly constant stress drop.In contrast,the stress drop increased with the seismic moment for other aftershocks.The amount of stress released during earthquakes is a fundamental characteristic of the earthquake rupture process.As such,the stress drop represents a key parameter for improving our understanding of earthquake source physics.

New templates of CNN for extracting corners of objects in gray-scale images

A new cellular neural network (CNN) with nonlinear templates is presented forextracting convex corners of objects in gray-scale images. Application examples showed that the newCNN can even detect convex corner characteristics of objects in images with Gaussian noise.

Corner strength enhancement of high strength cold-formed steel at normal room and elevated temperatures

In this study, the suitability of current design methods for the 0.2% proof yield strength of the comer regions for high strength cold-formed steel at normal room temperature was investigated. The current standard predictions are generally accurate for outer comer specimen but conservative for inner comer specimen. Based on the experimental results, an analytical model to predict the comer strength of high strength cold-formed steel at normal room temperature was also proposed. The comparison indicated that the proposed model predicted well the comer strength of high strength cold-formed steel not only at normal room temperature but also at elevated temperatures. It is shown that the predictions obtained from the proposed model agree well with the test results. Generally the comer strength enhancement of high strength cold-formed steel decreases when the temperature increases.

The Stress Combination Method for the Fatigue Assessment of the Hatch Corner of a Bulk Carrier Based on Equivalent Waves

The stress combination method for the fatigue assessment of the hatch comer of a bulk carrier was investigated based on equivalent waves. The principles of the equivalent waves of ship structures were given, including the determination of the dominant load parameter, heading, frequency, and amplitude of the equivalent regular waves. The dominant load parameters of the hatch comer of a bulk carrier were identified by the structural stress response analysis, and then a series of equivalent regular waves were defined based on these parameters. A combination method of the structural stress ranges under the different equivalent waves was developed for the fatigue analysis. The combination factors were obtained by least square regression analysis with the stress ranges derived from spectral fatigue analysis as the target value. The proposed method was applied to the hatch comer of another bulk carrier as an example. This shows that the results from the equivalent wave approach agree well with those from the spectral fatigue analysis. The workload is reduced substantially. This method can be referenced in the fatigue assessment of the hatch comer of a bulk carrier.

High-speed corner detection based on fuzzy ID3 decision tree

A high-speed comer detection algorithm based on fuzzy ID3 decision tree was proposed. In the algorithm, the Bresenham circle with 3-pixel radius was used as the test mask, overlapping the candidate comers with the nucleus. Connected pixels on the circle were applied to compare the intensity value with the nucleus, with the membership function used to give the fuzzy result. The pixel with maximum information gain was chosen as the parent node to build a binary decision tree. Thus, the comer detector was derived. The pictures taken in Fengtai Railway Station in Beijing were used to test the method. The experimental results show that when the number of pixels on the test mask is chosen to be 9, best result can be obtained. The comer detector significantly outperforms existing detector in computational efficiency without sacrificing the quality and the method also provides high performance against Poisson noise and Gaussian blur.

Computation of Capacitance for MEMS Comb-Drive Structures

According to the characteristics of comb-drive structures, the electrical potential field is analyzed; the model based on comer capacitor is presented and solved with the capacitance characteristic formula of nonlinear capacitor. Compared with the results of finite element method simulation, the model based on comer capacitor is more accurate than the models based on infinite parallel plate capacitor and parallel plate capacitor with edge effects.

Corner crack mechanism of boron-containing LCAK steel slabs

At Baoshan Iron ＆ Steel Co., Ltd., comer cracks of boron containing LCAK steel slabs had caused remarkable quality loss and mass flow disorder. With the help of fractography and thermodynamics analysis, the embrittlement mechanism of this steel grade was studied and the results are as follows： 1 The transformation from 3＇ to a starts at the austenite grain boundaries and a layer of thin ferrite film gradually forms around the austenite grains. Strain concentration will preferentially start inside the ferrite phase when the stress accumulates to a certain level. 2 The coarse BN particles acceleratedly precipitated at the γ/α interfaces further deteriorate the ductility of the ferrite film, and brittleness results in strain concentration and microvoid coalescence inside the ferrite film. Therefore the austenite grain boundaries are prone to intergranular failure. 3 The stoichiometry among Al, N and B is a very important factor influencing the hot ductility of this steel grade. By controling the B-to-N atomic ratio to above 1, all N can be fixed by B instead of A1. Thus coarsegrained steel is available and fewer grain boundaries and higher ductility can reduce the risk of comer cracks. （4） By adjusting the B-to-N atomic ratio,Baoshan Iron ＆ Steel Co.,Ltd. successfully reduced the number of cracks to nearly one tenth of that in the past and the hot tensile tests confirmed remarkable improvement in the hot ductility of this steel.