The flow visualization technique using shear-sensitive liquid crystal is applied to the investigation of a Mach 2 internal supersonic flow with pseudo-shock wave （PSW） in a pressure-vacuum supersonic wind tunnel. It...The flow visualization technique using shear-sensitive liquid crystal is applied to the investigation of a Mach 2 internal supersonic flow with pseudo-shock wave （PSW） in a pressure-vacuum supersonic wind tunnel. It provides qualitative information mainly concerning the overall flow structure, such as the turbulent boundary layer separation, reattachment locations and the dimensionalities of the flow. Besides, it can also give understanding of the surface streamlines, vortices in separation region and the corner effect of duct flow. Two kinds of crystals with different viscosities are used in experiments to analyze the viscosity effect. Results are compared with schlieren picture, confirming the effectiveness of liquid crystal in flow-visualization.展开更多
The Spalart-Allmaras （S-A） turbulence model, the shear-stress transport （SST） turbulence model and their compressibility corrections are revaluated for hypersonic compression comer flows by using high-order differ...The Spalart-Allmaras （S-A） turbulence model, the shear-stress transport （SST） turbulence model and their compressibility corrections are revaluated for hypersonic compression comer flows by using high-order difference schemes. The compressibility effect of density gradient, pressure dilatation and turbulent Mach number is accounted. In order to reduce confusions between model uncertainties and discretization errors, the formally fifth-order explicit weighted compact nonlinear scheme （WCNS-E-5） is adopted for convection terms, and a fourth-order staggered central difference scheme is applied for viscous terms. The 15° and 34° compression comers at Mach number 9.22 are investigated. Numerical results show that the original SST model is superior to the original S-A model in the resolution of separated regions and predictions of wall pressures and wall heat-flux rates. The capability of the S-A model can be largely improved by blending Catris＇ and Shur＇s compressibility corrections. Among the three corrections of the SST model listed in the present paper, Catris＇ modification brings the best results. However, the dissipation and pressure dilatation corrections result in much larger separated regions than that of the experiment, and are much worse than the original SST model as well as the other two corrections. The correction of turbulent Mach number makes the separated region slightly smaller than that of the original SST model. Some results of low-order schemes are also presented. When compared to the results of the high-order schemes, the separated regions are smaller, and the peak wall pressures and peak heat-flux rates are lower in the region of the reattachment points.展开更多
文摘The flow visualization technique using shear-sensitive liquid crystal is applied to the investigation of a Mach 2 internal supersonic flow with pseudo-shock wave （PSW） in a pressure-vacuum supersonic wind tunnel. It provides qualitative information mainly concerning the overall flow structure, such as the turbulent boundary layer separation, reattachment locations and the dimensionalities of the flow. Besides, it can also give understanding of the surface streamlines, vortices in separation region and the corner effect of duct flow. Two kinds of crystals with different viscosities are used in experiments to analyze the viscosity effect. Results are compared with schlieren picture, confirming the effectiveness of liquid crystal in flow-visualization.
基金Foundation items： National Basic Research Program of China （2009CB723801） National Natural Science Foundation of China （11072259）
文摘The Spalart-Allmaras （S-A） turbulence model, the shear-stress transport （SST） turbulence model and their compressibility corrections are revaluated for hypersonic compression comer flows by using high-order difference schemes. The compressibility effect of density gradient, pressure dilatation and turbulent Mach number is accounted. In order to reduce confusions between model uncertainties and discretization errors, the formally fifth-order explicit weighted compact nonlinear scheme （WCNS-E-5） is adopted for convection terms, and a fourth-order staggered central difference scheme is applied for viscous terms. The 15° and 34° compression comers at Mach number 9.22 are investigated. Numerical results show that the original SST model is superior to the original S-A model in the resolution of separated regions and predictions of wall pressures and wall heat-flux rates. The capability of the S-A model can be largely improved by blending Catris＇ and Shur＇s compressibility corrections. Among the three corrections of the SST model listed in the present paper, Catris＇ modification brings the best results. However, the dissipation and pressure dilatation corrections result in much larger separated regions than that of the experiment, and are much worse than the original SST model as well as the other two corrections. The correction of turbulent Mach number makes the separated region slightly smaller than that of the original SST model. Some results of low-order schemes are also presented. When compared to the results of the high-order schemes, the separated regions are smaller, and the peak wall pressures and peak heat-flux rates are lower in the region of the reattachment points.
