Power Splitting Behavior of Star Gearing Based on Deformation Compatibility

The deformation compatibility equations and the torque balance equations of star gearing with three branches have been found based on the characteristic that the system composes a closed-loop of power flow. In consideration of the parts manufacturing errors, assembly errors, bearing stiffness and float, the power splitting rate of each star gear and the system were calculated by using the theory of equivalent mesh error. The effects of the errors, float and the bearing stiffness on power splitting were studied. The study provides a useful theoretical guideline for the design of star gearing.

Kineto-static analysis of a novel high-speed parallel manipulator with rigid-flexible coupled links

A novel high-speed parallel kinematic machine （PKM） named Delta-S parallel manipulator is proposed, which consists of a fixed base connected to a moving platform through three limbs with identical topology. Each limb is composed of one driving ann and one follower arm, herein, the latter includes two strings and one middle rod, all located in a same plane. Compared with similar manipulators with uniform parameters, the novel and unique topology as well as the addition of two strings of Delta-S manipulator can remove the clearance of the spherical joints, reduce the inertial load of components further, improve the positioning accuracy and dynamic performance, and so on. In order to formulate the kineto-static model of Delta-S manipulator, the kineto-static analyses and models of the driving arm, the generalized follower and the moving platform can be carried out by the D＇ALEMBERT principle. For the sake of obtaining the force analytic results of strings, the deformation compatibility condition of strings and the middle rod are determined. Furthermore, in virtue of the assumption of small deformation and the linear superposition principle, the minimal pre-tightening force of the strings is calculated. The main results include that the loads of the strings and the middle rod must be larger than ＂zero＂ and the pre-tightening force over the workspace must be larger than the minimal pre-tightening force at any time within the workspace, which lay the foundation for the dynamic analysis and the prototype manufacture of the Delta-S manipulator.

Dynamic Analysis and Optimal Parameter Design of FlexibleComposite Structures via Absolute Nodal Coordinate Formulation

The composite structure with the dielectric elastomer and soft materials is the main form of theactuators in soft robots. However, the theoretical model is hard to obtain due to the nonlinear large deformationof materials. In this paper, a new composite element model is established based on the absolute nodal coordinateformulation. The consistent deformation conditions at the contact interface between two thin plates are deduced.The hyperelastic constitutive model and the dielectric elastomer constitutive model are introduced for the twothin plates. Then the dynamic model is established to study the dynamic behaviors of the composite flexiblestructure with various parameters. The results show that the nonlinear deformation appears obviously whenthe flexible composite plate structure is driven by various voltages, and the warping deformation becomes moreobvious with the increase of the voltage. The width and thickness of the driven thin plate influence the stabilityof the whole structure. With the decrease of the width or thickness, the deformation of the structure is moreconsistent with obvious periodicity, and the control performance is improved. Finally, the structural parametersof the composite structures are optimized to improve the control performance based on the dynamic performance.Additionally, smaller width and thickness parameters are preferred to obtain better performance in the design offlexible actuator of soft robot.