When linearizing three-dimensional(3 D)coordinate similarity transformation model with large rotations,we usually encounter the ill-posed normal matrix which may aggravate the instability of solutions.To alleviate the...When linearizing three-dimensional(3 D)coordinate similarity transformation model with large rotations,we usually encounter the ill-posed normal matrix which may aggravate the instability of solutions.To alleviate the problem,a series of conversions are contributed to the 3 D coordinate similarity transformation model in this paper.We deduced a complete solution for the 3 D coordinate similarity transformation at any rotation with the nonlinear adjustment methodology,which involves the errors of the common and the non-common points.Furthermore,as the large condition number of the normal matrix resulted in an intractable form,we introduced the bary-centralization technique and a surrogate process for deterministic element of the normal matrix,and proved its benefit for alleviating the condition number.The experimental results show that our approach can obtain the smaller condition number to stabilize the convergence of the interested parameters.Especially,our approach can be implemented for considering the errors of the common and the non-common points,thus the accuracy of the transformed coordinates improves.展开更多
The rigid-plastic assumption has greatly simplified the theoretical analysis of dynamic plastic response of structures.Within this framework,a common tool is the modal technique using approximate independent yield cri...The rigid-plastic assumption has greatly simplified the theoretical analysis of dynamic plastic response of structures.Within this framework,a common tool is the modal technique using approximate independent yield criteria,which leads to upper-and lower-bound solutions,but usually with poor accuracy.In this paper,by utilizing the membrane factor method(MFM),the large-deflection dynamic plastic response of square plates subjected to exponentially decaying pulse loading is analyzed by taking both the transient response phase and the exact yield criterion into account.Based on the combination of saturation analysis(SA)and MFM,the complete solutions and regressive formulae of saturated deflection and saturated impulse are obtained.As the dynamic behavior of plates under rectangular pulse loading serves as a benchmark of pulse-equivalent techniques,the large plastic deformation of square plates under short-duration rectangular pulse is also analyzed in detail.Moreover,by comparing the SA results of pulse-loaded square plates with different boundary conditions,it is found that the saturated deflection and saturated impulse of the fully clamped and simply supported square plates both increase linearly with the pulse amplitude,and the slopes are approximately the same,so the conversion between the SA quantities of plates with different boundary conditions can be easily achieved.展开更多
Production of fines together with reservoir fluid is called solid production. It varies from a few grams or less per ton of reservoir fluid posing only minor problems, to catastrophic amount possibly leading to erosio...Production of fines together with reservoir fluid is called solid production. It varies from a few grams or less per ton of reservoir fluid posing only minor problems, to catastrophic amount possibly leading to erosion and complete filling of the borehole. This paper assesses solid production potential in a carbonate gas reservoir located in the south of Iran. Petrophysical logs obtained from the vertical well were employed to construct mechanical earth model. Then, two failure criteria, i.e. Mohre Coulomb and Mogi-Coulomb,were used to investigate the potential of solid production of the well in the initial and depleted conditions of the reservoir. Using these two criteria, we estimated critical collapse pressure and compared them to the reservoir pressure. Solid production occurs if collapse pressure is greater than pore pressure. Results indicate that the two failure criteria show different estimations of solid production potential of the studied reservoir. Mohre Coulomb failure criterion estimated solid production in both initial and depleted conditions, where Mogi-Coulomb criterion predicted no solid production in the initial condition of reservoir. Based on Mogi-Coulomb criterion, the well may not require completion solutions like perforated liner, until at least 60% of reservoir pressure was depleted which leads to decrease in operation cost and time.展开更多
基金supported by the National Natural Science Foundation of China,Nos.41874001 and 41664001Support Program for Outstanding Youth Talents in Jiangxi Province,No.20162BCB23050National Key Research and Development Program,No.2016YFB0501405。
文摘When linearizing three-dimensional(3 D)coordinate similarity transformation model with large rotations,we usually encounter the ill-posed normal matrix which may aggravate the instability of solutions.To alleviate the problem,a series of conversions are contributed to the 3 D coordinate similarity transformation model in this paper.We deduced a complete solution for the 3 D coordinate similarity transformation at any rotation with the nonlinear adjustment methodology,which involves the errors of the common and the non-common points.Furthermore,as the large condition number of the normal matrix resulted in an intractable form,we introduced the bary-centralization technique and a surrogate process for deterministic element of the normal matrix,and proved its benefit for alleviating the condition number.The experimental results show that our approach can obtain the smaller condition number to stabilize the convergence of the interested parameters.Especially,our approach can be implemented for considering the errors of the common and the non-common points,thus the accuracy of the transformed coordinates improves.
基金the support of the Wuhan University of Technology start-up fund for Distinguished Professors(No.471-40120163)the China Scholarship Council(CSC).
文摘The rigid-plastic assumption has greatly simplified the theoretical analysis of dynamic plastic response of structures.Within this framework,a common tool is the modal technique using approximate independent yield criteria,which leads to upper-and lower-bound solutions,but usually with poor accuracy.In this paper,by utilizing the membrane factor method(MFM),the large-deflection dynamic plastic response of square plates subjected to exponentially decaying pulse loading is analyzed by taking both the transient response phase and the exact yield criterion into account.Based on the combination of saturation analysis(SA)and MFM,the complete solutions and regressive formulae of saturated deflection and saturated impulse are obtained.As the dynamic behavior of plates under rectangular pulse loading serves as a benchmark of pulse-equivalent techniques,the large plastic deformation of square plates under short-duration rectangular pulse is also analyzed in detail.Moreover,by comparing the SA results of pulse-loaded square plates with different boundary conditions,it is found that the saturated deflection and saturated impulse of the fully clamped and simply supported square plates both increase linearly with the pulse amplitude,and the slopes are approximately the same,so the conversion between the SA quantities of plates with different boundary conditions can be easily achieved.
文摘Production of fines together with reservoir fluid is called solid production. It varies from a few grams or less per ton of reservoir fluid posing only minor problems, to catastrophic amount possibly leading to erosion and complete filling of the borehole. This paper assesses solid production potential in a carbonate gas reservoir located in the south of Iran. Petrophysical logs obtained from the vertical well were employed to construct mechanical earth model. Then, two failure criteria, i.e. Mohre Coulomb and Mogi-Coulomb,were used to investigate the potential of solid production of the well in the initial and depleted conditions of the reservoir. Using these two criteria, we estimated critical collapse pressure and compared them to the reservoir pressure. Solid production occurs if collapse pressure is greater than pore pressure. Results indicate that the two failure criteria show different estimations of solid production potential of the studied reservoir. Mohre Coulomb failure criterion estimated solid production in both initial and depleted conditions, where Mogi-Coulomb criterion predicted no solid production in the initial condition of reservoir. Based on Mogi-Coulomb criterion, the well may not require completion solutions like perforated liner, until at least 60% of reservoir pressure was depleted which leads to decrease in operation cost and time.