The stability and parameters of a bio-ceramic filter for completely autotrophic nitrogen removal were investigated. The completely autotrophic nitrogen removal over nitrite （CANON） reactor was fed with different con...The stability and parameters of a bio-ceramic filter for completely autotrophic nitrogen removal were investigated. The completely autotrophic nitrogen removal over nitrite （CANON） reactor was fed with different concentrations of ammonia （400, 300, and 200 mg N/L） but constant influent ammonia load. The results showed that the CANON system can achieve good treatment performance at ambient temperature （15-23℃）. The average removal rate and removal loading of NH4＋-N and TN was 83.90%, 1.26 kg N/（m3.day）, and 70.14%, 1.09 kg N/（m3.day）, respectively. Among the influencing factors like pH, dissolved oxygen and alkalinity, it was indicated that the pH was the key parameter of the performance of the CANON system. Observing the variation of pH would contribute to better control of the CANON system in an intuitive and fast way. Denaturing gradient gel electrophoresis analysis of microorganisms further revealed that there were some significant changes in the community structure of ammonium oxidizing bacteria, which had low diversity in different stages, while the species of anaerobic ammonium oxidizing （anammox） bacteria were fewer and the community composition was relatively stable. These observations showed that anaerobic ammonia oxidation was more stable than the aerobic ammonia oxidation, which could explain that why the CANON system maintained a good removal efficiency under the changing substrate conditions.展开更多
In this study,three sequential batch biofilm reactors(SBBRs)were operated for 155 days to evaluate the performance of completely autotrophic nitrogen removal over nitrite(CANON)process under different aeration modes a...In this study,three sequential batch biofilm reactors(SBBRs)were operated for 155 days to evaluate the performance of completely autotrophic nitrogen removal over nitrite(CANON)process under different aeration modes and dissolved oxygen(DO).Synthetic wastewater with 160-mg NH_(4)^(+)-N/L was fed into the reactors.In the continuously-aerated reactor,the efficiency of the ammonium nitrogen conversion and total nitrogen(TN)removal reached 80% and 70%,respectively,with DO between 0.8–1.0 mg/L.Whereas in the intermittently-aerated reactor,at the aeration/non-aeration ratio of 1.0,ammonium was always under the detection limit and 86% of TN was removed with DO between 2.0–2.5 mg/L during the aeration time.Results show that CANON could be achieved in both continuous and intermittent aeration pattern.However,to achieve the same nitrogen removal efficiency,the DO needed in the intermittently-aerated sequential batch biofilm reactor(SBBR)during the aeration period was higher than that in the continuously-aerated SBBR.In addition,the DO in the CANON system should be adjusted to the aeration mode,and low DO was not a prerequisite to CANON process.展开更多
基金supported by the Trans-Century Training Program Foundation for Talents from the Ministry of Education of China (No. NCET-10-0008)the Open Project of State Key Laboratory of Urban Water Resource and Environment,Harbin Institute of Technology (No.QAK201005)the National Water Pollution Control and Management Technology Major Projects (No.2012ZX07202-005)
文摘The stability and parameters of a bio-ceramic filter for completely autotrophic nitrogen removal were investigated. The completely autotrophic nitrogen removal over nitrite （CANON） reactor was fed with different concentrations of ammonia （400, 300, and 200 mg N/L） but constant influent ammonia load. The results showed that the CANON system can achieve good treatment performance at ambient temperature （15-23℃）. The average removal rate and removal loading of NH4＋-N and TN was 83.90%, 1.26 kg N/（m3.day）, and 70.14%, 1.09 kg N/（m3.day）, respectively. Among the influencing factors like pH, dissolved oxygen and alkalinity, it was indicated that the pH was the key parameter of the performance of the CANON system. Observing the variation of pH would contribute to better control of the CANON system in an intuitive and fast way. Denaturing gradient gel electrophoresis analysis of microorganisms further revealed that there were some significant changes in the community structure of ammonium oxidizing bacteria, which had low diversity in different stages, while the species of anaerobic ammonium oxidizing （anammox） bacteria were fewer and the community composition was relatively stable. These observations showed that anaerobic ammonia oxidation was more stable than the aerobic ammonia oxidation, which could explain that why the CANON system maintained a good removal efficiency under the changing substrate conditions.
基金This study was supported by the National Natural Science Foundation of China(Grant No.50608071)the Key Grant Project of Ministry of Education of China(Grant No.308020)+1 种基金Chongqing University Postgraduates’Science and Innovation Fund(No.200801A1A0180277)Specialized Research Fund for the Doctoral Program of Higher Education of China(Grant No.20050611010).
文摘In this study,three sequential batch biofilm reactors(SBBRs)were operated for 155 days to evaluate the performance of completely autotrophic nitrogen removal over nitrite(CANON)process under different aeration modes and dissolved oxygen(DO).Synthetic wastewater with 160-mg NH_(4)^(+)-N/L was fed into the reactors.In the continuously-aerated reactor,the efficiency of the ammonium nitrogen conversion and total nitrogen(TN)removal reached 80% and 70%,respectively,with DO between 0.8–1.0 mg/L.Whereas in the intermittently-aerated reactor,at the aeration/non-aeration ratio of 1.0,ammonium was always under the detection limit and 86% of TN was removed with DO between 2.0–2.5 mg/L during the aeration time.Results show that CANON could be achieved in both continuous and intermittent aeration pattern.However,to achieve the same nitrogen removal efficiency,the DO needed in the intermittently-aerated sequential batch biofilm reactor(SBBR)during the aeration period was higher than that in the continuously-aerated SBBR.In addition,the DO in the CANON system should be adjusted to the aeration mode,and low DO was not a prerequisite to CANON process.
