Energy Band Structure of Alq_3/TCAQ Heterostructure Complex Film Determined by Surface Photovoltage Spectroscopy(SPS)

8-Hydroxyquinoling aluminum (Alq3) and 11, 11, 12, 12-tetracyano-9, 10-anthraquino dimethane(TCAQ) monolayer films and their heterostructure complex films were prepared by a vacuum deposition method. By means of surface photovoltage spectroscopy (SPS) and electric field-induced surface photovoltage spectroscopy (EFISPS), the band gaps of TCAQ and Alq3 monolayer films and the properties of the Alq3/TCAQ bilayer film were investigated. By analysing the mechanism and the results of the SPS and the EFISPS, a reasonable energy band structure of the Alq3/TCAQ complex film was roughly determined.

Preparation and Properties of Cereal-Metal Complex Films

1 Results Various kinds of biodegradable polymer materials have been researched[1]. In our previous papers,cereals such as wheat,buckwheat,glutinous rice and nonglutinous rice were polycondenced with citric acid and polysilicic acid to prepare copolymer films respectively[2,3].These copolymer fims have relatively good mechanical properties but the water proofness is not so good.Recently,some cereals such as wheat,glutinous rice,nonglutinous rice,kaoliang,millet and maize were reacted with copper chlorid...

Langmuir-Blodgett Films from Schiff Base Aluminium (Ⅲ) Complex

The characteristics of the LB films of Schiff base aluminium(Ⅲ), tris(2-hydroxy-5-nitro-N-dodecyl-benzylideneaminato) aluminium(Ⅲ)[Al(TA12)_3], were studied. The surface pressure-area(π-A) isotherm of Al(TA12)_3 in the pure water subphase was investigated. The molecular area, 0.48 nm^2, is one-third of the expected value that indicates the formation of an aggregate. The Langmuir-Blodgett(LB) films of Al(TA12)_3 were transferred and characterized. The UV-Vis spectra and the AFM image both confirmed that the J-aggregates formed. The polarized UV-Vis spectra indicated that the complex plane had to be oriented with an angle of about 30° to the substrate surface. The IR spectra suggested that the complexation took place between aluminium ions and the oxygen atoms of the ligand rather than the nitrogen atom.

Resistive humidity sensor based on vanadium complex films

A resistive-type relative humidity （RH） sensor based on vanadium complex （VO2（3-f[）） film is reported in this study. Gold electrodes were deposited on the glass substrates in a co-planar structure. A thin film of vanadium complex was coated as a humidity-sensing material on the top of the pre-patterned electrodes. The humidity-sensing principle of the sensor was based on the conductivity change of coated sensing element upon adsorption/desorption of water vapor. The resistance of the humidity sensor measured at 1 kHz decreased linearly with increasing the humidity in the range of 35%-70% RH. The overall resistance of the sensor decreases 11 times. An equivalent circuit for the VO2（3-fl） based resistive-type humidity sensor was developed. The properties of the sensor studied in this work make it beneficial for use in the instruments for environmental monitoring of humidity.

The Aggregates in LB Films of Schiff base Aluminium (III) Complex

The surface pressure-area (pi -A) isotherm of Schiff base aluminium (III), tris (2-hydroxy-5-nitro-N-dodecyl-benzylideneaminato) aluminium (III) (denoted as Al(TAl2)(3)), on pure water subphase was investigated. The molecular area, 0.48 nm(2), is one-third of expected value that indicated the aggregation took place. The Langmuir-Blodgett (LB) films of Al(TAl2), was transferred and characterized. The AFM image confirmed the formation of aggregates.

THE MECHANISM OF SURFACE METALLIZATION OF POLYVINYL ALCOHOL COMPLEX METAL CHELATE FILMS

A novel method for preparing metalllzed film has been studied.The reduction process and properties of the poly(vinyl alcohol)(PVA)were probed by several analytic means.According to the etudies,a mechanism for the polymer surface reduction metallization was proposed and proved.

Study on Alternating LB Films of Charge-Transfer Complex of Octadecyl-TCNQ and Copper Phthalocyanine Derivative

Infrared spectra of alternating LB films of octadecyl-TCNQ/CuPc are studied. Charge-transfer complexes are formed in LB films and conductance increases about three orders than that of pure CuPc LB films.

Luminescent Properties of Europium Complexes with Different Long Chains in Langmuir-Blodgett (LB) Films

A series of europium(III) complexes with different chain length, tris [2-m-pyridylmethanamido-5-phenyl- (1,3,4)-oxadiazole] mono [2-(4-n-alkylphenyl)-iminazole (4,5-f)-1,10-phenanthroline] Eu(III) [Eu(PMA)3Nn (n = 6, 10, 14,18)] were synthesized. All of these amphiphilic europium(III) complexes could form stable Langmuir film at air/water interface and could be transferred onto hydrophilic quartz and mica substrates by measurement of UV spectra in which the absorbance of the LB films at about 288 nm scales showed the linearity with the number of layers deposited. In order to investigate relation between fluorescence properties and the arrangement of molecular in LB films, surface topography of monolayer films were observed by atomic force microscopy (AFM). Results showed that the emission spectra have Eu(III) characteristic peaks and strong emission strength. It is interesting that the molecular with looser arrangement in LB films has better monochromacity, which illustrated that energy might transferred more easily from ligand to Eu(III) in loosen structure films.

Strongly Fluorescent LB Film of a Ternary Europium Complex

Tris (thenoyltrifluoroacetonato) mono(9-octadecylamino-4,5-diazafluorene) europium (III) was synthesized. Stable floating monolayer on pure water subphase (18 degrees C, pH 5.6) was obtained with a collapse pressure of 40 mN/m and a zero-pressure area of 0.495 nm(2) molecule(-1). The monolayers can be transferred onto hydrophilically treated substrates of quartz, calcium fluoride at a surface pressure of 25 mN/m with a transfer ratio of ca. unity. The films were characterized by UV, IR and fluorescent spectroscopy.

Luminescent Thin Film of Doped Terbium Complex Obtained by Sol-Gel Method

The transparent luminescent thin films of doped terbium complex were obtained by sol gel method. The result indicates that rare earth carboxylates with poor solubility can be homogeneously doped into sol matrix in situ. The fluorescence spectra show that the thin film material emits the characteristic narrow band emission of Tb 3+ under the UV excitation.

Numerical Calculation of Viscous-Elastic Fluid Flooding Residual Oil Film in the Complex Pore

In order to analyze the stress and deformation of different permeability of residual oil film in the complex pore, which are affected by the viscous-elasticity of the fluid, the hydrodynamic displacement mechanism is explored from the stand-point of hydrodynamics, that is, the residual oil film displaced by alternating injection of different concentrations of the polymer solution, viscous-elastic fluid flow equation is established in the complex pore by choosing continuity equation, motion equation and the upper convected Maxwell constitutive equation. The flow field is computed by using the method of numerical analysis. Not only the stress and deformation of residual oil film on the different permeability of micro pores, but also the analysis of the flooding mechanism of alternating injection of different concentrations of the polymer solution is got. The results show that the larger the viscous-elasticity of polymer solution is, the bigger the normal deviatoric stress acting on the residual oil film is;the distribution of normal deviatoric stress has the abrupt change. The stronger the viscous-elasticity of the polymer solution is, the bigger the horizontal stress difference acting on the residual oil film is and the more obvious the deformation is;the high-concentration polymer solution is suitable for high-permeability micro pores. Low-concentration polymer solution is suitable for medium and low-permeability micro pores. Alternating injection of polymer solution can improve Volumetric Sweep Efficiency and increase the deformation of residual oil film, which is conducive to enhancing oil recovery.

STUDIES ON LANGMUIR-BLODGETT FILM OF METAL COMPLEXES(Ⅰ)-PREPARATION AND CHARACTERIZATION OF THE LB FILM OF N-HEXADECYL PYRIDINIUM TETRAKIS(1-PHENYL-3-METHYL-4-BENZOYL-PYRAZOL-5-ONE)EUROPIUM,C_5H_5NC_(16)H_(33)Eu(PMBP)_4

The LB film of the title complex was prepared by dropping a benzene solution of the title complex on the surfaceof water subphase at 25±1℃.The film was deposited in Z type on various hydrophilic pretreated substrates ofquartz,CaF;and electronic conductive glass for different purposes.The π-A curve of the film shows that thecross section per molecule is 125;,which indicates that the alkyl chain of the molecule is basically perpendiculalto the surface of the substrate.UV,IR spectra and transmission electronic microscopy of the film were also obtained.

Modifying factor for determining broadband complex permeability of magnetic thin films

A new method of the modifying factor for determining the broadband complex permeability of magnetic thin films,was proposed. Based on the measurement technology of shot-end microstrip line and the new modify factor,a series of FeCo-based magnetic thin films deposited on the oxidized silicon substrates and with an in-plane uniaxial anisotropy were measured in the frequency range of 0.5-5 GHz. The results fit well with the Landau-Lifchitz-Gilbert theory in a broad frequency range.

Preparation and Characterization of Ternary Europium ComplexDoped Thin SolGel Hybrid Film by Fluorescence Spectroscopy

Ternary europium complex with dibenzoylmethane(DBM)and 1,10phenanthroline(phen)was insitu synthesized in thin SiO2/polyvinyl butyral(PVB)hybrid films by a twostep solgel process and characterized by means of fluorescence spectroscopy.The luminescence spectra,fluorescence lifetimes and photostability were all investigated.The results showed that the hybrid films exhibited the characteristic emission bands of the central rare earth Eu3+.In addition,Eu3+presented longer fluorescence lifetime than in an ethanol solution and the complex had a higher photostability in the hybrid film than in the PVB film containing the corresponding pure complex.

Preparation and Properties of Copper Fine Wire on Polyimide Film in Air by Laser Irradiation and Mixed-Copper-Complex Solution Containing Glyoxylic Acid Copper Complex and Methylamine Copper Complex

Formation of copper wiring on a polyimide film by laser irradiation to a stable copper-complex film consisting of glyoxylic acid copper complex and methylamine copper complex in air has been investigated. A stable metallic copper on the polyimide film was precipitated even in air. Since this copper was generated only in the laser-irradiated parts, direct patterning of copper wiring was possible. It was also found that copper was precipitated by electroless copper plating on the laser-deposited copper wiring and it was possible to thicken the copper wiring by this precipitation. The resistivity of the copper wiring was almost the same as that of the bulk of metallic copper. The developed method—combining laser irradiation to a copper-complex-coated film and electroless copper plating—enables the high-speed deposition of fine copper wiring on a polyimide film in air by a printing process, indicating an inexpensive and useful process for fabricating copper wiring without high vacuum facility and heat-treatment under inert gas.

Measurement Method of the Thickness Uniformity for Polymer Films

Several methods for investigating the thickness uniformity of polymer thin films are presented as well as their measurement principles. A comparison of these experimental methods is given.The cylindrical lightwave reflection method is found to can obtain the thickness distribution along a certain direction.It is a simple and suitable method to evaluate the film thickness uniformity.

Machining characteristics of complex prism pattern on electroplated roll by copper

The BLU (back light unit) is the core component of the LCD for notebook, mobile-phone, navigation, as well as large sized TV, PID (public information display), etc. In order to enhance optical efficiency of LCD, optical films with the uniform prism patterns have been used for BLU by stacking two films up orthogonally. In this case, light interference-phenomenon occurred such as Morie, wet-out, u-turning, etc. It caused several problems such as low brightness, spots and stripes in LCD. Recently, the high-luminance micro complex prism patterns are actively studied to avoid the light interference-phenomenon and enhance the optical efficiency. In this study, the roll master to manufacture complex micro prism pattern film was machined by using the high precision lathe. The machined patterns on the roll master were 50, 45, 40, 35, 30, 25, 20, 15, 10 and 5 μm in the pitch with 25.0, 22.5, 20.0, 17.5, 15.0, 12.5, 10.0, 7.5, 5.0 and 2.5 μm in the peak height, respectively. The roll was 2 000 mm in length and 320 mm in diameter. The electroplated roll by copper and the natural single crystal diamond tool was used for machining the patterns. The cutting force was measured and analyzed for each cutting condition by using the dynamometer. The chips and the surfaces after being machined were analyzed by SEM and microscope.

Preparation, Microstructure and Magnetic Properties of NiZn Ferrite Thin Films by Spin Spray Plating

NiZn ferrite thin fihns were performed on glass substrates of 85 ℃ by spin spray plating method. X-ray diffraction patterns of the films show that the samples have a cubic spinel structure with no extra lines corresponding to any other phases between 75 ℃ and 85 ℃. As the pH value of oxidizing solution increases to 8.3, the saturation magnetization increases to 3.13 × 10^5 A/m and resistivity to 127 m Ω ·cm. Film deposited at pH 7.8 has a smooth surface and definite columnar structure. The large wavy flakes were observed at pH 8.3. The high real part of complex permeability μ′ up to 36.1 and the imaginary part μ″ up to 53.2 were observed at 0.5 GHz by short microstrip line perturbation method. The μ″ of thin film has values higher than 20 at the frequencies between 0.5 GHz and 2 GHz, the film is a promising anti-noise material for high frequency applications,