Optimizing Average Electric Power During the Charging of Lithium-Ion Batteries Through the Taguchi Method

In recent times, lithium-ion batteries have been widely used owing to their high energy density, extended cycle lifespan, and minimal self-discharge rate. The design of high-speed rechargeable lithium-ion batteries faces a significant challenge owing to the need to increase average electric power during charging. This challenge results from the direct influence of the power level on the rate of chemical reactions occurring in the battery electrodes. In this study, the Taguchi optimization method was used to enhance the average electric power during the charging process of lithium-ion batteries. The Taguchi technique is a statistical strategy that facilitates the systematic and efficient evaluation of numerous experimental variables. The proposed method involved varying seven input factors, including positive electrode thickness, positive electrode material, positive electrode active material volume fraction, negative electrode active material volume fraction, separator thickness, positive current collector thickness, and negative current collector thickness. Three levels were assigned to each control factor to identify the optimal conditions and maximize the average electric power during charging. Moreover, a variance assessment analysis was conducted to validate the results obtained from the Taguchi analysis. The results revealed that the Taguchi method was an eff ective approach for optimizing the average electric power during the charging of lithium-ion batteries. This indicates that the positive electrode material, followed by the separator thickness and the negative electrode active material volume fraction, was key factors significantly infl uencing the average electric power during the charging of lithium-ion batteries response. The identification of optimal conditions resulted in the improved performance of lithium-ion batteries, extending their potential in various applications. Particularly, lithium-ion batteries with average electric power of 16 W and 17 W during charging were designed and simulated in the range of 0-12000 s using COMSOL Multiphysics software. This study efficiently employs the Taguchi optimization technique to develop lithium-ion batteries capable of storing a predetermined average electric power during the charging phase. Therefore, this method enables the battery to achieve complete charging within a specific timeframe tailored to a specificapplication. The implementation of this method can save costs, time, and materials compared with other alternative methods, such as the trial-and-error approach.

Solving Multi-Objective Linear Programming Problem by Statistical Averaging Method with the Help of Fuzzy Programming Method

A multi-objective linear programming problem is made from fuzzy linear programming problem. It is due the fact that it is used fuzzy programming method during the solution. The Multi objective linear programming problem can be converted into the single objective function by various methods as Chandra Sen’s method, weighted sum method, ranking function method, statistical averaging method. In this paper, Chandra Sen’s method and statistical averaging method both are used here for making single objective function from multi-objective function. Two multi-objective programming problems are solved to verify the result. One is numerical example and the other is real life example. Then the problems are solved by ordinary simplex method and fuzzy programming method. It can be seen that fuzzy programming method gives better optimal values than the ordinary simplex method.

Studies on Stochastic Parametric Roll of Ship with Stochastic Averaging Method

The paper studies the parametric stochastic roll motion in the random waves.The differential equation of the ship parametric roll under random wave is established with considering the nonlinear damping and ship speed.Random sea surface is treated as a narrow-band stochastic process,and the stochastic parametric excitation is studied based on the effective wave theory.The nonlinear restored arm function obtained from the numerical simulation is expressed as the approximate analytic function.By using the stochastic averaging method,the differential equation of motion is transformed into Ito’s stochastic differential equation.The steady-state probability density function of roll motion is obtained,and the results are validated with the numerical simulation and model test.

Quantum generative adversarial networks based on a readout error mitigation method with fault tolerant mechanism

Readout errors caused by measurement noise are a significant source of errors in quantum circuits,which severely affect the output results and are an urgent problem to be solved in noisy-intermediate scale quantum(NISQ)computing.In this paper,we use the bit-flip averaging(BFA)method to mitigate frequent readout errors in quantum generative adversarial networks(QGAN)for image generation,which simplifies the response matrix structure by averaging the qubits for each random bit-flip in advance,successfully solving problems with high cost of measurement for traditional error mitigation methods.Our experiments were simulated in Qiskit using the handwritten digit image recognition dataset under the BFA-based method,the Kullback-Leibler(KL)divergence of the generated images converges to 0.04,0.05,and 0.1 for readout error probabilities of p=0.01,p=0.05,and p=0.1,respectively.Additionally,by evaluating the fidelity of the quantum states representing the images,we observe average fidelity values of 0.97,0.96,and 0.95 for the three readout error probabilities,respectively.These results demonstrate the robustness of the model in mitigating readout errors and provide a highly fault tolerant mechanism for image generation models.

COMPLEX INNER PRODUCT AVERAGING METHOD FOR CALCULATING NORMAL FORM OF ODE

This paper puts forward a complex inner product averaging method for calculating normal form of ODE. Compared with conventional averaging method, the theoretic analytical process has such simple forms as to realize computer program easily. Results can be applied in both autonomous and non-autonomous systems. At last, an example is resolved to verify the method.

Stability of average acceleration method for structures with nonlinear damping

The energy approach is used to theoretically verify that the average acceleration method （AAM）, which is unconditionally stable for linear dynamic systems, is also unconditionally stable for structures with typical nonlinear damping, including the special case of velocity power type damping with a bilinear restoring force model. Based on the energy approach, the stability of the AAM is proven for SDOF structures using the mathematical features of the velocity power function and for MDOF structures by applying the virtual displacement theorem. Finally, numerical examples are given to demonstrate the accuracy of the theoretical analysis.

Average vector field methods for the coupled Schrdinger KdV equations

The energy preserving average vector field （AVF） method is applied to the coupled Schr6dinger-KdV equations. Two energy preserving schemes are constructed by using Fourier pseudospectral method in space direction discretization. In order to accelerate our simulation, the split-step technique is used. The numerical experiments show that the non-splitting scheme and splitting scheme are both effective, and have excellent long time numerical behavior. The comparisons show that the splitting scheme is faster than the non-splitting scheme, but it is not as good as the non-splitting scheme in preserving the invariants.

Probability distribution of wind power volatility based on the moving average method and improved nonparametric kernel density estimation

In the process of large-scale,grid-connected wind power operations,it is important to establish an accurate probability distribution model for wind farm fluctuations.In this study,a wind power fluctuation modeling method is proposed based on the method of moving average and adaptive nonparametric kernel density estimation(NPKDE)method.Firstly,the method of moving average is used to reduce the fluctuation of the sampling wind power component,and the probability characteristics of the modeling are then determined based on the NPKDE.Secondly,the model is improved adaptively,and is then solved by using constraint-order optimization.The simulation results show that this method has a better accuracy and applicability compared with the modeling method based on traditional parameter estimation,and solves the local adaptation problem of traditional NPKDE.

The Method of Calculating Average Skidding Distance

By analyzing the existing average skidding distance formulac and the shape of the landing area, theauthors put forward that the average skidding distance is the shortest when the ratio of length and width is 1, and the landing collectioll area is in proportion to of average geometrical skidding distance. The new models of calculating average distance are presented.

Averaging Analysis of Self-Excited Motion of a Quasi-Axisymmetrical Gyrostat

The averaging analysis was carried out to study the motion of a quasi axisymmetrical gyrostat under a small magnitude self excited control torque. The common approach to investigating the problem of rigid body rotation under the action of a small torque known in the body frame was described. Using this approach, the problem (Grammel's problem for the case of small torque) that is maintaining the angular velocity of a quasi axisymmetrical gyrostat using a control torque quadratic in the angular velocity was solved.

Correlation Method of Average Plasma Velocity Measurement in Hall-Effect Thrusters

A new method to measure the average plasma velocity in a Hall-effect thruster is presented. The method is brought forward in virtue of the characteristics of low frequency oscillation induced by the propellant ionization in the channel and the oriented movement feature of the plasma density out of the channel. The method, equivalent to the correlation method generally used in the signal processing field, provides a solution to the problem of specific impulse measurement on a timescale of hundreds of microseconds and makes the time evolution of average plasma velocity clear. The comparison between the measured value and the calibrated value shows that the relative error is about 3%.

Indoor air quality risk assessment on the Canadian campus by a multilevel integrated weighted average method

Increasing incidents of indoor air quality(IAQ) related complaints lead us to the fact that IAQ has become a significant occupational health and environmental issue. However, how to effectively evaluate IAQ under different scale of multiple indicators is still a challenge. The traditional single-indicator method is subjected to uncertainties in assessing IAQ due to different subjectivity on good or bad quality and scalar differences of data set. In this study, a multilevel integrated weighted average IAQ method including initial walking through assessment(IWA) and two-layers weighted average method are developed and applied to evaluate IAQ of the laboratory building at the University of Regina in Canada. Some important chemical parameters related to IAQ in terms of volatile organic compounds(VOCs), methanol(HCHO), carbon dioxide(CO2), and carbon monoxide(CO) are evaluated based on 5 months continuous monitoring data. The new integrated assessment result can not only indicates the risk of an individual parameter, but also able to quantify the overall IAQ risk on the sampling site. Finally, some recommendations based on the result are proposed to address sustainable IAQ practices in the sampling area.

Average Rainfall Estimation: Methods Performance Comparison in the Brazilian Semi-Arid

Considering the rainfall’s importance in hydrological modeling, the objective of this study was the performance comparison, in convergence terms, of techniques often used to estimate the average rainfall over an area: Thiessen Polygon (TP) Method;Reciprocal Distance Squared (RDS) Method;Kriging Method (KM) and Multiquadric Equations (ME) Method. The comparison was done indirectly, using GORE and BALANCE index to assess the convergence results from each method by increasing the rain gauges density in a region, through six scenarios. The Coremas/Mae D’água Watershed employed as study area, with an area of 8385 km2, is situated on Brazilian semi-arid. The results showed the TP, as RDS and ME techniques to be employed successfully to obtain the average rainfall over an area, highlighting the MEM. On the other hand, KM, using two variograms models, had an unstable behavior, pointing the prior study of data and variogram’s choice as a need to practical applying.

Effect of residual Doppler averaging on the probe absorption in cascade type system: A comparative study

Effect of residual Doppler averaging on the probe absorption in an alkali vapor medium in the presence of a coherent pump beam is studied analytically for the Ξ type system. A coherent probe field is assumed to connect the ground level with the intermediate level whereas a coherent control beam is supposed to act between the intermediate energy level and the uppermost level. Optical Bloch equations（OBE） for a three-level Ξ type system and a four-level Ξ type system are derived by using density matrix formalism. These equations are solved by an analytic method to determine the probe response, which not only depends on the wavelength difference between the control（pump） field and the probe field but shows substantially different features depending on whether the wavelength of the control field is greater than that of the probe field or the reverse. The effect of temperature on probe response is also shown. Enhancement in probe absorption and additional features are noticed under a strong probe limit at room temperature. The four-level Ξ type system has two ground levels and this leads to substantial modification in the simulated probe absorption as compared to the three-level system.

Evaluation of Double Average Asian Options by the Legendre Spectral Method

In this paper, the evaluation of discretely sampled Asian options was considered by numerically solving the associated partial differential equations with the Legendre spectral method. Double average options were discussed as examples. The problem is a parabolic one on a finite domain whose equation degenerates into ordinary differential equations on the boundaries. A fully discrete scheme was established by using the Legendre spectral method in space and the Crank-Nicolson finite difference scheme in time. The stability and convergence of the scheme were analyzed. Numerical results show that the method can keep the spectral accuracy in space for such degenerate problems.

Experimental Assessment of the Battery Lifetime in WSN Based on the <i>Duty</i>-<i>Cycle</i><i>Current</i><i>Average</i>Method

A great amount of work addressed methods for predicting the battery lifetime in wireless sensor systems. In spite of these efforts, the reported experimental results demonstrate that the duty-cycle current average method, which is widely used to this aim, fails in accurately estimating the battery life time of most of the presented wireless sensor system applications. The aim of this paper is to experimentally assess the duty-cycle current average method in order to give more effective insight on the effectiveness of the method. An electronic metering system, based on a dedicated PCB, has been designed and developed to experimentally measure node current consumption profiles and charge extracted from the battery in two selected case studies. A battery lifetime measurement (during 30 days) has been carried out. Experimental results have been assessed and compared with estimations given by using the duty-cycle current average method. Based on the measurement results, we show that the assumptions on which the method is based do not hold in real operating cases. The rationality of the duty-cycle current average method needs reconsidering.

Aggregation operators and CRITIC-VIKOR method for confidence complex q-rung orthopair normal fuzzy information and their applications

Supply chain management is an essential part of an organisation's sustainable programme.Understanding the concentration of natural environment,public,and economic influence and feasibility of your suppliers and purchasers is becoming progressively familiar as all industries are moving towards a massive sustainable potential.To handle such sort of developments in supply chain management the involvement of fuzzy settings and their generalisations is playing an important role.Keeping in mind this role,the aim of this study is to analyse the role and involvement of complex q-rung orthopair normal fuzzy(CQRONF)information in supply chain management.The major impact of this theory is to analyse the notion of confidence CQRONF weighted averaging,confidence CQRONF ordered weighted averaging,confidence CQRONF hybrid averaging,confidence CQRONF weighted geometric,confidence CQRONF ordered weighted geometric,confidence CQRONF hybrid geometric operators and try to diagnose various properties and results.Furthermore,with the help of the CRITIC and VIKOR models,we diagnosed the novel theory of the CQRONF-CRITIC-VIKOR model to check the sensitivity analysis of the initiated method.Moreover,in the availability of diagnosed operators,we constructed a multi-attribute decision-making tool for finding a beneficial sustainable supplier to handle complex dilemmas.Finally,the initiated operator's efficiency is proved by comparative analysis.

Application of Weighted Average Method in Evaluation System for Rural Cadre Distance Education

We elaborate the application method,process and effect of weighted average method in the examination and evaluation system for modern distance education of rural party members and cadres.The study shows that this method reflects the evaluation results objectively and comprehensively and plays a remarkable role in establishing and improving the examination and evaluation system,thus will have an important reference value for the development of modern distance education of rural party members and cadres in the future.

A Posteriori Error Estimate of Two Grid Mixed Finite Element Methods for Semilinear Elliptic Equations

In this paper, we present the a posteriori error estimate of two-grid mixed finite element methods by averaging techniques for semilinear elliptic equations. We first propose the two-grid algorithms to linearize the mixed method equations. Then, the averaging technique is used to construct the a posteriori error estimates of the two-grid mixed finite element method and theoretical analysis are given for the error estimators. Finally, we give some numerical examples to verify the reliability and efficiency of the a posteriori error estimator.

改进和优化黑果枸杞及其制品中花青素测定的pH示差法

建立一种基于美国官方分析化学师协会(Association of Official Analytical Chemists,AOAC)方法检测黑果枸杞及其制品中花青素含量的改进pH示差法。考察了黑果枸杞及其制品中花青素的最佳提取和检测条件,通过液相色谱-三重四级杆串联质谱法鉴别出黑果枸杞中花青素的具体化学结构,并计算出混合花青素的平均摩尔质量。通过分光光度法测得混合花青素的平均摩尔消光系数,对改进后的pH示差法进行方法学验证和花青素的含量测定。结果显示,最佳提取和检测条件如下:黑果枸杞花青素提取溶剂为盐酸-80%(体积分数)乙醇(3∶97,体积比),料液比为1∶100(g∶mL),提取温度为50℃,提取时间为30 min,缓冲溶液稀释5倍后静置平衡20 min。液相色谱-三重四级杆串联质谱法鉴别黑果枸杞中主要以矮牵牛素类花青素为主(占97.96%),黑果枸杞特有的混合花青素平均摩尔质量为912.7 g/mol,平均摩尔消光系数为29591 L/(mol·cm)。pH示差法改进后能够满足方法学验证要求,固体样品和液体样品最低检出限分别为28.2 mg/100 g、0.282 mg/100 mL。方法改进后花青素提取增长率均大于20%,静置平衡20 min后单次检测结果精密度小于0.3%。以矮牵牛素类花青素代替矢车菊素-3-O-葡萄糖苷计算花青素含量平均提高了2.41倍,能真实地反映黑果枸杞及其制品中花青素的含量。