Passive dynamic walking has been developed as a possible explanation for the efficiency of the human gait. This paper presents a passive dynamic walking model with segmented feet, which makes the bipedal walking gait ...Passive dynamic walking has been developed as a possible explanation for the efficiency of the human gait. This paper presents a passive dynamic walking model with segmented feet, which makes the bipedal walking gait more close to natural human-like gait. The proposed model extends the simplest walking model with the addition of fiat feet and torsional spring based compliance on ankle joints and toe joints, to achieve stable walking on a slope driven by gravity. The push-off phase includes foot rotations around the toe joint and around the toe tip, which shows a great resemblance to human normal walking. This paper investigates the effects of the segmented foot structure on bipedal walking in simulations. The model achieves satisfactory walking results on even or uneven slopes.展开更多
A quadruped robot with four actuated hip joints and four passive highly compliant knee joints is used to demonstrate the potential of underactuation from two standpoints： learning locomotion and perception. First, we...A quadruped robot with four actuated hip joints and four passive highly compliant knee joints is used to demonstrate the potential of underactuation from two standpoints： learning locomotion and perception. First, we show that： （i） forward locomotion on flat ground can be learned rapidly （minutes of optimization time）; （ii） a simulation study reveals that a passive knee configuration leads to faster, more stable, and more efficient locomotion than a variant of the robot with active knees; （iii） the robot is capable of learning turning gaits as well. The merits of underactuation （reduced controller complexity, weight, and energy consumption） are thus preserved without compromising the versatility of behavior. Direct optimization on the reduced space of active joints leads to effective learning of model-free controllers. Second, we find passive compliant joints with po- tentiometers to effectively complement inertial sensors in a velocity estimation task and to outperform inertial and pressure sensors in a terrain detection task. Encoders on passive compliant joints thus constitute a cheap and compact but powerful sensing device that gauges joint position and force/torque, and -- if mounted more distally than the last actuated joints in a legged robot -- it delivers valuable information about the interaction of the robot with the ground.展开更多
Fingers are the basic components of anthropomorphic hands.At present,most anthropomorphic fingers utilize rigid joints,which have obvious fabrication and assembly complexities as well as limited flexibility and adapta...Fingers are the basic components of anthropomorphic hands.At present,most anthropomorphic fingers utilize rigid joints,which have obvious fabrication and assembly complexities as well as limited flexibility and adaptability.Thus,some anthropomorphic fingers were attempted to utilize compliant joints learned from bioinspiration,but they have a limited self-resetting ability and lateral deformation resistance,as well as occupying a large space and having a non-anthropomorphic appearance.In this paper,nine compliant joints for anthropomorphic fingers were analyzed using Finite Element Analysis(FEA),based on which two combined compliant joints were proposed,and the optimal one was obtained through FEA and experiments.An anthropomorphic finger that embeds parts of the compliant joint into the adjacent phalanxes was then designed.Finally,the anthropomorphic finger was fabricated and experiments were conducted.Experimental results show that the anthropomorphic finger with the proposed combined compliant joints has a better self-resetting ability and lateral deformation resistance while ensuring a large range of motion similar to that of the human finger,and the required actuating force is reasonable.Furthermore,the embedded joint structure can reduce the occupied space of the joint so as to improve the anthropomorphic appearance of the finger,and enhance its lateral deformation resistance.展开更多
There is seldom approach developed for the initial topology design of flexure-based compliant mechanisms. The most commonly-used approaches, which start with an existing rigid-body mechanism, do not consider the perfo...There is seldom approach developed for the initial topology design of flexure-based compliant mechanisms. The most commonly-used approaches, which start with an existing rigid-body mechanism, do not consider the performances between different topologies. Moreover, they rely heavily on the rigid-body topology, therefore limit the diversity of compliant mechanisms topology. To obtain the optimal initial topology of such mechanisms directly from problem specifications without referencing to the existing mechanism topologies, a spring-joint method is presented for a restricted class of the serial passive flexure-based compliant mechanisms, which are the building blocks of parallel compliant mechanisms. The topology of the compliant mechanisms is represented by a serial spring-joint mechanism（SSJM） that is a traditional rigid-body mechanism with a torsional spring acting on each joint, and is described by position vectors of the spring-joints. A simplified compliance matrix, determined by the position vectors, is used to characterize the tip of the SSJM kinematically, and is optimized to ensure the desired freedoms of the compliant mechanisms during optimization. The topology optimization problem is formulated as finding out the optimal position of the spring-joints in a blank design domain with an objective function derived from the simplified compliance matrix. In design examples, syntheses of the compliant mechanisms with both single freedom and two decoupled freedoms are presented to illustrate the proposed method. The proposed method provides a new way for the initial design of flexure-based compliant mechanisms.展开更多
The conventional linkage mechanisms with compliant joint have been widely studied and implemented for increasing the adaptability of the mechanism to external contacts. However, the analysis of how compliant joints in...The conventional linkage mechanisms with compliant joint have been widely studied and implemented for increasing the adaptability of the mechanism to external contacts. However, the analysis of how compliant joints in linkage mechanism can reduce the energy consumption isn＇t still studied deeply. In a mobile service robot head, the actions of blinking the eyes and moving the eyeballs are realized by the planar linkage mechanism respectively. Therefore, minimizing the driving torques through motion trajectories for the linkage mechanism, which will be beneficial to extend the working time for mobile service robots. The dynamic modeling of the linkage mechanism with springs-loaded compliant joint is established. An optimization procedure for obtaining the optimal parameters of springs is proposed for minimizing the max value of driving torques within a range of desired operating conditions. The Simulations prove that the linkage mechanism with compliant joints can effectively reduce the driving torques, and reduce the energy consumption consequently. The framework can also be applied in other similar applications to reduce the driving torque and save energy. Compared with previous efforts, this is the first attempt that the linkage mechanism with complaint joint is applied in the robot head for reducing the driving torque.展开更多
There are several design equations available for calculating the torsional compliance and the maximum torsion stress of a rectangular cross-section beam, but most depend on the relative magnitude of the two dimensions...There are several design equations available for calculating the torsional compliance and the maximum torsion stress of a rectangular cross-section beam, but most depend on the relative magnitude of the two dimensions of the crosssection(i.e., the thickness and the width). After reviewing the available equations, two thickness-to-width ratio Independent equations that are symmetric with respect to the two dimensions are obtained for evaluating the maximum torsion stress of rectangular cross-section beams. Based on the resulting equations, outside lamina emergent torsional joints are analyzed and some useful design Insights are obtained. These equations, together with the previous work on symmetric equations for calculating torsional compliance, provide a convenient and effective way for designing and optimizing torsional beams in compliant mechanisms.展开更多
基金supported by the National Natural Science Foundation of China (61005082, 61020106005)Doctoral Fund of Ministry of Education of China (20100001120005)+1 种基金PKU-Biomedical Engineering Join Seed Grant 2012the 985 Project of PekingUniversity (3J0865600)
文摘Passive dynamic walking has been developed as a possible explanation for the efficiency of the human gait. This paper presents a passive dynamic walking model with segmented feet, which makes the bipedal walking gait more close to natural human-like gait. The proposed model extends the simplest walking model with the addition of fiat feet and torsional spring based compliance on ankle joints and toe joints, to achieve stable walking on a slope driven by gravity. The push-off phase includes foot rotations around the toe joint and around the toe tip, which shows a great resemblance to human normal walking. This paper investigates the effects of the segmented foot structure on bipedal walking in simulations. The model achieves satisfactory walking results on even or uneven slopes.
基金Acknowledgment Matej Hoffmann was supported by the Swiss National Science Foundation project ＂From locomotion to cognition＂ （Grant No. 200020-122279/1）. Jakub Simanek was supported by the Grant Agency of the CTU in Prague （Grant No. SGS 15/163/OHK3/2T/13）. Matej Hoffmann would like to thank Roll Pfeifer for continuous support of this project and to the collaborators that contributed to the investigations that laid the foundations for this work, in particular Fumiya Iida, Michal Reinstein, Nico Schmidt, and students Stefan Hutter, Richard Meuris, Nicolas Ruegg, Urs Fassler, and Mathias Weyland. We would also like to thank Koh Hosoda for the idea that passive joints may increase the overall ground contact duration of individual legs and Nadja Schilling for a discussion of the ＂template＂ of leg morphology in mammalian running. Finally, we are indebted to Michal Reinstein and Kenichi Narioka for valuable comments on the manuscript.
文摘A quadruped robot with four actuated hip joints and four passive highly compliant knee joints is used to demonstrate the potential of underactuation from two standpoints： learning locomotion and perception. First, we show that： （i） forward locomotion on flat ground can be learned rapidly （minutes of optimization time）; （ii） a simulation study reveals that a passive knee configuration leads to faster, more stable, and more efficient locomotion than a variant of the robot with active knees; （iii） the robot is capable of learning turning gaits as well. The merits of underactuation （reduced controller complexity, weight, and energy consumption） are thus preserved without compromising the versatility of behavior. Direct optimization on the reduced space of active joints leads to effective learning of model-free controllers. Second, we find passive compliant joints with po- tentiometers to effectively complement inertial sensors in a velocity estimation task and to outperform inertial and pressure sensors in a terrain detection task. Encoders on passive compliant joints thus constitute a cheap and compact but powerful sensing device that gauges joint position and force/torque, and -- if mounted more distally than the last actuated joints in a legged robot -- it delivers valuable information about the interaction of the robot with the ground.
基金This work was supported by the Beijing Natural Science Foundation-Haidian Original Innovation Joint Fund Project(Grant No.L172015)the Fundamental Research Funds for the Central Universities(Grant No.YWF-17-ZF-F-03).
文摘Fingers are the basic components of anthropomorphic hands.At present,most anthropomorphic fingers utilize rigid joints,which have obvious fabrication and assembly complexities as well as limited flexibility and adaptability.Thus,some anthropomorphic fingers were attempted to utilize compliant joints learned from bioinspiration,but they have a limited self-resetting ability and lateral deformation resistance,as well as occupying a large space and having a non-anthropomorphic appearance.In this paper,nine compliant joints for anthropomorphic fingers were analyzed using Finite Element Analysis(FEA),based on which two combined compliant joints were proposed,and the optimal one was obtained through FEA and experiments.An anthropomorphic finger that embeds parts of the compliant joint into the adjacent phalanxes was then designed.Finally,the anthropomorphic finger was fabricated and experiments were conducted.Experimental results show that the anthropomorphic finger with the proposed combined compliant joints has a better self-resetting ability and lateral deformation resistance while ensuring a large range of motion similar to that of the human finger,and the required actuating force is reasonable.Furthermore,the embedded joint structure can reduce the occupied space of the joint so as to improve the anthropomorphic appearance of the finger,and enhance its lateral deformation resistance.
基金supported by National Natural Science Foundation of China(Grant No.91223201)Guangdong Provincial Natural Science Foundation of China(Grant No.S2013030013355)+1 种基金Guangdong Provincial Universities and Colleges Pearl River Scholar Funded Scheme(2010)Fundamental Research Funds for the Central Universities,China(Grant No.2012ZP0004)
文摘There is seldom approach developed for the initial topology design of flexure-based compliant mechanisms. The most commonly-used approaches, which start with an existing rigid-body mechanism, do not consider the performances between different topologies. Moreover, they rely heavily on the rigid-body topology, therefore limit the diversity of compliant mechanisms topology. To obtain the optimal initial topology of such mechanisms directly from problem specifications without referencing to the existing mechanism topologies, a spring-joint method is presented for a restricted class of the serial passive flexure-based compliant mechanisms, which are the building blocks of parallel compliant mechanisms. The topology of the compliant mechanisms is represented by a serial spring-joint mechanism（SSJM） that is a traditional rigid-body mechanism with a torsional spring acting on each joint, and is described by position vectors of the spring-joints. A simplified compliance matrix, determined by the position vectors, is used to characterize the tip of the SSJM kinematically, and is optimized to ensure the desired freedoms of the compliant mechanisms during optimization. The topology optimization problem is formulated as finding out the optimal position of the spring-joints in a blank design domain with an objective function derived from the simplified compliance matrix. In design examples, syntheses of the compliant mechanisms with both single freedom and two decoupled freedoms are presented to illustrate the proposed method. The proposed method provides a new way for the initial design of flexure-based compliant mechanisms.
基金Supported by National Natural Science Foundation of China(Grant No.51105089)Shenzhen Engineering Laboratory of Industrial Robots and Systems(Grant No.A224412028)Shenzhen Engineering Laboratory of Performance Robots at Digital Stage(Grant No.[2014]1507)
文摘The conventional linkage mechanisms with compliant joint have been widely studied and implemented for increasing the adaptability of the mechanism to external contacts. However, the analysis of how compliant joints in linkage mechanism can reduce the energy consumption isn＇t still studied deeply. In a mobile service robot head, the actions of blinking the eyes and moving the eyeballs are realized by the planar linkage mechanism respectively. Therefore, minimizing the driving torques through motion trajectories for the linkage mechanism, which will be beneficial to extend the working time for mobile service robots. The dynamic modeling of the linkage mechanism with springs-loaded compliant joint is established. An optimization procedure for obtaining the optimal parameters of springs is proposed for minimizing the max value of driving torques within a range of desired operating conditions. The Simulations prove that the linkage mechanism with compliant joints can effectively reduce the driving torques, and reduce the energy consumption consequently. The framework can also be applied in other similar applications to reduce the driving torque and save energy. Compared with previous efforts, this is the first attempt that the linkage mechanism with complaint joint is applied in the robot head for reducing the driving torque.
基金Supported by National Science Foundation Research of the United States (Grant No.1663345)National Natural Science Foundation of China(Grant No.51675396)Fundamental Research Fund for the Central Universities(Grant No.12K5051204021)
文摘There are several design equations available for calculating the torsional compliance and the maximum torsion stress of a rectangular cross-section beam, but most depend on the relative magnitude of the two dimensions of the crosssection(i.e., the thickness and the width). After reviewing the available equations, two thickness-to-width ratio Independent equations that are symmetric with respect to the two dimensions are obtained for evaluating the maximum torsion stress of rectangular cross-section beams. Based on the resulting equations, outside lamina emergent torsional joints are analyzed and some useful design Insights are obtained. These equations, together with the previous work on symmetric equations for calculating torsional compliance, provide a convenient and effective way for designing and optimizing torsional beams in compliant mechanisms.
