Analysis of Software Development and Operation Measures from the Perspective of Security Technology

Security technology is crucial in software development and operation in the digital age. Secure software can protect user privacy and data security, prevent hacker attacks and data breaches, ensure legitimate business operations, and protect core assets. However, the development process often faces threats such as injection attacks, Cross-Site Scripting (XSS), and Cross-Site Request Forgery (CSRF), mainly due to code vulnerabilities, configuration errors, and risks from third-party components. To meet these challenges, this paper discusses the application of security technology in development and operation, emphasizing security requirements analysis, design principles, coding practices, and testing during the development phase. Along with focusing on environmental configuration, continuous monitoring, emergency response, disaster recovery, and regular auditing and updating during the operation phase. These measures can significantly enhance the security of software systems and protect user and corporate data.

Component-based Control Software Design for Flexible Manufacturing System

A new method that designs and implements the component-based distributed & hierarchical flexible manufacturing control software is described with a component concept in this paper. The proposed method takes aim at improving the flexibility and reliability of the control system. On the basis of describing the concepts of component-based software and the distributed object technology, the architecture of the component-based software of the control system is suggested with the Common Object Request Broker Architecture (CORBA). And then, we propose a design method for component-based distributed & hierarchical flexible manufacturing control system. Finally, to verify the software design method, a prototype flexible manufacturing control system software has been implemented in Orbix 2.3c, VC + + 6. 0 and has been tested in connection with the physical flexible manufacturing shop at the WuXi Professional Institute.

Component-based software reliability process simulation considering imperfect debugging

In view of the flaws of component-based software （CBS） reliability modeling and analysis, the low recognition degree of debugging process, too many assumptions and difficulties in obtaining the solution, a CBS reliability simulation process is presented incorporating the imperfect debugging and the limitation of debugging resources. Considering the effect of imperfect debugging on fault detec- tion and correction process, a CBS integration testing model is sketched by multi-queue muhichannel and finite server queuing model （MMFSQM）. Compared with the analytical method based on pa- rameters and other nonparametric approaches, the simulation approach can relax more of the usual reliability modeling assumptions and effectively expound integration testing process of CBS. Then, CBS reliability process simulation procedure is developed accordingly. The proposed simulation ap- proach is validated to be sound and effective by simulation experiment studies and analysis.

Software Technology for E-Commerce Era

The rapid growth of Internet usage and electronic commerce (e commerce) applications will push traditional industries to transform their business models and to re engineer their information systems. This direction will give the software industry either great opportunities for their business growth or crucial challenges to their existence. This article describes two essential challenges the software industry will face and presents relevant new technologies that will be helpful for overcoming those challenges.

Research on the Component-based Software Architecture

Computer software has been becoming more and more c om plex with the development of hardware. Thus, how to efficiently develop extensib le, maintainable and adaptable software occurs to be an urgent problem. The comp onent-based software development technique is a better method to solve the prob lem. In this paper, we first discuss the concept, description method and some fa miliar styles of software architecture, and then analyze the merits of using the software architecture to guide the software development. We also present a gene ral design method for component. Its applications are finally provided.

Research on the Teaching System of Creative and Entrepreneurial Software Engineering(Digital Media Technology)Talents Training

The cultivation of innovative and entrepreneurial capability is a quality requirement of the times for the training of college and university talents. However, the regular teaching system universally has such problems as much more emphasis on theory than on practice, much more emphasis on inheritance than on innovation, and mismatching between talent training and market demand, so that a great number of graduates do not have enough innovative capacity, and it is very difficult for them to engage in related jobs of software engineering steadily and permanently. By investigating and analyzing similar majors of more than 20 schools at home and abroad, this article proposes a teaching system of talent training of the 3 C-cored major of "innovative and entrepreneurial" software engineering(digital media technology) based on regions, oriented to the industry and marked by school-enterprise linkage, and in connection with the characteristics of college and university education.

Component-Based Software Trustworthiness Fuzzy Analytic Hierarchy Process Model

For a more accurate and comprehensive assessment of the trustworthiness of component-based soft- ware system, the fuzzy analytic hierarchy process is introduced to establish the analysis model. Combine qualitative and quantitative analyses, the impacts to overall trustworthiness by the different types of components are distinguished. Considering the coupling relationship between components, dividing the system into several layers from target layer to scheme layer, evaluating the scheme advantages disadvantages by group decision-making, the trustworthiness of a typical J2EE structured component-based software is assessed. The trustworthiness asses model of the software components provides an effective methods of operation.

Component-based software reliability analysis incorporating imperfect debugging and change-point

Against the deficiencies of component-based software(CBS) reliability modeling and analysis,for instance,importing too many assumptions,paying less attention to debugging process without considering imperfect debugging and change-point(CP) problems adequately,an approach of CBS reliability process analysis is proposed which incorporates the imperfect debugging and CP.First,perfect/imperfect debugging and CP are reviewed.Based on the queuing theory,a multi-queue multichannel and infinite server queuing model(MMISQM) is presented to sketch the integration test process of CBS.Meanwhile,considering the effects of imperfect debugging and CP,expressions for fault detection and correction are derived based on MMISQM.Numerical results demonstrate that the proposed model can sketch the integration test process of CBS with preferable performance which outperforms other models.

A software reliability growth model for component-based software incorporating debugging delay and imperfect debugging

In view of the problems and the weaknesses of component-based software （ CBS ） reliability modeling and analysis, and a lack of consideration for real debugging circumstance of integration tes- ting, a CBS reliability process analysis model is proposed incorporating debugging time delay, im- perfect debugging and limited debugging resources. CBS integration testing is formulated as a multi- queue muhichannel and finite server queuing model （MMFSQM） to illustrate fault detection process （FDP） and fault correction process （FCP）. A unified FCP is sketched, given debugging delay, the diversities of faults processing and the limitations of debugging resources. Furthermore, the impacts of imperfect debugging on fault detection and correction are explicitly elaborated, and the expres- sions of the cumulative number of fault detected and corrected are illustrated. Finally, the results of numerical experiments verify the effectiveness and rationality of the proposed model. By comparison, the proposed model is superior to the other models. The proposed model is closer to real CBS testing process and facilitates software engineer＇ s quantitatively analyzing, measuring and predicting CBS reliability. K

A component-based back-propagation reliability model with low complexity for complex software systems

Since most of the available component-based software reliability models consume high computational cost and suffer from the evaluating complexity for the software system with complex structures,a component-based back-propagation reliability model(CBPRM)with low complexity for the complex software system reliability evaluation is presented in this paper.The proposed model is based on the artificial neural networks and the component reliability sensitivity analyses.These analyses are performed dynamically and assigned to the neurons to optimize the reliability evaluation.CBPRM has a linear increasing complexity and outperforms the state-based and the path-based reliability models.Another advantage of CBPRM over others is its robustness.CBPRM depends on the component reliabilities and the correlative sensitivities,which are independent from the software system structure.Based on the theory analysis and experiment results,it shows that the complexity of CBPRM is evidently lower than the contrast models and the reliability evaluating accuracy is acceptable when the software system structure is complex.

Testing Component-Based Software: What It has to do with Design and Component Selection

In a component-based software development life cycle, selection of preexisting components is an important task. Every component that has to be reused has an associated risk of failure of not meeting the functional and non-functional requirements. A component's failure would lead a developer to look for some other alternative of combinations of COTS, in-house and engineered components among possible candidate combinations. This means design itself can readily change. The very process of design of a software system and component selection seems to be heavily dependent on testing results. Instability of design, further, becomes more severe due to requirements change requests. Therefore, this instability of design has to be essentially mitigated by using proper design and testing approaches, otherwise, it may lead to exorbitantly high testing cost due to the repeated testing of various alternatives. How these three activities: Component-based software design, component selection and component-based software testing are interrelated? What process model is most suited to address this concern? This work explores the above questions and their implication in terms of nature of a process model that can be convincing in case of component-based software development.

Improving Information Technology Infrastructure Library Service Delivery Using an Integrated Lean Six Sigma Framework: A Case Study in a Software Application Support Scenario

Increasing competition in service businesses (eg: Information Technology, Healthcare, Education, Logistics, Distribution, Hospitality Financial and other services) is compelling corporates to adopt business improvement philosophies and methodologies for addressing customer demands for better quality service and organizational demands for improving the profit margins through cost reduction. Many companies around the world have already implemented Information Technology Infrastructure Library (ITIL) as a way to manage and control their Information Technology (IT) Departments more effectively. These companies are now willing to improve their ITIL processes in order to become even more efficient. Lean Six Sigma is a methodology that has been suggested as a means to resolve these problems, reducing costs and improving quality. Its application in the IT Services area is becoming increasingly popular among researchers and academicians and can be used to conduct these improvements. Despite the application of lean six sigma approaches to different contexts in the service sector, the application of Lean Six Sigma approaches in service delivery specific to Information Technology Service Management (ITSM) remains largely untested. The purpose of this paper is to implement Integrated Lean Six Sigma for Software application support services and evaluate the benefits of continual service improvement over ITIL.

Microchip Technology收购HI-TECH Software

Microchip（美国微芯科技公司）宣布收购总部位于澳大利亚布里斯班的世界一流嵌入式系统开发工具供应商HI-TECH Software。HI-TECH Software以拥有高性能ANSI C编译器而享誉业界。该编译器采用优化的全程编译技术，具有全知代码生成功能。

Online Fashion Retailer Bonobos Selects Gerber Technology's YuniquePLM^(TM) Industry-Tailored Software to Support Rapid Growth and Fast-Paced Product Innovation

Tolland,Connecticut,USA-Gerber Technology,a business unit of Gerber Scientific, Inc.(NYSE:GRB) and a world leader in automated CAD/CAM and PLM solutions for the apparel and flexible materials industry,announces that fast-growing internet retailer Bonobos,Inc. has selected the YuniquePLM product

Software and Mobile Apps as a Strategy for Productivity Improvement in the Construction Industry

The construction industry, known for its low productivity, is increasingly utilising software and mobile apps to enhance efficiency. However, more comprehensive research is needed to understand the effectiveness of these technology applications. The PRISMA principles utilised a scoping review methodology to ascertain pertinent studies and extract significant findings. From 2013 onwards, articles containing data on mobile applications or software designed to enhance productivity in the construction sector were obtained from multiple databases, including Emerald Insight, Science Direct, IEEE Xplore, and Google Scholar. After evaluating 2604 articles, 30 were determined to be pertinent to the study and were subsequently analysed for the review. The review identified five key themes: effectiveness, benefits, successful implementation examples, obstacles and limitations, and a comprehensive list of software and mobile apps. In addition, 71 software and mobile apps have shown potentially how these technologies can improve communication, collaboration, project management, real-time collaboration, document management, and on-the-go project information and estimating processes in the construction industry, increasing efficiency and productivity. The findings highlight the potential of these technologies such as Automation, Radio-Frequency Identification (RFID), Building Information Modeling (BIM), Augmented Reality (AR), Virtual Reality (VR), and Internet of Things (IoT) to improve efficiency and communication in the construction industry. Despite challenges such as cost, lack of awareness, resistance to change, compatibility concerns, human resources, technological and security concerns and licensing issues, the study identifies specific mobile applications and software with the potential to enhance efficiency significantly, improve productivity and streamline workflows. The broader societal impacts of construction software and mobile app development include increased efficiency, job creation, and sustainability.

A FGR Software Model for Measuring the Effect of Technological Progress

The work of quantitative studying the effect of technological progress on economic growth, being of great complexity and far-reaching significance, has become a quite popular research topic in the world. In recent years there are a large number of scientists who are engaged in this research both at home and abroad.

基于Computer Simulation Technology的磁共振射频线圈模拟与设计

目的:基于CST(Computer Simulation Technology)软件设计磁共振射频线圈,利用软件功能计算S参数、驻波比,求解每个网格的电场和磁场的方向、大小等,辅助完成实际线圈设计。方法:以单圈线圈为例,设计3层仿真模型:铜箔线圈层、环氧玻璃布层压板层、水模层。正确输入每一层的材料参数,并加入电容、端口等集总参数元件。设计合适的网格划分要求,插入场监视器。结果:数据结果包括一维结果和二、三维结果,其中一维结果包括S参数,驻波比,不连续端口的电流、电压、阻抗,集总参数元件的电流、电压、阻抗等,二、三维结果包括电场分布、磁场分布、表面电流等。从S11参数看出此线圈模型可在21.86 MHz处实现调谐和匹配,实际中可用作0.5 T磁共振成像设备的线圈。电磁场分布结果可以看出电容附近电场强度较高,磁场强度在线圈附近z方向强度较高。结论:磁共振射频线圈的设计可以利用CST软件辅助完成,通过调整线圈的形状、铜箔宽度等建立模型,根据S参数查看调谐匹配、耦合结果,通过场监视器的设置,查看二、三维电磁场分布。由结果再修改模型,最终完成设计。

Integrated Application Technology of Feces Processing in Duck Farm at Scale Based on Configuration Technology

[Objective] The aim was to explore technology on processing feces in duck farms at scale, providing guiding method for effective control of environmental issues in breeding farms. [Methed] Bio-safety disposal and recovering processing of excrements in a duck farm were researched based on technology of configuration, detection, digestion, EM and poultry breeding. [Result] The integrated application technology is quite simple and the cost is not high. During breeding period, excellent organic fertilizers and high-protein forages could be obtained without any antibiotics. Furthermore, secondary wastes and pollution would not occur. In addition, ammonia was lower in excrements processed with earthworm and air pollution was reduced; the produced humus provided organic fertilizers and improved barren soils. [Conclusion] The research provides references of multi-technology integration for related industries.

Recent developments of InteCAST software and its applications on special castings

with the development of computer technology, foundry CAE technology has made rapid progress. Commercialsoftware packages of casting process simulation, therefore, have become more and more practical. This paper introducesboth the recent developments and some applications of InteCAST software, a commercial numerical simulation softwarepackage for foundry industry, with more than 120 customers all over the world. The function modules of lnteCAST8.0 andsome new techniques, such as uneven mesh technology for mold filling simulation and numerical mouse technology fordata visualization, were introduced. Several applications on special castings such as investment casting, low pressure diecasting, and high pressure die casting, were given. These applications showed that the software can help engineers tooptimize casting process by forecasting casting defect.

A Comparison of Chinese, Japanese, and Korean shipyard production technology

This paper compares Chinese, Korean, and Japanese shipyard production technology. Development in the world shipbuilding over recent years has influenced focus areas related to shipyard manufacturing technologies and product performance. Software systems, information technology, production technology, and local challenges of shipyards are compared with shipbuilding outputs among these three countries. Various technologies developments, shipyard production and the problems in Chinese, Japanese, and Korean shipyards are discussed respectively. Finally, future areas of research are pointed out.