Synthetic reinforced composites affect the environment adversely and have become a global concern, causing increased natural composite demand for sustainability and cost effectiveness. Glass is a popular material that...Synthetic reinforced composites affect the environment adversely and have become a global concern, causing increased natural composite demand for sustainability and cost effectiveness. Glass is a popular material that is highly consumed in reinforced composites for its superior mechanical strength. As opposed to that, flax obtained from flax stalks can be used as an alternative reinforcing material with synthetic fibers to minimize manmade fiber consumption. Hence, this research work addresses a few flax/glass-reinforced hybrid composites by using a thermoset polyester matrix. Here, six categories of samples are made, like neat flax, neat glass, and flax/glass fabric reinforced hybrid composite, followed by different stacking layer sequences and hand layout techniques during processing. Afterwards, the mechanical behavior, thermal stability, morphological behavior, and water absorption of hybrid samples were investigated. Among the developed samples, neat glass (NG) composite exhibits superior mechanical properties, while neat flax (NF) shows the lowest result. It is apparent that the mechanical properties and thermal stability of hybrid samples are in between NF and NG because, by adding glass with flax fabric, the strength of hybrid samples is increased. Moreover, it is noticeable that, due to multiple stacking layers of flax and glass, hybrid 3 and hybrid 4 show better strength than consecutive single stacking layers in hybrid 1 and hybrid 2. Among all hybrid composites, the H4 shows comparatively better mechanical and thermal properties due to having the glass layers on the outermost surface. In summary, this research work demonstrated the feasibility of flax fabric with glass fabric as a reinforced hybrid composite that can be used in automobile inner bodies, household furnishing, and home interior decoration.展开更多
Synthetic reinforced composites affect the environment adversely and have become a global concern, causing increased natural composite demand for sustainability and cost effectiveness. Glass is a popular material that...Synthetic reinforced composites affect the environment adversely and have become a global concern, causing increased natural composite demand for sustainability and cost effectiveness. Glass is a popular material that is highly consumed in reinforced composites for its superior mechanical strength. As opposed to that, flax obtained from flax stalks can be used as an alternative reinforcing material with synthetic fibers to minimize manmade fiber consumption. Hence, this research work addresses a few flax/glass-reinforced hybrid composites by using a thermoset polyester matrix. Here, six categories of samples are made, like neat flax, neat glass, and flax/glass fabric reinforced hybrid composite, followed by different stacking layer sequences and hand layout techniques during processing. Afterwards, the mechanical behavior, thermal stability, morphological behavior, and water absorption of hybrid samples were investigated. Among the developed samples, neat glass (NG) composite exhibits superior mechanical properties, while neat flax (NF) shows the lowest result. It is apparent that the mechanical properties and thermal stability of hybrid samples are in between NF and NG because, by adding glass with flax fabric, the strength of hybrid samples is increased. Moreover, it is noticeable that, due to multiple stacking layers of flax and glass, hybrid 3 and hybrid 4 show better strength than consecutive single stacking layers in hybrid 1 and hybrid 2. Among all hybrid composites, the H4 shows comparatively better mechanical and thermal properties due to having the glass layers on the outermost surface. In summary, this research work demonstrated the feasibility of flax fabric with glass fabric as a reinforced hybrid composite that can be used in automobile inner bodies, household furnishing, and home interior decoration.展开更多
The existing research of the woven fabric self-lubricating liner mainly focus on the tribological performance improvements and the service life raised by changing different fiber type combinations, adding additive mod...The existing research of the woven fabric self-lubricating liner mainly focus on the tribological performance improvements and the service life raised by changing different fiber type combinations, adding additive modification, and performing fiber surface modification. As fabric composites, the weave structures play an important role in the mechanical and tribological performances of the liners. However, hardly any literature is available on the friction and wear behavior of such composites with different weave structures. In this paper, three weave structures (plain, twill 1/3 and satin 8/5) of hybrid Kevlar/PTFE fabric composites are selected and pin-on-flat linear reciprocating wear studies are done on a CETR tester under different pressures and different frequencies. The relationship between the tensile strength and the wear performance are studied. The morphologies of the worn surfaces under the typical test conditions are analyzed by means of scanning electron microscopy (SEM). The analysis results show that at 10 MPa, satin 8/5 performs the best in friction-reduction and antiwear performance, and plain is the worst. At 30 MPa, however, the antiwear performance is reversed and satin 8/5 does not even complete the 2 h wear test at 16 Hz. There is no clear evidence proving that the tensile strength has an influence on the wear performance. So the different tribological performance of the three weave structures of fabric composites may be attributed to the different PTFE proportions in the fabric surface and the different wear mechanisms. The fabric composites are divided into three regions: the lubrication region, the reinforced region and the bonding region. The major mechanisms are fatigue wear and the shear effects of the friction force in the lubrication region. In the reinforced region fiber-matrix de-bonding and fiber breakage are involved. The proposed research proposes a regional wear model and further indicates the wear process and the wear mechanism of fabric composites.展开更多
The Kevlar/polytetrafluroethylene(Kevlar/PTFE) fabric composite can be used as a self-lubricating liner of the self-lubricating bearing.Many types of nano-particles can improve the tribological performance of the po...The Kevlar/polytetrafluroethylene(Kevlar/PTFE) fabric composite can be used as a self-lubricating liner of the self-lubricating bearing.Many types of nano-particles can improve the tribological performance of the polymer-based composite.Unfortunately,up to now,published work on the effect of nano-particles on the tribological performance of the fabric composite which can be used as a self-lubricating liner is quite scarce.Therefore,for the purpose of exploring a way to significantly improve the tribological performance of the fabric composite,the tribological performance of the Kevlar/PTFE fabric composite filled with nano-titania is evaluated by using the block-on-ring wear tester.The scanning electron microscopy is utilized to observe the morphologies of worn surfaces of the fabric composites and the counterparts.The tensile properties of the composites are evaluated on the universal material testing machine.The test results show that the addition of nano-titania at a proper mass fraction of the matrix resin improves the wear resistance and the tensile strength,decreases the friction coefficient,and makes the wear volume of the composite reach a relative steady state more quickly;plastic deformation and microcutting are important for the wear of the fabric composite;a lubricating layer is formed on the worn surface of the composite during sliding,and the lubricating layer is critical for the tribological performance of the composite;the formation and properties of the lubricating layer are influenced by the nano-titania particles.The proposed study on the effect of nano-titania on the tribological performance of the Kevlar/PTFE fabric composite,especially on the evolution of the worn surface of the composite,provides the basis for further understanding of the influence mechanism of the nano-particles on the tribological performance of the composite and explores a method of improving the tribological performance of the composite.展开更多
The status and the variation of electrical resistance of impacted carbon fiber/epoxy-matrix composites were studied by ultrasonic F-scan and electrical resistance measurement The experimental results shows that impact...The status and the variation of electrical resistance of impacted carbon fiber/epoxy-matrix composites were studied by ultrasonic F-scan and electrical resistance measurement The experimental results shows that impact damage energy threshold value of carbon fabric/epoxy-matrix composites can determine by using ultrasonic F-scan. When the impact energy exceeds the threshold value, damage is generated in composites. Electrical resistance of impacted composites is changed owing to the contact of each carbon fiber unit in composites, which cause a change of the series-parallel in conductors. The veracity of detecting impact damage in composites can be improved in this case.展开更多
Al/Al2O3 composites of different ratios were hot-press sintered at 575~640℃ under a pressure of 30 MPa for 2 h in a vacuum furnace. It was found that the relative density of the Al/Al2O3composites could be increased...Al/Al2O3 composites of different ratios were hot-press sintered at 575~640℃ under a pressure of 30 MPa for 2 h in a vacuum furnace. It was found that the relative density of the Al/Al2O3composites could be increased evidently with the rise of sinter temperature. No reaction occurred between Al and Al2O3 at the sinter temperatures. Under 640℃-30 MPa-2 h experimental condition, Al/Al2O3 system FGM was successfully fabricated, and its density range changed quasi-continuously from 2.887x103 kg/m3 to 3.1909x103 kg/m3 within the middle 1.0 mmthickness range.展开更多
The study of stratospheric airships has become the focus in many countries in recent years,because of its potential applications in many fields.Lightweight and high strength envelopes are the keys to the design of str...The study of stratospheric airships has become the focus in many countries in recent years,because of its potential applications in many fields.Lightweight and high strength envelopes are the keys to the design of stratospheric airships,as it directly determines the endurance flight performance and loading deformation characteristics of the airship.A typical envelope of any stratospheric airship is a coated-fabric material which is composed of a fiber layer and several functional membrane layers.According to composite structure,nonlinearity and viscoelasticity are the two main characteristics of such envelope.Based on the analysis on the interaction between the different components in the micro-mechanical model of the coated-fabric,several invariant values reflecting the characteristics of the envelope material are obtained according to invariant theory.Furthermore,the constitutive equation that describes the viscoelasticity of the envelope material is derived.The constitutive equation can represent both the individual roles of the warp and weft fibers,and their further coupled interactions.The theoretical computation results were verified by off-axial tension tests.The results can help gain a deeper understanding of the mechanical mechanism and provide a reference for structural design of envelope material.展开更多
Impact damage tolerance is provided in intensity design on composites. The compression intensity of impacted composites requires more than 60% of its original intensity. The influence of impact on compressive intensit...Impact damage tolerance is provided in intensity design on composites. The compression intensity of impacted composites requires more than 60% of its original intensity. The influence of impact on compressive intensity and electrical resistance of carbon fabric/epoxy-matrix composites was studied in this paper. The experimental results shows that impact can cause damage in composites, degenerate compressive intensity, and increase resistance. The electrical resistance change rate was used as an evaluation indicator of impact damage tolerance of composites. Impact damage, which results from the applying process of composites, can be identified in time by electrical resistance measurement. So, the safety performance of composites can also be improved.展开更多
The effects of aramid/carbon on tensile properties of multilayered biaxial weft knitted( MBWK) fabric reinforced composites are analyzed by experiments. The tensile tests are inducted by the SHIMADZU AG-250 KNE univer...The effects of aramid/carbon on tensile properties of multilayered biaxial weft knitted( MBWK) fabric reinforced composites are analyzed by experiments. The tensile tests are inducted by the SHIMADZU AG-250 KNE universal material testing machine and Aramis V6 digital image correlation( DIC) technique.More specifically,the composite samples own four hybrid ratios(Na∶ Nc= 12∶ 0,8 ∶ 4,6 ∶ 6 and 4 ∶ 8). The results showed that the aramid/carbon hybrid MBWK fabric reinforced composites showed nearly linear response until reaching the maximum load and the inserting yarns distribution on the surface of MBWK fabrics reinforced composites had a great influence on the strain pattern distribution. Besides,the tensile strength,the tensile modulus and the elongation at breakage of 0° samples and 90° samples increased with the decreasing of aramid/carbon hybrid ratio. In a word,the changes of tensile strength, tensile modulus and elongation at breakage have a lot to do with the difference of aramid/carbon hybrid ratio.展开更多
In order to investigate the draping behavior of non-crimp fabrics(NCFs), two types of carbon NCFs with tricot-chain stitches or chain stitches were formed on a hemispherical mould via a stretch forming process. The ...In order to investigate the draping behavior of non-crimp fabrics(NCFs), two types of carbon NCFs with tricot-chain stitches or chain stitches were formed on a hemispherical mould via a stretch forming process. The shear angle and forming defects of the fabrics were measured on the hemisphere, under different blank holder forces(BHFs). The results showed that increasing BHF could enhance the shear angle slightly, reduce the asymmetry for the deformation of the fabrics, and change the main type of the process-induced defects. Besides, compression tests were performed on the corresponding composite components. By analyzing the change of fiber volume fraction and structural parameters of the textile reinforcements, the effects of draping behavior of NCFs on the mechanical performance of the composites were studied. The results reveal that draping process has distinguishable impacts on the mechanical properties of the final components, which is closely related to the stitching pattern of the NCFs.展开更多
Fabric composites are widely employed in self-lubricating bearing liners as solid lubrication materials.Although the tribological behaviors of fabric composites have been extensively studied,the cryogenic tribological...Fabric composites are widely employed in self-lubricating bearing liners as solid lubrication materials.Although the tribological behaviors of fabric composites have been extensively studied,the cryogenic tribological properties and mechanisms have been scarcely reported and are largely unclear to instruct material design for aerospace and other high-tech applications.Herein,the tribological properties of polytetrafluoroethylene(PTFE)-based hybrid-fabric composites were investigated at cryogenic and ambient temperatures in the form of pin-on-disk friction under heavy loads.The results suggest that the friction coefficients of the hybrid-fabric composites obviously increase with a decrease in wear when the temperature drops from 25 to−150°C.Moreover,thermoplastic polyetherimide(PEI),as an adhesive for fabric composites,has better cryogenic lubrication performance than thermosetting phenol formaldehyde(PF)resin,which can be attributed to the flexible chemical structure of PEI.The excellent lubrication performance of hybrid-fabric composites is attributed to the transfer film formed by PTFE fibers on the surface of fabrics.展开更多
The thermal conductivity of epoxy resin can be increased by a factor of eight to ten by loading with highly conductive particles. However, higher loadings increase the viscosity of the resin and hamper its use for liq...The thermal conductivity of epoxy resin can be increased by a factor of eight to ten by loading with highly conductive particles. However, higher loadings increase the viscosity of the resin and hamper its use for liquid composite molding processes. Thus, the enhancement of the out-of-plane thermal conductivity of carbon composites manufactured by VARTM and accomplished by matrix filling is limited to about 250%. In order to derive higher increases in out-of-plane thermal conductivity, additional measures have to be taken. These consist of introducing thermally conductive fibers in out-of-plane direction of the preform using a 3D-weaving process. Measured out-of-plane thermal conductivities of 3D-woven fabric composites are significantly increased compared to a typical laminated composite. It has been shown that if introducing highly conductive z-fibers, the use of a particle filled resin is not necessary and furthermore should be avoided due to the manufacturing problems mentioned above. An existing analytical model was altered to predict the effective thermal conductivity as a function of the composite material properties such as the thermal conductivities and volume contents of fibers in in-plane and out-of-plane directions, the thermal conductivity of the loaded resin, the grid-density of the out- of-plane fibers, and material properties of the contacting material. The predicted results are compared with measured data of manufactured samples.展开更多
Various yarn-shaped flexible strain sensors have recently been developed.However,research is lacking on additive manufacturing for smart clothing for integrating yarn sensors with commercial garments.Herein,a strain-s...Various yarn-shaped flexible strain sensors have recently been developed.However,research is lacking on additive manufacturing for smart clothing for integrating yarn sensors with commercial garments.Herein,a strain-sensing yarn is sewn into a piece of fabric through a novel stitching technique,and the influence of the stitching method and needle pitch on the sensing performance is investigated using finite element analysis(FEA).The sensing performance could be improved when the sensing yarn is self-locked in the fabric at the needle eyes,and the needle pitch was reduced to 0.5 cm,which is attributed to the enhanced stress and strain concentration.Meanwhile,the composite sensing fabric featured outstanding performance,including a low detection limit(0.1%),rapid response(280 ms),excellent durability(10000 cycles),and high stability(negligible drift and frequency independence).In addition,the remarkable wear resistance,washability,and anti-interference to ambient humidity and perspiration were obtained.Therein,the optimal stitch trace lengths of sensing yarn for detecting elbow motion,breathing,and heartbeats are discussed.Finally,a smart clothing system composed of smart clothing,data acquisition unit,and mobile APP was developed to simultaneously detect human movement and physiological signals.This work provides a reference to produce intelligent garments based on yarn sensors for health monitoring.展开更多
A form stable NaCl-Al2O3(50-50 wt-%)composite material for high temperature thermal energy storage was fabricated by cold sintering process,a process recently applied to the densification of ceramics at low temperatur...A form stable NaCl-Al2O3(50-50 wt-%)composite material for high temperature thermal energy storage was fabricated by cold sintering process,a process recently applied to the densification of ceramics at low temperature 300℃ under uniaxial pressure in the presence of small amount o f transient liquid.The fabricated composite achieved as high as 98.65% of the theoretical density.The NaCl-Al2O3 composite also retained the chloride salt without leakage after 30 heating-cooling cycles between 750℃-850℃ together with a holding period o f 24h at 850℃.X-ray diffraction measurements indicated congruent solubility o f the alumina in chloride salt,excellent compatibility o f NaCl with Al2O3,and chemical stability at high temperature.Structural analysis by scanning electron microscope also showed limited grain growth,high density,uniform NaCl distribution and clear faceted composite structure without inter-diffusion.The latent heat storage density o f 252.5J/g was obtained from simultaneous thermal analysis.Fracture strength test showed high sintered strength around 5 GPa after 50 min.The composite was found to have fair mass losses due to volatilization.Overall,cold sintering process has the potential to be an efficient,safe and cost-effective strategy for the fabrication of high temperature thermal energy storage materials.展开更多
A Nomex fabric/phenolic composite was prepared,and its tribological properties were evaluated under dry and water‐bathed sliding conditions by a pin‐on‐disk tribometer.The resulting size of the friction coefficient...A Nomex fabric/phenolic composite was prepared,and its tribological properties were evaluated under dry and water‐bathed sliding conditions by a pin‐on‐disk tribometer.The resulting size of the friction coefficient for the Nomex fabric/phenolic composite in the study occurred in the following order:dry sliding condition>distilled water‐bathed sliding condition>sea water‐bathed sliding condition.The fabric composite’s wear rate from high to low was as follows:distilled water‐bathed sliding condition>sea water‐bathed sliding condition>dry sliding condition.Under water‐bathed sliding conditions,penetration of water into the cracks accelerated the composite’s invalidation process,resulting in a higher wear rate.We also found that the extent of corrosion and transfer film formed on the counterpart pin significantly influenced the wear rate of the Nomex fabric composite.Discussion of the Nomex fabric composite’s wear mechanisms under the sliding conditions investigated is provided on the basis of the characterization results.展开更多
Interfacial solar-driven evaporators have presented great potential for water purification owing to their low energy consumption and high steam generation efficiency. However, their further applications are hindered b...Interfacial solar-driven evaporators have presented great potential for water purification owing to their low energy consumption and high steam generation efficiency. However, their further applications are hindered by the high costs and complicated fabrication processes. Here, a scalable bilayer interfacial evaporator was constructed via an affordable technique, in which carbon black deposited nonwoven fabric(CB@NF) was employed as the upper photothermal layer, as well as PVA/starch hybrid hydrogel for selffloating and water transport. Under simulated one sun irradiation, CB@NF layer displayed excellent photothermal conversion performance, whose temperature could increase 30.4 ℃ within 15 min. Moreover,the introduction of starch into PVA endowed the hybrid hydrogels with considerable water-absorption capability on the premise of ensuring mechanical properties. The resultant CB@NF/PVA/starch composites achieved superior interfacial adhesion performance with interfacial toughness at about 200 J m.Combining with good evaporation performance, salt-rejection property and high purification efficiency on pollutants, this evaporation system would become a promising candidate to alleviate water shortage.展开更多
Stratospheric airships are controllable lighter-than-air aircraft and have great potential application in surveillance and communication.The envelopes,one of the main structures of a stratospheric airship,are generall...Stratospheric airships are controllable lighter-than-air aircraft and have great potential application in surveillance and communication.The envelopes,one of the main structures of a stratospheric airship,are generally made of flexible fabric composites to be lightweight,high strength,capable of containing lifting gas,and resistant to the harsh stratospheric environment.The composites,however,are prone to tearing.Hence,their tearing behavior has attracted great attention.This paper explores the meso-scale tearing mechanism of an envelope and the temperature influence on its tear strength via experiment and numerical simulation.Biaxial tear tests were conducted on cruciform specimens,which were contacted with liquids(cold alcohol or hot water)at different temperatures including-25,20,50,80℃.The specimens’tear stresses were measured and the meso-scale tearing behavior was captured with a microscope.Besides,a novel finite element analysis model based on truss and spring elements was established to simulate the tearing behavior.It was found that the simulation result has a relative agreement with the tests.The simulation results show that the maximum tear stress of the envelope drops by 39.62%as the temperature rises from-60℃ to 80℃ and the tensile properties of yarns and matrix account for stress concentration around a crack tip.This work deeply reveals the meso-scale tearing mechanism of the envelope and provides a valuable reference for exploring tearing properties of flexible fabric composites.展开更多
The on-chip fabrication of a carbon nanoparticle-chitosan composite membrane (i.e. a sorbent membrane or a mixed matrix membrane) using laminar flow-based interfacial deprotonation technology was presented in this p...The on-chip fabrication of a carbon nanoparticle-chitosan composite membrane (i.e. a sorbent membrane or a mixed matrix membrane) using laminar flow-based interfacial deprotonation technology was presented in this paper. In addition, the effects of carbon nanoparticles and reactant flow rates on membrane formation were investigated. Finally, the permeability and adsorption capacities of the membrane were discussed. During fabrication, an acidic chitosan solution and a basic buffer solution that contained carbon nanoparticles were introduced into a microchannel. At the flow interface, a freestanding composite membrane with embedded carbon nanoparticles was formed due to the deprotonation of the chitosan molecules. The membrane growth gradually stopped with time from upstream to downstream and the thickness of the membrane increased rapidly and then slowly along the reactant flow direction. The formation of the membrane was divided into two stages. The average growth rate in the first stage was significantly larger than the average growth rate in the second stage. Carbon nanoparticles in the basic solution acted as nucleating agents and made the membrane formation much easier. As the flow rate of the chitosan solution increased, the averaged membrane thickness and the membrane hydraulic permeability initially increased and then decreased. Because of the addition of carbon nanoparticles, the formed membrane had adsorption abilities. The carbon nanoparticle-chitosan composite membrane that was fabricated in this study could be employed for simultaneous adsorption and dialysis in microdevices in the future.展开更多
This paper proposes a new analytical solution to predict the shear modulus of a two-dimensional(2D) plain weave fabric(PWF) composite accounting for the interaction of orthogonal interlacing strands with coupled s...This paper proposes a new analytical solution to predict the shear modulus of a two-dimensional(2D) plain weave fabric(PWF) composite accounting for the interaction of orthogonal interlacing strands with coupled shear deformation modes including not only relative bending but also torsion,etc.The two orthogonal yarns in a micromechanical unit cell are idealized as curved beams with a path depicted by using sinusoidal shape functions.The internal forces and macroscopic deformations carried by the yarn families,together with macroscopic shear modulus of PWFs are derived by means of a strain energy approach founded on micromechanics.Three sets of experimental data pertinent to three kinds of 2D orthogonal PWF composites have been implemented to validate the new model.The calculations from the new model are also compared with those by using two models in the earlier literature.It is shown that the experimental results correlate well with predictions from the new model.展开更多
文摘Synthetic reinforced composites affect the environment adversely and have become a global concern, causing increased natural composite demand for sustainability and cost effectiveness. Glass is a popular material that is highly consumed in reinforced composites for its superior mechanical strength. As opposed to that, flax obtained from flax stalks can be used as an alternative reinforcing material with synthetic fibers to minimize manmade fiber consumption. Hence, this research work addresses a few flax/glass-reinforced hybrid composites by using a thermoset polyester matrix. Here, six categories of samples are made, like neat flax, neat glass, and flax/glass fabric reinforced hybrid composite, followed by different stacking layer sequences and hand layout techniques during processing. Afterwards, the mechanical behavior, thermal stability, morphological behavior, and water absorption of hybrid samples were investigated. Among the developed samples, neat glass (NG) composite exhibits superior mechanical properties, while neat flax (NF) shows the lowest result. It is apparent that the mechanical properties and thermal stability of hybrid samples are in between NF and NG because, by adding glass with flax fabric, the strength of hybrid samples is increased. Moreover, it is noticeable that, due to multiple stacking layers of flax and glass, hybrid 3 and hybrid 4 show better strength than consecutive single stacking layers in hybrid 1 and hybrid 2. Among all hybrid composites, the H4 shows comparatively better mechanical and thermal properties due to having the glass layers on the outermost surface. In summary, this research work demonstrated the feasibility of flax fabric with glass fabric as a reinforced hybrid composite that can be used in automobile inner bodies, household furnishing, and home interior decoration.
文摘Synthetic reinforced composites affect the environment adversely and have become a global concern, causing increased natural composite demand for sustainability and cost effectiveness. Glass is a popular material that is highly consumed in reinforced composites for its superior mechanical strength. As opposed to that, flax obtained from flax stalks can be used as an alternative reinforcing material with synthetic fibers to minimize manmade fiber consumption. Hence, this research work addresses a few flax/glass-reinforced hybrid composites by using a thermoset polyester matrix. Here, six categories of samples are made, like neat flax, neat glass, and flax/glass fabric reinforced hybrid composite, followed by different stacking layer sequences and hand layout techniques during processing. Afterwards, the mechanical behavior, thermal stability, morphological behavior, and water absorption of hybrid samples were investigated. Among the developed samples, neat glass (NG) composite exhibits superior mechanical properties, while neat flax (NF) shows the lowest result. It is apparent that the mechanical properties and thermal stability of hybrid samples are in between NF and NG because, by adding glass with flax fabric, the strength of hybrid samples is increased. Moreover, it is noticeable that, due to multiple stacking layers of flax and glass, hybrid 3 and hybrid 4 show better strength than consecutive single stacking layers in hybrid 1 and hybrid 2. Among all hybrid composites, the H4 shows comparatively better mechanical and thermal properties due to having the glass layers on the outermost surface. In summary, this research work demonstrated the feasibility of flax fabric with glass fabric as a reinforced hybrid composite that can be used in automobile inner bodies, household furnishing, and home interior decoration.
基金supported by National Defense Foundation of China
文摘The existing research of the woven fabric self-lubricating liner mainly focus on the tribological performance improvements and the service life raised by changing different fiber type combinations, adding additive modification, and performing fiber surface modification. As fabric composites, the weave structures play an important role in the mechanical and tribological performances of the liners. However, hardly any literature is available on the friction and wear behavior of such composites with different weave structures. In this paper, three weave structures (plain, twill 1/3 and satin 8/5) of hybrid Kevlar/PTFE fabric composites are selected and pin-on-flat linear reciprocating wear studies are done on a CETR tester under different pressures and different frequencies. The relationship between the tensile strength and the wear performance are studied. The morphologies of the worn surfaces under the typical test conditions are analyzed by means of scanning electron microscopy (SEM). The analysis results show that at 10 MPa, satin 8/5 performs the best in friction-reduction and antiwear performance, and plain is the worst. At 30 MPa, however, the antiwear performance is reversed and satin 8/5 does not even complete the 2 h wear test at 16 Hz. There is no clear evidence proving that the tensile strength has an influence on the wear performance. So the different tribological performance of the three weave structures of fabric composites may be attributed to the different PTFE proportions in the fabric surface and the different wear mechanisms. The fabric composites are divided into three regions: the lubrication region, the reinforced region and the bonding region. The major mechanisms are fatigue wear and the shear effects of the friction force in the lubrication region. In the reinforced region fiber-matrix de-bonding and fiber breakage are involved. The proposed research proposes a regional wear model and further indicates the wear process and the wear mechanism of fabric composites.
文摘The Kevlar/polytetrafluroethylene(Kevlar/PTFE) fabric composite can be used as a self-lubricating liner of the self-lubricating bearing.Many types of nano-particles can improve the tribological performance of the polymer-based composite.Unfortunately,up to now,published work on the effect of nano-particles on the tribological performance of the fabric composite which can be used as a self-lubricating liner is quite scarce.Therefore,for the purpose of exploring a way to significantly improve the tribological performance of the fabric composite,the tribological performance of the Kevlar/PTFE fabric composite filled with nano-titania is evaluated by using the block-on-ring wear tester.The scanning electron microscopy is utilized to observe the morphologies of worn surfaces of the fabric composites and the counterparts.The tensile properties of the composites are evaluated on the universal material testing machine.The test results show that the addition of nano-titania at a proper mass fraction of the matrix resin improves the wear resistance and the tensile strength,decreases the friction coefficient,and makes the wear volume of the composite reach a relative steady state more quickly;plastic deformation and microcutting are important for the wear of the fabric composite;a lubricating layer is formed on the worn surface of the composite during sliding,and the lubricating layer is critical for the tribological performance of the composite;the formation and properties of the lubricating layer are influenced by the nano-titania particles.The proposed study on the effect of nano-titania on the tribological performance of the Kevlar/PTFE fabric composite,especially on the evolution of the worn surface of the composite,provides the basis for further understanding of the influence mechanism of the nano-particles on the tribological performance of the composite and explores a method of improving the tribological performance of the composite.
基金Funded by the Key Laboratory of Nondestructive Testing (Nanchang Hangkong University), Ministry of Education, China(No.ZD200829001)
文摘The status and the variation of electrical resistance of impacted carbon fiber/epoxy-matrix composites were studied by ultrasonic F-scan and electrical resistance measurement The experimental results shows that impact damage energy threshold value of carbon fabric/epoxy-matrix composites can determine by using ultrasonic F-scan. When the impact energy exceeds the threshold value, damage is generated in composites. Electrical resistance of impacted composites is changed owing to the contact of each carbon fiber unit in composites, which cause a change of the series-parallel in conductors. The veracity of detecting impact damage in composites can be improved in this case.
基金国家自然科学基金,Foundation of State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,Wuhan University of Technology
文摘Al/Al2O3 composites of different ratios were hot-press sintered at 575~640℃ under a pressure of 30 MPa for 2 h in a vacuum furnace. It was found that the relative density of the Al/Al2O3composites could be increased evidently with the rise of sinter temperature. No reaction occurred between Al and Al2O3 at the sinter temperatures. Under 640℃-30 MPa-2 h experimental condition, Al/Al2O3 system FGM was successfully fabricated, and its density range changed quasi-continuously from 2.887x103 kg/m3 to 3.1909x103 kg/m3 within the middle 1.0 mmthickness range.
基金supported by the China Postdoctoral Science Foundation under Grant No.2016M600891。
文摘The study of stratospheric airships has become the focus in many countries in recent years,because of its potential applications in many fields.Lightweight and high strength envelopes are the keys to the design of stratospheric airships,as it directly determines the endurance flight performance and loading deformation characteristics of the airship.A typical envelope of any stratospheric airship is a coated-fabric material which is composed of a fiber layer and several functional membrane layers.According to composite structure,nonlinearity and viscoelasticity are the two main characteristics of such envelope.Based on the analysis on the interaction between the different components in the micro-mechanical model of the coated-fabric,several invariant values reflecting the characteristics of the envelope material are obtained according to invariant theory.Furthermore,the constitutive equation that describes the viscoelasticity of the envelope material is derived.The constitutive equation can represent both the individual roles of the warp and weft fibers,and their further coupled interactions.The theoretical computation results were verified by off-axial tension tests.The results can help gain a deeper understanding of the mechanical mechanism and provide a reference for structural design of envelope material.
基金Funded by Key Laboratory of Nondestructive Testing (Nanchang Hangkong University)Ministry of Education, China(No. ZD200829001)Department of Education of Jiangxi Province, China(No. GJJ10531)
文摘Impact damage tolerance is provided in intensity design on composites. The compression intensity of impacted composites requires more than 60% of its original intensity. The influence of impact on compressive intensity and electrical resistance of carbon fabric/epoxy-matrix composites was studied in this paper. The experimental results shows that impact can cause damage in composites, degenerate compressive intensity, and increase resistance. The electrical resistance change rate was used as an evaluation indicator of impact damage tolerance of composites. Impact damage, which results from the applying process of composites, can be identified in time by electrical resistance measurement. So, the safety performance of composites can also be improved.
基金Tianjin Municipal Science and Technology Commission for the Financial Supports,China(No.11ZCKFSF00500)China's General Administration of Quality Supervision,Inspection and Quarantine for the Financial Supports,China(No.201210260)
文摘The effects of aramid/carbon on tensile properties of multilayered biaxial weft knitted( MBWK) fabric reinforced composites are analyzed by experiments. The tensile tests are inducted by the SHIMADZU AG-250 KNE universal material testing machine and Aramis V6 digital image correlation( DIC) technique.More specifically,the composite samples own four hybrid ratios(Na∶ Nc= 12∶ 0,8 ∶ 4,6 ∶ 6 and 4 ∶ 8). The results showed that the aramid/carbon hybrid MBWK fabric reinforced composites showed nearly linear response until reaching the maximum load and the inserting yarns distribution on the surface of MBWK fabrics reinforced composites had a great influence on the strain pattern distribution. Besides,the tensile strength,the tensile modulus and the elongation at breakage of 0° samples and 90° samples increased with the decreasing of aramid/carbon hybrid ratio. In a word,the changes of tensile strength, tensile modulus and elongation at breakage have a lot to do with the difference of aramid/carbon hybrid ratio.
基金Funded by the National Natural Science Foundation of China(No.51203144)
文摘In order to investigate the draping behavior of non-crimp fabrics(NCFs), two types of carbon NCFs with tricot-chain stitches or chain stitches were formed on a hemispherical mould via a stretch forming process. The shear angle and forming defects of the fabrics were measured on the hemisphere, under different blank holder forces(BHFs). The results showed that increasing BHF could enhance the shear angle slightly, reduce the asymmetry for the deformation of the fabrics, and change the main type of the process-induced defects. Besides, compression tests were performed on the corresponding composite components. By analyzing the change of fiber volume fraction and structural parameters of the textile reinforcements, the effects of draping behavior of NCFs on the mechanical performance of the composites were studied. The results reveal that draping process has distinguishable impacts on the mechanical properties of the final components, which is closely related to the stitching pattern of the NCFs.
基金financial support of the National Natural Science Foundation of China(Grant Nos.51935006,52105224,52175119)the Foundation of Key Laboratory of National Defense Science and Technology,Chinese Academy of Sciences(Grant No.CXJJ-22S047)the Key Research Program of the Chinese Academy of Sciences(Grant No.XDPB24)were gratefully acknowledged.
文摘Fabric composites are widely employed in self-lubricating bearing liners as solid lubrication materials.Although the tribological behaviors of fabric composites have been extensively studied,the cryogenic tribological properties and mechanisms have been scarcely reported and are largely unclear to instruct material design for aerospace and other high-tech applications.Herein,the tribological properties of polytetrafluoroethylene(PTFE)-based hybrid-fabric composites were investigated at cryogenic and ambient temperatures in the form of pin-on-disk friction under heavy loads.The results suggest that the friction coefficients of the hybrid-fabric composites obviously increase with a decrease in wear when the temperature drops from 25 to−150°C.Moreover,thermoplastic polyetherimide(PEI),as an adhesive for fabric composites,has better cryogenic lubrication performance than thermosetting phenol formaldehyde(PF)resin,which can be attributed to the flexible chemical structure of PEI.The excellent lubrication performance of hybrid-fabric composites is attributed to the transfer film formed by PTFE fibers on the surface of fabrics.
文摘The thermal conductivity of epoxy resin can be increased by a factor of eight to ten by loading with highly conductive particles. However, higher loadings increase the viscosity of the resin and hamper its use for liquid composite molding processes. Thus, the enhancement of the out-of-plane thermal conductivity of carbon composites manufactured by VARTM and accomplished by matrix filling is limited to about 250%. In order to derive higher increases in out-of-plane thermal conductivity, additional measures have to be taken. These consist of introducing thermally conductive fibers in out-of-plane direction of the preform using a 3D-weaving process. Measured out-of-plane thermal conductivities of 3D-woven fabric composites are significantly increased compared to a typical laminated composite. It has been shown that if introducing highly conductive z-fibers, the use of a particle filled resin is not necessary and furthermore should be avoided due to the manufacturing problems mentioned above. An existing analytical model was altered to predict the effective thermal conductivity as a function of the composite material properties such as the thermal conductivities and volume contents of fibers in in-plane and out-of-plane directions, the thermal conductivity of the loaded resin, the grid-density of the out- of-plane fibers, and material properties of the contacting material. The predicted results are compared with measured data of manufactured samples.
基金supported by the Qing Lan Projectthe Third-Priority Academic Program Development of Jiangsu Higher Education Institutions+1 种基金the Science and Technology Guidance Project of China National Textile and Apparel Council(Grant No.2020102)the Primary Research&Development Plan of Jiangsu Province(Grant No.BE2019045)。
文摘Various yarn-shaped flexible strain sensors have recently been developed.However,research is lacking on additive manufacturing for smart clothing for integrating yarn sensors with commercial garments.Herein,a strain-sensing yarn is sewn into a piece of fabric through a novel stitching technique,and the influence of the stitching method and needle pitch on the sensing performance is investigated using finite element analysis(FEA).The sensing performance could be improved when the sensing yarn is self-locked in the fabric at the needle eyes,and the needle pitch was reduced to 0.5 cm,which is attributed to the enhanced stress and strain concentration.Meanwhile,the composite sensing fabric featured outstanding performance,including a low detection limit(0.1%),rapid response(280 ms),excellent durability(10000 cycles),and high stability(negligible drift and frequency independence).In addition,the remarkable wear resistance,washability,and anti-interference to ambient humidity and perspiration were obtained.Therein,the optimal stitch trace lengths of sensing yarn for detecting elbow motion,breathing,and heartbeats are discussed.Finally,a smart clothing system composed of smart clothing,data acquisition unit,and mobile APP was developed to simultaneously detect human movement and physiological signals.This work provides a reference to produce intelligent garments based on yarn sensors for health monitoring.
文摘A form stable NaCl-Al2O3(50-50 wt-%)composite material for high temperature thermal energy storage was fabricated by cold sintering process,a process recently applied to the densification of ceramics at low temperature 300℃ under uniaxial pressure in the presence of small amount o f transient liquid.The fabricated composite achieved as high as 98.65% of the theoretical density.The NaCl-Al2O3 composite also retained the chloride salt without leakage after 30 heating-cooling cycles between 750℃-850℃ together with a holding period o f 24h at 850℃.X-ray diffraction measurements indicated congruent solubility o f the alumina in chloride salt,excellent compatibility o f NaCl with Al2O3,and chemical stability at high temperature.Structural analysis by scanning electron microscope also showed limited grain growth,high density,uniform NaCl distribution and clear faceted composite structure without inter-diffusion.The latent heat storage density o f 252.5J/g was obtained from simultaneous thermal analysis.Fracture strength test showed high sintered strength around 5 GPa after 50 min.The composite was found to have fair mass losses due to volatilization.Overall,cold sintering process has the potential to be an efficient,safe and cost-effective strategy for the fabrication of high temperature thermal energy storage materials.
基金The authors acknowledge the financial support of the National Science Foundation of China grant Nos.51375472 and 51305429.
文摘A Nomex fabric/phenolic composite was prepared,and its tribological properties were evaluated under dry and water‐bathed sliding conditions by a pin‐on‐disk tribometer.The resulting size of the friction coefficient for the Nomex fabric/phenolic composite in the study occurred in the following order:dry sliding condition>distilled water‐bathed sliding condition>sea water‐bathed sliding condition.The fabric composite’s wear rate from high to low was as follows:distilled water‐bathed sliding condition>sea water‐bathed sliding condition>dry sliding condition.Under water‐bathed sliding conditions,penetration of water into the cracks accelerated the composite’s invalidation process,resulting in a higher wear rate.We also found that the extent of corrosion and transfer film formed on the counterpart pin significantly influenced the wear rate of the Nomex fabric composite.Discussion of the Nomex fabric composite’s wear mechanisms under the sliding conditions investigated is provided on the basis of the characterization results.
基金financially supported by the National Natural Science Foundation of China (No.51733002,51803022 and 52003042)the Fundamental Research Funds for the Central Universities (No.2232021D-05)。
文摘Interfacial solar-driven evaporators have presented great potential for water purification owing to their low energy consumption and high steam generation efficiency. However, their further applications are hindered by the high costs and complicated fabrication processes. Here, a scalable bilayer interfacial evaporator was constructed via an affordable technique, in which carbon black deposited nonwoven fabric(CB@NF) was employed as the upper photothermal layer, as well as PVA/starch hybrid hydrogel for selffloating and water transport. Under simulated one sun irradiation, CB@NF layer displayed excellent photothermal conversion performance, whose temperature could increase 30.4 ℃ within 15 min. Moreover,the introduction of starch into PVA endowed the hybrid hydrogels with considerable water-absorption capability on the premise of ensuring mechanical properties. The resultant CB@NF/PVA/starch composites achieved superior interfacial adhesion performance with interfacial toughness at about 200 J m.Combining with good evaporation performance, salt-rejection property and high purification efficiency on pollutants, this evaporation system would become a promising candidate to alleviate water shortage.
基金the National High Technology Research and Development Program of China(No.2016YFB1200200)the National Natural Science Foundation of China(No.51906141)。
文摘Stratospheric airships are controllable lighter-than-air aircraft and have great potential application in surveillance and communication.The envelopes,one of the main structures of a stratospheric airship,are generally made of flexible fabric composites to be lightweight,high strength,capable of containing lifting gas,and resistant to the harsh stratospheric environment.The composites,however,are prone to tearing.Hence,their tearing behavior has attracted great attention.This paper explores the meso-scale tearing mechanism of an envelope and the temperature influence on its tear strength via experiment and numerical simulation.Biaxial tear tests were conducted on cruciform specimens,which were contacted with liquids(cold alcohol or hot water)at different temperatures including-25,20,50,80℃.The specimens’tear stresses were measured and the meso-scale tearing behavior was captured with a microscope.Besides,a novel finite element analysis model based on truss and spring elements was established to simulate the tearing behavior.It was found that the simulation result has a relative agreement with the tests.The simulation results show that the maximum tear stress of the envelope drops by 39.62%as the temperature rises from-60℃ to 80℃ and the tensile properties of yarns and matrix account for stress concentration around a crack tip.This work deeply reveals the meso-scale tearing mechanism of the envelope and provides a valuable reference for exploring tearing properties of flexible fabric composites.
基金supported by the Natural Science Foundation of Anhui Province,China(No.1408085ME96)the Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20133402120033)the Fundamental Research Funds for the Central Universities of China(No.WK2100000001)
文摘The on-chip fabrication of a carbon nanoparticle-chitosan composite membrane (i.e. a sorbent membrane or a mixed matrix membrane) using laminar flow-based interfacial deprotonation technology was presented in this paper. In addition, the effects of carbon nanoparticles and reactant flow rates on membrane formation were investigated. Finally, the permeability and adsorption capacities of the membrane were discussed. During fabrication, an acidic chitosan solution and a basic buffer solution that contained carbon nanoparticles were introduced into a microchannel. At the flow interface, a freestanding composite membrane with embedded carbon nanoparticles was formed due to the deprotonation of the chitosan molecules. The membrane growth gradually stopped with time from upstream to downstream and the thickness of the membrane increased rapidly and then slowly along the reactant flow direction. The formation of the membrane was divided into two stages. The average growth rate in the first stage was significantly larger than the average growth rate in the second stage. Carbon nanoparticles in the basic solution acted as nucleating agents and made the membrane formation much easier. As the flow rate of the chitosan solution increased, the averaged membrane thickness and the membrane hydraulic permeability initially increased and then decreased. Because of the addition of carbon nanoparticles, the formed membrane had adsorption abilities. The carbon nanoparticle-chitosan composite membrane that was fabricated in this study could be employed for simultaneous adsorption and dialysis in microdevices in the future.
基金National Natural Science Foundation of China(51075019)Aeronautical Science Foundation of China (20095251024)
文摘This paper proposes a new analytical solution to predict the shear modulus of a two-dimensional(2D) plain weave fabric(PWF) composite accounting for the interaction of orthogonal interlacing strands with coupled shear deformation modes including not only relative bending but also torsion,etc.The two orthogonal yarns in a micromechanical unit cell are idealized as curved beams with a path depicted by using sinusoidal shape functions.The internal forces and macroscopic deformations carried by the yarn families,together with macroscopic shear modulus of PWFs are derived by means of a strain energy approach founded on micromechanics.Three sets of experimental data pertinent to three kinds of 2D orthogonal PWF composites have been implemented to validate the new model.The calculations from the new model are also compared with those by using two models in the earlier literature.It is shown that the experimental results correlate well with predictions from the new model.