The effect of anodizing temperature on the structure and electrical properties of Al-Ti composite oxide film

The Al-Ti composite oxide films with high dielectric constant were prepared by hydrolysis precipitation and anodizing. The growth, structure and electrical properties of the Al-Ti composite oxide films formed at different anodizing temperatures from 25℃ to 85℃ have been studied by dissolution of anodic oxide films, Auger electron spectroscopy (AES), and electrical measurements. With the anodizing temperature increasing, the film growth rate increases, the structure of two layers in the Al-Ti composite oxide film converts into three layers, I-V characteristics change evidently, and the specific capacitance achieves a peak value at about 75℃. The local breakdown in the composite oxide films formed at 50℃ occurs obviously, which may be contributed to the lowest leakage current and the highest withstanding voltage.

Electrical and optical properties of indium tin oxide/epoxy composite film

The electrical and optical properties of the indium tin oxide （ITO）/epoxy composite exhibit dramatic variations as functions of the ITO composition and ITO particle size. Sharp increases in the conductivity in the vicinity of a critical volume fraction have been found within the framework of percolation theory. A conductive and insulating transition model is extracted by the ITO particle network in the SEM image, and verified by the resistivity dependence on the temperature. The dependence of the optical transmittance on the particle size was studied. Further decreasing the ITO particle size could further improve the percolation threshold and light transparency of the composite film.

Influences of pulse frequency on formation and properties of composite anodic oxide films on Ti-10V-2Fe-3Al alloy

A thick composite anodic oxide film was fabricated in an environmentally friendly malic acid electrolyte containing Poly Tetra Fluoro Ethylene(PTFE)nanoparticles on Ti-10V-2Fe-3Al alloys.The influence of pulse frequency on the morphology,microstructure and composition of composite anodic oxide films containing PTFE nanoparticles was investigated using Field Emission Scanning Electron Microscopy(FE-SEM)equipped with Energy Dispersive Spectroscopy(EDS),Atomic Force Microscopy(AFM)and Raman spectroscopy.The tribological properties in terms of the friction coefficient,wear loss and morphology of worn surfaces were measured by ball-ondisc tests.The electrochemical property was evaluated by potentiodynamic polarization.The results indicated that the titanium dioxide of composite anodic oxide films transformed from anatase to rutile with the change of pulse frequency,which could result from the electrochemical dynamic equilibrium.The combination of PTFE nanoparticles and malic acid electrolyte molecules can influence the energy fluctuation of electrochemical equilibrium and formation of composite anodic oxide films.Moreover,composite anodic oxide films fabricated under the condition of 1.0–2.0 Hz exhibited the best wear resistance and corrosion property.The schematic diagram of the film formation and PTFE nanoparticles spreading process under different frequencies was elucidated.