Analysis and seismic tests of composite shear walls with CFST columns and steel plate deep beams

A composite shear wall concept based on concrete filled steel tube （CFST） columns and steel plate （SP） deep beams is proposed and examined in this study. The new wall is composed of three different energy dissipation elements： CFST columns; SP deep beams; and reinforced concrete （RC） strips. The RC strips are intended to allow the core structural elements - the CFST columns and SP deep beams - to work as a single structure to consume energy. Six specimens of different configurations were tested under cyclic loading. The resulting data are analyzed herein. In addition, numerical simulations of the stress and damage processes for each specimen were carried out, and simulations were completed for a range of location and span-height ratio variations for the SP beams. The simulations show good agreement with the test results. The core structure exhibits a ductile yielding mechanism characteristic of strong column-weak beam structures, hysteretic curves are plump and the composite shear wall exhibits several seismic defense lines. The deformation of the shear wall specimens with encased CFST column and SP deep beam design appears to be closer to that of entire shear walls. Establishing optimal design parameters for the configuration of SP deep beams is pivotal to the best seismic behavior of the wall. The new composite shear wall is therefore suitable for use in the seismic design of building structures.

Lateral load-carrying capacity analyses of composite shear walls with double steel plates and filled concrete with binding bars

A method is developed to predict the lateral load-carrying capacity of composite shear walls with double steel plates and filled concrete with binding bars(SCBs). Nonlinear finite element models of SCBs were established by using the finite element tool, Abaqus. Tie constraints were used to connect the binding bars and the steel plates. Surface-to-surface contact provided by the Abaqus was used to simulate the interaction between the steel plate and the core concrete. The established models could predict the lateral load-carrying capacity of SCBs with a reasonable degree of accuracy. A calculation method was developed by superposition principle to predict the lateral load-carrying capacity of SCBs for the engineering application. The concrete confined by steel plates and binding bars is under multi-axial compression; therefore, its shear strength was calculated by using the Guo-Wang concrete failure criterion. The shear strength of the steel plates of SCBs was calculated by using the von Mises yielding criterion without considering buckling. Results of the developed method are in good agreement with the testing and finite element results.

Study on the Structural Performance of Steel Plate Shear Wall with Slits on Both Sides

This paper presents a new type of two sides slotted steel plate shear wall, and carries on the analysis to the finite element elastic buckling, respectively discusses the critical buckling load and the buckling mode. For the steel plate shear wall without stiffening ribs on both sides, the paper given the buckling coefficient formula, and give design proposal and reference value of steel plate shear wall with stiffened on both sides.

Experimental and analytical study on seismic behavior of steel-concrete multienergy dissipation composite shear walls

In this paper, a steel-concrete multi-energy dissipation composite shear wall, comprised of steel-reinforced concrete （SRC） columns, steel plate （SP） deep beams, a concrete wall and energy dissipation strips, is proposed. In order to study the multi-energy dissipation behavior and restorability after an earthquake, two stages of low cyclic loading tests were carded out on ten test specimens. In the first stage, test on five specimens with different number of SP deep beams was carried out, and the test lasted until the displacement drift reached 2%. In the second stage, thin SPs were welded to both sides of the five specimens tested in the first stage, and the same test was carried out on the repaired specimens （designated as new specimens）. The load-bearing capacity, stiffness, ductility, hysteretic behavior and failure characteristics were analyzed for both stages and the results are discussed herein. Extrapolating from these results, strength calculation models and formulas are proposed herein and simulations using ABAQUS carried out, they show good agreement with the test results. The study demonstrates that SRC columns, SP deep beams, concrete wall and energy dissipation strips cooperate well and play an important role in energy dissipation. In addition, this study shows that the shear wall has good recoverability after an earthquake, and that the welding of thin SP＇s to repair a deformed wall is a practicable technique.

Seismic performance evaluation of steel frame-steel plate shear walls system based on the capacity spectrum method

This paper presents some methods that the standard acceleration design response spectra derived from the present China code for seismic design of buildings are transformed into the seismic demand spectra, and that the base shear force-roof displacement curve of structure is converted to the capacity spectrum of an equivalent single-degree-of-freedom （SDOF） system. The capacity spectrum method （CSM） is programmed by means of MATLABT.0 computer language. A dual lateral force resisting system of 10-story steel frame-steel plate shear walls （SPSW） is designed according to the corresponding China design codes. The base shear force-roof displacement curve of structure subjected to the monotonic increasing lateral inverse triangular load is obtained by applying the equivalent strip model to stimulate SPSW and by using the finite element analysis software SAP2000 to make Pushover analysis. The seismic performance of this dual system subjected to three different conditions, i.e. the 8-intensity frequently occurred earthquake, fortification earthquake and seldom occurred earthquake, is evaluated by CSM program. The excessive safety of steel frame-SPSW system designed according to the present China design codes is pointed out and a new design method is suggested.

Improving behavior of semi-supported steel plate shear walls

In spite of the good performance of the steel plate shear wall(SPSW)in recent earthquakes and experimental studies,the need for huge columns to surround the infill plate is a major shortcoming of the system.This shortcoming can be resolved by using semi-supported SPSW.The semi-supported SPSW has secondary columns that prevent the transfer of stress from the infill plate to the main columns.In spite of extensive experimental and numerical investigations on SPSWs,there are many ambiguities regarding the behavior of the semi-supported SPSW.Although stress in the columns is reduced,incomplete diagonal tension field action is formed in the infill plate that creates new problems.In this paper,a new type of semi-supported SPSW is presented in which the steel plate and the secondary columns are angled.The creation of the angle of the plate and the secondary column makes it possible to use the full capacity of the steel plate as well as the capacity of the secondary columns.Numerical results showed that the wall with a 60°angle has a favorable performance relative to the semi-supported wall.Moreover,with the 60°angle,stiffness,strength and energy absorption is increased.The angle of the secondary columns has little effect on the non-elastic stiffness.Nevertheless,using a wall with an angle of more than 90°can neutralize the wall’s behavior relative to conventional walls.Therefore,the wall with a 60°angle as an optimal angle is recommended.

Effect of fiber angle on LYP steel shear walls behavior

Steel shear wall(SSW) was properly determined using numerical and experimental approaches.The properties of SSW and LYP(low yield point) steel shear wall(LSSW) were measured.It is revealed that LSSW exhibits higher properties compared to SSW in both elastic and inelastic zones.It is also concluded that the addition of CFRP(carbon fiber reinforced polymers) enhances the seismic parameters of LSSW(stiffness,energy absorption,shear capacity,over strength values).Also,stress values applied to boundary frames are lower due to post buckling forces.The effect of fiber angle was also studied and presented as a mathematical equation.

Pseudo-dynamic testing of a fabricated composite frame with steel plate shear walls

A pseudo-dynamic testing program was generated on a fabricated composite frame with steel plate shear walls （SPSWs） to study its seismic perlbrmance. The specimen was a three-storey single-bay frame, which was composed of H- section steel columns and composite beams, and was assembled by bolted height-adjustable steel beam-to-column connections （BHA connections）. Beam-only-connected SPSWs were selected as lateral load resisting members. The specimen was subjected to four ground motions of progressively increasing intensity. The results showed that： （1） beam-only-connected S PSWs provided sufficient lateral load resistance, lateral stiffness, and energy dissipation capacity to the fabricated frame via the tension ficld action developed in their infill panels; （2） the fabricated frame, assembled by BHA connections, exhibited substantial redundancy and good ductility; （3） an undesirable failure mode of the fabricated frame, in huge earthquakes, included severe cracking in composite beams and block shear failure in SPSWs＇ connections; （4） the inter-storey shear force distribution determined by ASCE/SE1 7-10 was verified with experimental data.

Numerical modeling of seismic behavior of ellipse and peanut-shaped auxetic steel plate shear walls

This study proposes a new auxetic-shaped steel plate shear walls(simply referred to as ASSPSWs)consisting of boundary members and built-in perforated infill plates.The connection type between the boundary members is a hinge joint.The hole forms on the infill plates include orthogonal ellipse-shaped(ASSPSW-OE)and orthogonal peanutshaped(ASSPSW-OP).This paper studied the hysteretic performance of two steel plate shear walls’types based on the finite element analysis method.Within the study context,a parametric analysis was carried out to investigate the influence of various factors,such as hole size and hole distance,on the seismic performance of steel plate shear walls(SPSWs).The results indicated that reducing the the ratio of the ligament thickness to ellipse major axis(t/D)in orthogonal ellipse-shaped SPSWs can effectively increase the porosity while reducing the bearing and energy dissipation capacities.Under the condition with the t/D unchanged,increasing the ratio of the major to minor axis of the ellipse(d/D)raises the porosity and does not significantly reduce the bearing capacity and energy dissipation capacity of the SPSWs.For orthogonal peanut-shaped SPSWs,the holes’geometrical parameters significantly influence the hysteretic performance.Particularly,with the increase in the radial ratio of large to small circles in a peanut-shaped hole(R/r),the spacing between cells decreases.When drift exceeds 2%,the equivalent viscous damping ratio decreases sharply.Unlike the orthogonal ellipse-shaped SPSWs,changing the arrangement angle of peanut-shaped cells has no significant effect on orthogonal peanut-shaped SPSWs.However,the larger the angle,the greater the out-of-plane buckling of orthogonal ellipse-shaped SPSWs;thus,the energy dissipation capacity is reduced.The similarities lie in that the larger cell arrangement angle will make the steel plates have a complete stress field,and the bearing capacity will be slightly improved.When the cell arrangement angle(θ)is 45°,the SPSWs can develop high initial stiffness.

焊接多腔双钢板-混凝土组合剪力墙抗震性能分析

大多数双钢板-混凝土组合剪力墙采用螺栓连接或焊接肋的方式使钢板和混凝土协同工作。然而,这种连接方式可能导致整体性和塑性变形效率较低,且制作复杂,焊接多腔双钢板-混凝土组合剪力墙能够有效地避免这些问题。为了深入研究焊接多腔双钢板-混凝土组合剪力墙的抗震性能,基于约束混凝土真三轴塑性-损伤本构模型和钢材弹塑性混合强化-韧性损伤本构模型,建立了组合剪力墙的精细化三维实体-壳模型,将模拟所得的滞回曲线、骨架曲线、刚度退化曲线、弹性刚度、承载力、累积耗能、等效阻尼粘滞系数和延性系数与已有拟静力试验结果相比较,发现两者吻合较好。分析结果表明:轴压比对组合剪力墙模型算例刚度和承载力的影响较小,而随剪跨比增大,组合剪力墙模型算例的刚度和承载力呈线性降低;轴压比对组合剪力墙模型算例总塑性耗能的影响较小,而剪跨比的影响较大,剪力墙总塑性耗能随剪跨比增大而降低;轴压比和剪跨比都不会改变算例各部件的耗能分配机制,即组合剪力墙模型算例以外钢板和内隔板耗能为主。

装配式轻钢框架-轻钢骨架轻混凝土墙板结构抗震性能

为研究装配式轻钢框架-轻钢骨架轻混凝土墙板结构抗震性能,对1个足尺轻钢框架结构试件和3个足尺轻钢框架-轻钢骨架轻混凝土墙板结构试件进行了低周反复荷载下的抗震性能试验及理论分析,试件变量包括:2种装配构造,即内嵌式装配墙板、外贴式装配墙板;2种轻钢骨架轻混凝土墙板,即框架式轻钢骨架轻混凝土墙板、桁架式轻钢骨架轻混凝土墙板。研究了各试件的破坏特征和损伤演化过程,分析了结构滞回特性、承载力、变形能力、刚度退化、耗能性能和应变。结果表明:装配式轻钢框架-轻钢骨架轻混凝土墙板结构共同工作性能良好,其水平承载力相比轻钢框架提高了204.7%~210.4%,抗侧刚度提高了257.3%~512.5%,结构变形及耗能能力有显著提高;内嵌墙板的自攻钉连接构造以及外贴墙板的螺栓连接构造传力性能可靠,结构具备2道抗震防线的受力特征;基于简化塑性分析模型以及拉压杆软化桁架模型,对试件承载力进行了计算,计算结果与试验符合较好。

联肢弯剪型钢板剪力墙抗震性能试验研究

联肢钢板剪力墙结构是将2片钢板剪力墙通过钢连梁连接形成的抗侧力结构。通过对1榀1/3缩尺的4层联肢弯剪型钢板剪力墙试件进行低周往复加载试验,从滞回曲线、骨架曲线、延性、承载力及刚度退化、耗能能力等方面研究了该结构体系的抗震性能,并且对试件的屈服顺序和变形模式进行了分析。结果表明:联肢钢板剪力墙试件的延性系数达到5.03,承载力退化系数均大于0.96,承载力和刚度退化稳定,等效黏滞阻尼系数达到0.25以上,表明联肢弯剪型钢板剪力墙具有优越的抗震性能。加载过程中,连梁先于墙板发生屈服,墙板先屈曲后屈服,此后柱脚和横梁相继屈服。连梁的引入改变了结构的屈服机制,提高了整体的延性和耗能能力,能够组成多道抗震防线,且试件整体最终也体现出合理的破坏机制。整体侧移曲线呈弯剪变形模式。该试验研究更加贴合实际工程中联肢钢板剪力墙结构的应用情况,为联肢钢板剪力墙结构的进一步研究和应用提供了试验基础。

低周反复荷载下T型双波纹钢板混凝土组合剪力墙受力性能试验研究

为研究低周反复荷载下T型双波纹钢板混凝土组合剪力墙的受力性能,对5个T型双波纹钢板混凝土组合剪力墙进行了低周反复加载试验。基于试验数据,分析了T型组合剪力墙的破坏模式、滞回曲线、变形能力及耗能能力,重点研究了边缘约束条件、波纹类型以及轴压比不同变化参数对T型组合剪力墙抗震性能指标的影响规律。研究结果表明:T型双波纹钢板混凝土组合剪力墙破坏模式主要有压屈破坏和压弯破坏两种;设置边缘约束构件是提高T型双波纹钢板混凝土组合剪力墙承载能力和变形能力的关键因素;纵向窄波纹钢板对内部混凝土的约束能力更强,在低周反复荷载下两者协同工作性更优,而横向窄波纹钢板试件强度退化最严重;采用全截面塑性设计方法进行T型双波纹钢板混凝土组合剪力墙正截面承载力计算,试验值与计算值吻合良好;T型双波纹钢板混凝土组合剪力墙具有较好的承载能力和变形能力,可适用于高层及超高层建筑结构中。

装配式槽钢组合梁中开孔钢板连接件力学性能

为研究新型装配式双拼槽钢-混凝土组合梁中开孔钢板剪力连接件(PSP剪力连接件)的力学性能,设计7组标准试件并开展推出试验,对比分析不同参数PSP剪力连接件的受剪承载力和破坏模式。利用ABAQUS非线性有限元模型对PSP剪力连接件的破坏模式和受力机制进行数值模拟,并与试验结果对比验证计算结果的可靠性。在此基础上,进一步分析开孔钢板厚度、开孔直径、混凝土强度、穿孔钢筋及连接件间距对PSP剪力连接件力学性能的影响。结果表明:除10 mm厚度的PSP剪力连接件外,所有4 mm与6 mm厚度的PSP剪力连接件均发生明显弯曲变形,试件破坏时连接件周围混凝土均出现斜向裂缝;开孔直径和穿孔钢筋对受剪承载力和抗剪刚度影响较小,而增加开孔钢板厚度、混凝土强度能提高剪力连接件受剪承载力和抗剪刚度;对于双排PSP剪力连接件,增大连接件间距能够显著提高单排PSP剪力连接件平均承载力,当间距为250 mm时,单排平均承载力达到单个PSP剪力连接件的91.2%。根据试验及有限元荷载滑移曲线提出装配式双拼槽钢-混凝土组合梁中单个PSP连接件荷载滑移曲线计算公式,为装配式双拼槽钢混组合梁的设计提供参考。

自攻螺钉与拉铆钉混合连接受剪承载性能试验

为改善自攻螺钉连接的构件在地震作用下易发生拉脱导致结构严重破坏的缺点,提升冷弯薄壁型钢组合墙体抗破坏能力,分析了组合墙体层间连接处的传力机理,针对自攻螺钉的破坏模式,提出拉铆钉与自攻螺钉混合连接。为研究混合连接的抗剪性能,共进行了48组连接接头抗剪性能试验,包含冷弯薄壁型钢结构常用的5种连接板厚度,不同搭接板厚比(变化范围1.0~2.0),包含纯自攻螺钉连接、纯拉铆钉连接及混合连接的连接方式。观察混合连接的破坏模式,自攻螺钉未发现拉脱破坏,其破坏模式主要表现为:板承压破坏与螺钉倾斜组合破坏、铆钉剪断破坏及板承压与铆钉部分剪断组合破坏3种;相较单一连接方式,混合连接荷载–位移曲线表现出更长的塑性阶段;当板厚比大于1.5且组合板厚小于3.0mm,混合连接的承载力及延性较单一连接增长明显;利用现有计算方法对混合连接的承载力进行累加计算,与试验结果对比,计算结果偏保守。研究发现:混合连接能较好地弥补拉铆钉和自攻螺钉受剪过程中的缺陷,有效改善自攻螺钉拉脱破坏,从而提升连接的承载力及延性;板厚和板厚比是影响混合连接破坏模式及承载力的重要因素,与单一连接相比,板厚比越大,承载力提升越大;排布方式对混合连接的力学性能及破坏机理影响有限;在本文试验工况下,结合混合连接的破坏模式,在现有计算方法的基础上,提出改善后的计算方法,其计算结果更合理。

大壁厚不锈钢复合板压力容器建造关键技术及应用

在大壁厚不锈钢复合板压力容器的建造过程中,通过深入研究其技术要点和难点,优化焊接接头结构设计,成功形成了一套完整的新型建造关键技术。这套技术不仅优化了焊接接头结构,还创新了一系列施工方法,包括筒体加热卷制、接头坡口机加工、接管内壁耐蚀层TIG/FCAW自动堆焊、不锈钢衬管液氮冷套、球形封头内壁耐蚀层带极埋弧堆焊、纵环缝窄间隙埋弧自动焊以及管口接头马鞍型埋弧焊等。这些新型建造关键技术的应用,在提高压力容器质量效果的同时,也带来了显著的经济效益,为行业同类型设备的建造提供借鉴。在未来的研究中,可以进一步探索这些技术在其他领域的应用,以实现更广泛的技术交流和合作。同时,对于大壁厚不锈钢复合板压力容器的建造,仍需不断深入研究其材料特性、工艺参数和施工方法,以不断提高设备的性能和安全性。

HPC端部加强双钢板组合剪力墙的抗震性能

为研究高性能混凝土端部加强双钢板组合剪力墙受力机理及破坏形态,以轴压比、腹部普通混凝土强度等级为关键参数,设计了4片普通试件,7片HPC端部加强试件,运用ABAQUS构建其有限元模型,研究其抗震性能。结果表明:同轴压比下,HPC端部加强试件相比普通试件屈服荷载提高16.30%,峰值荷载提升13.40%;随着轴压比提高,HPC端部加强试件峰值荷载和屈服荷载分别提高7.22%和2.72%,随着轴压比减小,HPC端部加强试件延性提升22.26%;提高腹部腔体混凝土强度等级,HPC端部加强试件的屈服荷载和峰值荷载分别提高13.01%和11.14%,延性提升16.91%。

装配式带夹芯保温槽型玻璃钢-钢板-槽钢-混凝土组合剪力墙轴压性能研究

提出一种装配式带夹芯保温槽型玻璃钢-钢板-槽钢-混凝土组合剪力墙,设计3个具有不同配筋形式和混凝土种类的墙板试件进行轴心受压试验,获得墙板在轴压作用下的破坏模式、荷载-位移曲线、荷载-应变曲线、承载力储备系数、延性系数、材料利用率等性能指标。通过ABAQUS有限元分析软件对墙板进行参数化分析,研究内嵌钢板强度和厚度对其轴压性能的影响。结果表明,墙板具有良好的承载力储备能力和延性性能;混凝土中掺入1%体积比的钢纤维可显著提高墙板内混凝土的抗拉性能,使混凝土强度得到更加充分的利用,布置钢筋可以显著提高墙板延性;墙板的承载力和延性随内嵌钢板厚度和强度的增加而增大,强度为Q355、厚度为4、6mm时,墙板材料利用率更高。提出适用于该类墙板的轴压承载力设计公式,考虑钢板屈曲和截面组合效应的墙板轴心受压承载力设计公式计算结果较精确。

窄翼缘异形柱-波纹钢板剪力墙体系的抗震性能

针对钢结构住宅凸梁、凸柱和抗侧刚度不足的问题,提出一种新型窄翼缘异形柱-波纹钢板剪力墙体系;通过与传统H形钢柱-平钢板剪力墙体系进行对比,确定内嵌波纹钢板布置方式,采用ABAQUS软件建立所提出体系的有限元模型,对所提出体系的抗震性能进行分析,探讨外部框架截面形式与布置方式、波纹钢板厚度与剪跨比等对所提出体系的抗侧承载力、耗能能力和塑性变形能力的影响。结果表明:所提出的体系具有较大的抗侧承载力和较强的耗能能力、塑性变形能力,极限抗侧承载力为设计值的1.73倍,具备一定的安全储备;横向布置的波纹钢板能有效减小其作用于框架梁柱的荷载;采用十字形异形柱使所提出的体系有更强的塑性变形能力;所提出体系中的异形柱偏肢宜沿剪力墙面内方向布置,内嵌波纹钢板厚度宜取为3~5 mm,剪跨比宜控制在1.25左右。

两边连接木盖板屈曲约束钢板剪力墙抗侧力性能试验研究

从环保角度提出一种钢木组合形式的两边连接防屈曲钢板剪力墙。基于已有的研究成果,设计两个试件,一个是没有木盖板约束的钢板剪力墙,另一个是覆盖木板作为钢板面外屈曲约束的钢板剪力墙。对试件采用位移控制加载方式进行拟静力试验,得到试件的滞回曲线。根据试验结果,分析了试件的骨架曲线、刚度退化和耗能能力。试验结果表明,木盖板抑制钢板屈曲效果较好,能够有效减小鼓曲声音;与无木盖板试件相比,有木盖板试件具有更高的承载力和更强的耗能能力。在试件破坏后,对试件进行拆卸,发现钢板腹部木盖板覆盖区域能够保持平整,拆卸后的木盖板在加载后也能保持完整。采用软件ABAQUS进行有限元分析,模拟结果和试验结果吻合,验证了模型的可行性。