RECRYSTALLIZATION BEHAVIOR AND PRIOR AUSTENITE GRAIN BOUNDARY CORROSION IN THE PLANE STRAIN COMPRESSION CONDITION FOR A LOW CARBON X70 PIPELINE STEEL

Recrystallization behavior of a low carbon X70 pipeline steel was studied in the plane strain compression condition. It was found that the dynamic recovery but no dynamic recrystal- lization occurred in the current experimental condition. A method for examining the prior austenite grain boundary corrosion was supposed.

A Reversible Data Hiding Algorithm Based on Image Camouflage and Bit-Plane Compression

Reversible data hiding in encrypted image(RDHEI)is a widely used technique for privacy protection,which has been developed in many applications that require high confidentiality,authentication and integrity.Proposed RDHEI methods do not allow high embedding rate while ensuring losslessly recover the original image.Moreover,the ciphertext form of encrypted image in RDHEI framework is easy to cause the attention of attackers.This paper proposes a reversible data hiding algorithm based on image camouflage encryption and bit plane compression.A camouflage encryption algorithm is used to transform a secret image into another meaningful target image,which can cover both secret image and encryption behavior based on“plaintext to plaintext”transformation.An edge optimization method based on prediction algorithm is designed to improve the image camouflage encryption quality.The reversible data hiding based bit-plane level compression,which can improve the redundancy of the bit plane by Gray coding,is used to embed watermark in the camouflage image.The experimental results also show the superior performance of the method in terms of embedding capacity and image quality.

Complete Focal Plane Compression Based on CMOS Image Sensor Using Predictive Coding

In this paper, a CMOS image sensor(CIS) is proposed, which can accomplish both decorrelation and entropy coding of image compression directly on the focal plane. The design is based on predictive coding for image decorrelation. The predictions are performed in analog domain by 2×2 pixel units. Both the prediction residuals and original pixel values are quantized and encoded in parallel. Since the residuals have a peak distribution around zero,the output codewords can be replaced by the valid part of the residuals' binary mode. The compressed bit stream is accessible directly at the output of CIS without extra disposition. Simulation results show that the proposed approach achieves a compression rate of 2. 2 and PSNR of 51 on different test images.

Numerical study on deformation and failure of reinforced sand

In order to investigate the deformation and failure of reinforced sand, and the reinforcing mechanism of flexible and rigid reinforcement, a set of plane strain compression tests of dense Toyoura reinforced sand with planar reinforcement of a wide range of stiffness were analysed by a nonlinear finite element method. The analysis was incorporated into an energy-based elasto-plastic constitutive model for sand to develop a stress path-independent work-hardening parameter based on the modified plastic strain energy concept. Numerical results indicate that the global stress-strain relations of sand specimens are reinforced by using relatively flexible and rigid reinforcement, and an unreinforced sand specimen can be reasonably simulated by the current finite element method. It is also found that the reinforcing mechanism and progressive failure with a development of shear bands in reinforced sand can be reasonably examined by the finite element method.

Sheet metal hardening curve determined by laminated sample and its adaptability to sheet forming processes

The hardening curve for sheet metal can be determined from the load-displacement curve of tensile specimen with rectangular cross-section. Therefore,uniaxial compression test on cylinder specimen made from laminated sample is put forward. Considering the influence of anisotropy on hardening properties and the stress state in popular forming process,plane strain compression test on cubic specimen made from laminated sample was advanced. Results show that the deformation range of hardening curves obtained from the presented methods is wide,which meets the need for the application in sheet metal forming processes. In view of the characteristics of methods presented in the paper and the stress strain state of various forming processes,the adaptability of the two methods presented in this paper is given.

Multi-Pass Simulation of Heavy Plate Rolling Including Intermediate Forced Cooling

Thermomechanical Controlled Processing (TMCP) including accelerated cooling after the final hot rolling pass is a well-established technology,widely applied in HSLA steel plate production.However,there are still certain limitations,especially for thicker plate.The rolling schedule includes a long holding period (HP) after the roughing stage to allow the temperature to fall sufficiently for optimised TMCP during finishing.Intermediate Forced Cooling (IFC) applied during the HP can increase productivity by decreasing the required hold time,can restrict austenite grain growth,and can also improve the subsequent strain penetration in thick plate with further metallurgical benefits.Multi-pass plane strain compression (PSC) tests have been performed on the thermomechanical compression (TMC) machine at Sheffield University including different severities of IFC.Clearly it is impossible to simulate all aspects of the temperature and strain gradients present in thick plates in laboratory specimens,and most of the tests were conducted at temperatures and strains calculated by Finite Element modelling as relevant to specific positions through the plate thickness.However,some aspects of the gradients were addressed with tests using cold platens.The results have indeed shown that IFC can shorten the HP and reduce austenite grain growth and its variation across thick plate.