Effects of Mapping Methods on Accuracy of Protein Coding Regions Prediction

[Objective] To discuss the effects of major mapping methods for DNA sequence on the accuracy of protein coding regions prediction,and to find out the effective mapping methods.[Method] By taking Approximate Correlation（AC） as the full measure of the prediction accuracy at nucleotide level,the windowed narrow pass-band filter（WNPBF） based prediction algorithm was applied to study the effects of different mapping methods on prediction accuracy.[Result] In DNA data sets ALLSEQ and HMR195,the Voss and Z-Curve methods are proved to be more effective mapping methods than paired numeric（PN）,Electron-ion Interaction Potential（EIIP） and complex number methods.[Conclusion] This study lays the foundation to verify the effectiveness of new mapping methods by using the predicted AC value,and it is meaningful to reveal DNA structure by using bioinformatics methods.

Uncertainties of landslide susceptibility prediction: Influences of random errors in landslide conditioning factors and errors reduction by low pass filter method

In the existing landslide susceptibility prediction(LSP)models,the influences of random errors in landslide conditioning factors on LSP are not considered,instead the original conditioning factors are directly taken as the model inputs,which brings uncertainties to LSP results.This study aims to reveal the influence rules of the different proportional random errors in conditioning factors on the LSP un-certainties,and further explore a method which can effectively reduce the random errors in conditioning factors.The original conditioning factors are firstly used to construct original factors-based LSP models,and then different random errors of 5%,10%,15% and 20%are added to these original factors for con-structing relevant errors-based LSP models.Secondly,low-pass filter-based LSP models are constructed by eliminating the random errors using low-pass filter method.Thirdly,the Ruijin County of China with 370 landslides and 16 conditioning factors are used as study case.Three typical machine learning models,i.e.multilayer perceptron(MLP),support vector machine(SVM)and random forest(RF),are selected as LSP models.Finally,the LSP uncertainties are discussed and results show that:(1)The low-pass filter can effectively reduce the random errors in conditioning factors to decrease the LSP uncertainties.(2)With the proportions of random errors increasing from 5%to 20%,the LSP uncertainty increases continuously.(3)The original factors-based models are feasible for LSP in the absence of more accurate conditioning factors.(4)The influence degrees of two uncertainty issues,machine learning models and different proportions of random errors,on the LSP modeling are large and basically the same.(5)The Shapley values effectively explain the internal mechanism of machine learning model predicting landslide sus-ceptibility.In conclusion,greater proportion of random errors in conditioning factors results in higher LSP uncertainty,and low-pass filter can effectively reduce these random errors.

Establishment of Prediction Method of Tourism Meteorological Index in Langzhong Ancient City

Based on the meteorological data of Langzhong from 2010 to 2020,the human body comfort index was calculated,and tourism climate comfort was evaluated to establish the prediction equation of tourism meteorological index.OLS was used to compare the correlation between actual tourist flow and tourism meteorological index and test the model effect.Average correlation coefficient R was 0.7017,so the correlation was strong,and P value was 0.The two were significantly correlated at 0.01 level(bilateral).It can be seen that the forecast equation of tourism meteorological index had a strong correlation with the actual number of tourists,and the predicted value was basically close to the actual situation,and the forecast effect is good.

Comparative Study of Probabilistic and Least-Squares Methods for Developing Predictive Models

This article explores the comparison between the probability method and the least squares method in the design of linear predictive models. It points out that these two approaches have distinct theoretical foundations and can lead to varied or similar results in terms of precision and performance under certain assumptions. The article underlines the importance of comparing these two approaches to choose the one best suited to the context, available data and modeling objectives.

Casing life prediction using Borda and support vector machine methods

Eight casing failure modes and 32 risk factors in oil and gas wells are given in this paper. According to the quantitative analysis of the influence degree and occurrence probability of risk factors, the Borda counts for failure modes are obtained with the Borda method. The risk indexes of failure modes are derived from the Borda matrix. Based on the support vector machine （SVM）, a casing life prediction model is established. In the prediction model, eight risk indexes are defined as input vectors and casing life is defined as the output vector. The ideal model parameters are determined with the training set from 19 wells with casing failure. The casing life prediction software is developed with the SVM model as a predictor. The residual life of 60 wells with casing failure is predicted with the software, and then compared with the actual casing life. The comparison results show that the casing life prediction software with the SVM model has high accuracy.

Preliminary Studies on Predicting the Tropical Indian Ocean Sea Surface Temperature through Combined Statistical Methods and Dynamic ENSO Prediction

The sea surface temperature （SST） in the In- dian Ocean affects the regional climate over the Asian continent mostly through a modulation of the monsoon system. It is still difficult to provide an a priori indication of the seasonal variability over the Indian Ocean. It is widely recognized that the warm and cold events of SST over the tropical Indian Ocean are strongly linked to those of the equatorial eastern Pacific. In this study, a statistical prediction model has been developed to predict the monthly SST over the tropical Indian Ocean. This model is a linear regression model based on the lag relationship between the SST over the tropical Indian Ocean and the Nino3.4 （5°S-5°N, 170°W-120°W） SST Index. The pre- dictor （i.e., Nino3.4 SST Index） has been operationally predicted by a large size ensemble E1 Nifio and the Southern Oscillation （ENSO） forecast system with cou- pled data assimilation （Leefs_CDA）, which achieves a high predictive skill of up to a 24-month lead time for the equatorial eastern Pacific SST. As a result, the prediction skill of the present statistical model over the tropical In- dian Ocean is better than that of persistence prediction for January 1982 through December 2009.

Prediction of Rural Residents’ Consumption Expenditure Based on Lasso and Adaptive Lasso Methods

When the variable of model is large, the Lasso method and the Adaptive Lasso method can effectively select variables. This paper prediction the rural residents’ consumption expenditure in China, based on respectively using the Lasso method and the Adaptive Lasso method. The results showed that both can effectively and accurately choose the appropriate variable, but the Adaptive Lasso method is better than the Lasso method in prediction accuracy and prediction error. It shows that in variable selection and parameter estimation, Adaptive Lasso method is better than the Lasso method.

PPA BASED PREDICTION-CORRECTION METHODS FOR MONOTONE VARIATIONAL INEQUALITIES

In this paper we study the proximal point algorithm (PPA) based predictioncorrection (PC) methods for monotone variational inequalities. Each iteration of these methods consists of a prediction and a correction. The predictors are produced by inexact PPA steps. The new iterates are then updated by a correction using the PPA formula. We present two profit functions which serve two purposes: First we show that the profit functions are tight lower bounds of the improvements obtained in each iteration. Based on this conclusion we obtain the convergence inexactness restrictions for the prediction step. Second we show that the profit functions are quadratically dependent upon the step lengths, thus the optimal step lengths are obtained in the correction step. In the last part of the paper we compare the strengths of different methods based on their inexactness restrictions.

Comparison of TEC prediction methods in mid-latitudes with GIM maps

There are many long-term and short-term prediction methods of Total Electron Content(TEC) that need to be tested for each specific region. Recently, much attention has been paid to testing TEC models in high-, low-latitude and equatorial regions. This paper compares the TEC prediction methods in the midlatitude zone according to the data of the Juliusruh, Rostov, Manzhouli stations in 2008 and 2015. For a long-term prediction, the IRI-Plas and Ne Quick models are compared with the Global Ionospheric Maps(GIM) presented by the Jet Propulsion Laboratory(JPL) and the Technical University of Catalonia(UPC).For a short-term prediction, the Standard Persistence Model(SPM) method, a 27 day median model, and the proposed short-term prediction method are compared for one day ahead. It is shown that for all stations the IRI-Plas model provides better compliance with GIM maps than the Ne Quick model irrespective of a solar activity level. An average absolute error lays in the range of 3 e3.5 TECU, relative root square mean(RMS) error in the range of 22 e27% in 2015 and 1.7 e2 TECU, 20 e25% in 2008. For the Ne Quick model, these estimates were 6.7 e8.2 TECU and 42 e45% in 2015 and 2.2 e3.6 TECU, 30 e37% in2008. For the short-term forecast, the best results were obtained by the SPM method with an average absolute error in the range of 1.95 e2.15 TECU in 2015 and 0.59 e0.98 TECU in 2008, a relative RMS error in the range of 17 e21% in 2015, 11.5 e15% in 2008. For the proposed short-term prediction method, these errors were 2.04 e2.2 TECU and 12 e14% in 2015 and 0.7 e1.0 TECU, 7 e11% in 2008. Using medians, the errors were 3.1 e3.4 TECU and 17 e21% in 2015 and 1.0 e1.3 TECU, 10 e15% in 2008. The dependence of results on the Dst-index was obtained.

Prediction method of highway pavement rutting based on the grey theory

In order to make a scientific pavement maintenance decision, a grey-theory-based prediction methodological framework is proposed to predict pavement performance. Based on the field pavement rutting data,analysis of variance （ANOVA）was first used to study the influence of different factors on pavement rutting. Cluster analysis was then employed to investigate the rutting development trend.Based on the clustering results,the grey theory was applied to build pavement rutting models for each cluster, which can effectively reduce the complexity of the predictive model.The results show that axial load and asphalt binder type play important roles in rutting development.The prediction model is capable of capturing the uncertainty in the pavement performance prediction process and can meet the requirements of highway pavement maintenance,and,therefore,has a wide application prospects.

Projectile impact point prediction method based on GRNN

In order to forecast projectile impact points quickly and accurately,aprojectile impact point prediction method based on generalized regression neural network（GRNN）is presented.Firstly,the model of GRNN forecasting impact point is established;secondly,the particle swarm algorithm（PSD）is used to optimize the smooth factor in the prediction model and then the optimal GRNN impact point prediction model is obtained.Finally,the numerical simulation of this prediction model is carried out.Simulation results show that the maximum range error is no more than 40 m,and the lateral deviation error is less than0.2m.The average time of impact point prediction is 6.645 ms,which is 1 300.623 ms less than that of numerical integration method.Therefore,it is feasible and effective for the proposed method to forecast projectile impact points,and thus it can provide a theoretical reference for practical engineering applications.

Data-driven casting defect prediction model for sand casting based on random forest classification algorithm

The complex sand-casting process combined with the interactions between process parameters makes it difficult to control the casting quality,resulting in a high scrap rate.A strategy based on a data-driven model was proposed to reduce casting defects and improve production efficiency,which includes the random forest(RF)classification model,the feature importance analysis,and the process parameters optimization with Monte Carlo simulation.The collected data includes four types of defects and corresponding process parameters were used to construct the RF model.Classification results show a recall rate above 90% for all categories.The Gini Index was used to assess the importance of the process parameters in the formation of various defects in the RF model.Finally,the classification model was applied to different production conditions for quality prediction.In the case of process parameters optimization for gas porosity defects,this model serves as an experimental process in the Monte Carlo method to estimate a better temperature distribution.The prediction model,when applied to the factory,greatly improved the efficiency of defect detection.Results show that the scrap rate decreased from 10.16% to 6.68%.

A Correction Method Suitable for Dynamical Seasonal Prediction

Based on the hindcast results of summer rainfall anomalies over China for the period 1981-2000 by the Dynamical Climate Prediction System （IAP-DCP） developed by the Institute of Atmospheric Physics, a correction method that can account for the dependence of model＇s systematic biases on SST anomalies is proposed. It is shown that this correction method can improve the hindcast skill of the IAP-DCP for summer rainfall anomalies over China, especially in western China and southeast China, which may imply its potential application to real-time seasonal prediction.

A prediction method for the performance of a low-recoil gun with front nozzle

One of the greatest challenges in the design of a gun is to balance muzzle velocity and recoil,especially for guns on aircrafts and deployable vehicles.To resolve the conflict between gun power and recoil force,a concept of rarefaction wave gun(RAVEN)was proposed to significantly reduce the weapon recoil and the heat in barrel,while minimally reducing the muzzle velocity.The main principle of RAVEN is that the rarefaction wave will not reach the projectile base until the muzzle by delaying the venting time of an expansion nozzle at the breech.Developed on the RAVEN principle,the purpose of this paper is to provide an engineering method for predicting the performance of a low-recoil gun with front nozzle.First,a two-dimensional two-phase flow model of interior ballistic during the RAVEN firing cycle was established.Numerical simulation results were compared with the published data to validate the reliability and accuracy.Next,the effects of the vent opening times and locations were investigated to determine the influence rules on the performance of the RAVEN with front nozzle.Then according to the results above,simple nonlinear fitting formulas were provided to explain how the muzzle velocity and the recoil force change with the vent opening time and location.Finally,a better vent venting opening time corresponding to the vent location was proposed.The findings should make an important contribution to the field of engineering applications of the RAVEN.

Analogue correction method of errors and its application to numerical weather prediction

In this paper, an analogue correction method of errors （ACE） based on a complicated atmospheric model is further developed and applied to numerical weather prediction （NWP）. The analysis shows that the ACE can effectively reduce model errors by combining the statistical analogue method with the dynamical model together in order that the information of plenty of historical data is utilized in the current complicated NWP model, Furthermore, in the ACE, the differences of the similarities between different historical analogues and the current initial state are considered as the weights for estimating model errors. The results of daily, decad and monthly prediction experiments on a complicated T63 atmospheric model show that the performance of the ACE by correcting model errors based on the estimation of the errors of 4 historical analogue predictions is not only better than that of the scheme of only introducing the correction of the errors of every single analogue prediction, but is also better than that of the T63 model.

The CALYPSO methodology for structure prediction

Structure prediction methods have been widely used as a state-of-the-art tool for structure searches and materials discovery, leading to many theory-driven breakthroughs on discoveries of new materials. These methods generally involve the exploration of the potential energy surfaces of materials through various structure sampling techniques and optimization algorithms in conjunction with quantum mechanical calculations. By taking advantage of the general feature of materials potential energy surface and swarm-intelligence-based global optimization algorithms, we have developed the CALYPSO method for structure prediction, which has been widely used in fields as diverse as computational physics, chemistry, and materials science. In this review, we provide the basic theory of the CALYPSO method, placing particular emphasis on the principles of its various structure dealing methods. We also survey the current challenges faced by structure prediction methods and include an outlook on the future developments of CALYPSO in the conclusions.

An influence function method based subsidence prediction program for longwall mining operations in inclined coal seams

The distribution of the final surface subsidence basin induced by longwall operations in inclined coal seam could be significantly different from that in flat coal seam and demands special prediction methods. Though many empirical prediction methods have been developed, these methods are inflexible for varying geological and mining conditions. An influence function method has been developed to take the advantage of its fundamentally sound nature and flexibility. In developing this method, significant modifications have been made to the original Knothe function to produce an asymmetrical influence function. The empirical equations for final subsidence parameters derived from US subsidence data and Chinese empirical values have been incorpo- rated into the mathematical models to improve the prediction accuracy. A corresponding computer program is developed. A number of subsidence cases for longwall mining operations in coal seams with varying inclination angles have been used to demonstrate the applicability of the developed subsidence prediction model.

A simplified method for prediction of embankment settlement in clays

The prediction of embankment settlement is a critically important issue for the serviceability of subgrade projects,especially the post-construction settlement.A number of methods have been proposed to predict embankment settlement;however,all of these methods are based on a parameter,i.e.the initial time point.The difference of the initial time point determined by different designers can de?nitely induce errors in prediction of embankment settlement.This paper proposed a concept named"potential settlement"and a simpli?ed method based on the in situ data.The key parameter"b"in the proposed method was veri?ed using theoretical method and?eld data.Finally,an example was used to demonstrate the advantages of the proposed method by comparing with other methods and the observation data.

A systematic machine learning method for reservoir identification and production prediction

Reservoir identification and production prediction are two of the most important tasks in petroleum exploration and development.Machine learning(ML)methods are used for petroleum-related studies,but have not been applied to reservoir identification and production prediction based on reservoir identification.Production forecasting studies are typically based on overall reservoir thickness and lack accuracy when reservoirs contain a water or dry layer without oil production.In this paper,a systematic ML method was developed using classification models for reservoir identification,and regression models for production prediction.The production models are based on the reservoir identification results.To realize the reservoir identification,seven optimized ML methods were used:four typical single ML methods and three ensemble ML methods.These methods classify the reservoir into five types of layers:water,dry and three levels of oil(I oil layer,II oil layer,III oil layer).The validation and test results of these seven optimized ML methods suggest the three ensemble methods perform better than the four single ML methods in reservoir identification.The XGBoost produced the model with the highest accuracy;up to 99%.The effective thickness of I and II oil layers determined during the reservoir identification was fed into the models for predicting production.Effective thickness considers the distribution of the water and the oil resulting in a more reasonable production prediction compared to predictions based on the overall reservoir thickness.To validate the superiority of the ML methods,reference models using overall reservoir thickness were built for comparison.The models based on effective thickness outperformed the reference models in every evaluation metric.The prediction accuracy of the ML models using effective thickness were 10%higher than that of reference model.Without the personal error or data distortion existing in traditional methods,this novel system realizes rapid analysis of data while reducing the time required to resolve reservoir classification and production prediction challenges.The ML models using the effective thickness obtained from reservoir identification were more accurate when predicting oil production compared to previous studies which use overall reservoir thickness.

Theory and Method of Mineral Resource Prediction Based on Synthetic Information

Metallogenic prognosis of synthetic information uses the geological body and the mineral resource body as a statistical unit to interpret synthetically the information of geology, geophysics, geochemistry and remote sensing from the evolution of geology and puts all the information into one entire system by drawing up digitalized interpretation maps of the synthetic information. On such basis, different grades and types of mineral resource prospecting models and predictive models of synthetic information can be established. Hence, a new integrated prediction system will be formed of metallogenic prognosis (qualitative prediction), mineral resources statistic prediction (determining targets) and mineral resources prediction (determining resources amount).