With the development of multi-signal monitoring technology,the research on multiple signal analysis and processing has become a hot subject.Mechanical equipment often works under variable working conditions,and the ac...With the development of multi-signal monitoring technology,the research on multiple signal analysis and processing has become a hot subject.Mechanical equipment often works under variable working conditions,and the acquired vibration signals are often non-stationary and nonlinear,which are difficult to be processed by traditional analysis methods.In order to solve the noise reduction problem of multiple signals under variable speed,a COT-DCS method combining the Computed Order Tracking(COT)based on Chirplet Path Pursuit(CPP)and Distributed Compressed Sensing(DCS)is proposed.Firstly,the instantaneous frequency(IF)is extracted by CPP,and the speed is obtained by fitting.Then,the speed is used for equal angle sampling of time-domain signals,and angle-domain signals are obtained by COT without a tachometer to eliminate the nonstationarity,and the angledomain signals are compressed and reconstructed by DCS to achieve noise reduction of multiple signals.The accuracy of the CPP method is verified by simulated,experimental signals and compared with some existing IF extraction methods.The COT method also shows good signal stabilization ability through simulation and experiment.Finally,combined with the comparative test of the other two algorithms and four noise reduction effect indicators,the COT-DCS based on the CPP method combines the advantages of the two algorithms and has better noise reduction effect and stability.It is shown that this method is an effective multi-signal noise reduction method.展开更多
振动信号分析是轴承故障诊断中的重要技术手段之一。变转速工况下的滚动轴承振动信号是典型的非平稳信号,并且在转频变化较小的工况中还存在噪声干扰的问题,使传统的时频分析技术难以应用。为解决该问题,提出了一种基于经验最优包络(emp...振动信号分析是轴承故障诊断中的重要技术手段之一。变转速工况下的滚动轴承振动信号是典型的非平稳信号,并且在转频变化较小的工况中还存在噪声干扰的问题,使传统的时频分析技术难以应用。为解决该问题,提出了一种基于经验最优包络(empirical optimal envelope,EOE)的局部均值分解(local mean decomposition,LMD)和采用分段线性插值的计算阶次跟踪(computing order tracking,COT)算法相结合的故障诊断方法。首先,确定低通滤波器的截止频率和滤波阶数,对滚动轴承振动信号进行滤波,并对滤波后的包络信号进行COT,以获得角域平稳信号。然后,利用EOE_LMD对重采样后的平稳信号进行处理,得到若干乘积函数(product function,PF)分量。最后,通过计算各分量的信息熵和相关系数,选取合适的分量进行阶次分析,以判断变转速滚动轴承的故障类型。结果表明,该方法可以消除转速波动对故障特征提取的影响,在不同转速变化条件下对滚动轴承具有良好的故障诊断能力。展开更多
为解决变转速工况滚动轴承微弱故障特征难以提取的问题,提出了时时(time-time,TT)变换结合计算阶比跟踪(computed order tracking,COT)的滚动轴承时变微弱故障特征提取方法。首先对变转速状态的轴承微弱故障信号进行时时变换,得到反映...为解决变转速工况滚动轴承微弱故障特征难以提取的问题,提出了时时(time-time,TT)变换结合计算阶比跟踪(computed order tracking,COT)的滚动轴承时变微弱故障特征提取方法。首先对变转速状态的轴承微弱故障信号进行时时变换,得到反映故障信号二维时时特征的TT变换矩阵。为消除TT变换矩阵的冗余性,提出了基于峭度准则的奇异值分解(singular value decomposition,SVD)方法对TT变换矩阵降噪。然后对降噪后的TT变换矩阵实施TT反变换,获取滚动轴承时变故障特征增强信号。最后对增强信号进行COT分析得到其包络阶比谱,从而提取滚动轴承的故障特征阶次。对仿真信号和实验测试信号进行分析验证,均实现了滚动轴承变转速工况故障类型的精确识别,分析效果优于包络阶比谱方法,证明了该方法的有效性。展开更多
皮卫星具有成本低、反应灵敏等特点,是航天领域的研究热点。由于体积和质量的限制,大卫星复杂的星载计算机系统结构并不适用于皮卫星。介绍基于COTS器件的皮卫星星载计算机系统模块化设计技术,将多准则决策方法 TOPSIS排序法应用于皮卫...皮卫星具有成本低、反应灵敏等特点,是航天领域的研究热点。由于体积和质量的限制,大卫星复杂的星载计算机系统结构并不适用于皮卫星。介绍基于COTS器件的皮卫星星载计算机系统模块化设计技术,将多准则决策方法 TOPSIS排序法应用于皮卫星的芯片选型。研制2版基于不同低功耗微控制单元的计算机原理样机,并通过大量实验测试比较2版原理样机的速度、功耗、运行温度等性能。当工作温度为27℃,主频为8 MHz时,基于MSP430芯片和ATxmega芯片的原理样机的MIPS值分别为7.449和6.781;运行加法运算的时间分别为0.613μs和1.381μs,功耗分别为38.224 m W和54.411 m W。在-40℃-85℃时,原理样机均可正常工作。展开更多
基金the financial support of this work by the National Natural Science Foundation of Hebei Province China under Grant E2020208052.
文摘With the development of multi-signal monitoring technology,the research on multiple signal analysis and processing has become a hot subject.Mechanical equipment often works under variable working conditions,and the acquired vibration signals are often non-stationary and nonlinear,which are difficult to be processed by traditional analysis methods.In order to solve the noise reduction problem of multiple signals under variable speed,a COT-DCS method combining the Computed Order Tracking(COT)based on Chirplet Path Pursuit(CPP)and Distributed Compressed Sensing(DCS)is proposed.Firstly,the instantaneous frequency(IF)is extracted by CPP,and the speed is obtained by fitting.Then,the speed is used for equal angle sampling of time-domain signals,and angle-domain signals are obtained by COT without a tachometer to eliminate the nonstationarity,and the angledomain signals are compressed and reconstructed by DCS to achieve noise reduction of multiple signals.The accuracy of the CPP method is verified by simulated,experimental signals and compared with some existing IF extraction methods.The COT method also shows good signal stabilization ability through simulation and experiment.Finally,combined with the comparative test of the other two algorithms and four noise reduction effect indicators,the COT-DCS based on the CPP method combines the advantages of the two algorithms and has better noise reduction effect and stability.It is shown that this method is an effective multi-signal noise reduction method.
文摘振动信号分析是轴承故障诊断中的重要技术手段之一。变转速工况下的滚动轴承振动信号是典型的非平稳信号,并且在转频变化较小的工况中还存在噪声干扰的问题,使传统的时频分析技术难以应用。为解决该问题,提出了一种基于经验最优包络(empirical optimal envelope,EOE)的局部均值分解(local mean decomposition,LMD)和采用分段线性插值的计算阶次跟踪(computing order tracking,COT)算法相结合的故障诊断方法。首先,确定低通滤波器的截止频率和滤波阶数,对滚动轴承振动信号进行滤波,并对滤波后的包络信号进行COT,以获得角域平稳信号。然后,利用EOE_LMD对重采样后的平稳信号进行处理,得到若干乘积函数(product function,PF)分量。最后,通过计算各分量的信息熵和相关系数,选取合适的分量进行阶次分析,以判断变转速滚动轴承的故障类型。结果表明,该方法可以消除转速波动对故障特征提取的影响,在不同转速变化条件下对滚动轴承具有良好的故障诊断能力。
文摘为解决变转速工况滚动轴承微弱故障特征难以提取的问题,提出了时时(time-time,TT)变换结合计算阶比跟踪(computed order tracking,COT)的滚动轴承时变微弱故障特征提取方法。首先对变转速状态的轴承微弱故障信号进行时时变换,得到反映故障信号二维时时特征的TT变换矩阵。为消除TT变换矩阵的冗余性,提出了基于峭度准则的奇异值分解(singular value decomposition,SVD)方法对TT变换矩阵降噪。然后对降噪后的TT变换矩阵实施TT反变换,获取滚动轴承时变故障特征增强信号。最后对增强信号进行COT分析得到其包络阶比谱,从而提取滚动轴承的故障特征阶次。对仿真信号和实验测试信号进行分析验证,均实现了滚动轴承变转速工况故障类型的精确识别,分析效果优于包络阶比谱方法,证明了该方法的有效性。
文摘皮卫星具有成本低、反应灵敏等特点,是航天领域的研究热点。由于体积和质量的限制,大卫星复杂的星载计算机系统结构并不适用于皮卫星。介绍基于COTS器件的皮卫星星载计算机系统模块化设计技术,将多准则决策方法 TOPSIS排序法应用于皮卫星的芯片选型。研制2版基于不同低功耗微控制单元的计算机原理样机,并通过大量实验测试比较2版原理样机的速度、功耗、运行温度等性能。当工作温度为27℃,主频为8 MHz时,基于MSP430芯片和ATxmega芯片的原理样机的MIPS值分别为7.449和6.781;运行加法运算的时间分别为0.613μs和1.381μs,功耗分别为38.224 m W和54.411 m W。在-40℃-85℃时,原理样机均可正常工作。
