期刊文献+
共找到12,112篇文章
< 1 2 250 >
每页显示 20 50 100
An intelligent control method based on artificial neural network for numerical flight simulation of the basic finner projectile with pitching maneuver
1
作者 Yiming Liang Guangning Li +3 位作者 Min Xu Junmin Zhao Feng Hao Hongbo Shi 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2024年第2期663-674,共12页
In this paper,an intelligent control method applying on numerical virtual flight is proposed.The proposed algorithm is verified and evaluated by combining with the case of the basic finner projectile model and shows a... In this paper,an intelligent control method applying on numerical virtual flight is proposed.The proposed algorithm is verified and evaluated by combining with the case of the basic finner projectile model and shows a good application prospect.Firstly,a numerical virtual flight simulation model based on overlapping dynamic mesh technology is constructed.In order to verify the accuracy of the dynamic grid technology and the calculation of unsteady flow,a numerical simulation of the basic finner projectile without control is carried out.The simulation results are in good agreement with the experiment data which shows that the algorithm used in this paper can also be used in the design and evaluation of the intelligent controller in the numerical virtual flight simulation.Secondly,combined with the real-time control requirements of aerodynamic,attitude and displacement parameters of the projectile during the flight process,the numerical simulations of the basic finner projectile’s pitch channel are carried out under the traditional PID(Proportional-Integral-Derivative)control strategy and the intelligent PID control strategy respectively.The intelligent PID controller based on BP(Back Propagation)neural network can realize online learning and self-optimization of control parameters according to the acquired real-time flight parameters.Compared with the traditional PID controller,the concerned control variable overshoot,rise time,transition time and steady state error and other performance indicators have been greatly improved,and the higher the learning efficiency or the inertia coefficient,the faster the system,the larger the overshoot,and the smaller the stability error.The intelligent control method applying on numerical virtual flight is capable of solving the complicated unsteady motion and flow with the intelligent PID control strategy and has a strong promotion to engineering application. 展开更多
关键词 numerical virtual flight Intelligent control BP neural network PID Moving chimera grid
下载PDF
Numerical Investigation of Thermal Behavior of CNC Machine Tool and Its Effects on Dimensional Accuracy of Machined Parts
2
作者 Erick Matezo-Ngoma Abderrazak El Ouafi Ahmed Chebak 《Journal of Software Engineering and Applications》 2024年第8期617-637,共21页
The dimensional accuracy of machined parts is strongly influenced by the thermal behavior of machine tools (MT). Minimizing this influence represents a key objective for any modern manufacturing industry. Thermally in... The dimensional accuracy of machined parts is strongly influenced by the thermal behavior of machine tools (MT). Minimizing this influence represents a key objective for any modern manufacturing industry. Thermally induced positioning error compensation remains the most effective and practical method in this context. However, the efficiency of the compensation process depends on the quality of the model used to predict the thermal errors. The model should consistently reflect the relationships between temperature distribution in the MT structure and thermally induced positioning errors. A judicious choice of the number and location of temperature sensitive points to represent heat distribution is a key factor for robust thermal error modeling. Therefore, in this paper, the temperature sensitive points are selected following a structured thermomechanical analysis carried out to evaluate the effects of various temperature gradients on MT structure deformation intensity. The MT thermal behavior is first modeled using finite element method and validated by various experimentally measured temperature fields using temperature sensors and thermal imaging. MT Thermal behavior validation shows a maximum error of less than 10% when comparing the numerical estimations with the experimental results even under changing operation conditions. The numerical model is used through several series of simulations carried out using varied working condition to explore possible relationships between temperature distribution and thermal deformation characteristics to select the most appropriate temperature sensitive points that will be considered for building an empirical prediction model for thermal errors as function of MT thermal state. Validation tests achieved using an artificial neural network based simplified model confirmed the efficiency of the proposed temperature sensitive points allowing the prediction of the thermally induced errors with an accuracy greater than 90%. 展开更多
关键词 cnc Machine Tool Dimensional Accuracy Thermal Errors Error Modelling numerical Simulation Finite Element Method Artificial Neural Network Error Compensation
下载PDF
Analysis of debris flow control effect and hazard assessment in Xinqiao Gully,Wenchuan M_(s)8.0 earthquake area based on numerical simulation
3
作者 Chang Yang Yong-bo Tie +3 位作者 Xian-zheng Zhang Yan-feng Zhang Zhi-jie Ning Zong-liang Li 《China Geology》 CAS CSCD 2024年第2期248-263,共16页
Xinqiao Gully is located in the area of the 2008 Wenchuan M_(s)8.0 earthquake in Sichuan province,China.Based on the investigation of the 2023"6-26"Xinqiao Gully debris flow event,this study assessed the eff... Xinqiao Gully is located in the area of the 2008 Wenchuan M_(s)8.0 earthquake in Sichuan province,China.Based on the investigation of the 2023"6-26"Xinqiao Gully debris flow event,this study assessed the effectiveness of the debris flow control project and evaluated the debris flow hazards.Through field investigation and numerical simulation methods,the indicators of flow intensity reduction rate and storage capacity fullness were proposed to quantify the effectiveness of the engineering measures in the debris flow event.The simulation results show that the debris flow control project reduced the flow intensity by41.05%to 64.61%.The storage capacity of the dam decreases gradually from upstream to the mouth of the gully,thus effectively intercepting and controlling the debris flow.By evaluating the debris flow of different recurrence intervals,further measures are recommended for managing debris flow events. 展开更多
关键词 Landslide Debris flow Hazard assessment numerical simulation OpenLISEM Prevention and control project Wenchuan M_(s)8.0 earthquake Xinqiao Gully Sichuan province Geological hazards survey engineering
下载PDF
Performance analysis model for real-time Ethernet-based computer numerical control system 被引量:2
4
作者 万加富 李迪 +1 位作者 涂钰青 张春华 《Journal of Central South University》 SCIE EI CAS 2011年第5期1545-1553,共9页
In order to optimize the embedded system implementation for Ethernet-based computer numerical control (CNC) system, it is very necessary to establish the performance analysis model and further adopt the codesign met... In order to optimize the embedded system implementation for Ethernet-based computer numerical control (CNC) system, it is very necessary to establish the performance analysis model and further adopt the codesign method from the control, communication and computing perspectives. On the basis of analyzing real-time Ethemet, system architecture, time characteristic parameters of control-loop ere, a performance analysis model for real-time Ethemet-based CNC system was proposed, which is able to include the timing effects caused by the implementation platform in the simulation. The key for establishing the model is accomplished by designing the error analysis module and the controller nodes. Under the restraint of CPU resource and communication bandwidth, the experiment with a case study was conducted, and the results show that if the deadline miss ratio of data packets is 0.2%, then the percentage error is 1.105%. The proposed model can be used at several stages of CNC system development. 展开更多
关键词 computer numerical control cnc system real-time Ethemet time characteristic parameters performance analysis model manufacturing accuracy
下载PDF
Cross-section distortion and springback characteristics of double-cavity aluminum profile in force controlled stretch-bending
5
作者 Zhi-wen LIU Zi-xuan DONG +2 位作者 Cong-chang XU Jie YI Luo-xing LI 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2024年第8期2476-2490,共15页
3D elastic-plastic FE model for simulating the force controlled stretch-bending process of double-cavity aluminum profile was established using hybrid explicit−implicit solvent method.Considering the computational acc... 3D elastic-plastic FE model for simulating the force controlled stretch-bending process of double-cavity aluminum profile was established using hybrid explicit−implicit solvent method.Considering the computational accuracy and efficiency,the optimal choices of numerical parameters and algorithms in FE modelling were determined.The formation mechanisms of cross-section distortion and springback were revealed.The effects of pre-stretching,post-stretching,friction,and the addition of internal fillers on forming quality were investigated.The results show that the stress state of profile in stretch-bending is uniaxial with only a circumferential stress.The stress distribution along the length direction of profile is non-uniform and the maximum tensile stress is located at a certain distance away from the center of profile.As aluminum profile is gradually attached to bending die,the distribution characteristic of cross-section distortion along the length direction of profile changes from V-shape to W-shape.After unloading the forming tools,cross-section distortion decreases obviously due to the stress relaxation,with a maximum distortion difference of 13%before and after unloading.As pre-stretching and post-stretching forces increase,cross-section distortion increases gradually,while springback first decreases and then remains unchanged.With increasing friction between bending die and profile,cross-section distortion slightly decreases,while springback increases.Cross-section distortion decreases by 83%with adding PVC fillers into the cavities of profile,while springback increases by 192.2%. 展开更多
关键词 hollow aluminum profile force controlled stretch-bending numerical parameters springback analysis approach cross-section distortion SPRINGBACK process parameters
下载PDF
Real-Time Data and Visualization Monitoring of Computer Numerical Control Machine Tools Based on Hyper Text Markup Language 5
6
作者 WU Yan XIAO Lijun +2 位作者 DING Xiaoying WANG Bing ZHANG Jieren 《Journal of Donghua University(English Edition)》 EI CAS 2019年第3期261-266,共6页
In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML... In order to ensure the safety,quality and efficiency of computer numerical control(CNC)machine tool processing,a real-time monitoring and visible solution for CNC machine tools based on hyper text markup language(HTML)5 is proposed.The characteristics of the real-time monitoring technology of CNC machine tools under the traditional Client/Server(C/S)structure are compared and analyzed,and the technical drawbacks are proposed.Web real-time communication technology and browser drawing technology are deeply studied.A real-time monitoring and visible system for CNC machine tool data is developed based on Metro platform,combining WebSocket real-time communication technology and Canvas drawing technology.The system architecture is given,and the functions and implementation methods of the system are described in detail.The practical application results show that the WebSocket real-time communication technology can effectively reduce the bandwidth and network delay and save server resources.The numerical control machine data monitoring system can intuitively reflect the machine data,and the visible effect is good.It realizes timely monitoring of equipment alarms and prompts maintenance and management personnel. 展开更多
关键词 computer numerical control(cnc) machine tools real-time MONITORING VISUALIZATION hyper text MARKUP language(HTML)5 WebSocket CANVAS
下载PDF
Java Language for Numerical Control Simulation System Research
7
作者 LI Lei LI Hongmei ZHOU Huiqiang 《International Journal of Plant Engineering and Management》 2023年第3期166-179,共14页
Java language is widely used in a variety of development platforms to develop all kinds of application software for its simple and efficient.The programming language owning platform independent is adopted to solve the... Java language is widely used in a variety of development platforms to develop all kinds of application software for its simple and efficient.The programming language owning platform independent is adopted to solve the image flicker,sound loading and other issues by the threading technology,multimedia technology,graphics and point by point comparison techniques.Dynamic real⁃time process simulation is implemented and a two⁃dimensional network of CNC machining simulation system is developed while Java applet application is as a carrier.The simulation results show that the system has a friendly interface and fast calculation speed,and platform portability has a certain practicality and application value. 展开更多
关键词 network numerical control(NC) Java language by⁃point comparison interpolation SIMULATION
下载PDF
Lax-Oleinik-Type Formulas and Efficient Algorithms for Certain High-Dimensional Optimal Control Problems
8
作者 Paula Chen Jerome Darbon Tingwei Meng 《Communications on Applied Mathematics and Computation》 EI 2024年第2期1428-1471,共44页
Two of the main challenges in optimal control are solving problems with state-dependent running costs and developing efficient numerical solvers that are computationally tractable in high dimensions.In this paper,we p... Two of the main challenges in optimal control are solving problems with state-dependent running costs and developing efficient numerical solvers that are computationally tractable in high dimensions.In this paper,we provide analytical solutions to certain optimal control problems whose running cost depends on the state variable and with constraints on the control.We also provide Lax-Oleinik-type representation formulas for the corresponding Hamilton-Jacobi partial differential equations with state-dependent Hamiltonians.Additionally,we present an efficient,grid-free numerical solver based on our representation formulas,which is shown to scale linearly with the state dimension,and thus,to overcome the curse of dimensionality.Using existing optimization methods and the min-plus technique,we extend our numerical solvers to address more general classes of convex and nonconvex initial costs.We demonstrate the capabilities of our numerical solvers using implementations on a central processing unit(CPU)and a field-programmable gate array(FPGA).In several cases,our FPGA implementation obtains over a 10 times speedup compared to the CPU,which demonstrates the promising performance boosts FPGAs can achieve.Our numerical results show that our solvers have the potential to serve as a building block for solving broader classes of high-dimensional optimal control problems in real-time. 展开更多
关键词 Optimal control Hamilton-Jacobi partial differential equations Grid-free numerical methods High dimensions Field-programmable gate arrays(FPGAs)
下载PDF
Discussion on Reverse Design of Components with Complex Curved Surface and Computer Numerical Control Machining
9
作者 Dapeng Fu Xinyu Lv Shuangyang Jiang 《Journal of Electronic Research and Application》 2018年第4期14-18,共5页
With the continuous development and advancement of science and technology,the work of tool path planning has received extensive attention.Among them,curved surface generation and data processing are the focus of manag... With the continuous development and advancement of science and technology,the work of tool path planning has received extensive attention.Among them,curved surface generation and data processing are the focus of management and design,which necessitate the full application of reverse design of complex curved surface components to complete numerical control processing,effective optimization and upgrading,integration the tasks of point cloud data collection,and point cloud data processing to ensure that the corresponding computer numerical control machining model can exert its actual value.This paper briefly analyzes the basic principles of curved surface reconstruction as well as discusses the reverse design of complex curved components and the experimental processes and results that involved computer numerical control machining,which serves the purpose as reference only. 展开更多
关键词 complex curved surface COMPONENT REVERSE design computer numerical control MACHINING
下载PDF
An Investigation into the Life Cycle Cost of a Typical Computer Numerical Control Machine
10
作者 Liang Gongqian Liu WanxiaSchool of Management Northwestern Polytechnic University Xi’an, 710072, Shaanxi, P.R.China 《International Journal of Plant Engineering and Management》 1997年第2期32-38,共7页
This paper relates to a typical computer numerical control (CNC) machine, model FDXNC 128, and analyzes the payoff period quantitatively and forecasts the future maintenance cost and the evaluation of the economic be... This paper relates to a typical computer numerical control (CNC) machine, model FDXNC 128, and analyzes the payoff period quantitatively and forecasts the future maintenance cost and the evaluation of the economic benefit by using Life Cycle Cost (LCC) method and grey theory. The discussion shows conclusions that are beneficial to the production, management, and decision making of the enterprise. 展开更多
关键词 numerical control machine life cycle cost benefit.
下载PDF
柔性模块化CNC工装在离散型制造中的应用
11
作者 廖益蓝 周传昆 +2 位作者 戴志杰 陆凯雷 王宇昊 《现代制造技术与装备》 2024年第8期201-203,共3页
电力装备零件加工具有小批量、多品种、加工复杂度不高的离散型制造特性,但频繁的装夹和换型调试会严重影响设备综合效率(Overall Equipment Effectiveness,OEE),导致加工效率偏低。研究结果表明:通过柔性组合工装设计,将大部分装夹过... 电力装备零件加工具有小批量、多品种、加工复杂度不高的离散型制造特性,但频繁的装夹和换型调试会严重影响设备综合效率(Overall Equipment Effectiveness,OEE),导致加工效率偏低。研究结果表明:通过柔性组合工装设计,将大部分装夹过程转移至设备外,可减少停机等待时间;通过模块化安装节点设计,快速提升工装安装速度,可缩短换型时间。通过对某数控机床(Computer Numerical Control,CNC)设备的工装进行柔性模块化改造,产品装夹时间和换型时间分别缩短了56.71%和41.18%,设备OEE水平提升了26.17%。经过3年推广应用,企业CNC设备的OEE已由45%~55%提升为70%~80%,产品交付效率显著提高,产品竞争力逐步增强。此外,该柔性模块化工装改造新模式,可为国内广大制造业厂家提供一种新的降本增效思路。 展开更多
关键词 设备综合效率(OEE) 柔性 模块化 数控机床(cnc) 工装
下载PDF
高速动车组铝合金零件CNC铣削加工工艺研究
12
作者 陈海权 《现代制造技术与装备》 2024年第8期138-140,共3页
高速动车组应用了较多铝合金零件。此类零件存在较高的加工装夹难度,若无法准确把握加工工艺,易出现加工缺陷。结合铝合金零件性能,详细分析零件计算机数字控制机床(Computer Numerical Control,CNC)铣削加工工艺特点,并从多个角度研究... 高速动车组应用了较多铝合金零件。此类零件存在较高的加工装夹难度,若无法准确把握加工工艺,易出现加工缺陷。结合铝合金零件性能,详细分析零件计算机数字控制机床(Computer Numerical Control,CNC)铣削加工工艺特点,并从多个角度研究铝合金零件的CNC铣削加工工艺及其热处理技术。合理优化加工参数和热处理技术,可提高铝合金零件的加工质量和机械性能,促进高速动车组铝合金零件加工工艺水平的提升,进而推动我国高速动车组的发展。 展开更多
关键词 高速动车组 铝合金 零件 计算机数字控制机床(cnc) 铣削加工工艺
下载PDF
基于TL-DBN方法的CNC机床节能策略设计
13
作者 钟旭佳 李阳 宋佳佳 《现代工业经济和信息化》 2024年第9期135-136,140,共3页
为了提高数控机床节能性能,设计一种利用迁移学习方法实现数字控制机床(Computer numerical control,CNC)机床的节能控制过程。建立以随机森林(Random forest,RF)实现驱动功能的离散CNC机床能耗调控模型,减小等待阶段所消耗的能量,促进... 为了提高数控机床节能性能,设计一种利用迁移学习方法实现数字控制机床(Computer numerical control,CNC)机床的节能控制过程。建立以随机森林(Random forest,RF)实现驱动功能的离散CNC机床能耗调控模型,减小等待阶段所消耗的能量,促进机床决策效率的快速提升。研究结果表明,时间间隔对机床节能状态影响显著,当间隔增加后,机床由9次切换减少至6次切换,时间间隔设定在25 min最优。各机床都可以在等待阶段通过合适策略达到节能的控制过程,采用该节能控制方案为实现生产过程管控提供了理论依据。 展开更多
关键词 迁移学习 节能控制 cnc机床 深度置信网络
下载PDF
Effect of geometrical parameters on forming quality of high-strength TA18 titanium alloy tube in numerical control bending 被引量:6
14
作者 方军 梁闯 +1 位作者 鲁世强 王克鲁 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2018年第2期309-318,共10页
The forming quality of high-strength TA18 titanium alloy tube during numerical control bending in changing bending angle β, relative bending radius R/D and tube sizes such as diameter D and wall thickness t was clari... The forming quality of high-strength TA18 titanium alloy tube during numerical control bending in changing bending angle β, relative bending radius R/D and tube sizes such as diameter D and wall thickness t was clarified by finite element simulation. The results show that the distribution of wall thickness change ratio Δt and cross section deformation ratio ΔD are very similar under different β; the Δt and ΔD decrease with the increase of R/D, and to obtain the qualified bent tube, the R/D must be greater than 2.0; the wall thinning ratio Δto slightly increases with larger D and t, while the wall thickening ratio Δti and ΔD increase with the larger D and smaller t; the Δto and ΔD firstly decrease and then increase, while the Δti increases, for the same D/t with the increase of D and t. 展开更多
关键词 high-strength TA18 tube geometrical parameters forming quality finite element simulation numerical control bending
下载PDF
METHOD FOR SUPPRESSING CUTTING CHATTER IN NUMERICAL CONTROL MACHINE TOOLS
15
作者 孙宝寿 黄筱调 +3 位作者 顾伯勤 方成刚 丁文政 魏韬 《Transactions of Nanjing University of Aeronautics and Astronautics》 EI 2006年第2期108-114,共7页
A new method for suppressing cutting chatter is studied by adjusting servo parameters of the numerical control (NC) machine tool and controlling the limited cutting width. A model of the cutting system of the NC mac... A new method for suppressing cutting chatter is studied by adjusting servo parameters of the numerical control (NC) machine tool and controlling the limited cutting width. A model of the cutting system of the NC machine tool is established. It includes the mechanical system, the servo system and the cutting chatter system. Interactions between every two systems are shown in the model. The cutting system stability is simulated and relation curves between the limited cutting width and servo system parameters are described in the experiment. Simulation and experimental results show that there is a mapping relation between the limited cutting width and servo parameters of the NC machine tool, and the method is applicable and credible to suppress chatter. 展开更多
关键词 numerical control machine tool chatter servo parameter limited cutting width
下载PDF
利用CNC多维约束的S型速度规划
16
作者 吴继春 许可 +1 位作者 周会成 范大鹏 《计算机辅助设计与图形学学报》 EI CSCD 北大核心 2023年第9期1439-1449,共11页
经典控制模型中存在时间过耦合,而速度规划与实时轨迹控制都与时间关联,导致实时计算量、规划与控制协调性等不足的问题,提出利用CNC多维约束的S型速度规划方法.首先建立双重反馈的控制模型,内反馈继承经典控制模型将时间反馈到控制器,... 经典控制模型中存在时间过耦合,而速度规划与实时轨迹控制都与时间关联,导致实时计算量、规划与控制协调性等不足的问题,提出利用CNC多维约束的S型速度规划方法.首先建立双重反馈的控制模型,内反馈继承经典控制模型将时间反馈到控制器,外反馈将非时间反馈到规划器;然后将影响速度规划的因素分为时间相关与时间无关,与时间相关因素在控制器中实时控制,与时间无关因素在规划器中进行非时间速度规划;在规划器中建立基于轨迹路径长度、轨迹几何特性、运动参数以及程序行号等信息的多维约束模型;最后以路径长度代替时间作为运动参考量,结合多维约束模型,考虑轨迹的几何特性与路径长度映射关系,使轨迹特性与非时间建立具有空间性关联.通过MATLAB仿真对控制模型的抗干扰能力进行验证,并通过CODESYS软件编程和实验的结果表明,所提方法是可行和有效的. 展开更多
关键词 多维约束模型 数控系统 S型速度规划 双重反馈控制模型
下载PDF
Shaking table test and numerical analysis of offshore wind turbine tower systems controlled by TLCD 被引量:16
17
作者 Chen Jianbing Liu Youkun Bai Xueyuan 《Earthquake Engineering and Engineering Vibration》 SCIE EI CSCD 2015年第1期55-75,共21页
A wind turbine system equipped with a tuned liquid column damper (TLCD) is comprehensively studied via shaking table tests using a 1/13-scaled model. The effects of wind and wave actions are considered by inputting ... A wind turbine system equipped with a tuned liquid column damper (TLCD) is comprehensively studied via shaking table tests using a 1/13-scaled model. The effects of wind and wave actions are considered by inputting response- equivalent accelerations on the shaking table. The test results show that the control effect of the TLCD system is significant in reducing the responses under both wind-wave equivalent loads and ground motions, but obviously varies for different inputs, Further, a blade-hub-tower integrated numerical model for the wind turbine system is established. The model is capable of considering the rotational effect of blades by combining Kane's equation with the finite element method. The responses of the wind tower equipped with TLCD devices are numerically obtained and compared to the test results, showing that under both controlled and uncontrolled conditions with and without blades' rotation, the corresponding responses exhibit good agreement. This demonstrates that the proposed numerical model performs well in capturing the wind-wave coupled response of the offshore wind turbine systems under control. Both numerical and experimental results show that the TLCD system can significantly reduce the structural response and thus improve the safety and serviceability of the offshore wind turbine tower systems. Additional issues that require further study are discussed. 展开更多
关键词 offshore wind turbine shaking table test TLCD numerical model vibration control
下载PDF
Numerical modelling of structural controls on fluid flow and mineralization 被引量:13
18
作者 J.Robinson P.M.Schaubs 《Geoscience Frontiers》 SCIE CAS 2011年第3期449-461,共13页
This paper presents the results of a set of numerical models focussing on structural controls on hydrothermal mineralization. We first give an overview of natural phenomena of structurally-controlled ore formation and... This paper presents the results of a set of numerical models focussing on structural controls on hydrothermal mineralization. We first give an overview of natural phenomena of structurally-controlled ore formation and the background theory and mechanisms for such controls. We then provide the results of a group of simple 2D numerical models validated through comparison with Cu-vein structure observed near the Shilu Copper deposit (Yangchun, Guangdong Province, China) and finally a case study of 3D numerical modelling applied to the Hodgkinson Province in North Queensland (Australia). Two modelling approaches, discrete deformation modelling and continuum coupled deformation and fluid flow modelling, are involved. The 2D model-derived patterns are remarkably consistent with the Cu-vein structure from the Shilu Copper deposit, and show that both modelling approaches can realistically simulate the mechanical behaviours of shear and dilatant fractures. The continuum coupled deformation and fluid flow model indicates that pattern of the Cu- veins near the Shilu deposit is the result of shear strain localization, development of dilation and fluid focussing into the dilatant fracture segments. The 3D case-study models (with deformation and fluid flow coupling) on the Hodgkinson Province generated a number of potential gold mineralization 展开更多
关键词 Structural control DILATION Fluid flow MINERALIZATION numerical modelling Shilu Cu-deposit Hodgkinson Province
下载PDF
Underground ground control monitoring and interpretation,and numerical modeling, and shield capacity design 被引量:7
19
作者 Syd S.Peng Jingyi Cheng +1 位作者 Feng Du Yuting Xue 《International Journal of Mining Science and Technology》 EI CSCD 2019年第1期79-85,共7页
Mine or longwall panel layout is a 3D structure with highly non-uniform stress distribution. Recognition of such fact will facilitate underground problem identification/investigation and solving by numerical modeling ... Mine or longwall panel layout is a 3D structure with highly non-uniform stress distribution. Recognition of such fact will facilitate underground problem identification/investigation and solving by numerical modeling through proper model construction. Due to its versatility, numerical modeling is the most popular method for ground control design and problem solving. However numerical modeling results require highly experienced professionals to interpret its validity/applicability to actual mining operations due to complicated mining and geological conditions. Underground ground control monitoring is routinely performed to predict roof behavior such as weighting and weighting interval without matching observation of face mining condition while the mining pressures are being monitored, resulting in unrealistic interpretation of the obtained data on mining pressure. The importance of ground control pressure monitoring and simultaneous observation of mining and geological conditions is illustrated by an example of shield leg pressure monitoring and interpretation in an U.S. longwall coal mine: it was found that the roof strata act like a plate, not an individual block of the size of a shield dimension, as commonly assumed by all researchers and shield capacity is not a fixed property for a longwall panel or a mine or a coal seam. A new mechanism on the interaction between shield's hydraulic leg pressure and roof strata for shield loading is proposed. 展开更多
关键词 MINE structure Ground control MONITORING numerical modeling SHIELD LEG pressure Periodic weighting
下载PDF
NUMERICAL SOLUTION OF VISCOUS FLOW PAST A SOLID SPHERE WITH THE CONTROL VOLUME FORMULATION 被引量:4
20
作者 毛在砂 陈家镛 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 1997年第2期13-24,共12页
The control volume formulation with the QUICK finite difference scheme is used to solveincompressible liquid flow past a solid sphere in terms of stream function and vorticity.Several tech-nical points are addressed o... The control volume formulation with the QUICK finite difference scheme is used to solveincompressible liquid flow past a solid sphere in terms of stream function and vorticity.Several tech-nical points are addressed on improving the accuracy and efficiency of numerical simulation of similarproblems of fluid flow.In particular,the importance of suitable specification of the distortion func-tion to enforcing the far field boundarv conditions is emphasized. 展开更多
关键词 SPHERE LAMINAR flow numerical simulation control VOLUME FORMULATION QUICK scheme
下载PDF
上一页 1 2 250 下一页 到第
使用帮助 返回顶部