The isothermal extrusion process of hollow aluminium profile was investigated using incremental proportional-integral-derivative(PID)control algorithm and finite element simulations.The range of extrusion speed was de...The isothermal extrusion process of hollow aluminium profile was investigated using incremental proportional-integral-derivative(PID)control algorithm and finite element simulations.The range of extrusion speed was determined by considering the maximum extrusion load and production efficiency.By taking the optimal solution temperature of the secondary phase as the target temperature,the extrusion speed–stroke curve for realizing the isothermal extrusion of the aluminium profile was obtained.Results show that in the traditional constant extrusion speed process,the average temperature of the cross-section of the aluminium profile at the die exit rapidly increases and then slowly rises with the increase in ram displacement.As the extrusion speed increases,the temperature difference at the die exit of the profile along the extrusion direction increases.The exit temperature difference between the front and back ends of the extrudate along the extrusion direction obtained by adopting isothermal extrusion is about 6.9℃.Furthermore,the heat generated by plastic deformation and friction during extrusion is balanced with the heat transfer from the workpiece to the container,porthole die and external environment.展开更多
In this study, bioadhesive mini-matrices of natamycin were prepared for vaginal application by hot-melt extrusion. In addition, melt viscosity measurements, thermogravimetric analysis, in vitro drug release studies an...In this study, bioadhesive mini-matrices of natamycin were prepared for vaginal application by hot-melt extrusion. In addition, melt viscosity measurements, thermogravimetric analysis, in vitro drug release studies and in vitro mucoadhesion test were performed. High molecular weight grades of KlucelTM hydroxypropylcellulose were used as a thermoplastic polymer. TEC and PEG 400 were chosen as plasticizer. According to the obtained results of melt viscosity measurements, the maximum torque of extrudates prepared using PEG 400 increased with increasing drug loading. The thermo-gravimetric analyses showed that natamycin is stable up to 198℃ and this result gives the opportunity to hot melt extrussion process at 90℃. In vitro drug release results showed that the release was extended up to 72 hours and drug release rate increased with increasing drug loading. In respect to the in vitro mucoadhesion test results, the values of work of mucoadhesion were found high as 771,977 mN.mm, 753,199 mN.mm, 686,356 mN.mm for the prepared hot melt extruded mini-matrices. Our results showed that the developed formulations were found worthy of further studies.展开更多
The relevant results of thermodynamics simulation test, recrystallization study and FEM numercal simulation are described. A method is also introduced that the controlled hot forming is carried out by adopting the pro...The relevant results of thermodynamics simulation test, recrystallization study and FEM numercal simulation are described. A method is also introduced that the controlled hot forming is carried out by adopting the program of expansion-extrusion compound forming.展开更多
The purpose of computer-aided design of new adaptive pulsed arc technologies of welding is: to de- sign optimum algorithms of pulsed control over main energy parameters of welding.It permits:to in- crease welding ...The purpose of computer-aided design of new adaptive pulsed arc technologies of welding is: to de- sign optimum algorithms of pulsed control over main energy parameters of welding.It permits:to in- crease welding productivity, to stabilize the welding regime, to control weld formation,taking into ac- count its spatial position, to proveal specie strength of the welded and coatings. Computer- aided design reduces the time of development of new pulsed arc technology:provides the optimization of technological referes according to the operating conditions of welded joints,the prediction of the ser- vice life of the welds.The developed methodology of computer-aided design of advanced technologies, models, original software, adaptive algorithms of pulsed control, and spend equipment permits to regulate penetration,the weld shape, the sizes of heat - affected zone; to predict sired properties and quality of welded joints.展开更多
基金the financial supports from the National Natural Science Foundation of China(No.52005244)the Scientific Research Fund of Hunan Provincial Education Department,China(Nos.18B285,18B552)+1 种基金the Natural Science Foundation of Hunan Provincial,China(Nos.2019JJ50510,2019JJ70077)Young Scholars Program of Furong Scholar Program,China.
文摘The isothermal extrusion process of hollow aluminium profile was investigated using incremental proportional-integral-derivative(PID)control algorithm and finite element simulations.The range of extrusion speed was determined by considering the maximum extrusion load and production efficiency.By taking the optimal solution temperature of the secondary phase as the target temperature,the extrusion speed–stroke curve for realizing the isothermal extrusion of the aluminium profile was obtained.Results show that in the traditional constant extrusion speed process,the average temperature of the cross-section of the aluminium profile at the die exit rapidly increases and then slowly rises with the increase in ram displacement.As the extrusion speed increases,the temperature difference at the die exit of the profile along the extrusion direction increases.The exit temperature difference between the front and back ends of the extrudate along the extrusion direction obtained by adopting isothermal extrusion is about 6.9℃.Furthermore,the heat generated by plastic deformation and friction during extrusion is balanced with the heat transfer from the workpiece to the container,porthole die and external environment.
基金The authors would like to thank to Scientific and Technological Research Council of Turkey(TUBITAK)(115S476)for their supportThe authors also would like to thank to Pharmaceutical Sciences Research Centre(FABAL)for their support.
文摘In this study, bioadhesive mini-matrices of natamycin were prepared for vaginal application by hot-melt extrusion. In addition, melt viscosity measurements, thermogravimetric analysis, in vitro drug release studies and in vitro mucoadhesion test were performed. High molecular weight grades of KlucelTM hydroxypropylcellulose were used as a thermoplastic polymer. TEC and PEG 400 were chosen as plasticizer. According to the obtained results of melt viscosity measurements, the maximum torque of extrudates prepared using PEG 400 increased with increasing drug loading. The thermo-gravimetric analyses showed that natamycin is stable up to 198℃ and this result gives the opportunity to hot melt extrussion process at 90℃. In vitro drug release results showed that the release was extended up to 72 hours and drug release rate increased with increasing drug loading. In respect to the in vitro mucoadhesion test results, the values of work of mucoadhesion were found high as 771,977 mN.mm, 753,199 mN.mm, 686,356 mN.mm for the prepared hot melt extruded mini-matrices. Our results showed that the developed formulations were found worthy of further studies.
文摘The relevant results of thermodynamics simulation test, recrystallization study and FEM numercal simulation are described. A method is also introduced that the controlled hot forming is carried out by adopting the program of expansion-extrusion compound forming.
文摘The purpose of computer-aided design of new adaptive pulsed arc technologies of welding is: to de- sign optimum algorithms of pulsed control over main energy parameters of welding.It permits:to in- crease welding productivity, to stabilize the welding regime, to control weld formation,taking into ac- count its spatial position, to proveal specie strength of the welded and coatings. Computer- aided design reduces the time of development of new pulsed arc technology:provides the optimization of technological referes according to the operating conditions of welded joints,the prediction of the ser- vice life of the welds.The developed methodology of computer-aided design of advanced technologies, models, original software, adaptive algorithms of pulsed control, and spend equipment permits to regulate penetration,the weld shape, the sizes of heat - affected zone; to predict sired properties and quality of welded joints.
