Optimizing Deep Learning for Computer-Aided Diagnosis of Lung Diseases: An Automated Method Combining Evolutionary Algorithm, Transfer Learning, and Model Compression

Recent developments in Computer Vision have presented novel opportunities to tackle complex healthcare issues,particularly in the field of lung disease diagnosis.One promising avenue involves the use of chest X-Rays,which are commonly utilized in radiology.To fully exploit their potential,researchers have suggested utilizing deep learning methods to construct computer-aided diagnostic systems.However,constructing and compressing these systems presents a significant challenge,as it relies heavily on the expertise of data scientists.To tackle this issue,we propose an automated approach that utilizes an evolutionary algorithm(EA)to optimize the design and compression of a convolutional neural network(CNN)for X-Ray image classification.Our approach accurately classifies radiography images and detects potential chest abnormalities and infections,including COVID-19.Furthermore,our approach incorporates transfer learning,where a pre-trainedCNNmodel on a vast dataset of chest X-Ray images is fine-tuned for the specific task of detecting COVID-19.This method can help reduce the amount of labeled data required for the task and enhance the overall performance of the model.We have validated our method via a series of experiments against state-of-the-art architectures.

Computer-Aided Diagnosis for Tuberculosis Classification with Water Strider Optimization Algorithm

Computer-aided diagnosis(CAD)models exploit artificial intelligence(AI)for chest X-ray(CXR)examination to identify the presence of tuberculosis(TB)and can improve the feasibility and performance of CXR for TB screening and triage.At the same time,CXR interpretation is a time-consuming and subjective process.Furthermore,high resemblance among the radiological patterns of TB and other lung diseases can result in misdiagnosis.Therefore,computer-aided diagnosis(CAD)models using machine learning(ML)and deep learning(DL)can be designed for screening TB accurately.With this motivation,this article develops a Water Strider Optimization with Deep Transfer Learning Enabled Tuberculosis Classification(WSODTL-TBC)model on Chest X-rays(CXR).The presented WSODTL-TBC model aims to detect and classify TB on CXR images.Primarily,the WSODTL-TBC model undergoes image filtering techniques to discard the noise content and U-Net-based image segmentation.Besides,a pre-trained residual network with a two-dimensional convolutional neural network(2D-CNN)model is applied to extract feature vectors.In addition,the WSO algorithm with long short-term memory(LSTM)model was employed for identifying and classifying TB,where the WSO algorithm is applied as a hyperparameter optimizer of the LSTM methodology,showing the novelty of the work.The performance validation of the presented WSODTL-TBC model is carried out on the benchmark dataset,and the outcomes were investigated in many aspects.The experimental development pointed out the betterment of the WSODTL-TBC model over existing algorithms.

Computer-Aided Diagnosis Model Using Machine Learning for Brain Tumor Detection and Classification

The Brain Tumor(BT)is created by an uncontrollable rise of anomalous cells in brain tissue,and it consists of 2 types of cancers they are malignant and benign tumors.The benevolent BT does not affect the neighbouring healthy and normal tissue;however,the malignant could affect the adjacent brain tissues,which results in death.Initial recognition of BT is highly significant to protecting the patient’s life.Generally,the BT can be identified through the magnetic resonance imaging(MRI)scanning technique.But the radiotherapists are not offering effective tumor segmentation in MRI images because of the position and unequal shape of the tumor in the brain.Recently,ML has prevailed against standard image processing techniques.Several studies denote the superiority of machine learning(ML)techniques over standard techniques.Therefore,this study develops novel brain tumor detection and classification model using met heuristic optimization with machine learning(BTDC-MOML)model.To accomplish the detection of brain tumor effectively,a Computer-Aided Design(CAD)model using Machine Learning(ML)technique is proposed in this research manuscript.Initially,the input image pre-processing is performed using Gaborfiltering(GF)based noise removal,contrast enhancement,and skull stripping.Next,mayfly optimization with the Kapur’s thresholding based segmentation process takes place.For feature extraction proposes,local diagonal extreme patterns(LDEP)are exploited.At last,the Extreme Gradient Boosting(XGBoost)model can be used for the BT classification process.The accuracy analysis is performed in terms of Learning accuracy,and the validation accuracy is performed to determine the efficiency of the proposed research work.The experimental validation of the proposed model demonstrates its promising performance over other existing methods.

Novel Computer-Aided Diagnosis System for the Early Detection of Alzheimer’s Disease

Aging is a natural process that leads to debility,disease,and dependency.Alzheimer’s disease(AD)causes degeneration of the brain cells leading to cognitive decline and memory loss,as well as dependence on others to fulfill basic daily needs.AD is the major cause of dementia.Computer-aided diagnosis(CADx)tools aid medical practitioners in accurately identifying diseases such as AD in patients.This study aimed to develop a CADx tool for the early detection of AD using the Intelligent Water Drop(IWD)algorithm and the Random Forest(RF)classifier.The IWD algorithm an efficient feature selection method,was used to identify the most deterministic features of AD in the dataset.RF is an ensemble method that leverages multiple weak learners to classify a patient’s disease as either demented(DN)or cognitively normal(CN).The proposed tool also classifies patients as mild cognitive impairment(MCI)or CN.The dataset on which the performance of the proposed CADx was evaluated was sourced from the Alzheimer’s Disease Neuroimaging Initiative(ADNI).The RF ensemble method achieves 100%accuracy in identifying DN patients from CN patients.The classification accuracy for classifying patients as MCI or CN is 92%.This study emphasizes the significance of pre-processing prior to classification to improve the classification results of the proposed CADx tool.

Pre-Trained Deep Neural Network-Based Computer-Aided Breast Tumor Diagnosis Using ROI Structures

Deep neural network(DNN)based computer-aided breast tumor diagnosis(CABTD)method plays a vital role in the early detection and diagnosis of breast tumors.However,a Brightness mode(B-mode)ultrasound image derives training feature samples that make closer isolation toward the infection part.Hence,it is expensive due to a metaheuristic search of features occupying the global region of interest(ROI)structures of input images.Thus,it may lead to the high computational complexity of the pre-trained DNN-based CABTD method.This paper proposes a novel ensemble pretrained DNN-based CABTD method using global-and local-ROI-structures of B-mode ultrasound images.It conveys the additional consideration of a local-ROI-structures for further enhan-cing the pretrained DNN-based CABTD method’s breast tumor diagnostic performance without degrading its visual quality.The features are extracted at various depths(18,50,and 101)from the global and local ROI structures and feed to support vector machine for better classification.From the experimental results,it has been observed that the combined local and global ROI structure of small depth residual network ResNet18(0.8 in%)has produced significant improve-ment in pixel ratio as compared to ResNet50(0.5 in%)and ResNet101(0.3 in%),respectively.Subsequently,the pretrained DNN-based CABTD methods have been tested by influencing local and global ROI structures to diagnose two specific breast tumors(Benign and Malignant)and improve the diagnostic accuracy(86%)compared to Dense Net,Alex Net,VGG Net,and Google Net.Moreover,it reduces the computational complexity due to the small depth residual network ResNet18,respectively.

Framework for a Computer-Aided Treatment Prediction (CATP) System for Breast Cancer

This study offers a framework for a breast cancer computer-aided treat-ment prediction(CATP)system.The rising death rate among women due to breast cancer is a worldwide health concern that can only be addressed by early diagno-sis and frequent screening.Mammography has been the most utilized breast ima-ging technique to date.Radiologists have begun to use computer-aided detection and diagnosis(CAD)systems to improve the accuracy of breast cancer diagnosis by minimizing human errors.Despite the progress of artificial intelligence(AI)in the medical field,this study indicates that systems that can anticipate a treatment plan once a patient has been diagnosed with cancer are few and not widely used.Having such a system will assist clinicians in determining the optimal treatment plan and avoid exposing a patient to unnecessary hazardous treatment that wastes a significant amount of money.To develop the prediction model,data from 336,525 patients from the SEER dataset were split into training(80%),and testing(20%)sets.Decision Trees,Random Forest,XGBoost,and CatBoost are utilized with feature importance to build the treatment prediction model.The best overall Area Under the Curve(AUC)achieved was 0.91 using Random Forest on the SEER dataset.

Advancing orthopaedic trauma care through WhatsApp:An analysis of clinical and non-clinical applications,challenges,and future directions

The integration of WhatsApp,a widely-used instant messaging application(IMA),into the realm of orthopaedics and trauma surgery has emerged as a significant development in recent years.This paper explores the multifaceted role of WhatsApp in orthopaedics,focusing on its clinical and non-clinical applications,advantages,disadvantages,and future prospects.The study synthesizes findings from various research papers,emphasizing the growing reliance on mobile technology in healthcare.WhatsApp’s role in orthopaedics is notable for its ease of use,real-time communication,and accessibility.Clinically,it facilitates triage,teleconsultation,diagnosis,treatment,patient advice,and post-operative monitoring.Non-clinically,it supports telemedicine,teleradiology,virtual frac-ture clinics,research,and education in orthopaedic surgery.The application has proven beneficial in enhancing communication among healthcare teams,providing quick responses,and motivating junior physicians.Its use in educational settings has been shown to improve learner’s understanding and patient care.However,the use of WhatsApp in orthopaedics is not without challenges.Risks include the potential spread of misleading information,privacy concerns,and issues with image quality affecting diagnosis and treatment decisions.The paper acknowledges the importance of maintaining professional boundaries and the need for oversight measures to ensure content accuracy.Looking forward,the potential of WhatsApp and similar IMAs in orthopaedics lies in their ability to streamline data collection and retrieval,improve doctor-patient communication,and address challenges like bureaucratic red tape and limited resources.The paper suggests that future orthopaedic practice,particularly in emergency departments,will increasingly rely on such technologies for efficient patient management.This shift,however,must be approached with an understanding of the ethical,legal,and practical implications of integrating social media and mobile technology in healthcare.

Computer-Aided Translation Technology and Translation Teaching

With the development of computer technology, Computer-Aided Translation(CAT) is widely used in the translation process, thus increasing the efficiency of the entire translation work. The purpose of this article is to analyze the importance of introducing CAT technology into translation teaching and explore some ways of integrating CAT technology with translation teaching, so as to improve the quality of the translators and the translation work.

Computer-aided Translation Technology and Its Applications

This article begins with a brief analysis of the significance of translation technology in different spheres of modern life,followed by a distinction between machine translation(MT)and computer-aided translation(CAT).It then describes some translation resources and tools and examines the negative and positive aspects of computer-aided translations.Finally it comes to a conclusion that it would be greatly efficient and productive for the translators to acquire the new skills in the translation workplace.

Damage control orthopaedics: State of the art

Damage control orthopaedics(DCO) originally consisted of the provisional immobilisation of long bone-mainly femur-fractures in order to achieve the advantages of early treatment and to minimise the risk of complications, such as major pain, fat embolism, clotting, pathological inflammatory response, severe haemorrhage triggering the lethal triad, and the traumatic effects of major surgery on a patient who is already traumatised(the "second hit" effect). In recent years, new locations have been added to the DCO concept, such as injuries to the pelvis, spine and upper limbs. Nonetheless, this concept has not yet been validated in well-designed prospective studies, and much controversy remains.Indeed, some researchers believe the indiscriminate application of DCO might be harmful and produce substantial and unnecessary expense. In this respect, too,normalised parameters associated with the acid-base system have been proposed,under a concept termed early appropriate care, in the view that this would enable patients to receive major surgical procedures in an approach offering the advantages of early total care together with the apparent safety of DCO. This paper discusses the diagnosis and treatment of severely traumatised patients managed in accordance with DCO and highlights the possible drawbacks of this treatment principle.

Using shapes correlation for active contour segmentation of uterine fibroid ultrasound images in computer-aided therapy

Segmenting the lesion regions from the ultrasound （US） images is an important step in the intra-operative planning of some computer-aided therapies. High-Intensity Focused Ultrasound （HIFU）, as a popular computer-aided therapy, has been widely used in the treatment of uterine fibroids. However, such segmentation in HIFU remains challenge for two reasons： （1） the blurry or missing boundaries of lesion regions in the HIFU images and （2） the deformation of uterine fibroids caused by the patient＇s breathing or an external force during the US imaging process, which can lead to complex shapes of lesion regions. These factors have prevented classical active contour-based segmentation methods from yielding desired results for uterine fibroids in US images. In this paper, a novel active contour-based segmentation method is proposed, which utilizes the correlation information of target shapes among a sequence of images as prior knowledge to aid the existing active contour method. This prior knowledge can be interpreted as a unsupervised clustering of shapes prior modeling. Meanwhile, it is also proved that the shapes correlation has the low-rank property in a linear space, and the theory of matrix recovery is used as an effective tool to impose the proposed prior on an existing active contour model. Finally, an accurate method is developed to solve the proposed model by using the Augmented Lagrange Multiplier （ALM）. Experimental results from both synthetic and clinical uterine fibroids US image sequences demonstrate that the proposed method can consistently improve the performance of active contour models and increase the robustness against missing or misleading boundaries, and can greatly improve the efficiency of HIFU therapy.

Application of computer-aided engineering optimum design method in aluminum profile extrusion mould

The finite element analysis and the optimum design of aluminum profile extrusion mould were investigated using the ANSYS software and its parameterized modeling method. The optimum dimensions of the mould were obtained. It is found that the stress distribution is very uneven, and the stress convergence is rather severe in the bridge of the aluminum profile extrusion mould. The optimum height of the mould is 70.527 mm, and the optimum radius of dividing holes are 70.182 mm and 80.663 mm. Increasing the height of the mould in the range of 61.282 mm to 70.422 mm can prolong its longevity, but when the height is over 70.422 mm, its longevity reduces.

Enhanced characterization of solid solitary pulmonary nodules with Bayesian analysis-based computer-aided diagnosis

The aim of this study was to prospectively assess the accuracy gain of Bayesian analysis-based computeraided diagnosis(CAD) vs human judgment alone in characterizing solitary pulmonary nodules(SPNs) at computed tomography(CT). The study included 100 randomly selected SPNs with a definitive diagnosis. Nodule features at first and follow-up CT scans as well as clinical data were evaluated individually on a 1 to 5 points risk chart by 7 radiologists, firstly blinded then aware of Bayesian Inference Malignancy Calculator(BIMC) model predictions. Raters' predictions were evaluated by means of receiver operating characteristic(ROC) curve analysis and decision analysis. Overall ROC area under the curve was 0.758 before and 0.803 after the disclosure of CAD predictions(P = 0.003). A net gain in diagnostic accuracy was found in 6 out of 7 readers. Mean risk class of benign nodules dropped from 2.48 to 2.29, while mean risk class of malignancies rose from 3.66 to 3.92. Awareness of CAD predictions also determined a significant drop on mean indeterminate SPNs(15 vs 23.86 SPNs) and raised the mean number of correct and confident diagnoses(mean 39.57 vs 25.71 SPNs). This study provides evidence supporting the integration of the Bayesian analysis-based BIMC model in SPN characterization.

Computer-aided texture analysis combined with experts' knowledge: Improving endoscopic celiac disease diagnosis

AIM: To further improve the endoscopic detection of intestinal mucosa alterations due to celiac disease(CD).METHODS: We assessed a hybrid approach based on the integration of expert knowledge into the computerbased classification pipeline. A total of 2835 endoscopic images from the duodenum were recorded in 290 children using the modified immersion technique(MIT). These children underwent routine upper endoscopy for suspected CD or non-celiac upper abdominal symptoms between August 2008 and December 2014. Blinded to the clinical data and biopsy results, three medical experts visually classified each image as normal mucosa(Marsh-0) or villous atrophy(Marsh-3). The experts' decisions were further integrated into state-of-the-arttexture recognition systems. Using the biopsy results as the reference standard, the classification accuracies of this hybrid approach were compared to the experts' diagnoses in 27 different settings.RESULTS: Compared to the experts' diagnoses, in 24 of 27 classification settings(consisting of three imaging modalities, three endoscopists and three classification approaches), the best overall classification accuracies were obtained with the new hybrid approach. In 17 of 24 classification settings, the improvements achieved with the hybrid approach were statistically significant(P < 0.05). Using the hybrid approach classification accuracies between 94% and 100% were obtained. Whereas the improvements are only moderate in the case of the most experienced expert, the results of the less experienced expert could be improved significantly in 17 out of 18 classification settings. Furthermore, the lowest classification accuracy, based on the combination of one database and one specific expert, could be improved from 80% to 95%(P < 0.001).CONCLUSION: The overall classification performance of medical experts, especially less experienced experts, can be boosted significantly by integrating expert knowledge into computer-aided diagnosis systems.

Breast Tumor Computer-Aided Detection System Based on Magnetic Resonance Imaging Using Convolutional Neural Network

Background:The main cause of breast cancer is the deterioration of malignant tumor cells in breast tissue.Early diagnosis of tumors has become the most effective way to prevent breast cancer.Method:For distinguishing between tumor and non-tumor in MRI,a new type of computer-aided detection CAD system for breast tumors is designed in this paper.The CAD system was constructed using three networks,namely,the VGG16,Inception V3,and ResNet50.Then,the influence of the convolutional neural network second migration on the experimental results was further explored in the VGG16 system.Result:CAD system built based on VGG16,Inception V3,and ResNet50 has higher performance than mainstream CAD systems.Among them,the system built based on VGG16 and ResNet50 has outstanding performance.We further explore the impact of the secondary migration on the experimental results in the VGG16 system,and these results show that the migration can improve system performance of the proposed framework.Conclusion:The accuracy of CNN represented by VGG16 is as high as 91.25%,which is more accurate than traditional machine learningmodels.The F1 score of the three basic networks that join the secondary migration is close to 1.0,and the performance of the VGG16-based breast tumor CAD system is higher than Inception V3,and ResNet50.

Computer-aided designing and manufacturing of advanced steels

Suitable optimization and simulation were performed using a powerful software package with a mature database as well as modem measurement facilities, which led to the successful designing and manufacturing of advanced steels. In the course of designing, the composition of a large section of prehardened mold steel for plastics was estimated so as to lower the quantities of oxide inclusions to change the type of carbides and to raise the machinability. The composition and process were adjusted to obtain satisfactory surface quality for the prevailing galvanization in transformation-induced plasticity （TRIP） steel. The refuting process of low-carbon steel was simulated in the light of both Thermo-Calc and Factsage. Thermodynamic and kinetic analyses were always conducted during the test and the procedure.

Computer-Aided Design of Some Advanced Steels and Cemented Carbides

Thermodynamic and kinetic study on TRIP （transformation induced plasticity） steels, cemented carbides and mold steel for plastics were carried out in order to design modern advanced materials. With the sublattice model, equilibrium compositions of ferrite and austenite phases in TRIP steels, as well as volume fraction of austenite at inter-critical temperatures for different time were calculated. Concentration profiles of carbon, manganese, aluminum and silicon in the steels were also estimated in the lattice fixed frame of reference. The effect of Si and Mn on TRIP was discussed according to thermodynamic and kinetic analyses. In order to understand and produce the graded nanophase structure of cemented carbides, miscellaneous phases in the M-Co-C （M= Ti, Ta, Nh） systems and Co-V-C system were modeled. Solution parameters and thermodynamic： properties were listed in detail. The improvement of machining behavior of prehardened mould steel for plastics was obtained by computer-aided composition design. The results showed that the matrix composition of large-section prehardened mould steel for plastic markedly influences the precipitation of non-metallic inclusion and the composition control by the aid of Thermo-Calc software package minimizes the amount of detrimental oxide inclusion. In addition, the modification of calcium was optimized in composition design.

3D printed nerve guidance channels: computer-aided control of geometry, physical cues, biological supplements and gradients

Nerve guidance channels for peripheral nerve injury： Over the past decade, nerve guidance channels （NGCs） have emerged as a promising technology for regenerating gap injuries in peripheral nerves. Nerve gap injuries resulting from neurodegeneration and trauma, such as car accidents and battlefield wounds, affect hun- dreds of thousands of people annually. Motivated by suboptimal results obtained with the current gold standard of autologous grafting （i.e., autografts）, various commercially available NGCs composed of synthetic and biomaterials are now alternatively available （Jia et al., 2014; Jones et al., 2016）.

Computer-aided diagnosis for contrast-enhanced ultrasound in the liver

Computer-aided diagnosis(CAD) has become one of the major research subjects in medical imaging and diagnostic radiology.The basic concept of CAD is to provide computer output as a second opinion to assist radiologists' image interpretations by improving the accuracy and consistency of radiologic diagnosis and also by reducing the image-reading time.To date,research on CAD in ultrasound(US)-based diagnosis has been carried out mostly for breast lesions and has been limited in the fields of gastroenterology and hepatology,with most studies being conducted using B-mode US images.Two CAD schemes with contrast-enhanced US(CEUS) that are used in classifying focal liver lesions(FLLs) as liver metastasis,hemangioma,or three histologically differentiated types of hepatocellular carcinoma(HCC) are introduced in this article:one is based on physicians' subjective pattern classifications(subjective analysis) and the other is a computerized scheme for classification of FLLs(quantitative analysis).Classification accuracies for FLLs for each CAD scheme were 84.8% and 88.5% for metastasis,93.3% and 93.8% for hemangioma,and 98.6% and 86.9% for all HCCs,respectively.In addition,the classification accuracies for histologic differentiation of HCCs were 65.2% and 79.2% for well-differentiated HCCs,41.7% and 50.0% for moderately differentiated HCCs,and 80.0% and 77.8% for poorly differentiated HCCs,respectively.There are a number of issues concerning the clinical application of CAD for CEUS,however,it is likely that CAD for CEUS of the liver will make great progress in the future.

A Computer-aided Design System for Framed-mould in Autoclave Processing

The general computer-aided design （CAD） software cannot meet the mould design requirement of the autoclave process for composites, because many parameters such as temperature and pressure should be considered in the mould design process, in addition to the material and geometry of the part. A framed-mould computer-aided design system （FMCAD） used in the autoclave moulding process is proposed in this paper. A function model of the software is presented, in which influence factors such as part structure, mould structure, and process parameters are considered; a design model of the software is established using object oriented （O-O） technology to integrate the stiffness calculation, temperature field calculation, and deformation field calculation of mould in the design, and in the design model, a hybrid model of mould based on calculation feature and form feature is presented to support those calculations. A prototype system is developed, in which a mould design process wizard is built to integrate the input information, calculation, analysis, data storage, display, and design results of mould design. Finally, three design examples are used to verify the prototype.