A comprehensive review of dwell time optimization methods in computer-controlled optical surfacing

Dwell time plays a vital role in determining the accuracy and convergence of the computer-controlled optical surfacing process.However,optimizing dwell time presents a challenge due to its ill-posed nature,resulting in non-unique solutions.To address this issue,several well-known methods have emerged,including the iterative,Bayesian,Fourier transform,and matrix-form methods.Despite their independent development,these methods share common objectives,such as minimizing residual errors,ensuring dwell time's positivity and smoothness,minimizing total processing time,and enabling flexible dwell positions.This paper aims to comprehensively review the existing dwell time optimization methods,explore their interrelationships,provide insights for their effective implementations,evaluate their performances,and ultimately propose a unified dwell time optimization methodology.

Frequency-domain analysis of computer-controlled optical surfacing processes

Mid-high spatial frequency errors are often induced on optical surfaces polished by computer-controlled optical surfacing (CCOS) processes. In order to efficiently remove these errors, which would degrade the performances of optical systems, the ability of a CCOS process to correct the errors have been investigated based on the convolution integral model in view of the availability of material removal. To quantify the ability, some conceptions, such as figure correcting ability and material removal availability (MRA), have been proposed. The research result reveals that the MRA of the CCOS process to correct a single spatial frequency error is determined by its tool removal function (TRF), and it equals the normalized amplitude spectrum of the Fourier transform of its TRF. Finally, three sine surfaces were etched using ion beam figuring (IBF), which is a typical CCOS process. The experimental results have verified the theoretical analysis. The employed method and the conclusions of this work provide a useful mathematical basis to analyze and optimize CCOS processes.

Optical Surface Monitoring系统跟踪运动靶区的位置精度和剂量精度验证

目的:评估Optical Surface Monitoring System(OSMS)测量靶区运动的几何精度和使用OSMS跟踪运动靶区放疗时的剂量精度。方法:①分别使用OSMS与锥形束CT监测腹部模体的位置,通过移动治疗床使模体产生位移和旋转,对比二者对模体位置的测量结果;②用呼吸运动平台搭载MatriXX二维电离室阵列,测量不同跟踪阈值时模体内相对剂量,分别与计划剂量分布对比,分析不同跟踪阈值时计划验证的gamma通过率。结果:OSMS和锥形束CT系统对模体平移和旋转预设偏移的测量结果差异很小,使用OSMS门控技术时OSMS的阈值越小gamma通过率越高,相对剂量分布与计划剂量的一致性也越好。结论:OSMS系统对模体表面位置监测精度高,可以应用到实际放射治疗的辅助摆位。使用OSMS门控技术跟踪运动靶区可以提高靶区的剂量精度,而且对患者不附加任何电离辐射,适合应用于分次间的辅助摆位和分次内的靶区跟踪。

Dual-channel fiber-optic surface plasmon resonance sensor with cascaded coaxial dual-waveguide D-type structure and microsphere structure

To address the restriction of fiber-optic surface plasmon resonance(SPR) sensors in the field of multi-sample detection, a novel dual-channel fiber-optic SPR sensor based on the cascade of coaxial dual-waveguide D-type structure and microsphere structure is proposed in this paper. The fiber sidepolishing technique converts the coaxial dual-waveguide fiber into a D-type one, and the evanescent wave in the ring core leaks, generating a D-type sensing region;the fiber optic fused ball push technology converts the coaxial dual waveguides into microspheres, and the stimulated cladding mode evanescent wave leaks, producing the microsphere sensing region. By injecting light into the coaxial dual-waveguide middle core alone, the sensor can realize single-stage sensing in the microsphere sensing area;it can also realize dual-channel sensing in the D-type sensing area and microsphere sensing area by injecting light into the ring core. The refractive index measurement ranges for the two channels are 1.333–1.365 and 1.375–1.405, respectively, with detection sensitivities of 981.56 nm/RIU and 4138 nm/RIU. The sensor combines wavelength division multiplexing and space division multiplexing technologies, presenting a novel research concept for multi-channel fiber SPR sensors.

Fiber optic monitoring of an anti-slide pile in a retrogressive landslide

Anti-slide piles are one of the most important reinforcement structures against landslides,and evalu-ating the working conditions is of great significance for landslide mitigation.The widely adopted analytical methods of pile internal forces include cantilever beam method and elastic foundation beam method.However,due to many assumptions involved in calculation,the analytical models cannot be fully applicable to complex site situations,e.g.landslides with multi-sliding surfaces and pile-soil interface separation as discussed herein.In view of this,the combination of distributed fiber optic sensing(DFOS)and strain-internal force conversion methods was proposed to evaluate the working conditions of an anti-sliding pile in a typical retrogressive landslide in the Three Gorges reservoir area,China.Brillouin optical time domain reflectometry(BOTDR)was utilized to monitor the strain distri-bution along the pile.Next,by analyzing the relative deformation between the pile and its adjacent inclinometer,the pile-soil interface separation was profiled.Finally,the internal forces of the anti-slide pile were derived based on the strain-internal force conversion method.According to the ratio of calculated internal forces to the design values,the working conditions of the anti-slide pile could be evaluated.The results demonstrated that the proposed method could reveal the deformation pattern of the anti-slide pile system,and can quantitatively evaluate its working conditions.

Surface roughness prediction model in ultrasonic vibration assisted grinding of BK7 optical glass

Pre-knowledge of machined surface roughness is the key to improve whole machining efficiency and meanwhile reduce the expenditure in machining optical glass components.In order to predict the surface roughness in ultrasonic vibration assisted grinding of brittle materials,the surface morphologies of grinding wheel were obtained firstly in the present work,the grinding wheel model was developed and the abrasive trajectories in ultrasonic vibration assisted grinding were also investigated,the theoretical model for surface roughness was developed based on the above analysis.The prediction model was developed by using Gaussian processing regression(GPR)due to the influence of brittle fracture on machined surface roughness.In order to validate both the proposed theoretical and GPR models,32sets of experiments of ultrasonic vibration assisted grinding of BK7optical glass were carried out.Experimental results show that the average relative errors of the theoretical model and GPR prediction model are13.11%and8.12%,respectively.The GPR prediction results can match well with the experimental results.

Position-resolved Surface Characterization and Nanofabrication Using an Optical Microscope Combined with a Nanopipette/Quartz Tuning Fork Atomic Force Microscope

In this work, we introduce position-resolved surface characterization and nanofabrication using an optical microscope(OM) combined with a nanopipette-based quartz tuning fork atomic force microscope(nanopipette/QTF-AFM) system. This system is used to accurately determine substrate position and nanoscale phenomena under ambient conditions. Solutions consisting of 5 nm Au nanoparticles, nanowires, and polydimethylsiloxane(PDMS) are deposited onto the substrate through the nano/microaperture of a pulled pipette. Nano/microscale patterning is performed using a nanopipette/QTF-AFM, while position is resolved by monitoring the substrate with a custom OM. With this tool, one can perform surface characterization(force spectroscopy/microscopy) using the quartz tuning fork(QTF) sensor. Nanofabrication is achieved by accurately positioning target materials on the surface, and on-demand delivery and patterning of various solutions for molecular architecture.

The determination of the thickness and the optical dispersion property of gold film using spectroscopy of a surface plasmon in the frequency domain

We propose to use wavelength modulation approach,i.e.,the spectroscopy of a surface plasmon in the frequency domain,to characterize the optical dispersion property of gold film.Using this method,we determine the dispersion relationship of gold film in a wavelength range from 537.12 nm to 905.52 nm,and our results accord well with the reported results by other authors.This method is particularly suited for studying the optical dispersion properties of thin metal films,because a series of dielectric constants over a wide spectral range can be determined simultaneously via only a single scan of the incident angle,thereby avoiding the repeated measurements required when using the angular modulation approach.

Chiral lateral optical force near plasmonic ring induced by Laguerre–Gaussian beam

Owing to the good adjustability and the strong near-field enhancement,surface plasmons are widely used in optical force trap,thus the optical force trap can achieve excellent performance.Here,we use the Laguerre–Gaussian beam and a plasmonic gold ring to separate enantiomers by the chiral optical force.Along with the radial optical force that traps the particles,there is also a chirality-sign-sensitive lateral force arising from the optical spin angular momentum,which is caused by the interaction between optical orbit angular momentum and gold ring structure.By selecting a specific incident wavelength,the strong angular scattering and non-chiral related azimuthal optical force can be suppressed.Thus the chiral related azimuthal optical force can induce an opposite orbital rotation of the trapped particles with chirality of different sign near the gold ring.This work proposes an effective approach for catchingand separating chiral enantiomers.

Polar interface and surface optical vibration spectra in multi-layer wurtzite quantum wires： transfer matrix method

The polar interface optical （IO） and surface optical （SO） phonon modes and the corresponding Froehlich electron phonon-interaction Hamiltonian in a freestanding multi-layer wurtzite cylindrical quantum wire （QWR） are derived and studied by employing the transfer matrix method in the dielectric continuum approximation and Loudon＇s uniaxial crystal model. A numerical calculation of a freestanding wurtzite GaN/AlN QWR is performed. The results reveal that for a relatively large azimuthal quantum number m or wave-number kz in the free z-direction, there exist two branches of IO phonon modes localized at the interface, and only one branch of SO mode localized at the surface in the system. The degenerating behaviours of the IO and SO phonon modes in the wurtzite QWR have also been clearly observed for a small kz or m. The limiting frequency properties of the IO and SO modes for large kz and m have been explained reasonably from the mathematical and physical viewpoints. The calculations of electron-phonon coupling functions show that the high-frequency IO phonon branch and SO mode play a more important role in the electron phonon interaction.

Research on automatic inspection system for defects on precise optical surface based on machine vision

In manufacture of precise optical products, it is important to inspect and classify the potential defects existing on the products’ surfaces after precise machining in order to obtain high quality in both functionality and aesthetics. The existing methods for detecting and classifying defects all are low accuracy or efficiency or high cost in inspection process. In this paper, a new inspection system based on machine vision has been introduced, which uses automatic focusing and image mosaic technologies to rapidly acquire distinct surface image, and employs Case-Based Reasoning(CBR)method in defects classification. A modificatory fuzzy similarity algorithm in CBR has been adopted for more quick and robust need of pattern recognition in practice inspection. Experiments show that the system can inspect surface diameter of 500mm in half an hour with resolving power of 0.8μm diameter according to digs or 0.5μm transverse width according to scratches. The proposed inspection principles and methods not only have meet manufacturing requirements of precise optical products, but also have great potential applications in other fields of precise surface inspection.

3D automatic segmentation method for retinal optical coherence tomography volume data using boundary surface enhancement

With the introduction of spectral-domain optical coherence tomography(SD-OCT),much larger image datasets are routinely acquired compared to what was possible using the previous generation of time-domain OCT.Thus,there is a critical need for the development of three-dimensional(3D)segmentation methods for processing these data.We present here a novel 3D automatic segmentation method for retinal OCT volume data.Brie°y,to segment a boundary surface,two OCT volume datasets are obtained by using a 3D smoothingfilter and a 3D differentialfilter.Their linear combination is then calculated to generate new volume data with an enhanced boundary surface,where pixel intensity,boundary position information,and intensity changes on both sides of the boundary surface are used simultaneously.Next,preliminary discrete boundary points are detected from the A-Scans of the volume data.Finally,surface smoothness constraints and a dynamic threshold are applied to obtain a smoothed boundary surface by correcting a small number of error points.Our method can extract retinal layer boundary surfaces sequentially with a decreasing search region of volume data.We performed automatic segmentation on eight human OCT volume datasets acquired from a commercial Spectralis OCT system,where each volume of datasets contains 97 OCT B-Scan images with a resolution of 496
512(each B-Scan comprising 512 A-Scans containing 496 pixels);experimental results show that this method can accurately segment seven layer boundary surfaces in normal as well as some abnormal eyes.

Investigation on the Effect of Film Thickness on the Surface Morphology, Electrical and Optical Properties of E-Beam Deposited Indium Tin Oxide (ITO) Thin Film

The following article has been retracted due to the fact that the authors practise fraud. The scientific community takes a very strong view on this matter, and the Advances in Materials Physics and Chemistry treats all unethical behavior seriously. This paper published in Vol. 4 No. 10 194-202, 2014 has been removed from this site. ? Title: Investigation on the Effect of Film Thickness on the Surface Morphology, Electrical and Optical Properties of E-Beam Deposited Indium Tin Oxide (ITO) Thin Film ? Authors: Golam Saklayen, Shahinul Islam, Ferdous Rahman, Abu Bakar

Impact of Surface Passivation on the Electronic Structure and Optical Properties of the Si1-xGex Nanowires

The electronic structures and optical properties of the [llO]-oriented Sil-xGex nanowires （NWs） passivated with different functional groups （-H, -F and-OH） are investigated by using first-principles calculations. The results show that surface passivation influences the characteristics of electronic band structures significantly： the band gap widths and types （direct or indirect） of the Si1-xGe, NWs with different terminators show complex and robust variations, and the effective masses of the electrons in the NWs can be modulated dramatically by the terminators. The study of optical absorption shows that the main peaks of the parallel polarization component of Si1-x Gex NWs passivated with the functional groups exhibit prominent changes both in height and position, and are red-shifted with respect to those of corresponding pure Si NWs, indicating the importance of both the terminators and Ge concentrations. Our results demonstrate that the electronic and optical properties of Si1-xGex NWs can be tuned by utilizing selected functional groups as well as particular Ge concentrations for customizing purposes.

A historical overview of nano-optics:From near-field optics to plasmonics

Nano-optics is an emergent research field in physics that appeared in the 1980s,which deals with light–matter optical interactions at the nanometer scale.In early studies of nano-optics,the main concern focus is to obtain higher optical resolution over the diffraction limit.The researches of near-field imaging and spectroscopy based on scanning near-field optical microscopy(SNOM)are developed.The exploration of improving SNOM probe for near-field detection leads to the emergence of surface plasmons.In the sense of resolution and wider application,there has been a significant transition from seeking higher resolution microscopy to plasmonic near-field modulations in the nano-optics community during the nano-optic development.Nowadays,studies of nano-optics prefer the investigation of plasmonics in different material systems.In this article,the history of the development of near-field optics is briefly reviewed.The difficulties of conventional SNOM to achieve higher resolution are discussed.As an alternative solution,surface plasmons have shown the advantages of higher resolution,wider application,and flexible nano-optical modulation for new devices.The typical studies in different periods are introduced and characteristics of nano-optics in each stage are analyzed.In this way,the evolution progress from near-field optics to plasmonics of nano-optics research is presented.The future development of nano-optics is discussed then.

Optical Surface Tilt Measurement with Sub-Second Accuracy

This paper presents a coherent resolved heterodyne interferometer used for recognition of surfaces of optical systems with resort to a short coherence length light source and a position sensitive detection(PSD), and its special features of surface sensitivity, high resolution and short measuring time.

Band structure,Fermi surface,elastic,thermodynamic,and optical properties of AlZr3,AlCu3,and AlCu2Zr:First-principles study

The electronic properties（Fermi surface,band structure,and density of states（DOS）） of Al-based alloys AlM3（M=Zr and Cu） and AlCu2Zr are investigated using the first-principles pseudopotential plane wave method within the generalized gradient approximation（GGA）.The structural parameters and elastic constants are evaluated and compared with other available data.Also,the pressure dependences of mechanical properties of the compounds are studied.The temperature dependence of adiabatic bulk modulus,Debye temperature,specific heat,thermal expansion coefficient,entropy,and internal energy are all obtained for the first time through quasi-harmonic Debye model with phononic effects for T = 0 K-100 K.The parameters of optical properties（dielectric functions,refractive index,extinction coefficient,absorption spectrum,conductivity,energy-loss spectrum,and reflectivity） of the compounds are calculated and discussed for the first time.The reflectivities of the materials are quite high in the IR-visible-UV region up to ~ 15 eV,showing that they promise to be good coating materials to avoid solar heating.Some of the properties are also compared with those of the Al-based Ni3 Al compound.

Difference scattering field properties between periodic defect particles and three-dimensional slightly rough optical surface

Based on the practical situation of nondestructive examination, the calculation model of the composite scattering is established by using a three-dimensional half-space finite difference time domain, and the Monte Carlo method is used to solve the problem of the optical surface with roughness in the proposed scheme. Moreover, the defect particles are observed as periodic particles for a more complex situation. In order to obtain the scattering contribution of defects inside the optical surface, a difference radar cross section is added into the model to analyze the selected calculations on the effects of numbers, separation distances, different depths and different materials of defects. The effects of different incident angles are also discussed. The numerical results are analyzed in detail to demonstrate the best position to find the defects in the optical surface by detecting in steps of a fixed degree for the incident angle.

Microvascular alterations of the ocular surface and retina in connective tissue disease-related interstitial lung disease

AIM:To examine the disparities in macular retinal vascular density between individuals with connective tissue disease-related interstitial lung disease(CTD-ILD)and healthy controls(HCs)by optical coherence tomography angiography(OCTA)and to investigate the changes in microvascular density in abnormal eyes.METHODS:For a retrospective case-control study,a total of 16 patients(32 eyes)diagnosed with CTD-ILD were selected as the ILD group.The 16 healthy volunteers with 32 eyes,matched in terms of age and sex with the patients,were recruited as control group.The macular retina’s superficial retinal layer(SRL)and deep retinal layer(DRL)were examined and scanned using OCTA in each individual eye.The densities of retinal microvascular(MIR),macrovascular(MAR),and total microvascular(TMI)were calculated and compared.Changes in retinal vascular density in the macular region were analyzed using three different segmentation methods:central annuli segmentation method(C1-C6),hemispheric segmentation method[uperior right(SR),superior left(SL),inferior left(IL),and inferior right(IR)],and Early Treatment Diabetic Retinopathy Study(ETDRS)methods[superior(S),inferior(I),left(L),and right(R)].The data were analyzed using Version 9.0 of GraphPad prism and Pearson analysis.RESULTS:The OCTA data demonstrated a statistically significant difference(P<0.05)in macular retinal microvessel density between the two groups.Specifically,in the SRL and DRL analyses,the ILD group exhibited significantly lower surface density of MIR and TMI compared to the HCs group(P<0.05).Furthermore,using the hemispheric segmentation method,the ILD group showed notable reductions in SL,SR,and IL in the superficial retina(P<0.05),as well as marked decreases in SL and IR in the deep retina(P<0.05).Similarly,when employing the ETDRS method,the ILD group displayed substantial drops in superficial retinal S and I(P<0.05),along with notable reductions in deep retinal L,I,and R(P<0.05).In the central annuli segmentation method,the ILD group exhibited a significant decrease in the superficial retinal C2-4 region(P<0.05),whereas the deep retina showed a notable reduction in the C3-5 region(P<0.05).Additionally,there was an observed higher positive likelihood ratio in the superficial SR region and deep MIR.Furthermore,there was a negative correlation between conjunctival vascular density and both deep and superficial retinal TMI(P<0.001).CONCLUSION:Patients with CTD-ILD exhibits a significantly higher conjunctival vascular density compared to the HCs group.Conversely,their fundus retinal microvascular density is significantly lower.Furthermore,CTD-ILD patients display notably lower superficial and deep retinal vascular density in comparison to the HCs group.The inverse correlation between conjunctival vascular density and both superficial and deep retinal TMI suggests that detecting subtle changes in ocular microcirculation could potentially serve as an early diagnostic indicator for connective tissue diseases,thereby enhancing disease management.

Electronic, optical properties, surface energies and work functions of Ag_8SnS_6: First-principles method

Ternary metal chalcogenide semiconductor Ag8 Sn S6, which is an efficient photocatalyst under visible light radiation,is studied by plane-wave pseudopotential density functional theory. After geometry optimization, the electronic and optical properties are studied. A scissor operator value of 0.81 e V is introduced to overcome the underestimation of the calculation band gaps. The contribution of different bands is analyzed by virtue of total and partial density of states. Furthermore, in order to understand the optical properties of Ag8 Sn S6, the dielectric function, absorption coefficient, and refractive index are also performed in the energy range from 0 to 11 e V. The absorption spectrum indicates that Ag8 Sn S6has a good absorbency in visible light area. Surface energies and work functions of（411）,（4 13）,（21 1）, and（112） orientations have been calculated. These results reveal the reason for an outstanding photocatalytic activity of Ag8 Sn S6.