A spectrum-splitting and beam-concentrating （SSBC） diffractive optical element （DOE） for three-junction pho- tovoltaics （PV） system is designed and fabricated by five-circ/e micro-fabrication. The incident solar...A spectrum-splitting and beam-concentrating （SSBC） diffractive optical element （DOE） for three-junction pho- tovoltaics （PV） system is designed and fabricated by five-circ/e micro-fabrication. The incident solar light is efficiently split into three sub-spectrum ranges and strongly concentrated on the focal plane, which can be di- rectly utilized by suitable spectrum-matching solar cells. The system concentration factor reaches 12x. Moreover, the designed wavelengths （450nm, 550nm and 65Onto） are spatially distributed on the focal plane, in good agree- ment with the theoretical results. The average optical effic/ency of all the cells over the three designed wavelengths is 60.07%. The SSBC DOE with a high concentration factor and a high optical efficiency provides a cost-effective approach to achieve higher PV conversion efficieneies.展开更多
Dust accumulation is one of the reasons for the performance degradation of concentrating photovoltaic and thermal(CPV/T) systems due to the deposition of dust particles with different compositions, shapes, sizes, and ...Dust accumulation is one of the reasons for the performance degradation of concentrating photovoltaic and thermal(CPV/T) systems due to the deposition of dust particles with different compositions, shapes, sizes, and masses. In this work, an optical model was developed to investigate the influence of the particle size, diameter, shape, and deposition density on the light concentration efficiency, using the Monte Carlo raytracing(MCRT) method in the Tracepro software. The triangular particles had a larger influence on the light ray deflection and energy flux degradation than the circular and square particles. An average increase in the dust density of 1 g/m^(2) decreased the light concentration efficiency of particles with sizes smaller than 50 μm and 60 μm by 3.31% and 3.26%, respectively. Furthermore, the effect of the incidence angle on the light concentration efficiency was considered at an angle less than 2°.展开更多
The concentrating efficiency of a thermal concentrator can be reflected in the ratio of its interior to exterior temperature gradients,which, however, has an upper limit in existing schemes. Here, we manage to break t...The concentrating efficiency of a thermal concentrator can be reflected in the ratio of its interior to exterior temperature gradients,which, however, has an upper limit in existing schemes. Here, we manage to break this upper limit by considering the couplings of thermal conductivities and improve the concentrating efficiency of thermal concentrators. For this purpose, we first discuss a monolayer scheme with an isotropic thermal conductivity, which can break the upper limit but is still restricted by its geometric configuration. To go further, we explore another degree of freedom by considering the monolayer scheme with an anisotropic thermal conductivity or by adding the second shell with an isotropic thermal conductivity, thereby making the concentrating efficiency completely free from the geometric configuration. Nevertheless, apparent negative thermal conductivities are required, and we resort to external heat sources realizing the same effect without violating the second law of thermodynamics. Finite-element simulations are performed to confirm the theoretical predictions, and experimental suggestions are also provided to improve feasibility. These results may have potential applications for thermal camouflage and provide guidance to other diffusive systems such as static magnetic fields and dc current fields for achieving similar behaviors.展开更多
基金Supported by the National Natural Science Foundation of China under Grant Nos 91233202,91433205 and 51421002the Chinese Academy of Sciences
文摘A spectrum-splitting and beam-concentrating （SSBC） diffractive optical element （DOE） for three-junction pho- tovoltaics （PV） system is designed and fabricated by five-circ/e micro-fabrication. The incident solar light is efficiently split into three sub-spectrum ranges and strongly concentrated on the focal plane, which can be di- rectly utilized by suitable spectrum-matching solar cells. The system concentration factor reaches 12x. Moreover, the designed wavelengths （450nm, 550nm and 65Onto） are spatially distributed on the focal plane, in good agree- ment with the theoretical results. The average optical effic/ency of all the cells over the three designed wavelengths is 60.07%. The SSBC DOE with a high concentration factor and a high optical efficiency provides a cost-effective approach to achieve higher PV conversion efficieneies.
基金supported by the National Natural Science Foundation of China(No.51766012)the Natural Science Foundation of Inner Mongolia(No.2019MS05025)+1 种基金the Inner Mongolia Science and Technology Major Project(No.2019ZD014)the Key Project of the ESI Discipline Development of Wuhan University of Technology(WUT Grant No.2017001)。
文摘Dust accumulation is one of the reasons for the performance degradation of concentrating photovoltaic and thermal(CPV/T) systems due to the deposition of dust particles with different compositions, shapes, sizes, and masses. In this work, an optical model was developed to investigate the influence of the particle size, diameter, shape, and deposition density on the light concentration efficiency, using the Monte Carlo raytracing(MCRT) method in the Tracepro software. The triangular particles had a larger influence on the light ray deflection and energy flux degradation than the circular and square particles. An average increase in the dust density of 1 g/m^(2) decreased the light concentration efficiency of particles with sizes smaller than 50 μm and 60 μm by 3.31% and 3.26%, respectively. Furthermore, the effect of the incidence angle on the light concentration efficiency was considered at an angle less than 2°.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11725521, and 12035004)the Science and Technology Commission of Shanghai Municipality (Grant No. 20JC1414700)。
文摘The concentrating efficiency of a thermal concentrator can be reflected in the ratio of its interior to exterior temperature gradients,which, however, has an upper limit in existing schemes. Here, we manage to break this upper limit by considering the couplings of thermal conductivities and improve the concentrating efficiency of thermal concentrators. For this purpose, we first discuss a monolayer scheme with an isotropic thermal conductivity, which can break the upper limit but is still restricted by its geometric configuration. To go further, we explore another degree of freedom by considering the monolayer scheme with an anisotropic thermal conductivity or by adding the second shell with an isotropic thermal conductivity, thereby making the concentrating efficiency completely free from the geometric configuration. Nevertheless, apparent negative thermal conductivities are required, and we resort to external heat sources realizing the same effect without violating the second law of thermodynamics. Finite-element simulations are performed to confirm the theoretical predictions, and experimental suggestions are also provided to improve feasibility. These results may have potential applications for thermal camouflage and provide guidance to other diffusive systems such as static magnetic fields and dc current fields for achieving similar behaviors.
