Concentration and Temperature Dependence of Electrical Conductivity in Thermally Stable Chromium Polyacrylate

Electrical conductivity of chromium polyacrylate with dopant concentration 30, 40 and 50 wt-% of chromium has been measured over a broad range of temperatures (303 K to 383 K).The electrical conductivity shows dependence on temperature, as well as, level of doping. The conductivity is considered to be due to thermal hopping motion of localized charge carriers,which are believed to be polarons, in the temperature range 303 K to 323 K and for T>343 K,whereas. it is metal-like in the temperature range 323 K to 343 K

Combined effects of temperature and copper ion concentration on the superoxide dismutase activity in Crassostrea ariakensis

Superoxide dismutase（SOD） is a crucial antioxidant enzyme playing the first defense line in antioxidant pathways against reactive oxygen species in various organisms including marine invertebrates. There exist mainly two specific forms, Cu/Zn-SOD（SOD1） and Mn-SOD（SOD2）, in eukaryotes. SODs are known to be concurrently modulated by a variety of environmental stressors. By using central composite experimental design and response surface method, the joint effects of water temperature（18–34°C） and copper ion concentration（0.1–1.5 mg/L） on the total SOD activity in the digestive gland of Crassostrea ariakensis were studied. The results showed that the linear effect of temperature was highly significant（P〈0.01）, the quadratic effect of temperature was significant（P〈0.05）; the linear effect of copper ion concentration was not significant（P〉0.05）, while the quadratic effect of copper ion concentration was highly significant（P〈0.01）; the interactive effect of temperature and copper ion concentration was not significant（P〉0.05）; the effect of temperature was greater than that of copper ion concentration. The model equation of digestive gland SOD enzyme activity towards the two factors of interest was established, with R2 and predictive R2 as high as 0.961 6 and 0.820 7, respectively, suggesting that the goodness-offit to experimental data be very satisfactory, and could be applied to prediction of digestive gland SOD activity in C. ariakensis under the conditions of the experiment. Our results would be conducive to addressing the health of aquatic animals and/or to detecting environmental problems by taking SOD as a potential bioindicator.

Numerical simulation of low-concentration CO_(2) adsorption on fixed bed using finite element analysis

Accurately predicting distributions of concentration and temperature field in fixed-bed column is essential for designing adsorption processes.In this study,a two-dimensional(2D),axisymmetric,nonisothermal,dynamic adsorption model was established by coupling equations of mass,momentum and energy balance,and solved by finite element analysis.The simulation breakthrough curves fit well with the low-concentration CO_(2) adsorption experimental data,indicating the reliability of the established model.The distributions of concentration and temperature field in the column for CO_(2) adsorption and separation from CO_(2)/N_(2) were obtained.The sensitivity analysis of the adsorption conditions shows that the operation parameters such as feed flow rate,feed concentration,pellet size,and column height-to-diameter ratio produce a significant effect on the dynamic adsorption performance.The multi-physics coupled 2D axisymmetric model could provide a theoretical foundation and guidance for designing CO_(2) fixed-bed adsorption and separation processes,which could be extended to other mixed gases as well.

Two-dimensional Modeling of a Salt-gradient Solar Pond with Wall Shading Effect and Thermo-physical Properties Dependent on Temperature and Concentration

In this paper,the behavior of a salt-gradient solar pond with the square cross-section has been studied experimentally and numerically.A small-scale solar pond were designed and built to provide quantitative data.A two-dimensional,transient heat and mass transfer model has been solved numerically by using finite-control-volume method.In this study,all the thermo-physical properties are variable as the function of temperature and salt concentration.Numerical results as obtained for the experimental pond have been satisfactorily compared and validated against measured data.Furthermore,the wall shading effect has been elaborated to improve the agreement between two sets of results.The temperature of the storage zone is predicted well by the model.It also can be observed that the initial concentration profile is preserved with time.The stability of the pond in time has been investigated in order to distinguish the critical zones.Finally,the application of an energy analysis gives an efficiency of about 12%for the pond.

Dielectric Properties and Microwave Heating of Molybdenite Concentrate at 2.45 GHz Frequency

Dielectric properties were measured using cavity perturbation method. The temperature rising behaviors of molybdenite concentrate were investigated in the field of microwave. This process was conducted to show the microwave absorption properties of molybdenite concentrate and the feasibility of microwave roasting molybdenite concentrate to prepare high purity MOO3. The dielectric constant,dielectric loss,and loss tangent increase from 3. 51 to 5. 04,0. 22 to 0. 51 and 0. 065 to 0. 102 respectively. They are proportional to the apparent density of molybdenite concentrate in the range of 0. 9-1. 4 g/cm3. The results show that the molybdenite concentrate has good microwave absorption capacity in the conventional density range. The temperature rising curves show that the apparent heating rate of the molybdenite concentrate increases with the increase in microwave power and decreases with the increase in the sample mass and thickness. The temperature of concentrate sample of 100 g reaches approximately 800 ℃ after 5 min of microwave treatment at 0. 5 kW of power. Our findings show that it is feasible to prepare high-purity MOO3from molybdenite concentrate by microwave roasting.

Winter sea ice albedo variations in the Bohai Sea of China

Sea ice conditions in the Bohai Sea of China are sensitive to large-scale climatic variations. On the basis of CLARA-A1-SAL data, the albedo variations are examined in space and time in the winter（December, January and February） from 1992 to 2008 in the Bohai Sea sea ice region. Time series data of the sea ice concentration（SIC）, the sea ice extent（SIE） and the sea surface temperature（SST） are used to analyze their relationship with the albedo. The sea ice albedo changed in volatility appears along with time, the trend is not obvious and increases very slightly during the study period at a rate of 0.388% per decade over the Bohai Sea sea ice region.The interannual variation is between 9.93% and 14.50%, and the average albedo is 11.79%. The sea ice albedo in years with heavy sea ice coverage, 1999, 2000 and 2005, is significantly higher than that in other years; in years with light sea ice coverage, 1994, 1998, 2001 and 2006, has low values. For the monthly albedo, the increasing trend（at a rate of 0.988% per decade） in December is distinctly higher than that in January and February. The mean albedo in January（12.90%） is also distinctly higher than that in the other two months. The albedo is significantly positively correlated with the SIC and is significantly negatively correlated with the SST（significance level 90%）.

Temperature and Concentration Fields in a Generator Integrated to Single Stage Heat Transformer Using Water/Carrol Mixture

The generator is the starter device of single stage heat transformer(SSHT) and its characteristics have main effects on the overall efficiency of this kind of absorption machines.This article reports a study of the generation of steam and changes in the concentration of the working solution(Water/Carrol mixture) into a plate heat exchanger as a function of its horizontal and vertical position by gravity effect.It is considered the analysis of six experimental tests;two were evaluated in a plate heat exchanger in a horizontal position and four in a vertical position(90 degree inclination).The generation of steam and increased concentration of the working solution are more sensitive to the vertical position of exchanger than in horizontal position.The results of numerical-experimental analysis indicates that a heat exchanger in horizontal position,the steam generation and the change in the concentration of the working solution occurring in the middle of the plate(or at greater distance depending to the thermodynamic conditions) and instantly in vertical position(at the input of the plate).

Time Evolution of the Multicomponent Laser Plasma Parameters

The emission of CulnSe2-based laser ablation plasma has been investigated at a distance of I mm from the target surface. The plasma was formed by radiation of the neodymium laser （5 ×10^8 W.cm^-2; 1,064 nm; 20 ns; 12 Hz）. The temporal dynamics have been obtained for the plasma parameters, such as the population of excited states of atoms, electron temperature and density. Two peaks were observed in the temporal profile of the population of excited states. The temporal dependence of electron temperature was singly peaked. During the time interval of 0-300 ns, the electron temperature varied in the range of 1.6-1.2 eV and the density of electrons varied in the range of 1.3 × 10^16 cm^-3 to 9 × 10^14 cm^-3. It has been established that at the selected conditions of plasma formation saved ratio of copper and indium, which correspond to stoichoimetric target composition.

A novel SOI pressure sensor for high temperature application

The silicon on insulator（SOI） high temperature pressure sensor is a novel pressure sensor with highperformance and high-quality. A structure of a SOI high-temperature pressure sensor is presented in this paper.The key factors including doping concentration and power are analyzed. The process of the sensor is designed with the critical process parameters set appropriately. The test result at room temperature and high temperature shows that nonlinear error below is 0.1%, and hysteresis is less than 0.5%. High temperature measuring results show that the sensor can be used for from room temperature to 350℃ in harsh environments. It offers a reference for the development of high temperature piezoresistive pressure sensors.

Cavitation erosion in bloods

The cavitation in a mechanical heart valve（MHV） is a serious concern. In most of the investigations of the MHV cavitation in vitro, the tap water, the distilled water, or the glycerin are used as the test liquids, instead of the real blood. Therefore, the effects of the liquid properties on the cavitation can not be well revealed. In this paper, the cavitation erosion in the porcine bloods is experimentally investigated as well as in the tap water and the distilled water by means of a vibratory apparatus. The results show that the blood produces a weaker intensity of the cavitation erosion than the tap water or the distilled water. The cavitation erosion decreases with the decrease of the liquid temperature or with the increase of the concentration of the blood, especially with the increase of the liquid viscosity. It is the viscosity that could be a major dominant factor affecting this erosion. The temperature or the concentration of the blood changes the viscosity, and in turns changes the intensity of the cavitation erosion.

The gelation rule of the polyol acetal derivatives in binary solvent mixtures

The gelation properties of polyol acetal derivatives including 2,4-（3,4-dichlorobenzylidene）-D-sorbitol（DCBS）, 1,3：2,4-di（3,4-dichlorobenzylidene）-D-sorbitol（DDCBS） and 1,3：2,5：4,6-tris（3,4-dichlorobenzylidene）-D-mannitol（TDCBM） in 35 single solvents and 39 binary solvent mixtures have been studied. FTIR and XRD results suggest that the self-assembly patterns of the gelator will not change in either the single solvent component or the corresponding solvent mixtures, but the critical gelation concentration（CGC）will be influenced. The results of SEM and rheology showed that the formation of true gels at saturated concentrations. Improving the heating temperature may promote the dissolving of gelators which are even insoluble at the temperature of the solvent boiling point and change the gelation behaviors. FloryHuggins parameter（x） was used to predict the gelation behavior of DCBS in the mixed solvents, and it is shown that the x values for the mixed solvents that can be gelled by DCBS are either greater or smaller than those for the selected good solvents.