The Effect of Core Eccentricity on the Structural Behavior of Concrete Tall Buildings

The main purpose of this paper is to investigate the effect of core eccentricity on the structural behavior of concrete tall buildings.Concrete buildings of 55 floors with plan dimensions 48.0×48.0 m2 were investigated.Three cases of main core locations are studied:centric(A),eccentric by one sixth(B)and one third(C)of building width.The three-dimensional finite element method has been used in conducting structural analysis through ETABS software.Gravity and lateral(wind and seismic)loadings are applied to all building cases.It has been concluded that the core location is the prime parameter governing the structural behavior of tall buildings.Although the first two cases(A,B)have acceptable and similar structural behaviors conforming to code limits,in the third case(C),the building behavior came beyond code limits.The author introduced remedial action by adding two secondary cores in the opposite direction of the main core(C-R)to restore the building behavior to the code limits.The results of this action were satisfactory.

Seismic behavior of concrete filled steel tubular arch structures

Shaking table tests of a 1:10 scale arch model performed to investigate the seismic behavior and resistance of concrete filled steel tubular (CFT) arch structures are described in this paper. The El-Centro record and Shanghai artificial wave were adopted as the input excitation. The entire test process can be divided into three stages depending on the lateral brace configurations, i.e., fully (five) braced, two braces removed, and all braces removed. A total of 46 tests, starting from the elastic state to failure condition, have been conducted. The natural vibration frequencies, responses of acceleration, displacement and strain were measured. From the test results, it is demonstrated that the CFT arch structures are capable of resisting severe ground motions and that CFT arches offer a credible alternative to reinforced concrete arches, especially in regions of high seismic intensity.

Full－range nonlinear analysis of fatigue behaviors of reinforced concrete structures by finite element method

The offshore reinforced concrete structures are always subject to cyclic load, such as wave load.In this paper a new finite element analysis model is developed to analyze the stress and strain state of reinforced concrete structures including offshore concrete structures, subject to any number of the cyclic load. On the basis of the anal ysis of the experimental data,this model simplifies the number of cycles-total cyclic strain curve of concrete as three straight line segments,and it is assumed that the stress-strain curves of different cycles in each segment are the same, thus the elastoplastic analysis is only needed for the first cycle of each segment, and the stress or strain corresponding to any number of cycles can be obtained by superposition of stress or strain obtained by the above e lastoplastic analysis based on the cyclic numbers in each segment.This model spends less computer time,and can obtain the stress and strain states of the structures after any number of cycles.The endochronic-damage and ideal offshore concrete platform subject to cyclic loading are experimented and analyzed by the finite element method based on the model proposed in this paper. The results between the experiment and the finite element analysis are in good agreement,which demonstrates the validity and accuracy of the proposed model.

Advance in Researches on Bond Behavior for Steel-Corroded Concrete Members

The steel corrosion in concrete is widely reported over the last two to three decades. Much effort has been devoted to researching the causes and mechanisms of reinforcement corrosion and to the questions of durability for concrete structures, but relatively little attention has been devoted to the problem of assessing the effect of bond loss due to corrosion on the structural behavior of corroded elements. From the test results on corroded specimens, the mechanism of degradation in bond behavior between corroded bars and concrete, and the effects of bond loss on structural performances are summarized. Results show that corrosion level, cover depth-W-bar diameter ratio, surface condition of re/nforcement, stirrups, etc. can influence the bond behavior of corroded bars. In addition, the deterioration in bond due to corrosion may induce reduction in bearing capacity, degradation of serviceability, and the loss in ductility for steel-corroded concrete members.

The Repairing of Concrete Walls in Structure for Water Treatment in Thermo Power Plant

As a result of longer term exploitation, exposure to severe weather conditions or influence of chemical conditions, concrete walls of concrete structures get damaged internally as well as externally. This study includes a preliminary analysis of chemically treated water in existing concrete structures, and another after the application of the method and using materials for the structures in future. One of the priorities was to examine the existing concrete structures by using nondestructive and destructive methods. After that, based on the results of the analysis, adequate new materials are proposed for the repairs, most commonly new technology polymer carbonated materials, in order to achieve durability of structure elements in using technological processes. Behavior of the repairing structures was tested using the in situ methods, and especially pull-of test, to verify the adhesion force between the old concrete structures and new applied layer. After the repairing, the concrete structures will be monitored to record the behavior under the chemical treated water.

Flexural Bond Behavior of Rebar in Ultra-High Performance Concrete Beams Considering Lap-Splice Length and Cover Depth

This study intends to find out the correlation between the cover depth and the bond characteristics of UHPC through pull-out tests of UHPC specimens with different cover depths and bond tests of rebar using flexural members. In this experimental study, specimens are fabricated with the lap-splice length as test variable in relation with the calculation of the lap-splice length for 180- MPa UHPC. Moreover, specimens are also fabricated with the cover depth as test variable to evaluate the effect of the cover depth on the UHPC flexural members. The load-displacement curves are analyzed for each of these test variables to compute the lap-splice length proposed in the K-UHPC structural design guideline and to evaluate the influence of the cover depth on the flexural members. As a result, the stability of the structural behavior can be significantly enhanced by increasing slightly the cover depth specification of the current UHPC Structure Design Guideline from the maximum value between 1.5 times of rebar diameter and 20 mm to the maximum value between 1.5 times of rebar diameter and 25 mm.

Bond Behavior between Recycled Concrete Containing CDW and Different Types of Steel Bars

The operation of reinforced concrete structures is directly associated with the adhesion between the steel bar and the concrete,which allows the inter­nal forces to be transferred to the reinforcement during the process of load­ing the structural elements.The modification of the concrete composition,with the introduction of recycled aggregate from construction and demoli­tion waste(CDW),affects the steel-concrete interface and can modify the bonding stress,which is also influenced by the type and diameter of the bar used.In this work,the influence of the recycled fine aggregate(RFA)and types of steel bar on the steel-concrete bond was experimentally evaluated using the pullout test.Conventional concrete and recycled concrete,with RFA replacement level of 25%,were produced.Two types of steel rebars(i.e.,plain and deformed)with diameters of 10.0 and 16.0 mm were con­sidered in this paper.The results indicate a reduction in the adhesion stress with the introduction of recycled aggregate,but this trend is influenced by the diameter of the bar used.The use of ribbed bars modifies the stress bon-slip behavior,with an increase in the average bond strength,which is also observed with the reduction of the diameter of the bar.

Mode-I fracture and durability of FRP-concrete bonded interfaces

In this study, a work-of-fracture method using a three-point bend beam （3PBB） specimen, which is commonly used to determine the fracture energy of concrete, was adapted to evaluate the mode-I fracture and durability of fiber-reinforced polymer （FRP） composite-concrete bonded interfaces. Interface fracture properties were evaluated with established data reduction procedures. The proposed test method is primarily for use in evaluating the effects of freeze-thaw （F-T） and wet-dry （W-D） cycles that are the accelerated aging protocols on the mode-I fracture of carbon FRP-concrete bonded interfaces. The results of the mode-I fracture tests of F-T and W-D cycle-conditioned specimens show that both the critical load and fracture energy decrease as the number of cycles increases, and their degradation pattern has a nearly linear relationship with the number of cycles. However, compared with the effect of the F-T cycles, the critical load and fracture energy degrade at a slower rate with W-D cycles, which suggests that F-T cyclic conditioning causes more deterioration of carbon fiber-reinforced polymer （CFRP）-concrete bonded interface. After 50 and 100 conditioning cycles, scaling of concrete was observed in all the specimens subjected to F-T cycles, but not in those subjected to W-D cycles. The examination of interface fracture surfaces along the bonded interfaces with varying numbers of F-T and W-D conditioning cycles shows that （1） cohesive failure of CFRP composites is not observed in all fractured surfaces; （2） for the control specimens that have not been exposed to any conditioning cycles, the majority of interface failure is a result of cohesive fracture of concrete （peeling of concrete from the concrete substrate）, which means that the cracks mostly propagate within the concrete; and （3） as the number of F-T or W-D conditioning cycles increases, adhesive failure along the interface begins to emerge and gradually increases. It is thus concluded that the fracture properties （i.e., the critical load and fracture energy） of the bonded interface are controlled primarily by the concrete cohesive fracture before conditioning and by the adhesive interface fracture after many cycles of F-T or W-D conditioning. As demonstrated in this study, a test method using 3PBB specimens combined with a fictitious crack model and experimental conditioning protocols for durability can be used as an effective qualification method to test new hybrid material interface bonds and to evaluate durability-related effects on the interfaces.

Shear Behavior of Novel Prestressed Concrete Beam Subjected to Monotonic and Cyclic Loading

Prestressed steel ultrahigh-strength reinforced concrete(PSURC) beam is a new type of prestressed concrete beam, which not only has a considerable compressive strength attributed to the ultrahigh strength concrete, but also ensures a certain degree of ductility at failure due to the existence of structural steel. Five of these beams were monotonically tested until shear failure to investigate the static shear performance including the failure pattern, loaddeflection behavior, shear capacity, shear crack width and shear ductility. The experimental results show that these beams have superior shear capacity, crack control ability and shear ductility. To study the shear performance under repeated overloading, seven PSURC beams were loaded in cyclic test simultaneously. The overall shear performance of cycled beams is similar to that of uncycled beams at low load level but different at high load level. The shear capacity and crack control ability of cycled beams at high load level are reduced, whereas the shear ductility is improved. In addition, the influences of variables including the degree of prestress, stirrup ratio and load level on the shear performance of both uncycled and cycled beams were also discussed and compared, respectively.

Numerical Simulation of the Behavior of Cracked Reinforced Concrete Members

Refined non-linear static or dynamic analyses of reinforced concrete structures require the knowledge of the actual force-displacement or bending moment-rotation curves of each structural member, which depend on the crack widths and on the crack pattern, and after all on the slip between concrete and reinforcing steel. For this reason the definition of improved local models taking into account all these local aspects is a fundamental prerequisite for advanced assessment of r.c. structures. A numerical procedure which allows to predict the relative displacement between steel reinforcement and the surrounding concrete in a reinforced concrete element, once assigned the stress in the naked steel bar and the bond-slip law is discussed. The method provides as final outcomes the sequence of crack openings and the individual crack widths, regardless of the particular bond-slip correlation adopted. The proposed procedure is implemented referring to two relevant experimental case studies, demonstrating that it is able to predict satisfactorily actual strain fields and slips along the investigated reinforced concrete elements.

Reliability analysis for anchorage of reinforced concrete beams with longitudinal cracks due to corrosion at anchorage zone

An anchorage reliability analysis approach for simply supported reinforced concrete beams under corrosion attack in the anchorage zone is developed.The first-order second-moment method is employed to analyze the effects of various factors on the anchorage reliability.These factors include both the length and width of cover cracking due to reinforcement corrosion,the cover thickness,the anchorage length,and the stirrup ratio.The results show that the effect of corrosion-induced crack length on the reliability index for anchorage,β0,is negligible when the crack on the concrete surface is just appearing,but with the crack widening,the β0 value is reduced significantly;the considerable changes in β0 result from a variation in cover depth and anchorage length;the effect of changes in the diameter or space of stirrups on the anchorage resistance is very limited,and the variation in β0 is also very low.

Seismic response of concrete gravity dam reinforced with FRP sheets on dam surface

This paper aims at exploring the effects of anti-seismic reinforcement with the fiber-reinforced polymer （FRP） material bonded to the dam surface in dam engineering. Time-history analysis was performed to simulate the seismic failure process of a gravity dam that was assumed to be reinforced at the locations of slope discontinuity at the downstream surface, part of the upstream face, and the dam heel. A damage model considering the influence of concrete heterogeneity was used to model the nonlinearity of concrete. A bond-slip model was applied to the interface between FRP and concrete, and the reinforcement mechanism was analyzed through the bond stress and the stress in FRP. The results of the crack pattern, displacement, and acceleration of the reinforced dam were compared with those of the original one. It is shown that FRP, as a reinforcement material, postpones the occurrence of cracks and slows the crack propagation, and that cracks emanating from the upstream surface and downstream surface are not connected, meaning that the reinforced dam can retain water-impounding function when subjected to the earthquake. Anti-seismic reinforcement with FRP is therefore beneficial to improving the seismic resistant capability of concrete dams.

Crystal Structure and Solution Structural Dynamic Feature of 1,8-Dibenzoyl-2,7-Dimethoxynaphthalene

The crystal structure and the dynamic feature of molecular structure in solution for 1,8-dibenzoyl-2,7-dimethoxynaph-thalene are revealed by X-ray crystallographic analysis and VT-NMR measurements. In crystal, the molecule of the title compound is located on a twofold rotation axis. The two benzoyl groups are situated in an opposite direction. The dihedral angle between the mean planes of the phenyl ring and the naphthalene ring system is 80.25(6). The benzene ring and carbonyl moiety in each benzoyl group are almost coplanar. The molecular packing is stabilized by weak C–H…O hydrogen bonds and aπ-πstacking interaction between the benzene rings [centroid-centroid and interplanar distances of 3.6383(10) and 3.294 , respectively]. In solution, the temperature-dependent rotation behavior of the C–C bond between the benzene ring and the ketonic carbonyl group has been observed by1H VT-NMR measurements. Furthermore, comparison of the C–C bond rotation behavior between the benzene ring and the carbonyl group with 1-ben-zoyl-2,7-dimethoxynaphthalene has clarified that the C–C bond between the ketonic carbonyl group and the naphthalene ring rotates slower than the 1,8-dibenzoylated homologue.

Empirical model of concrete block fragment behavior under explosion loads

Concrete structures undergo integral fragmentation under explosion loads. The fragmentation degree and particle-size distribution of concrete blocks under explosion loads must be considered during mining to ensure safety. In this study, the impulse is calculated based on the relationship between overpressure and time, and the impact energy of the explosion wave is obtained based on blast theory. Subsequently, the Mohr-Coulomb shear strength fracture criterion is introduced to determine the ultimate shear stress of the concrete materials, and an empirical model that can effectively calculate the energy consumption of concrete blocks under explosion loads is established. Furthermore, concrete fragments with different particle sizes under explosion scenarios are quantitatively predicted with the principle of energy conservation. Finally, explosion tests with different top standoff distances are conducted, and the concrete fragments after the explosion tests are recovered, sieved, weighed, and counted to obtain experimental data. The effectiveness of the fragment empirical model is verified by comparing the model calculation results with the experimental data. The proposed model can be used as a reference for civil blasting, protective engineering design, and explosion-damage assessment.

Experimental study on strain and deformation monitoring of reinforced concrete structures using PPP-BOTDA

Pulse-prepump Brillouin optical time domain analysis (PPP-BOTDA) is a novel technique for distributed strain measurements, in which a pre-pump pulse is inputted in front of the measuring pump pulse to stimulate the phonon, so that higher spatial resolution and measurement precision can be obtained. Principle, methodologies and technical parameters of the PPP-BOTDA are presented and the influence of temperature on measurements is discussed. Applications are made in the bond test of steel rebars and the bending test of concrete girders. Test results show that the PPP-BOTDA can provide a precise description on the strain distribution of steel rebar and concrete, exhibiting the ability for crack detection. Moreover, structural deformation can be obtained indirectly by accumulating the distributed strains along the optical fiber, thus the deflection curves of the concrete girder during the loading process are obtained. Suggestions with regards to the application of the PPP-BOTDA in strain measurements and crack monitoring for civil infrastructures are given.

钢筋与混凝土粘结力学性能实验教学设计

该文以增强大学生创新实践能力培养为目标,开展了混凝土结构基本原理课程综合性实验教学研究,设计并实施了钢筋与混凝土的粘结力学性能综合性实验。通过混凝土抗压强度实验、钢筋与混凝土拉拔实验、粘结强度影响因素及钢筋滑移分析等教学内容增强学生对专业知识的理解、掌握及灵活应用,同时提升学生的实践能力及创新能力。实验教学实践表明,该综合性实验教学有效提升了教学效果,学生反馈良好,为高校新工科建设及学生的创新实践能力培养提供了有益参考。

氯盐环境下UHPC-NC界面黏结性能试验研究

氯盐环境作为一种较为常见的化学侵蚀环境,研究其对超高性能混凝土(ultra-high performance concrete,UHPC)和普通混凝土(normal concrete,NC)界面耐久性能的影响对于UHPC加固混凝土结构和UHPC-NC组合结构的工程应用均具有重大的现实意义.基于此,通过在常规环境以及氯盐环境下的推出试验,获得了干湿循环次数(0次、25次、50次)、氯盐浸泡天数(0 d、50 d、100 d)及界面处理方式(钢丝刷刷毛、高压水射流冲毛、表面缓凝处理)对UHPC-NC界面黏结强度、界面黏结刚度及界面黏结滑移曲线的影响.结果表明:在100 d试验周期内,干湿循环及氯盐浸泡作用造成的界面黏结强度损失率不超过20%;氯盐环境作用时长的增加会导致界面黏结刚度的降低;随着界面粗糙度的增加,UHPC-NC试件的界面黏结强度以及界面黏结刚度均会增加;界面粗糙度的提高有助于界面抗氯盐侵蚀能力的提升.受到界面处理方法的影响,UHPC-NC试件经历干湿循环及氯盐浸泡后,荷载滑移曲线呈现2种不同的形式,分别对应光滑界面(钢丝刷刷毛界面)和其他界面(高压水射流冲毛界面和缓凝剂处理界面).各组试件的黏结滑移曲线在荷载到达峰值前趋于一致;荷载到达峰值后,前者存在荷载骤降段及持荷段,后者则随着滑移量的增加荷载不断降低.根据UHPC-NC黏结滑移曲线特征,提出了黏结滑移建议模型.

钢管混凝土键连接框架梁和剪力墙的受剪性能

目的 研究钢管混凝土键连接框架梁和剪力墙的受剪性能,为工程应用提供设计依据。方法 应用有限元分析软件ABAQUS对比钢管混凝土键连接与现浇连接梁墙的结构受剪性能,分析前者受剪机理及不同因素对受剪性能的影响。结果 钢管混凝土键连接梁墙的结构承载力和延性系数较现浇结构分别提高约10%和34%;钢材强度从Q235到Q390,初始刚度增加8.44%;截面高度从100 mm到120 mm,延性系数提高17.73%;截面厚度每增加2 mm,承载力提高约15%;截面长度和混凝土强度等级对承载力、初始刚度和延性系数的影响均小于15%,纵向距离对其受剪性能几乎无影响。结论 采用钢管混凝土键连接梁墙的结构总体受剪性能优于现浇结构;钢材强度和截面厚度分别是影响初始刚度和承载力的主要因素。

装配式轻钢框架-轻钢骨架轻混凝土墙板结构抗震性能

为研究装配式轻钢框架-轻钢骨架轻混凝土墙板结构抗震性能,对1个足尺轻钢框架结构试件和3个足尺轻钢框架-轻钢骨架轻混凝土墙板结构试件进行了低周反复荷载下的抗震性能试验及理论分析,试件变量包括:2种装配构造,即内嵌式装配墙板、外贴式装配墙板;2种轻钢骨架轻混凝土墙板,即框架式轻钢骨架轻混凝土墙板、桁架式轻钢骨架轻混凝土墙板。研究了各试件的破坏特征和损伤演化过程,分析了结构滞回特性、承载力、变形能力、刚度退化、耗能性能和应变。结果表明:装配式轻钢框架-轻钢骨架轻混凝土墙板结构共同工作性能良好,其水平承载力相比轻钢框架提高了204.7%~210.4%,抗侧刚度提高了257.3%~512.5%,结构变形及耗能能力有显著提高;内嵌墙板的自攻钉连接构造以及外贴墙板的螺栓连接构造传力性能可靠,结构具备2道抗震防线的受力特征;基于简化塑性分析模型以及拉压杆软化桁架模型,对试件承载力进行了计算,计算结果与试验符合较好。

隧道支护工字型钢与喷射混凝土粘结滑移性能研究

工字型钢与喷射混凝土的粘结滑移性能对隧道初期支护的协同变形,整体承载能力具有重要影响。该文进行了自然粘结和焊接栓钉两组对照的推出试验,观察试件的破坏特征,获取粘结滑移曲线。在此基础上分析试件的粘结滑移性能,通过函数建立了自然粘结和焊接栓钉试件的粘结滑移本构模型,并提出了特征值的计算公式。试验结果表明:自然粘结试件的破坏模式为纵向劈裂破坏,焊接栓钉试件为拉裂破坏,拉裂缝位置沿栓钉横向排列方向;试件的荷载-裂缝宽度曲线与平均粘结强度-滑移曲线变化规律基本一致,可分为四段:无滑移段、斜线上升段、曲线下降段和水平残余段;在型钢腹板增加栓钉连接件,能有效提高型钢喷射混凝土的特征粘结强度。试验曲线与本构模型曲线对比拟合较高,表明该文提出的本构模型具有较高的精度。研究结果对于隧道工字型钢与喷射混凝土支护结构破坏特征研究及设计提供理论支持。