Statistical Models for Condition Monitoring and State of Health Estimation of Lithium-Ion Batteries for Ships

Battery systems are increasingly being used for powering ocean going ships,and the number of fully electric or hybrid ships relying on battery power for propulsion is growing.To ensure the safety of such ships,it is important to monitor the available energy that can be stored in the batteries,and classification societies typically require the state of health(SOH)to be verified by independent tests.This paper addresses statistical modeling of SOH for maritime lithium-ion batteries based on operational sensor data.Various methods for sensor-based,data-driven degradation monitoring will be presented,and advantages and challenges with the different approaches will be discussed.The different approaches include cumulative degradation models and snapshot models,models that need to be trained and models that need no prior training,and pure data-driven models and physics-informed models.Some of the methods only rely on measured data,such as current,voltage,and temperature,whereas others rely on derived quantities such as state of charge.Models include simple statistical models and more complicated machine learning techniques.Insight from this exploration will be important in establishing a framework for data-driven diagnostics and prognostics of maritime battery systems within the scope of classification societies.

Temporally Preserving Latent Variable Models:Offline and Online Training for Reconstruction and Interpretation of Fault Data for Gearbox Condition Monitoring

Latent variable models can effectively determine the condition of essential rotating machinery without needing labeled data.These models analyze vibration data via an unsupervised learning strategy.Temporal preservation is necessary to obtain an informative latent manifold for the fault diagnosis task.In a temporalpreserving context,two approaches exist to develop a condition-monitoring methodology:offline and online.For latent variable models,the available training modes are not different.While many traditional methods use offline training,online training can dynamically adjust the latent manifold,possibly leading to better fault signature extraction from the vibration data.This study explores online training using temporal-preserving latent variable models.Within online training,there are two main methods:one focuses on reconstructing data and the other on interpreting the data components.Both are considered to evaluate how they diagnose faults over time.Using two experimental datasets,the study confirms that models from both training modes can detect changes in machinery health and identify faults even under varying conditions.Importantly,the complementarity of offline and online models is emphasized,reassuring their versatility in fault diagnostics.Understanding the implications of the training approach and the available model formulations is crucial for further research in latent variable modelbased fault diagnostics.

Appropriateness of Amikacin Dose Prescription, Monitoring and Safety during Hospitalization as an Impact of Clinical Pharmacologist Intervention, in the Israeli Regional Hospital

Background: Use of inappropriate amikacin dose is one of the most important factors in inducing toxicity, prolonged hospitalization as well as in increasing patient’s mortality. Objective: The aims of this study are the analysis of amikacin dose, serum level and the examination of the effectiveness of the clinical pharmacologist (CP) therapeutic drug monitoring (TDM) intervention to guarantee the safety of amikacin use. Methods: This is a one-year retrospective observational chart review study, which evaluates amikacin dose, serum drug level, development of adverse effects in patients on amikacin with or without CP TDM consultation. Results: Amikacin was prescribed for 393 complex patients, with median age 83. Amikacin group (AG) included 140 (32%) courses with CP consultation (AG1) and 292 (68%) courses without CP consultation (AG2). The distribution of most study characteristics in both groups was similar including amikacin dose (9-10 mg/kg/day), renal failure (14%) and mortality (12%). Acceptance for CP consultation was in 46% of amikacin courses and dose changes were done in 63% after CP intervention. Prolonged antibiotic course (4.6 ± 1.5 vs 3.8 ± 1.6 days, p < 0.0001) and the patient’s hemodynamic instability (15% vs 7%, p = 0.01) were more frequent in the AG1 compared to the AG2. There was a strong association between CP consultation and prolonged hospitalization (p = 0.005), while no association between it and amikacin adverse effects, renal failure or mortality. Conclusions: There was no trend to reducing amikacin toxicity, days of hospitaliza tion or mortality in patients with CP consultation. CP TDM intervention was more in the management of complicated clinical situations. However, it is necessary to optimize it.

Genetic Regression Model for Dam Safety Monitoring

Under-fitting problems usually occur in regression models for dam safety monitoring.To overcome the local convergence of the regression, a genetic algorithm (GA) was proposed using a real parameter coding, a ranking selection operator, an arithmetical crossover operator and a uniform mutation operator, and calculated the least-square error of the observed and computed values as its fitness function. The elitist strategy was used to improve the speed of the convergence. After that, the modified genetic algorithm was applied to reassess the coefficients of the regression model and a genetic regression model was set up. As an example, a slotted gravity dam in the Northeast of China was introduced. The computational results show that the genetic regression model can solve the under-fitting problems perfectly.

Technical Analysis of Safety Monitoring and Evaluation of Existing Bridge Structures

Bridge structure safety monitoring and assessment has been a great concern for the government and the public,and bridge structure safety monitoring and assessment technology has also developed rapidly over the years.Its goal is to equip relevant organizations and professionals with a deep understanding of the principles and practical applications of these technologies.By doing so,it seeks to facilitate the effective implementation of safety monitoring and assessment practices in bridge management.Ultimately,the aim is to foster the constructive development of road and bridge construction and operational management at a broader level.

AN INTELLIGENT TOOL CONDITION MONITORING SYSTEM USING FUZZY NEURAL NETWORKS

Reliable on line cutting tool conditioning monitoring is an essential feature of automatic machine tool and flexible manufacturing system (FMS) and computer integrated manufacturing system (CIMS). Recently artificial neural networks (ANNs) are used for this purpose in conjunction with suitable sensory systems. The present work in Norwegian University of Science and Technology (NTNU) uses back propagation neural networks (BP) and fuzzy neural networks (FNN) to process the cutting tool state data measured with force and acoustic emission (AE) sensors, and implements a valuable on line tool condition monitoring system using the ANNs. Different ANN structures are designed and investigated to estimate the tool wear state based on the fusion of acoustic emission and force signals. Finally, four case studies are introduced for the sensing and ANN processing of the tool wear states and the failures of the tool with practical experiment examples. The results indicate that a tool wear identification system can be achieved using the sensors integration with ANNs, and that ANNs provide a very effective method of implementing sensor integration for on line monitoring of tool wear states and abnormalities.

Potential Application of iRap for Road Safety Assessment under Mixed Traffic Condition Case Study: Le Van Viet Street in Ho Chi Minh City

Road transport safety policies have emphasized road infrastructure safety design and engineering as a core function.However,in developing countries like Vietnam,this approach has been slower to adopt,resulting in substandard roads.In-depth studies of accident locations indicate that road environment factors contribute significantly to road accidents in Vietnam and road design features are associated with specific accident types and hazards.Proactive and reactive approaches,such as road safety audit,inspection,assessment,and treatment of hazardous locations,are necessary to ensure that the road and its environment are safe.This paper provides an overview of road safety in Vietnam in general,and Ho Chi Minh in particular,including its factors and characteristics,as well as road infrastructure safety improvements.The iRap tool for road safety inspection and assessment is highlighted as a potential method for systematically analyzing road infrastructure deficiencies and providing targeted countermeasures to improve road safety under mixed traffic conditions.

Structural safety monitoring for Nanjing Yangtze River Bridge

In order to evaluate objectively and accurately the integrity, safety and operating conditions in real time for the Nanjing Yangtze River Bridge, a large structural safety monitoring system was described. The monitoring system is composed of three parts: sensor system, signal sampling and processing system, and safety monitoring and assessment system. Combining theoretical analysis with measured data analysis, main monitoring contents and layout of measuring points were determined. The vibration response monitoring was significantly investigated. The main contents of safety monitoring on vibration response monitoring are vibration of the main body of the Nanjing Yangtze river bridge, collision avoidance of the bridge piers, vibration of girders on high piers for the bridge approach and earthquake. As a field laboratory, the safety monitorying system also provides information to investigate the unknown and indeterminate problems on bridge structures and specific environment around bridges.

Turbopump Condition Monitoring Using Incremental Clustering and One-class Support Vector Machine

Turbopump condition monitoring is a significant approach to ensure the safety of liquid rocket engine （LRE）.Because of lack of fault samples,a monitoring system cannot be trained on all possible condition patterns.Thus it is important to differentiate abnormal or unknown patterns from normal pattern with novelty detection methods.One-class support vector machine （OCSVM） that has been commonly used for novelty detection cannot deal well with large scale samples.In order to model the normal pattern of the turbopump with OCSVM and so as to monitor the condition of the turbopump,a monitoring method that integrates OCSVM with incremental clustering is presented.In this method,the incremental clustering is used for sample reduction by extracting representative vectors from a large training set.The representative vectors are supposed to distribute uniformly in the object region and fulfill the region.And training OCSVM on these representative vectors yields a novelty detector.By applying this method to the analysis of the turbopump＇s historical test data,it shows that the incremental clustering algorithm can extract 91 representative points from more than 36 000 training vectors,and the OCSVM detector trained on these 91 representative points can recognize spikes in vibration signals caused by different abnormal events such as vane shedding,rub-impact and sensor faults.This monitoring method does not need fault samples during training as classical recognition methods.The method resolves the learning problem of large samples and is an alternative method for condition monitoring of the LRE turbopump.

Online Condition Monitoring of Gripper Cylinder in TBM Based on EMD Method

The gripper cylinder that provides braced force for Tunnel Boring Machine （TBM） might fail due to severe vibration when the TBM excavates in the tunnel. Early fault diagnosis of the gripper cylinder is important for the safety and efficiency of the whole tunneling project. In this paper, an online condition monitoring system based on the Empirical Mode Decomposition （EMD） method is estab- lished for fault diagnosis of the gripper cylinder while TBM is working. Firstly, the lumped mass parameter model of the gripper cylinder is established considering the influence of the variable stiffness at the rock interface, the equivalent stiffness of the oil, the seals, and the copper guide sleeve. The dynamic performance of the gripper cylinder is investigated to provide basis for its health condition evaluation. Then, the EMD method is applied to identify the characteristic frequencies of the gripper cylinder for fault diagnosis and a field test is used to verify the accuracy of the EMD method for detection of the characteristic frequencies. Furthermore, the contact stiff- ness at the interface between the barrel and the rod is calculated with Hertz theory and the relationship between the natural frequency and the stiffness varying with the health condition of the cylinder is simulated based on the dynamic model. The simulation shows that the character- istic frequencies decrease with the increasing clearance between the barrel and the rod, thus the defects could be indicated by monitoring the natural frequency. Finally, a health condition management system of the gripper cylin- der based on the vibration signal and the EMD method is established, which could ensure the safety of TBM.

Sparsity-Assisted Intelligent Condition Monitoring Method for Aero-engine Main Shaft Bearing

Weak feature extraction is of great importance for condition monitoring and intelligent diagnosis of aeroengine.Aimed at achieving intelligent diagnosis of aero-engine main shaft bearing,an enhanced sparsity-assisted intelligent condition monitoring method is proposed in this paper.Through analyzing the weakness of convex sparse model,i.e.the tradeoff between noise reduction and feature reconstruction,this paper proposes an enhanced-sparsity nonconvex regularized convex model based on Moreau envelope to achieve weak feature extraction.Accordingly,a sparsity-assisted deep convolutional variational autoencoders network is proposed,which achieves the intelligent identification of fault state through training denoised normal data.Finally,the effectiveness of the proposed method is verified through aero-engine bearing run-to-failure experiment.The comparison results show that the proposed method is good at abnormal pattern recognition,showing a good potential for weak fault intelligent diagnosis of aero-engine main shaft bearings.

Effects ofmodulenumberand firing conditiononchargethermal safetyingunchamber

Thermal safety of modular charge which is fed into and retained in the chamber after gun fires consecutively is first investigated with cook-off method,A two-dimensional cook-off model of modular charge in gun chamber is established and the cook-off process of modular charge in gun chamber is numerically simulated.Then the effects of module number and firing condition on charge thermal safety are evaluated by researching the cook-off response characteristics of modules.The results show that under conditions of different module numbers the cook-off responses all occur on the module closest to the boundary of missile,and the single-base propellants located at the inner surface of cartridge ignite first.When the number of loaded module changes from 1 to 6,the cook-off response temperatures vary little,only in a small range of 478.1 K-482.4 K.The cook-off response times decrease logarithmically in the range of 211.25-166.7 s with the increasing length of residual air gap in gun chamber.The simulation results are well matched with the experimental data.Furthermore,different firing conditions have greatinfluence on the cook-off response time,minor influence on the initial response position and little in-fluence on the response temperature.Under the three conditions of consecutive 32 launches with 5 rounds/min,43 launches with 1 round/min,and 41 launches with different firing frequencies,the cook off response temperatures are 479.2 K,481.1 K and 479.9 K respectively and the response times are 709.25,211.2 s and 214.4 s respectively.The response position is near the middle area of the inner cartridge surface in the former condition and near the right area in the latter two conditions.

Swarm-LSTM: Condition Monitoring of Gearbox Fault Diagnosis Based on Hybrid LSTM Deep Neural Network Optimized by Swarm Intelligence Algorithms

Nowadays,renewable energy has been emerging as the major source of energy and is driven by its aggressive expansion and falling costs.Most of the renewable energy sources involve turbines and their operation and maintenance are vital and a difficult task.Condition monitoring and fault diagnosis have seen remarkable and revolutionary up-gradation in approaches,practices and technology during the last decade.Turbines mostly do use a rotating type of machinery and analysis of those signals has been challenging to localize the defect.This paper proposes a new hybrid model wherein multiple swarm intelligence models have been evaluated to optimize the conventional Long Short-Term Memory(LSTM)model in classifying the faults from the vibration signals data acquired from the gearbox.This helps to analyze the performance and behavioral patterns of the system more effectively and efficiently which helps to suggest for replacement of the unit with higher precision.The results have demonstrated that the proposed hybrid modeling approach is effective in classifying the faults of the gearbox from the time series data and achieve higher diagnostic accuracy in comparison to the conventional LSTM methods.

A system for underground road condition monitoring

Poor road conditions in underground mine tunnels can lead to decreased production efficiency and increased wear on production vehicles. A prototype system for road condition monitoring is presented in this paper to counteract this. The system consists of three components i.e. localization, road monitoring, and scheduling. The localization of vehicles is performed using a Rao-Blackwellized extended particle filter, combining vehicle mounted sensors with signal strengths of Wi Fi access points. Two methods for road monitoring are described: a Kalman filter used together with a model of the vehicle suspension system, and a relative condition measure based on the power spectral density. Lastly, a method for taking automatic action on an ill-conditioned road segment is proposed in the form of a rescheduling algorithm.The scheduling algorithm is based on the large neighborhood search and is used to integrate road service activities in the short-term production schedule while minimizing introduced production disturbances.The system is demonstrated on experimental data collected in a Swedish underground mine.

Multi-dimensional database design and implementation of dam safety monitoring system

To improve the effectiveness of dam safety monitoring database systems, the development process of a multi-dimensional conceptual data model was analyzed and a logic design wasachieved in multi-dimensional database mode. The optimal data model was confirmed by identifying data objects, defining relations and reviewing entities. The conversion of relations among entities to external keys and entities and physical attributes to tables and fields was interpreted completely. On this basis, a multi-dimensional database that reflects the management and analysis of a dam safety monitoring system on monitoring data information has been established, for which factual tables and dimensional tables have been designed. Finally, based on service design and user interface design, the dam safety monitoring system has been developed with Delphi as the development tool. This development project shows that the multi-dimensional database can simplify the development process and minimize hidden dangers in the database structure design. It is superior to other dam safety monitoring system development models and can provide a new research direction for system developers.

Virtual sensing for gearbox condition monitoring based on kernel factor analysis

Vibration and oil debris analysis are widely used in gearbox condition monitoring as the typical indirect and direct sensing techniques. However, they have their own advantages and disadvantages. To better utilize the sensing information and overcome its shortcomings, this paper presents a virtual sensing technique based on artificial intelligence by fusing low-cost online vibration measurements to derive a gearbox condition indictor, and its performance is comparable to the costly offline oil debris measurements. Firstly, the representative features are extracted from the noisy vibration measurements to characterize the gearbox degradation conditions. However, the extracted features of high dimensionality present nonlinearity and uncertainty in the machinery degradation process. A new nonlinear feature selection and fusion method,named kernel factor analysis, is proposed to mitigate the aforementioned challenge. Then the virtual sensing model is constructed by incorporating the fused vibration features and offline oil debris measurements based on support vector regression. The developed virtual sensing technique is experimentally evaluated in spiral bevel gear wear tests,and the results show that the developed kernel factor analysis method outperforms the state-of-the-art featureselection techniques in terms of virtual sensing model accuracy.

The safety parameters monitoring system for the coal mine based on CAN bus communication and intelligent data acquisition

In this paper,a monitoring and controlling system for the safety in production and environmental parameters of a small and medium-sized coal mine has been developed after analyzing the current domestic coal production and security conditions. The client computer can convert the analog signal about the safety in production and environmental parameters detected from the monitoring terminal into digital signal,and then,send the signal to the coal mine safety monitoring centre. This information can be analyzed,judged,and diagnosed by the monitoring-management-controlling software for helping the manager and technical workers to control the actual underground production and security situations. The system has many advantages including high reliability,better performance of real-time monitoring,faster data communicating and good practicability,and it can effectively prevent the occurrence of safety incidents in coal mines.

Bio-inspired computational techniques based on advanced condition monitoring

The application of bio-inspired computational techniques to the field of condition monitoring is addressed. First, the bio-inspired computational techniques are briefly addressed; the advantages and disadvantages of these computational methods are made clear. Then, the roles of condition monitoring in the predictive maintenance and failures prediction and the development trends of condition monitoring are discussed. Finally, a case study on the condition monitoring of grinding machine is described, which shows the application of bio-inspired computational technique to a practical condition monitoring system.

Massive Power Device Condition Monitoring Data Feature Extraction and Clustering Analysis using MapReduce and Graph Model

Effective storage,processing and analyzing of power device condition monitoring data faces enormous challenges.A framework is proposed that can support both MapReduce and Graph for massive monitoring data analysis at the same time based on Aliyun DTplus platform.First,power device condition monitoring data storage based on MaxCompute table and parallel permutation entropy feature extraction based on MaxCompute MapReduce are designed and implemented on DTplus platform.Then,Graph based k-means algorithm is implemented and used for massive condition monitoring data clustering analysis.Finally,performance tests are performed to compare the execution time between serial program and parallel program.Performance is analyzed from CPU cores consumption,memory utilization and parallel granularity.Experimental results show that the designed framework and parallel algorithms can efficiently process massive power device condition monitoring data.

Drilling signals analysis for tricone bit condition monitoring

This paper presents a novel approach to investigate the relations between drilling signals and bit wear condition in real world full-scale mining operations.This research addresses the increasing demand for automation in mining to increase the efficiency,safety,and ability to work in harsh environments.A crucial issue in fully autonomous unmanned drilling is to have a system to detect the bit wear condition through the drilling signals analysis in real time.In this work,based on extensive field studies,a novel qualitative method for tricone bit wear state classification is developed and introduced.The relations between drilling vibration as well as electric motor current signals and bit wear are investigated and bit failure vibration frequencies,regardless of the geological conditions,are introduced.Bit failure frequencies are experimentally investigated and analytically calculated.Finally,the effect of bit design parameters on the failure frequencies is presented for the application of bit wear condition monitoring and bit failure prediction.