The noise that comes from finite element simulation often causes the model to fall into the local optimal solution and over fitting during optimization of generator.Thus,this paper proposes a Gaussian Process Regressi...The noise that comes from finite element simulation often causes the model to fall into the local optimal solution and over fitting during optimization of generator.Thus,this paper proposes a Gaussian Process Regression(GPR)model based on Conditional Likelihood Lower Bound Search(CLLBS)to optimize the design of the generator,which can filter the noise in the data and search for global optimization by combining the Conditional Likelihood Lower Bound Search method.Taking the efficiency optimization of 15 kW Permanent Magnet Synchronous Motor as an example.Firstly,this method uses the elementary effect analysis to choose the sensitive variables,combining the evolutionary algorithm to design the super Latin cube sampling plan;Then the generator-converter system is simulated by establishing a co-simulation platform to obtain data.A Gaussian process regression model combing the method of the conditional likelihood lower bound search is established,which combined the chi-square test to optimize the accuracy of the model globally.Secondly,after the model reaches the accuracy,the Pareto frontier is obtained through the NSGA-II algorithm by considering the maximum output torque as a constraint.Last,the constrained optimization is transformed into an unconstrained optimizing problem by introducing maximum constrained improvement expectation(CEI)optimization method based on the re-interpolation model,which cross-validated the optimization results of the Gaussian process regression model.The above method increase the efficiency of generator by 0.76%and 0.5%respectively;And this method can be used for rapid modeling and multi-objective optimization of generator systems.展开更多
Different pre-heating of boron carbide particles for reinforcement and different processing conditions were studied in this work. Being one of the most cost-effective industrial methods, conventional melt stir-casting...Different pre-heating of boron carbide particles for reinforcement and different processing conditions were studied in this work. Being one of the most cost-effective industrial methods, conventional melt stir-casting route was utilized.Result showed that the boron carbide particles distributed well for a suitable pre-heating temperature and processed in air.No reaction product was found at the A1-B4C interfaces at the resolution limit of SEM used in that way.展开更多
China Fusion Engineering Test Reactor(CFETR)is China's self-designed and ongoing next-generation fusion reactor project.Tritium confinement systems in CFETR guarantee that the radiation level remains below the saf...China Fusion Engineering Test Reactor(CFETR)is China's self-designed and ongoing next-generation fusion reactor project.Tritium confinement systems in CFETR guarantee that the radiation level remains below the safety limit during tritium handling and operation in the fuel cycle system.Our tritium technology team is responsible for studying tritium transport behavior in the CFETR tritium safety confinement systems of the National Key R&D Program of China launched in 2017,and we are conducting CFETR tritium plant safety analysis by using CFD software.In this paper,the tritium migration and removal behavior were studied under a postulated accident condition for the Tokamak Exhaust Processing system of CFETR.The quantitative results of the transport behavior of tritium in the process room and glove box during the whole accident sequence(e.g.,tritium release,alarm,isolation,and tritium removal)have been presented.The results support the detailed design and engineering demonstration-related research of CFETR tritium plant.展开更多
Invertibility is one of the desirable properties of moving average processes. This study derives consequences of the invertibility condition on the parameters of a moving average process of order three. The study also...Invertibility is one of the desirable properties of moving average processes. This study derives consequences of the invertibility condition on the parameters of a moving average process of order three. The study also establishes the intervals for the first three autocorrelation coefficients of the moving average process of order three for the purpose of distinguishing between the process and any other process (linear or nonlinear) with similar autocorrelation structure. For an invertible moving average process of order three, the intervals obtained are , -0.5ρ2ρ1<0.5.展开更多
[Objectives]To explore the extraction conditions of essential oil from eucalyptus leaves.[Methods]The essential oil of eucalyptus leaves was extracted by steam distillation,and the yields of essential oil from eucalyp...[Objectives]To explore the extraction conditions of essential oil from eucalyptus leaves.[Methods]The essential oil of eucalyptus leaves was extracted by steam distillation,and the yields of essential oil from eucalyptus leaves under different extraction times,soaking times and different solid-liquid ratios were analyzed through orthogonal test with three factors and three variables.[Results]The effects of various factors on extraction results were:distillation time>solid-liquid ratio>soaking time.When the extraction time and soaking time were 1.5 and 2 h,and the solid-liquid ratio of eucalyptus leaves to distilled water was 1:10,the yield of essential oil was the highest(0.8%).The yield of essential oil increased with the increase of extraction and soaking time,but when reaching the optimal value,the yield decreased with the extension of time.Increasing the solid-liquid ratio can improve the yield of essential oil,but beyond a certain value the yield increased gradually while the cost performance decreased.[Conclusions]The results will provide some reference for the recovery and utilization of eucalyptus leaves.展开更多
In this study, with the method of vacuum extraction, two evaporative processes of soil water and free water under equilibrium condition were simulated. For each sample,water vapor was condensed by liquid nitrogen and ...In this study, with the method of vacuum extraction, two evaporative processes of soil water and free water under equilibrium condition were simulated. For each sample,water vapor was condensed by liquid nitrogen and was collected in four time intervals. From the analysis of hydrogen and oxygen isotopic compositions of the water collected at different times, it was discovered that the isotope fractionation of soil water also follows the mode, which is just the same as the evaporative process of free water. The relationship between the stable hydrogen and oxygen isotopes in residual water showed that the simulative evaporation line was close to the global meteoric water line (GMWL) under the equilibrium condition at about 20℃. Comparison of the two types of evaporative processes indicated that the isotope fractionation and evaporation velocity of soil water were only slightly modified by the Van der Waals force.展开更多
Through exploring the effects of low pH on the composite system of desulfurization gypsum(DG)enhanced by melamine-formaldehyde resin(MF),it is found that the inducing of sulfate-ion,in contrast to chloride and oxalate...Through exploring the effects of low pH on the composite system of desulfurization gypsum(DG)enhanced by melamine-formaldehyde resin(MF),it is found that the inducing of sulfate-ion,in contrast to chloride and oxalate ions,favors the longitudinal growth of the crystalline form of the hydration product,which was relatively simple and had the highest length to width(L/D)ratio.At the same time,MF can also improve L/D ratio of gypsum hydration products,which favors the formation of hydrated whiskers.Finally,in a composite system composed of hemihydrate gypsum,MF,and glass fibers,when dilute sulfuric acid was used to regulate pH=3-4,the tight binding formed among the components of the composite system compared to pH=5-6.The hydration product of gypsum adheres tightly to glass fiber surface and produces a good cross-linking and binding effect with MF.The flexural strength,compressive strength,elastic modulus,and water absorption of the desulphurized gypsum composite board is 22.7 MPa,39.8 MPa,5608 MPa,and 1.8%,respectively.展开更多
Potassium bismuth titanate nanosized powders were prepared by the hydrothermal method using Ti(C_4H_9O)_4 and Bi(NO_3)_3·5H_2O as raw materials in alkaline solution.The phase composition,particle size and morphol...Potassium bismuth titanate nanosized powders were prepared by the hydrothermal method using Ti(C_4H_9O)_4 and Bi(NO_3)_3·5H_2O as raw materials in alkaline solution.The phase composition,particle size and morphology of the powders were studied by XRD and TEM analysis.The results showed that the powders were well crystallized and dispersed.The crystal phase of the powders was K_(0.5)Bi_(0.5)TiO_3 with the grain size of about 50 nm~100 nm.Hydrothermal temperature and alkaline concentrations had great effects on the phase composition and morphology of the resultant powders.Pure K_(0.5)Bi_(0.5)TiO_3 powders could be synthesized at 170℃~180℃with KOH concentration of 8 mol/L~12 mol/L.展开更多
The multi-hollow three dimensional(3-D)crimp sta-ple were prepared by the non-symmetrical cooling spin-ning technology.The material properties,spinneret shape,drawing conditions,heat-setting conditions and silicon fin...The multi-hollow three dimensional(3-D)crimp sta-ple were prepared by the non-symmetrical cooling spin-ning technology.The material properties,spinneret shape,drawing conditions,heat-setting conditions and silicon finishing conditions that influence the compression elasticity of the staple have been investigated.It is found that the compression elasticity of 3-D crimp PET staple is larger than that of 3-D crimp PP staple.The com-pression elasticity of the 5-hollow staple is much展开更多
On the basis of regressional relationship between nutritional indexes and technological conditions,when confronted with feed quality that contains multiple nutritional indexes,a comprehensive equation of evaluating fe...On the basis of regressional relationship between nutritional indexes and technological conditions,when confronted with feed quality that contains multiple nutritional indexes,a comprehensive equation of evaluating feed quality was developed by using fuzzy mathematical method at first in this study,and then the optimum technological conditions were established by introduction of statistical frequency analysis method pursuant to the comprehensive evaluating equation mentioned above compared with conventional multi-aim nonlinear programming,this method can lead to easy solutions,and also can make adjustment of the importance of nutritional indexes to feed quality according to practical considerations.An example was given of soybean extruding to show how the method worked.展开更多
A big debris flow which was arosed by landslide occurrence at night on July 11, 2003 in Qiongshan Ravine, Danba, Sichuan Province. According to the research, debris flow in Qiongshan Ravine is arosed by the fluidizati...A big debris flow which was arosed by landslide occurrence at night on July 11, 2003 in Qiongshan Ravine, Danba, Sichuan Province. According to the research, debris flow in Qiongshan Ravine is arosed by the fluidization of landslide. It had been rained about 70 days before debris flow occurred. That made the sediments in the gully to near to saturated or saturated in water. Being affect by the steep geography, the sediments occurrence peristalsis to transform, parts of soil bodies start disintegrate. All the sediments become transforming with water inleakaging to sediments, and than foreside slope flow to gully quickly after becoming fluidization. And the sediments come into being the debris flow with the water of the gully joining.展开更多
It is a well known fact that for the hierarchical model of a Poisson random variable Y?whose mean has an Erlang distribution, the unconditional distribution of Y is negative binomial. However, the proofs in the litera...It is a well known fact that for the hierarchical model of a Poisson random variable Y?whose mean has an Erlang distribution, the unconditional distribution of Y is negative binomial. However, the proofs in the literature [1] [2] provide no intuitive understanding as to why this result should be true. It is the purpose of this manuscript to give a new proof of this result which provides such an understanding. The memoryless property of the exponential distribution allows one to conclude that the events in two independent Poisson processes may be regarded as Bernoulli trials, and this fact is used to achieve the research purpose. Another goal of this manuscript is to give another proof of this last fact which does not rely on the memoryless property.展开更多
Business growth and development are similar to a selforganization evolution system. This paper intends to explore the context, drive and process within enterprise self-organization evolution from a conceptual perspect...Business growth and development are similar to a selforganization evolution system. This paper intends to explore the context, drive and process within enterprise self-organization evolution from a conceptual perspective. And an enterprise evolution model can be applied on the basis of ecological logistic equations to approach the elementary process and the growth stage of organization. Moreover,the influence of diverse variable on the evolution of enterprise growth is discussed. At last, the study concludes that new structures and functions can emerge within organizations and enterprises,which contribute to transformation and upgrade during their self-organization evolution.展开更多
A two-dimensional (2D) fluid model is presented to study the behavior of silicon plasma mixed with SiH4 , N2 , and NH3 in a radio-frequency capacitively coupled plasma (CCP) reactor. The plasma–wall interaction ...A two-dimensional (2D) fluid model is presented to study the behavior of silicon plasma mixed with SiH4 , N2 , and NH3 in a radio-frequency capacitively coupled plasma (CCP) reactor. The plasma–wall interaction (including the deposition) is modeled by using surface reaction coefficients. In the present paper we try to identify, by numerical simulations, the effect of variations of the process parameters on the plasma properties. It is found from our simulations that by increasing the gas pressure and the discharge gap, the electron density profile shape changes continuously from an edge-high to a center-high, thus the thin films become more uniform. Moreover, as the N2 /NH3 ratio increases from 6/13 to 10/9, the hydrogen content can be significantly decreased, without decreasing the electron density significantly.展开更多
The magneto-caloric effect of Gd5 Si2Ge2 compounds produced by various techniques is investigated in terms of their magnetization behaviors in the magnetic field from 0 to 2.0 T.The studied materials include arc-melte...The magneto-caloric effect of Gd5 Si2Ge2 compounds produced by various techniques is investigated in terms of their magnetization behaviors in the magnetic field from 0 to 2.0 T.The studied materials include arc-melted, annealed and sintered alloys.The results demonstrate that the Gd5Si2Ge2 alloys obtained under different processing conditions possess distinct magneto-caloric effect due to their various microstructures.Proper annealing treatment can enhance the magneto-caloric effect of the alloy remarkably.While the sintered alloy bears relatively lower value of magnetic entropy change ( △ SM) than arc-melted one.The magnetic entropy change of the annealed Gd5 Si2Ge2 alloy arrives the arrives the maximum value of - △SM = 15.29 J· kg-1· K-1 for magnetic field change under 2.0 T in the present work.展开更多
A new interlacer is used in this paper to investigate the effect of processing conditions on the properties of interlaced yarn. The experimental results show that number of tangles of interlaced yarn changes little wi...A new interlacer is used in this paper to investigate the effect of processing conditions on the properties of interlaced yarn. The experimental results show that number of tangles of interlaced yarn changes little with air pressure from 0.2 MPa to 0.5 MPa, and the number of tangles has a maximum value with yarn speed changing. For two yarn directions of entering and leaving yarn guide of interalcer, the yarn speed for the maximum number of tangles is 400 m/rain and 600 m/rain, respectively. The number of tangles changes with air pressure and yarn speed for two yarn directions is compared.展开更多
Real-time capabilities and computational efficiency are provided by parallel image processing utilizing OpenMP. However, race conditions can affect the accuracy and reliability of the outcomes. This paper highlights t...Real-time capabilities and computational efficiency are provided by parallel image processing utilizing OpenMP. However, race conditions can affect the accuracy and reliability of the outcomes. This paper highlights the importance of addressing race conditions in parallel image processing, specifically focusing on color inverse filtering using OpenMP. We considered three solutions to solve race conditions, each with distinct characteristics: #pragma omp atomic: Protects individual memory operations for fine-grained control. #pragma omp critical: Protects entire code blocks for exclusive access. #pragma omp parallel sections reduction: Employs a reduction clause for safe aggregation of values across threads. Our findings show that the produced images were unaffected by race condition. However, it becomes evident that solving the race conditions in the code makes it significantly faster, especially when it is executed on multiple cores.展开更多
We consider risk minimization problems for Markov decision processes. From a standpoint of making the risk of random reward variable at each time as small as possible, a risk measure is introduced using conditional va...We consider risk minimization problems for Markov decision processes. From a standpoint of making the risk of random reward variable at each time as small as possible, a risk measure is introduced using conditional value-at-risk for random immediate reward variables in Markov decision processes, under whose risk measure criteria the risk-optimal policies are characterized by the optimality equations for the discounted or average case. As an application, the inventory models are considered.展开更多
The exergy losses and thermodynamic efficiency of MSF plant with brine recirculation are discussed bymeans of temperature difference functions proposed by the auther.In a MSF plant,the irreversible losses are found ma...The exergy losses and thermodynamic efficiency of MSF plant with brine recirculation are discussed bymeans of temperature difference functions proposed by the auther.In a MSF plant,the irreversible losses are found mainly in irreversible heat-transfer and flash evaporationprocesses.However,the basic variables are the temperature drop from stage to stage and the temperaturedifferences between flashed vapor and cooling water.In this paper,the flash temperature difference func-tion,the heat transfer temperature difference function and the total temperature difference function are sug-gested.The proposed temperature difference functions of MSF plant provide a convenient tool to analyse theirreversible behavior and evaluate the exergetic efficiency of this system,because without such improvement thecalculation of the exergetic efficiency of a MSF plant according to the classical formula will be not onlyinconvenient but also insignificant.As a result of present analysis,the reasonable parameters based on theenergy consumption are easily chosen.The above-mentioned principles are confirmed by commercial plants and a pilot plant in Tianjin.展开更多
MPW (magnetic pulse welding) is a solid state joining technology that allows for the generation of strong metallic bonds, even between dissimilar metals. Due to the absence of external heat, critical intermetallic p...MPW (magnetic pulse welding) is a solid state joining technology that allows for the generation of strong metallic bonds, even between dissimilar metals. Due to the absence of external heat, critical intermetallic phases can largely be avoided. In this process, Lorentz forces are utilized for the rapid acceleration of at least one of the two metallic joining partners leading to the controlled high velocity impact between them. The measurement of the collision conditions and their targeted manipulation are the key factors of a successful process development. Optical measuring techniques are preferred, since they are not influenced by the prevalent strong magnetic field in the vicinity of the working coil. In this paper, the characteristic high velocity impact flash during MPW was monitored and evaluated using phototransistors in order to measure the time of the impact. The results are in good accordance with the established PDV (photon Doppler velocimetry) and show a good repeatability. Furthermore, the collision front velocity was investigated using adapted part geometries within a series of tests. This velocity component is one of the key parameters in MPW; its value decreases along the weld zone. With the help of this newly introduced measurement tool, the magnetic pressure distribution or the joining geometry can be adjusted more effectively.展开更多
基金supported in part by the National Key Research and Development Program of China(2019YFB1503700)the Hunan Natural Science Foundation-Science and Education Joint Project(2019JJ70063)。
文摘The noise that comes from finite element simulation often causes the model to fall into the local optimal solution and over fitting during optimization of generator.Thus,this paper proposes a Gaussian Process Regression(GPR)model based on Conditional Likelihood Lower Bound Search(CLLBS)to optimize the design of the generator,which can filter the noise in the data and search for global optimization by combining the Conditional Likelihood Lower Bound Search method.Taking the efficiency optimization of 15 kW Permanent Magnet Synchronous Motor as an example.Firstly,this method uses the elementary effect analysis to choose the sensitive variables,combining the evolutionary algorithm to design the super Latin cube sampling plan;Then the generator-converter system is simulated by establishing a co-simulation platform to obtain data.A Gaussian process regression model combing the method of the conditional likelihood lower bound search is established,which combined the chi-square test to optimize the accuracy of the model globally.Secondly,after the model reaches the accuracy,the Pareto frontier is obtained through the NSGA-II algorithm by considering the maximum output torque as a constraint.Last,the constrained optimization is transformed into an unconstrained optimizing problem by introducing maximum constrained improvement expectation(CEI)optimization method based on the re-interpolation model,which cross-validated the optimization results of the Gaussian process regression model.The above method increase the efficiency of generator by 0.76%and 0.5%respectively;And this method can be used for rapid modeling and multi-objective optimization of generator systems.
文摘Different pre-heating of boron carbide particles for reinforcement and different processing conditions were studied in this work. Being one of the most cost-effective industrial methods, conventional melt stir-casting route was utilized.Result showed that the boron carbide particles distributed well for a suitable pre-heating temperature and processed in air.No reaction product was found at the A1-B4C interfaces at the resolution limit of SEM used in that way.
基金the National Key R&D Program of China-National Magnetic Confinement Fusion Science Program(No.2017YFE0300305).
文摘China Fusion Engineering Test Reactor(CFETR)is China's self-designed and ongoing next-generation fusion reactor project.Tritium confinement systems in CFETR guarantee that the radiation level remains below the safety limit during tritium handling and operation in the fuel cycle system.Our tritium technology team is responsible for studying tritium transport behavior in the CFETR tritium safety confinement systems of the National Key R&D Program of China launched in 2017,and we are conducting CFETR tritium plant safety analysis by using CFD software.In this paper,the tritium migration and removal behavior were studied under a postulated accident condition for the Tokamak Exhaust Processing system of CFETR.The quantitative results of the transport behavior of tritium in the process room and glove box during the whole accident sequence(e.g.,tritium release,alarm,isolation,and tritium removal)have been presented.The results support the detailed design and engineering demonstration-related research of CFETR tritium plant.
文摘Invertibility is one of the desirable properties of moving average processes. This study derives consequences of the invertibility condition on the parameters of a moving average process of order three. The study also establishes the intervals for the first three autocorrelation coefficients of the moving average process of order three for the purpose of distinguishing between the process and any other process (linear or nonlinear) with similar autocorrelation structure. For an invertible moving average process of order three, the intervals obtained are , -0.5ρ2ρ1<0.5.
基金Supported by Doctoral Start-up Fund of Guangxi Minzu Normal University(2021 BS003).
文摘[Objectives]To explore the extraction conditions of essential oil from eucalyptus leaves.[Methods]The essential oil of eucalyptus leaves was extracted by steam distillation,and the yields of essential oil from eucalyptus leaves under different extraction times,soaking times and different solid-liquid ratios were analyzed through orthogonal test with three factors and three variables.[Results]The effects of various factors on extraction results were:distillation time>solid-liquid ratio>soaking time.When the extraction time and soaking time were 1.5 and 2 h,and the solid-liquid ratio of eucalyptus leaves to distilled water was 1:10,the yield of essential oil was the highest(0.8%).The yield of essential oil increased with the increase of extraction and soaking time,but when reaching the optimal value,the yield decreased with the extension of time.Increasing the solid-liquid ratio can improve the yield of essential oil,but beyond a certain value the yield increased gradually while the cost performance decreased.[Conclusions]The results will provide some reference for the recovery and utilization of eucalyptus leaves.
基金supports provided by International Atomic Energy TC Project (No. PRC\08\015)the National Natural Science Founda-tion of China (No. 50579017)
文摘In this study, with the method of vacuum extraction, two evaporative processes of soil water and free water under equilibrium condition were simulated. For each sample,water vapor was condensed by liquid nitrogen and was collected in four time intervals. From the analysis of hydrogen and oxygen isotopic compositions of the water collected at different times, it was discovered that the isotope fractionation of soil water also follows the mode, which is just the same as the evaporative process of free water. The relationship between the stable hydrogen and oxygen isotopes in residual water showed that the simulative evaporation line was close to the global meteoric water line (GMWL) under the equilibrium condition at about 20℃. Comparison of the two types of evaporative processes indicated that the isotope fractionation and evaporation velocity of soil water were only slightly modified by the Van der Waals force.
文摘Through exploring the effects of low pH on the composite system of desulfurization gypsum(DG)enhanced by melamine-formaldehyde resin(MF),it is found that the inducing of sulfate-ion,in contrast to chloride and oxalate ions,favors the longitudinal growth of the crystalline form of the hydration product,which was relatively simple and had the highest length to width(L/D)ratio.At the same time,MF can also improve L/D ratio of gypsum hydration products,which favors the formation of hydrated whiskers.Finally,in a composite system composed of hemihydrate gypsum,MF,and glass fibers,when dilute sulfuric acid was used to regulate pH=3-4,the tight binding formed among the components of the composite system compared to pH=5-6.The hydration product of gypsum adheres tightly to glass fiber surface and produces a good cross-linking and binding effect with MF.The flexural strength,compressive strength,elastic modulus,and water absorption of the desulphurized gypsum composite board is 22.7 MPa,39.8 MPa,5608 MPa,and 1.8%,respectively.
文摘Potassium bismuth titanate nanosized powders were prepared by the hydrothermal method using Ti(C_4H_9O)_4 and Bi(NO_3)_3·5H_2O as raw materials in alkaline solution.The phase composition,particle size and morphology of the powders were studied by XRD and TEM analysis.The results showed that the powders were well crystallized and dispersed.The crystal phase of the powders was K_(0.5)Bi_(0.5)TiO_3 with the grain size of about 50 nm~100 nm.Hydrothermal temperature and alkaline concentrations had great effects on the phase composition and morphology of the resultant powders.Pure K_(0.5)Bi_(0.5)TiO_3 powders could be synthesized at 170℃~180℃with KOH concentration of 8 mol/L~12 mol/L.
文摘The multi-hollow three dimensional(3-D)crimp sta-ple were prepared by the non-symmetrical cooling spin-ning technology.The material properties,spinneret shape,drawing conditions,heat-setting conditions and silicon finishing conditions that influence the compression elasticity of the staple have been investigated.It is found that the compression elasticity of 3-D crimp PET staple is larger than that of 3-D crimp PP staple.The com-pression elasticity of the 5-hollow staple is much
文摘On the basis of regressional relationship between nutritional indexes and technological conditions,when confronted with feed quality that contains multiple nutritional indexes,a comprehensive equation of evaluating feed quality was developed by using fuzzy mathematical method at first in this study,and then the optimum technological conditions were established by introduction of statistical frequency analysis method pursuant to the comprehensive evaluating equation mentioned above compared with conventional multi-aim nonlinear programming,this method can lead to easy solutions,and also can make adjustment of the importance of nutritional indexes to feed quality according to practical considerations.An example was given of soybean extruding to show how the method worked.
文摘A big debris flow which was arosed by landslide occurrence at night on July 11, 2003 in Qiongshan Ravine, Danba, Sichuan Province. According to the research, debris flow in Qiongshan Ravine is arosed by the fluidization of landslide. It had been rained about 70 days before debris flow occurred. That made the sediments in the gully to near to saturated or saturated in water. Being affect by the steep geography, the sediments occurrence peristalsis to transform, parts of soil bodies start disintegrate. All the sediments become transforming with water inleakaging to sediments, and than foreside slope flow to gully quickly after becoming fluidization. And the sediments come into being the debris flow with the water of the gully joining.
文摘It is a well known fact that for the hierarchical model of a Poisson random variable Y?whose mean has an Erlang distribution, the unconditional distribution of Y is negative binomial. However, the proofs in the literature [1] [2] provide no intuitive understanding as to why this result should be true. It is the purpose of this manuscript to give a new proof of this result which provides such an understanding. The memoryless property of the exponential distribution allows one to conclude that the events in two independent Poisson processes may be regarded as Bernoulli trials, and this fact is used to achieve the research purpose. Another goal of this manuscript is to give another proof of this last fact which does not rely on the memoryless property.
文摘Business growth and development are similar to a selforganization evolution system. This paper intends to explore the context, drive and process within enterprise self-organization evolution from a conceptual perspective. And an enterprise evolution model can be applied on the basis of ecological logistic equations to approach the elementary process and the growth stage of organization. Moreover,the influence of diverse variable on the evolution of enterprise growth is discussed. At last, the study concludes that new structures and functions can emerge within organizations and enterprises,which contribute to transformation and upgrade during their self-organization evolution.
基金Project supported by the China Postdoctoral Science Foundation (Grant No. 2012M511603)the National Natural Science Foundation of China (Grant Nos. 11105057 and 10775025)+1 种基金the Natural Science Foundation of Hubei Province of China (Grant No. 2007ABA035)the Program for New Century Excellent Talents in University of China (Grant No. NCET-08-0073)
文摘A two-dimensional (2D) fluid model is presented to study the behavior of silicon plasma mixed with SiH4 , N2 , and NH3 in a radio-frequency capacitively coupled plasma (CCP) reactor. The plasma–wall interaction (including the deposition) is modeled by using surface reaction coefficients. In the present paper we try to identify, by numerical simulations, the effect of variations of the process parameters on the plasma properties. It is found from our simulations that by increasing the gas pressure and the discharge gap, the electron density profile shape changes continuously from an edge-high to a center-high, thus the thin films become more uniform. Moreover, as the N2 /NH3 ratio increases from 6/13 to 10/9, the hydrogen content can be significantly decreased, without decreasing the electron density significantly.
文摘The magneto-caloric effect of Gd5 Si2Ge2 compounds produced by various techniques is investigated in terms of their magnetization behaviors in the magnetic field from 0 to 2.0 T.The studied materials include arc-melted, annealed and sintered alloys.The results demonstrate that the Gd5Si2Ge2 alloys obtained under different processing conditions possess distinct magneto-caloric effect due to their various microstructures.Proper annealing treatment can enhance the magneto-caloric effect of the alloy remarkably.While the sintered alloy bears relatively lower value of magnetic entropy change ( △ SM) than arc-melted one.The magnetic entropy change of the annealed Gd5 Si2Ge2 alloy arrives the arrives the maximum value of - △SM = 15.29 J· kg-1· K-1 for magnetic field change under 2.0 T in the present work.
文摘A new interlacer is used in this paper to investigate the effect of processing conditions on the properties of interlaced yarn. The experimental results show that number of tangles of interlaced yarn changes little with air pressure from 0.2 MPa to 0.5 MPa, and the number of tangles has a maximum value with yarn speed changing. For two yarn directions of entering and leaving yarn guide of interalcer, the yarn speed for the maximum number of tangles is 400 m/rain and 600 m/rain, respectively. The number of tangles changes with air pressure and yarn speed for two yarn directions is compared.
文摘Real-time capabilities and computational efficiency are provided by parallel image processing utilizing OpenMP. However, race conditions can affect the accuracy and reliability of the outcomes. This paper highlights the importance of addressing race conditions in parallel image processing, specifically focusing on color inverse filtering using OpenMP. We considered three solutions to solve race conditions, each with distinct characteristics: #pragma omp atomic: Protects individual memory operations for fine-grained control. #pragma omp critical: Protects entire code blocks for exclusive access. #pragma omp parallel sections reduction: Employs a reduction clause for safe aggregation of values across threads. Our findings show that the produced images were unaffected by race condition. However, it becomes evident that solving the race conditions in the code makes it significantly faster, especially when it is executed on multiple cores.
文摘We consider risk minimization problems for Markov decision processes. From a standpoint of making the risk of random reward variable at each time as small as possible, a risk measure is introduced using conditional value-at-risk for random immediate reward variables in Markov decision processes, under whose risk measure criteria the risk-optimal policies are characterized by the optimality equations for the discounted or average case. As an application, the inventory models are considered.
文摘The exergy losses and thermodynamic efficiency of MSF plant with brine recirculation are discussed bymeans of temperature difference functions proposed by the auther.In a MSF plant,the irreversible losses are found mainly in irreversible heat-transfer and flash evaporationprocesses.However,the basic variables are the temperature drop from stage to stage and the temperaturedifferences between flashed vapor and cooling water.In this paper,the flash temperature difference func-tion,the heat transfer temperature difference function and the total temperature difference function are sug-gested.The proposed temperature difference functions of MSF plant provide a convenient tool to analyse theirreversible behavior and evaluate the exergetic efficiency of this system,because without such improvement thecalculation of the exergetic efficiency of a MSF plant according to the classical formula will be not onlyinconvenient but also insignificant.As a result of present analysis,the reasonable parameters based on theenergy consumption are easily chosen.The above-mentioned principles are confirmed by commercial plants and a pilot plant in Tianjin.
文摘MPW (magnetic pulse welding) is a solid state joining technology that allows for the generation of strong metallic bonds, even between dissimilar metals. Due to the absence of external heat, critical intermetallic phases can largely be avoided. In this process, Lorentz forces are utilized for the rapid acceleration of at least one of the two metallic joining partners leading to the controlled high velocity impact between them. The measurement of the collision conditions and their targeted manipulation are the key factors of a successful process development. Optical measuring techniques are preferred, since they are not influenced by the prevalent strong magnetic field in the vicinity of the working coil. In this paper, the characteristic high velocity impact flash during MPW was monitored and evaluated using phototransistors in order to measure the time of the impact. The results are in good accordance with the established PDV (photon Doppler velocimetry) and show a good repeatability. Furthermore, the collision front velocity was investigated using adapted part geometries within a series of tests. This velocity component is one of the key parameters in MPW; its value decreases along the weld zone. With the help of this newly introduced measurement tool, the magnetic pressure distribution or the joining geometry can be adjusted more effectively.