期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Transformation Behaviour of Austenite in Steel under Condition of Stress-strain and Its Application
1
作者 Xu WANG Sigen WANG and Lixian HUA (Dept. of Materials Science and Engineering, University of Science and Technology Beijing, Beijing, 100083, China) 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 1995年第6期440-442,共3页
Austenite can be retained at ambient temperature in steels by alloying and processing control. The transformation from austenite to martensite occurs under a certain conditions : thermal or deformation. Stress-strain ... Austenite can be retained at ambient temperature in steels by alloying and processing control. The transformation from austenite to martensite occurs under a certain conditions : thermal or deformation. Stress-strain induced martensitic transformation is important to improve the plasticity of steels which is called transformation induced plasticity (TRIP). Strength-ductility balance of the steels is greatly superior to that of other high strength steels due to the TRIP effect. A new type of steels-TRIP steel is developed 展开更多
关键词 TRIP transformation Behaviour of Austenite in Steel under Condition of Stress-strain and Its Application
下载PDF
Reaction condition optimization and kinetic investigation of roasting zinc oxide ore using (NH_4)_2SO_4 被引量:7
2
作者 Hong-mei Shao Xiao-yi Shen +2 位作者 Yi Sun Yan Liu Yu-chun Zhai 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2016年第10期1133-1140,共8页
An orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore using(NH_4)_2SO_4. The optimized reaction conditions are defined as an(NH_4)_2SO_4/zinc molar ratio of 1.4:1, a roasting ... An orthogonal test was used to optimize the reaction conditions of roasting zinc oxide ore using(NH_4)_2SO_4. The optimized reaction conditions are defined as an(NH_4)_2SO_4/zinc molar ratio of 1.4:1, a roasting temperature of 440°C, and a thermostatic time of 60 min. The molar ratio of(NH_4)_2SO_4/zinc is the most predominant factor and the roasting temperature is the second significant factor that governs the zinc extraction. Thermogravimetric-differential thermal analysis was used for(NH_4)_2SO_4 and zinc mixed in a molar ratio of 1.4:1 at the heating rates of 5, 10, 15, and 20 K·min-1. Two strong endothermic peaks indicate that the complex chemical reactions occur at approximately 290°C and 400°C. XRD analysis was employed to examine the transformations of mineral phases during roasting process. Kinetic parameters, including reaction apparent activation energy, reaction order, and frequency factor, were calculated by the Doyle-Ozawa and Kissinger methods. Corresponding to the two endothermic peaks, the kinetic equations were obtained. 展开更多
关键词 zinc ore treatment extractive metallurgy kinetic studies reaction mechanisms phase transformation reaction conditions
下载PDF
ADMISSIBLE WAVELETS ON THE PRODUCT HEISENBERG GROUP H_n
3
作者 何建勋 彭立中 《Acta Mathematica Scientia》 SCIE CSCD 1998年第S1期58-67,共10页
Let H. be the n-direct proded of Heisenbery group H, P the affine group of Hn. Then P ho a natural unitary representation U on L2(Hn). In this paper,the direct sum decomposition of irreducible invariant closed subspac... Let H. be the n-direct proded of Heisenbery group H, P the affine group of Hn. Then P ho a natural unitary representation U on L2(Hn). In this paper,the direct sum decomposition of irreducible invariant closed subspaces under unitary representation U for L2(Hn) is given. The restrictins of U on these subspaces are square-integrable. The charactedsation of admissible condition is obtained in ierms of the Fourier transform. By seleting appropriately an orthogonal wavelet basis and the wavelet transform,the authors obtain the orthogonal direct chin decomposinon of function space L2(P,dμl). 展开更多
关键词 Admissible condition Wavelet transform Heisenbery group Orthogonal dir4ect sum decomposition Generalized upper half-plance
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部