This paper analyzed the consistency of some parameters of soils in the literature and experimental results from fall cone test and its application to soil plasticity classification.Over 500 data from both literatures ...This paper analyzed the consistency of some parameters of soils in the literature and experimental results from fall cone test and its application to soil plasticity classification.Over 500 data from both literatures and experiments using fall cone and Casagrande methods were compiled to assess the relationships among specified water content,cone penetration index ebT,and plasticity angle eaT of finegrained soils.The results indicate that no unique correlation exists among b,liquid limit of the fall cone test(LLc)and a.The water content at 1 mm cone penetration eC0T correlates well with b,plasticity ratio eRpT(i.e.the ratio of plastic limit to liquid limit),and a.Finally,the potential of using the btan a diagram to classify soil plasticity was also discussed.展开更多
The volume of a cone is one third of the volume of a cylinder if they share same base and equal height. Let’s propose a hypothesis, if we expand the research area from cones to elliptical cones, could the maximum rat...The volume of a cone is one third of the volume of a cylinder if they share same base and equal height. Let’s propose a hypothesis, if we expand the research area from cones to elliptical cones, could the maximum ratio of volume beyond one third? This paper tries to pull away the veils of it. Firstly, we present four types of inscribed elliptical cones inside cylinders, and con-sequently all the other inscribed elliptical cones can be classified to these four types. Secondly, for each type of them, this paper discusses the corresponding volume ratio of the inscribed elliptical cone to the cylinder. It is concluded that the largest ratio of the volume of an inscribed cone to that of the cylinder is 1/3. Finally, two types whose ratio could reach 1/3 are given as examples.展开更多
The hole reaming and side cutting characteristics of offset one-cone bit and conventional one- cone bit were investigated on simulated drilling experimental equipment. The borehole diameter was a little larger than th...The hole reaming and side cutting characteristics of offset one-cone bit and conventional one- cone bit were investigated on simulated drilling experimental equipment. The borehole diameter was a little larger than the bit diameter due to side force. However, the reaming effect was not very apparent, whether drilling with an offset or conventional one-cone bit. The side cutting displacement increased gradually with increasing depth of drilling and side force. The side cutting displacement of offset onecone bits was larger than that of conventional ones under the same conditions of weight-on-bit （WOB）, rotary speed, side force and borehole depth.展开更多
Field emission electric propulsion(FEEP) thrusters possess excellent characteristics, such as high specific impulse, low power requirements, compact size and precise pointing capabilities,making them ideal propulsion ...Field emission electric propulsion(FEEP) thrusters possess excellent characteristics, such as high specific impulse, low power requirements, compact size and precise pointing capabilities,making them ideal propulsion devices for micro-nano satellites. However, the detection of certain aspects, such as the evolution process of the liquid cone and the physical quantities at the cone apex, proves challenging due to the minute size of the needle tip and the vacuum environment in which they operate. Consequently, this paper introduces a computational fluid dynamics(CFD) model to gain insight into the formation process of the liquid cone on the tip apex of indium FEEP. The CFD model is based on electrohydrodynamic(EHD) equations and the volume of fluid(VOF) method. The entire cone formation process can be divided into three stages, and the time-dependent characteristics of the physical quantities at the cone apex are investigated. The influences of film thickness, apex radius size and applied voltage are compared.The results indicate a gradual increase in the values of electrostatic stress and surface tension stress at the cone apex over an initial period, followed by a rapid escalation within a short duration.Apex configurations featuring a small radius, thick film and high voltage exhibit a propensity for liquid cone formation, and the cone growth time decreases as the film thickness increases.Moreover, some unstable behavior is observed during the cone formation process.展开更多
The present paper examines the temperature-dependent viscosity and thermal conductivity of a micropolar silver(Ag)−Magnesium oxide(MgO)hybrid nanofluid made of silver and magnesium oxide over a rotating vertical cone,...The present paper examines the temperature-dependent viscosity and thermal conductivity of a micropolar silver(Ag)−Magnesium oxide(MgO)hybrid nanofluid made of silver and magnesium oxide over a rotating vertical cone,with the influence of transverse magnetic field and thermal radiation.The physical flow problem has been modeled with coupled partial differential equations.We apply similarity transformations to the nondimensionalized equations,and the resulting nonlinear differential equations are solved using overlapping grid multidomain spectral quasilinearization method.The flow behavior for the fluid is scrutinized under the impact of diverse physical constraints,which are illustrated graphically.The results of the skin friction coefficient and Nusselt number varying different flow parameters are presented in the form of a table.It is observed that the main flow of the hybrid nanofluid,nano particle fraction of silver and Magnesium/water,enhances compared to the mono-nano fluid MgO as the coupling number increases.The application of studies like this can be found in the atomization process of liquids such as centrifugal pumps,viscometers,rotors,fans.展开更多
In order to obtain the reasonable undrained shear strength Su for geotechnical analyses of bridge foundations in Yangtze River floodplain clayey soils, a site-specific study is conducted using the imported piezocone p...In order to obtain the reasonable undrained shear strength Su for geotechnical analyses of bridge foundations in Yangtze River floodplain clayey soils, a site-specific study is conducted using the imported piezocone penetration test （CPTu） with dissipation phases at the Fourth Nanjing Yangtze River Bridge construction sites. Taking the values of Su from laboratory tests as references, several existing Su-predicted methods based on CPTu are compared and evaluated. To verify the presented cone factor Nk, additional test sites are selected and examined. The results show that the values of cone factors such as Nkt, Nke, and Nau, depend on the shear test mode and disturbance. Generally, the values of Nke show more scattering than those of Nkt and N△u. For the stratified and layered sediments of the Yangtze River floodplain, it is recommended using the net cone resistance qT to estimate Su and the preliminary cone factor values Nkt are from 7 to 16, with an average of 11. It is also confirmed that the CPTu test, as a new technique in site characterization, can present reasonable parameters for bridge foundations.展开更多
Novel headstand pyrocarbon cones （HPCs） with hollow structure were developed on the surfaces of pyrocarbon layers of the carbon/carbon （C/C） composites at 650-750 °C by the electromagnetic-field-assisted chem...Novel headstand pyrocarbon cones （HPCs） with hollow structure were developed on the surfaces of pyrocarbon layers of the carbon/carbon （C/C） composites at 650-750 °C by the electromagnetic-field-assisted chemical vapor deposition in the absence of catalysts. The fine microstructures of the HPCs were characterized by high-resolution transmission electron microscopy. The results show that the textural features of the HPCs directly transfer from turbostratic structure in roots to a well-ordered high texture in stems. And the degree of high texture ordering decreases gradually from the stem to the tail of the HPCs. The formation mechanism of the HPCs was inferred as the comprehensive effect of polarization induction on electromagnetic fields and particle-filler property under disruptive discharge.展开更多
Seed cone in Platycladus orientalis (L.) France consists of four or five pairs of decussate bracts. Usually, two pairs of the fertile bracts in the middle of the cone subtend six ovules, which initiate in an acropeta...Seed cone in Platycladus orientalis (L.) France consists of four or five pairs of decussate bracts. Usually, two pairs of the fertile bracts in the middle of the cone subtend six ovules, which initiate in an acropetal manner. Only one ovule presents on each of the upper fertile bract, while two ovules initiate from a common primordium in the axil of lower bracts. In Beijing, most female cones initiated in July. All parts of the cone formed before dormancy, which occurred during November to the next January. After pollination in March, bract morphology changed dramatically; intercalary growth of the bract base formed a conspicuous protuberance, in which inverted vascular system developed. Furthermore, ovules on different pairs of bracts initiated in an acropetal manner and two ovules in each lower fertile bract initiated from a common primordium, which was different from the basipetal initiation of ovules and independently formed single ovule as reported by Takaso in Calltris展开更多
文摘This paper analyzed the consistency of some parameters of soils in the literature and experimental results from fall cone test and its application to soil plasticity classification.Over 500 data from both literatures and experiments using fall cone and Casagrande methods were compiled to assess the relationships among specified water content,cone penetration index ebT,and plasticity angle eaT of finegrained soils.The results indicate that no unique correlation exists among b,liquid limit of the fall cone test(LLc)and a.The water content at 1 mm cone penetration eC0T correlates well with b,plasticity ratio eRpT(i.e.the ratio of plastic limit to liquid limit),and a.Finally,the potential of using the btan a diagram to classify soil plasticity was also discussed.
文摘The volume of a cone is one third of the volume of a cylinder if they share same base and equal height. Let’s propose a hypothesis, if we expand the research area from cones to elliptical cones, could the maximum ratio of volume beyond one third? This paper tries to pull away the veils of it. Firstly, we present four types of inscribed elliptical cones inside cylinders, and con-sequently all the other inscribed elliptical cones can be classified to these four types. Secondly, for each type of them, this paper discusses the corresponding volume ratio of the inscribed elliptical cone to the cylinder. It is concluded that the largest ratio of the volume of an inscribed cone to that of the cylinder is 1/3. Finally, two types whose ratio could reach 1/3 are given as examples.
文摘The hole reaming and side cutting characteristics of offset one-cone bit and conventional one- cone bit were investigated on simulated drilling experimental equipment. The borehole diameter was a little larger than the bit diameter due to side force. However, the reaming effect was not very apparent, whether drilling with an offset or conventional one-cone bit. The side cutting displacement increased gradually with increasing depth of drilling and side force. The side cutting displacement of offset onecone bits was larger than that of conventional ones under the same conditions of weight-on-bit （WOB）, rotary speed, side force and borehole depth.
基金supported by National Natural Science Foundation of China(No.52075334)。
文摘Field emission electric propulsion(FEEP) thrusters possess excellent characteristics, such as high specific impulse, low power requirements, compact size and precise pointing capabilities,making them ideal propulsion devices for micro-nano satellites. However, the detection of certain aspects, such as the evolution process of the liquid cone and the physical quantities at the cone apex, proves challenging due to the minute size of the needle tip and the vacuum environment in which they operate. Consequently, this paper introduces a computational fluid dynamics(CFD) model to gain insight into the formation process of the liquid cone on the tip apex of indium FEEP. The CFD model is based on electrohydrodynamic(EHD) equations and the volume of fluid(VOF) method. The entire cone formation process can be divided into three stages, and the time-dependent characteristics of the physical quantities at the cone apex are investigated. The influences of film thickness, apex radius size and applied voltage are compared.The results indicate a gradual increase in the values of electrostatic stress and surface tension stress at the cone apex over an initial period, followed by a rapid escalation within a short duration.Apex configurations featuring a small radius, thick film and high voltage exhibit a propensity for liquid cone formation, and the cone growth time decreases as the film thickness increases.Moreover, some unstable behavior is observed during the cone formation process.
文摘The present paper examines the temperature-dependent viscosity and thermal conductivity of a micropolar silver(Ag)−Magnesium oxide(MgO)hybrid nanofluid made of silver and magnesium oxide over a rotating vertical cone,with the influence of transverse magnetic field and thermal radiation.The physical flow problem has been modeled with coupled partial differential equations.We apply similarity transformations to the nondimensionalized equations,and the resulting nonlinear differential equations are solved using overlapping grid multidomain spectral quasilinearization method.The flow behavior for the fluid is scrutinized under the impact of diverse physical constraints,which are illustrated graphically.The results of the skin friction coefficient and Nusselt number varying different flow parameters are presented in the form of a table.It is observed that the main flow of the hybrid nanofluid,nano particle fraction of silver and Magnesium/water,enhances compared to the mono-nano fluid MgO as the coupling number increases.The application of studies like this can be found in the atomization process of liquids such as centrifugal pumps,viscometers,rotors,fans.
基金The National Natural Science Foundation of China(No.40702047)
文摘In order to obtain the reasonable undrained shear strength Su for geotechnical analyses of bridge foundations in Yangtze River floodplain clayey soils, a site-specific study is conducted using the imported piezocone penetration test （CPTu） with dissipation phases at the Fourth Nanjing Yangtze River Bridge construction sites. Taking the values of Su from laboratory tests as references, several existing Su-predicted methods based on CPTu are compared and evaluated. To verify the presented cone factor Nk, additional test sites are selected and examined. The results show that the values of cone factors such as Nkt, Nke, and Nau, depend on the shear test mode and disturbance. Generally, the values of Nke show more scattering than those of Nkt and N△u. For the stratified and layered sediments of the Yangtze River floodplain, it is recommended using the net cone resistance qT to estimate Su and the preliminary cone factor values Nkt are from 7 to 16, with an average of 11. It is also confirmed that the CPTu test, as a new technique in site characterization, can present reasonable parameters for bridge foundations.
基金Project (2011CB605801) supported by the National Basic Research Program of ChinaProject (2011M500127) supported by the China Postdoctoral Science Foundation+1 种基金Projects (50802115, 51102089) supported by the National Natural Science Foundation of ChinaProject supported by the Postdoctoral Fund of the Central South University, China
文摘Novel headstand pyrocarbon cones （HPCs） with hollow structure were developed on the surfaces of pyrocarbon layers of the carbon/carbon （C/C） composites at 650-750 °C by the electromagnetic-field-assisted chemical vapor deposition in the absence of catalysts. The fine microstructures of the HPCs were characterized by high-resolution transmission electron microscopy. The results show that the textural features of the HPCs directly transfer from turbostratic structure in roots to a well-ordered high texture in stems. And the degree of high texture ordering decreases gradually from the stem to the tail of the HPCs. The formation mechanism of the HPCs was inferred as the comprehensive effect of polarization induction on electromagnetic fields and particle-filler property under disruptive discharge.
文摘Seed cone in Platycladus orientalis (L.) France consists of four or five pairs of decussate bracts. Usually, two pairs of the fertile bracts in the middle of the cone subtend six ovules, which initiate in an acropetal manner. Only one ovule presents on each of the upper fertile bract, while two ovules initiate from a common primordium in the axil of lower bracts. In Beijing, most female cones initiated in July. All parts of the cone formed before dormancy, which occurred during November to the next January. After pollination in March, bract morphology changed dramatically; intercalary growth of the bract base formed a conspicuous protuberance, in which inverted vascular system developed. Furthermore, ovules on different pairs of bracts initiated in an acropetal manner and two ovules in each lower fertile bract initiated from a common primordium, which was different from the basipetal initiation of ovules and independently formed single ovule as reported by Takaso in Calltris
