Load Static Models for Conservation Voltage Reduction in the Presence of Harmonics

The Conservation Voltage Reduction (CVR) is a technique that aims to achieve the decrease of power consumption as a result of voltage reduction. The customer is supplied with the lowest possible voltage level compatible with the stipulated level by the regulatory agency. International Standards ANSI C84.1-2006 and IEEE std 1250-1995 specify the range of supply voltage to electronics equipment from 0.9 to 1.05 pu of nominal voltage. To analyse the CVR effect in distribution systems with different load characteristics (residential, commercial, industrial or a combination of these), mathematical load models are used. Typically, these equipment/load models are used to analyse load aggregation without any consideration of its nonlinearity characteristics. Aiming to analyse the nonlinear characteristics and its consequences, this paper presents a discussion of the neglected variables as well as the results of a set of measurements of nonlinear loads. Different mathematical models are applied to obtain them for each load. Using these models the load aggregation is evaluated. It is presented that although the models show adequate results for individual loads, the same does not occur for aggregated models if the harmonic contribution is not considered. Consequently, to apply the load model in CVR it is necessary to consider the harmonics presence and the model has to be done using only the fundamental frequency data. The discussion about the causes is done and the models are compared with the measurements.

Load Shedding and Restoration for Intentional Island with Renewable Distributed Generation

Due to the high penetration of renewable distributed generation(RDG),many issues have become conspicuous during the intentional island operation such as the power mismatch of load shedding during the transition process and the power imbalance during the restoration process.In this paper,a phase measurement unit(PMU)based online load shedding strategy and a conservation voltage reduction(CVR)based multi-period restoration strategy are proposed for the intentional island with RDG.The proposed load shedding strategy,which is driven by the blackout event,consists of the load shedding optimization and correction table.Before the occurrence of the large-scale blackout,the load shedding optimization is solved periodically to obtain the optimal load shedding plan,which meets the dynamic and steady constraints.When the blackout occurs,the correction table updated in real time based on the PMU data is used to modify the load shedding plan to eliminate the power mismatch caused by the fluctuation of RDG.After the system transits to the intentional island seamlessly,multi-period restoration plans are generated to optimize the restoration performance while maintaining power balance until the main grid is repaired.Besides,CVR technology is implemented to restore more loads by regulating load demand.The proposed load shedding optimization and restoration optimization are linearized to mixed-integer quadratic constraint programming(MIQCP)models.The effectiveness of the proposed strategies is verified with the modified IEEE 33-node system on the real-time digital simulation(RTDS)platform.

Energy Savings Estimation of a Distribution System in Presence of Intelligent Volt-VAr Control Based on IEEE Std.1547-2018

In the present scenario,many solar photovoltaic(SPV)systems have been installed in the distribution network,most of them are operating at the unity power factor,which does not provide any reactive power support.In future distribution grids,there will be significant advances in operating strategies of SPV systems with the introduction of smart inverter functions.The new IEEE Std.1547-2018 incorporates dynamic Volt/VAr control(VVC)for smart inverters.These smart inverters can inject or absorb reactive power and maintain voltages at points of common coupling(PCCs)based on local voltage measurements.With multiple inverter-interfaced SPV systems connected to the grid,it becomes a necessary task to develop local,distributed or hybrid VVC algorithms for maximization of energy savings.This paper aims to estimate substation energy savings through centralized and decentralized control of inverters of SPV system alongside various VVC devices.Control strategies of each SPV inverter have been accomplished in compliance with IEEE Std.1547-2018.Time-series simulations are carried out on the modified IEEE-123 node test system.By utilizing smart inverters in traditional SPV systems,considerable energy savings can be obtained.These savings can be further increased by incorporating optimal intelligent VVC characteristics(IVVCC).Results show that just by allowing smart inverters on a predefined IVVCC(as per IEEE Std.1547-2018),a reduction of 11.69%in reactive demand and 5.63%in active demand have been acquired when compared with a conventional SPV system.Reactive energy demand is additionally reduced to 48.42%by considering centralized control of VVC devices alongside optimal IVVCC.