One of the most effective methods for sand control is the chemical consolidation of sandstone structures.In this paper,the impacts of crude oil and brine in the static state and the impact of the flow rates of the flu...One of the most effective methods for sand control is the chemical consolidation of sandstone structures.In this paper,the impacts of crude oil and brine in the static state and the impact of the flow rates of the fluids in the dynamic state have been assessed at the reservoir conditions.The analyses in this research were Young’s modulus,compressive strength,porosity,and permeability which were done on core samples after and before fluid contact.Samples made with two different resins showed good resistance to crude oil in both states.No considerable change was seen in the analyses even at high crude oil injection rates in the dynamic state.Conversely,brine caused a noticeable change in the analyses in both states.In the presence of brine at the static state,Young’s modulus and compressive strength respectively decreased by 37.5%and 34.5%for epoxy cores,whereas these parameters respectively reduced by 30%and 41%for furan cores.In brine presence at the dynamic state,compressive strength reduction was 10.28 MPa for furan and 6.28 MPa for epoxy samples and their compressive strength reached 16.75 MPa and 26.54 MPa respectively which are higher than the critical point to be known as weak sandstone core.Moreover,Young’s modulus decrease values for furan and epoxy samples were respectively 0.37 GPa and 0.44 GPa.Therefore,brine had a more destructive effect on the mechanical characteristics of samples in the static state than the dynamic one for two resins.In addition,brine injection increased permeability by about 13.6%for furan and 34.8%for epoxy.Also,porosity raised by about 21.8%for furan,and 19%for epoxy by brine injection.The results showed that the chemical sand consolidation weakens in the face of brine production along with crude oil which can lead to increasing cost of oil production and treating wellbore again.展开更多
By means of flumes, experiments have been done in order to determine the effects of consolidation time and particle size on scour rates of cohesive sediment. Experimental results shown dry unit weight increased and sc...By means of flumes, experiments have been done in order to determine the effects of consolidation time and particle size on scour rates of cohesive sediment. Experimental results shown dry unit weight increased and scour rates decreased during the course of consolidation, the resistance to scour was related to consolidation time, but it presented different consolidation properties that depended on particle size. For the finer particle, the consolidation process was longer, the range of dry unit weight altered was greater, the consolidated sediments moved in chunks. On the other hand, based on analysis of the relationship of dry unit weight change with consolidation time, the simplified analytical expressions of dry unit weight and scour rates were derived, the results were checked with experimental data in the same flow situation and good agreements were achieved. Since the effects of different particle size were considered during the process of consolidation, the variations of consolidation properties were well reflected in these formulas.展开更多
文摘One of the most effective methods for sand control is the chemical consolidation of sandstone structures.In this paper,the impacts of crude oil and brine in the static state and the impact of the flow rates of the fluids in the dynamic state have been assessed at the reservoir conditions.The analyses in this research were Young’s modulus,compressive strength,porosity,and permeability which were done on core samples after and before fluid contact.Samples made with two different resins showed good resistance to crude oil in both states.No considerable change was seen in the analyses even at high crude oil injection rates in the dynamic state.Conversely,brine caused a noticeable change in the analyses in both states.In the presence of brine at the static state,Young’s modulus and compressive strength respectively decreased by 37.5%and 34.5%for epoxy cores,whereas these parameters respectively reduced by 30%and 41%for furan cores.In brine presence at the dynamic state,compressive strength reduction was 10.28 MPa for furan and 6.28 MPa for epoxy samples and their compressive strength reached 16.75 MPa and 26.54 MPa respectively which are higher than the critical point to be known as weak sandstone core.Moreover,Young’s modulus decrease values for furan and epoxy samples were respectively 0.37 GPa and 0.44 GPa.Therefore,brine had a more destructive effect on the mechanical characteristics of samples in the static state than the dynamic one for two resins.In addition,brine injection increased permeability by about 13.6%for furan and 34.8%for epoxy.Also,porosity raised by about 21.8%for furan,and 19%for epoxy by brine injection.The results showed that the chemical sand consolidation weakens in the face of brine production along with crude oil which can lead to increasing cost of oil production and treating wellbore again.
基金Project supported by the National Natural Science Foundation of China (Grant No. 50679064)the Fund of Ph. D. Student Supervisor of Ministry of Education of China (Grant No. 20050486007)the National Key Project for Basic Research (Grant No. 2003CB415200).
文摘By means of flumes, experiments have been done in order to determine the effects of consolidation time and particle size on scour rates of cohesive sediment. Experimental results shown dry unit weight increased and scour rates decreased during the course of consolidation, the resistance to scour was related to consolidation time, but it presented different consolidation properties that depended on particle size. For the finer particle, the consolidation process was longer, the range of dry unit weight altered was greater, the consolidated sediments moved in chunks. On the other hand, based on analysis of the relationship of dry unit weight change with consolidation time, the simplified analytical expressions of dry unit weight and scour rates were derived, the results were checked with experimental data in the same flow situation and good agreements were achieved. Since the effects of different particle size were considered during the process of consolidation, the variations of consolidation properties were well reflected in these formulas.