In the current vehicle electric propulsion systems,the thermal design of power modules heavily relies on empirical knowledge,making it challenging to effectively optimize irregularly arranged Pinfin structures,thereby...In the current vehicle electric propulsion systems,the thermal design of power modules heavily relies on empirical knowledge,making it challenging to effectively optimize irregularly arranged Pinfin structures,thereby limiting their performance.This paper aims to review the underlying mechanisms of how irregularly arranged Pinfins influence the thermal characteristics of power modules and introduce collaborative thermal design with DC bus capacitor and motor.Literature considers chip size,placement,coolant flow direction with the goal of reducing thermal resistance of power modules,minimizing chip junction temperature differentials,and optimizing Pinfin layouts.In the first step,algorithms should efficiently generating numerous unique irregular Pinfin layouts to enhance optimization quality.The second step is to efficiently evaluate Pinfin layouts.Simulation accuracy and speed should be ensured to improve computational efficiency.Finally,to improve overall heat dissipation effectiveness,papers establish models for capacitors,motors,to aid collaborative Pinfin optimization.These research outcomes will provide essential support for future developments in high power density motor drive for vehicles.展开更多
Sliding mode control(SMC)has been studied since the 1950s and widely used in practical applications due to its insensitivity to matched disturbances.The aim of this paper is to present a review of SMC describing the k...Sliding mode control(SMC)has been studied since the 1950s and widely used in practical applications due to its insensitivity to matched disturbances.The aim of this paper is to present a review of SMC describing the key developments and examining the new trends and challenges for its application to power electronic systems.The fundamental theory of SMC is briefly reviewed and the key technical problems associated with the implementation of SMC to power converters and drives,such chattering phenomenon and variable switching frequency,are discussed and analyzed.The recent developments in SMC systems,future challenges and perspectives of SMC for power converters are discussed.展开更多
Wide band-gap gallium nitride(GaN)device has the advantages of large band-gap,high electron mobility and low dielectric constant.Compared with traditional Si devices,these advantages make it suitable for fast-switchin...Wide band-gap gallium nitride(GaN)device has the advantages of large band-gap,high electron mobility and low dielectric constant.Compared with traditional Si devices,these advantages make it suitable for fast-switching and high-power-density power electronics converters,thus reducing the overall weight,volume and power consumption of power electronic systems.As a review paper,this paper summarizes the characteristics and development of the state-of-art GaN power devices with different structures,analyzes the research status,and forecasts the application prospect of GaN devices.In addition,the problems and challenges of GaN devices were discussed.And thanks to the advantages of GaN devices,both the power density and efficiency of motor drive system are improved,which also have been presented in this paper.展开更多
The superconducting tokamak HT-7U [1] has been designed by the Institute of Plasma Physics since 1998 and will be set up before 2003. The 1.2 MW /2.45 GHz HT-7U LHCD (Lower hybrid current drive) system which being the...The superconducting tokamak HT-7U [1] has been designed by the Institute of Plasma Physics since 1998 and will be set up before 2003. The 1.2 MW /2.45 GHz HT-7U LHCD (Lower hybrid current drive) system which being the most efficient non-induction device can heat the plasma and drive the plasma current has been efficiently in operation 'owl and a particular design of the 2.8 MW/-35 kV high-voltage DC power supply has been already completed and will apply to the klystron of LHCD on HT-7 and the future HT-7U, and the project of the power supply has been examined and approved professionally by an authorized group of high-level specialist in the institute of Plasma Physics. The detailed design of the power supply and the simulation results are referred in the paper.展开更多
In order to reduce the driving fatigue in sowing work, this paper based on heart rate （HR） as the main indicator to survey, tested and analyzed the fatigue condition of the drivers of three imported tractors and one...In order to reduce the driving fatigue in sowing work, this paper based on heart rate （HR） as the main indicator to survey, tested and analyzed the fatigue condition of the drivers of three imported tractors and one domestic tractor in sowing work. The results showed that when driving the imported tractors in sowing work, the HR increasing rate was 10.4%-14.3%, labor intensity belonged to the light level; when driving domestic tractor in sowing work, the HR increasing rate was 23.4%-33.0%, it was remarkably bigger than that of driving imported tractors （P〈0.05）, labor intensity belonged to the middle level. The main effects on driving fatigue included the control methods, tractors＇ cab environment, processing time, operating content, and so on. Finally, we proposed the concrete measures and suggestions to reduce driving fatigue and improve drivers＇ work condition.展开更多
In order to satisfy operating requirements for constant core drilling technology in reverse circulation with hollow-through DTH,the power unit of G-3 engineering driller was ameliorated. The new one with dual channel ...In order to satisfy operating requirements for constant core drilling technology in reverse circulation with hollow-through DTH,the power unit of G-3 engineering driller was ameliorated. The new one with dual channel drive shaft, achieved the perfect assemble with transmission structure of the original power unit. It could interconvert according to need by using two sets of drive shafts with direct and reverse circulation. The repacked G-3 engineering driller carried on experiment in the field test in Luanchuan molybdenum mine of Henan, whose effect was very good.展开更多
Taking into account the fact that the computer systems, as the implementations of Turing machine, are physical devices, the paper shows considerations in which hard drive behavior will be presented in terms of statist...Taking into account the fact that the computer systems, as the implementations of Turing machine, are physical devices, the paper shows considerations in which hard drive behavior will be presented in terms of statistical mechanics. Because computer is a machine, its analysis cannot be based only on mathematical models apart of physical conditions. In the paper it will be presented a very narrow part this problem – an analysis of hard drive behavior in the context of the power-law distributions. We will focus only on four selected hard drive parameters, i.e. the rate of transfer bytes to or from the disk during the read or write, the number of pending requests to the disk and the rate of read operations. Our research was performed under the Windows operating system and this allows to make a statistical analysis for the possible occurrence of power-laws representing the lack of characteristic scale for considered processes. This property will be confirmed in all analyzed cases. A presented study can help describing the behavior of the whole computer system in terms of physics of computer processing.展开更多
To meet stringent requirements in vacuum and cleanness for semiconductor manufacturing, a new power drive module for Selective Compliant Assembly Robot Arm （SCARA） type robot has been developed for wafer-transfer. I...To meet stringent requirements in vacuum and cleanness for semiconductor manufacturing, a new power drive module for Selective Compliant Assembly Robot Arm （SCARA） type robot has been developed for wafer-transfer. In order to obtain complete hermetic volume for higher vacuum and prevent leakage of hazardous gases, feedthrough motions involving transfer between the vacuum and motors are achieved by the use of metal bellows and magnetic coupling. An analysis of the coaxial-type magnetic coupling by employing the technique of current sheet model is presented. This approach is proved to be a precise and easy method. The construction of power drive module shows its advantage in maintaining ultrahigh vacuum and also enhances the efficiency for transporting the wafer, as compared with conventional design.展开更多
基金supported in part by National Key R&D Program of China (2021YFB2500600)in part by Chinese Academy of Sciences Youth multi-discipline project (JCTD-2021-09)in part by Strategic Piority Research Program of Chinese Academy of Sciences (XDA28040100)
文摘In the current vehicle electric propulsion systems,the thermal design of power modules heavily relies on empirical knowledge,making it challenging to effectively optimize irregularly arranged Pinfin structures,thereby limiting their performance.This paper aims to review the underlying mechanisms of how irregularly arranged Pinfins influence the thermal characteristics of power modules and introduce collaborative thermal design with DC bus capacitor and motor.Literature considers chip size,placement,coolant flow direction with the goal of reducing thermal resistance of power modules,minimizing chip junction temperature differentials,and optimizing Pinfin layouts.In the first step,algorithms should efficiently generating numerous unique irregular Pinfin layouts to enhance optimization quality.The second step is to efficiently evaluate Pinfin layouts.Simulation accuracy and speed should be ensured to improve computational efficiency.Finally,to improve overall heat dissipation effectiveness,papers establish models for capacitors,motors,to aid collaborative Pinfin optimization.These research outcomes will provide essential support for future developments in high power density motor drive for vehicles.
基金supported in part by the National Key R&D Program of China(2019YFB1312000)the National Natural Science Foundation of China(62022030 and 62033005)+2 种基金the Fundamental Research Funds for the Central Universities(HIT.OCEF.2021005)the Heilongjiang Provincial Natural Science Foundation of China(62033005)the SelfPlanned Task of State Key Laboratory of Advanced Welding and Joining(HIT)。
文摘Sliding mode control(SMC)has been studied since the 1950s and widely used in practical applications due to its insensitivity to matched disturbances.The aim of this paper is to present a review of SMC describing the key developments and examining the new trends and challenges for its application to power electronic systems.The fundamental theory of SMC is briefly reviewed and the key technical problems associated with the implementation of SMC to power converters and drives,such chattering phenomenon and variable switching frequency,are discussed and analyzed.The recent developments in SMC systems,future challenges and perspectives of SMC for power converters are discussed.
基金This work was supported in part by the National Natural Science Foundation of China under Project 51877006,and in part by the Aeronautical Science Foundation of China 20162851016。
文摘Wide band-gap gallium nitride(GaN)device has the advantages of large band-gap,high electron mobility and low dielectric constant.Compared with traditional Si devices,these advantages make it suitable for fast-switching and high-power-density power electronics converters,thus reducing the overall weight,volume and power consumption of power electronic systems.As a review paper,this paper summarizes the characteristics and development of the state-of-art GaN power devices with different structures,analyzes the research status,and forecasts the application prospect of GaN devices.In addition,the problems and challenges of GaN devices were discussed.And thanks to the advantages of GaN devices,both the power density and efficiency of motor drive system are improved,which also have been presented in this paper.
文摘The superconducting tokamak HT-7U [1] has been designed by the Institute of Plasma Physics since 1998 and will be set up before 2003. The 1.2 MW /2.45 GHz HT-7U LHCD (Lower hybrid current drive) system which being the most efficient non-induction device can heat the plasma and drive the plasma current has been efficiently in operation 'owl and a particular design of the 2.8 MW/-35 kV high-voltage DC power supply has been already completed and will apply to the klystron of LHCD on HT-7 and the future HT-7U, and the project of the power supply has been examined and approved professionally by an authorized group of high-level specialist in the institute of Plasma Physics. The detailed design of the power supply and the simulation results are referred in the paper.
基金"211" Talent Start-up Fund Project of Northeast Agricultural University (183)
文摘In order to reduce the driving fatigue in sowing work, this paper based on heart rate （HR） as the main indicator to survey, tested and analyzed the fatigue condition of the drivers of three imported tractors and one domestic tractor in sowing work. The results showed that when driving the imported tractors in sowing work, the HR increasing rate was 10.4%-14.3%, labor intensity belonged to the light level; when driving domestic tractor in sowing work, the HR increasing rate was 23.4%-33.0%, it was remarkably bigger than that of driving imported tractors （P〈0.05）, labor intensity belonged to the middle level. The main effects on driving fatigue included the control methods, tractors＇ cab environment, processing time, operating content, and so on. Finally, we proposed the concrete measures and suggestions to reduce driving fatigue and improve drivers＇ work condition.
基金supported by the National Natural Science Foundation of China(61203129,61174038,61473151,51507080)the Fundamental Research Funds for the Central Universities(30915011104,30920130121010,30920140112005)
基金Project of Science & Technology Development Guidance of Jilin Province (No.200405033)
文摘In order to satisfy operating requirements for constant core drilling technology in reverse circulation with hollow-through DTH,the power unit of G-3 engineering driller was ameliorated. The new one with dual channel drive shaft, achieved the perfect assemble with transmission structure of the original power unit. It could interconvert according to need by using two sets of drive shafts with direct and reverse circulation. The repacked G-3 engineering driller carried on experiment in the field test in Luanchuan molybdenum mine of Henan, whose effect was very good.
文摘Taking into account the fact that the computer systems, as the implementations of Turing machine, are physical devices, the paper shows considerations in which hard drive behavior will be presented in terms of statistical mechanics. Because computer is a machine, its analysis cannot be based only on mathematical models apart of physical conditions. In the paper it will be presented a very narrow part this problem – an analysis of hard drive behavior in the context of the power-law distributions. We will focus only on four selected hard drive parameters, i.e. the rate of transfer bytes to or from the disk during the read or write, the number of pending requests to the disk and the rate of read operations. Our research was performed under the Windows operating system and this allows to make a statistical analysis for the possible occurrence of power-laws representing the lack of characteristic scale for considered processes. This property will be confirmed in all analyzed cases. A presented study can help describing the behavior of the whole computer system in terms of physics of computer processing.
文摘To meet stringent requirements in vacuum and cleanness for semiconductor manufacturing, a new power drive module for Selective Compliant Assembly Robot Arm （SCARA） type robot has been developed for wafer-transfer. In order to obtain complete hermetic volume for higher vacuum and prevent leakage of hazardous gases, feedthrough motions involving transfer between the vacuum and motors are achieved by the use of metal bellows and magnetic coupling. An analysis of the coaxial-type magnetic coupling by employing the technique of current sheet model is presented. This approach is proved to be a precise and easy method. The construction of power drive module shows its advantage in maintaining ultrahigh vacuum and also enhances the efficiency for transporting the wafer, as compared with conventional design.
