基于MSPA-MCR-CIRCUIT的山西省运城市景观生态网络构建

山西省运城市位于黄河中下游三省交界处,其景观要素成分复杂,对运城景观生态网络斑块与廊道的研究有利于黄河生态系统稳定性的保护。基于形态空间格局理论(MSPA)确定连通性强的核心斑块,识别核心生态源地,以最小累计阻力模型(MCR)为基础,叠加7种阻力因子构建综合阻力面,根据重力模型划分生态廊道等级。以基于电路理论(CIRCUIT)的Linkage Mapper工具识别生态夹点和障碍点作为生态节点,综合构建源地(面)-廊道(线)-节点(点)的运城市景观生态网络。结果表明:1)运城市核心生态源地有9处,综合重力模型和实际建设需求划分13条重要生态廊道和10条一般生态廊道,识别出关键生态节点17个,一般生态节点34个;2)现有重要生态廊道集中于运城南部,南北方向生态联系较弱,可优先加强贯穿稷山县、新绛县、闻喜县的重要生态廊道建设;3)MSPA模型与电路理论的综合运用可提升景观生态网络构建的科学性和准确性,有利于确定生态修复关键区域,为生态修复项目的布局提供有力支撑。

A new multilevel voltage source inverter configuration with minimum number of circuit elements

An advanced configuration for multilevel voltage source converters is proposed. The proposed converter is able to apply asymmetrical DC sources. The configuration of the proposed inverter is well designed in order to provide the maximum number of voltage levels in output terminals using lower number of circuit devices. The authority of the proposed inverter versus the conventional H-bridge cascaded inverter and the most recently introduced ones, is verified with a provided comparison study. The proposed inverter is able to generate the desired voltage levels using a lower number of circuit devices including power semi-conductor switches, IGBTs, diodes, related gate driver circuits of switches and DC voltage sources. As a result, the total cost and installation area are considerably reduced and the control scheme gets simpler. To confirm the feasibility of the proposed multilevel structure, both the simulation and experimental results are provided and compared which shows good agreements.

Study on Short Circuit Current Calculation of Power System with UHVDC and New Energy Source

With the development of power system, the level of short circuit current will increase accordingly. In general, the influence of the HVDC system and the new energy source is not considered in the calculation of the short circuit current. For the power grid that short circuit current level closes to the interrupting capacity of circuit breaker, it’s necessary to fully consider all kinds of influence factors, careful checking, so as to obtain more accurate calculation results of short circuit current. In 2018, two ±800 kV high-power Ultra High Voltage Direct Current (UHVDC) transmission projects will be connected with Shaanxi power grid, accompanied by a lot of concomitant fossil-fuel generating plants as power resource, and also a large number of new energy source, includes wind power generation and photovoltaic power generation. Around one of the UHVDC converter stations, short circuit current may exceed the withstand limit of some certain circuit breakers. In order to get more accurate short circuit current calculation results, three measures are used: 1) contrastive calculation and analysis by algorithm based on schemes and algorithm based on power flow;2) analysis the influence of UHVDC by electromagnetic transient and electromechanical transient hybrid simulation;3) considered a detailed model of Doubly Fed Induction Generator (DFIG) with low voltage ride through characteristics. The calculation results shows that: in the typical operation mode of Shaanxi power grid of 2018, the original calculation results by conventional calculation method are coincident with the results by considering the influence of algorithms, UHVDC and DFIG in large, in which: the results of the algorithm based on power flow are smaller than that of the algorithm based on schemes about 2 - 8 kA;the steady values of the short circuit current provided by UHVDC converterstation (includes rectifiers and smoothing capacitors) are about 0 - 3 kA;the steady values of the short circuit current provided by DFIG are about 0 - 5 kA. The calculation results can provide reference for the selection of the circuit breaker, and it can be verified by fault recording data in the future.

Theoretical analysis method for Howland current source design

The Howland current source （HCS） circuit is commonly used, e.g. in electrical impedance tomography （EIT） sys tems. It is important to optimise the design parameters, such as the output impedance, bandwidth, current stability and load range. While many people have used this circuit, it has not been systematically analysed. In this paper, a numerical method is proposed to analyse the characteristics of HCS. Based on a nonideal opamp model, general formulas and simplified for mulas for calculating the output impedance and the closeloop gain of HCS are deduced. From these formulas, the practical formulas are chosen and their effectiveness has been proven by analysis and experiment. The output impendence of two HCS circuits based on t^A741 and LM6365 are compared. The magnitudefrequency response and the relationship between the cur rent and the load of HCS are discussed.

Quasi-Z Source Inverter Control of PV Grid-Connected Based on Fuzzy PCI

The photovoltaic grid-connected inverter is an important interface between the photovoltaic power generation system and power grid.Its high-quality operation is directly related to the output power quality of the power grid.In order to further optimize the control effect of the quasi-Z source grid-connected photovoltaic inverter,a fuzzy proportional complex integral control(PCI)method is proposed for the current internal loop control.This method can eliminate the steady-state error,and has the characteristic of zero steady-state error adjustment for the AC disturbance signal of a specific frequency.The inductance-capacitance-inductance(LCL)filter is adopted in the grid-connected circuit,and the feedback capacitive current is taken as the control variable of the inner loop to form the active damping control method,which can not only effectively suppress the resonance of the LCL circuit,but also significantly inhibit the high-order harmonics in the grid-connected current.Finally,a system simulation model is built in MATLAB/Simulink to verify the superiority and effectiveness of the proposed method.

Control Power Source of PV-10 Piezoelectric Crystal Valve

Parameters of the power source used to control PV-10 piezoelectric crystal valve are following DC output voltage： 0 - 120 V, continuously controllable, linear enlargement factor of input direct current voltage： approximate 25 times, the accuracy of DC output voltage： ±5%, manual control and automatic control.

An Intelligent Robot based on Sound Source Localization and Ultrasound Distance Detection

In both industrial and research areas of electronic engineering,Sound Source Localization for robot control has always been an interesting subject to be further studied.Under some dangerous situation,especially when a special driver is required to implement a particular task,the device should be able to combine robotics control technology with Sound Source Localization,and take actions according to the different response patterns.In this research project,a multifunc-tional model driver,named "Mobile Island",has been designed and built up by integrating the Emulator 8051 micro-controller,Intel 8255 interfaces,some components and other necessary devices.The intelligent Mobile Island imple-mented by C language programs can operate under three control modes.In the sound control Mode 1,the model driver can detect and track a target by Sound Source Localization and then turn and move toward the destination.In the keypad control Mode 2,it can be controlled by a manual keypad.In the free run Mode 3,Mobile Island can move and turn by itself.When finding an object in front,it will turn away before moving forward again,so that it can avoid crashing on the obstacle.

面向高比例新能源电网短路计算的机电-电磁融合电源模型

为解决新型电力系统计算与分析中传统电源模型难以继续适用的问题,提出一种面向高比例新能源电网短路计算的机电-电磁融合电源模型。一方面,考虑新能源电源通用控制策略作用下的外部输出特性,采用单一压控电流源等效电源侧海量新能源电源的整体输出;另一方面,根据短路电流故障的时间划分尺度,保留传统发电机工频基波意义下的外部输出特性,并采用3个大小不一且衰减速度不同的电压源等效电源侧所有发电机的整体输出。进而采用3个电压源和1个压控电流源并联的形式作为融合电源模型的结构,并采用内点法对融合电源模型参数进行在线辨识。通过短路仿真数据和电网实测故障录波数据验证了融合电源模型的适用性。

基于开源EDA工具的电路实验课程教学

EDA工具的应用和掌握是电子线路实验课程的重要内容,当前国内相关课程建设多基于国外商用软件。考虑到商用EDA软件的局限性,借鉴开源软件在其他理工科课程教学、开源EDA工具在国外电子类课程教学的应用情况,根据模拟、数字电子线路实验内容,选取了适当的开源EDA工具,进行了课程适配。从两个学年的教学实践看,开源EDA工具可以在电路实验教学中替代商用软件,其开放性有助于激发学生的学习兴趣。

高压大功率SiC MOSFETs短路保护方法

碳化硅(SiC)MOSFETs短路承受能力弱,研究其短路保护方法成为保障电力电子设备安全运行的重要课题。现有方法大多围绕低压小功率SiC MOSFETs,然而随着电压和功率等级的提升,器件特性有所差异,直接套用以往设计难以实现高压大功率SiC MOSFETs的快速、可靠保护。该文首先详细研究了几种常用短路检测方法;其次基于高压大功率SiC MOSFETs器件特性,深入对比分析了不同短路检测方法的适用性,提出一种阻容式漏源极电压检测和栅极电荷检测相结合的短路保护方法;最后搭建了实验平台验证所提方法的可行性。结果表明,提出的方法在硬开关短路故障(hard switching fault,HSF)下,保护响应时间缩短了1.4μs,短路能量降低了62.5%;且能可靠识别负载短路故障(fault under load,FUL)。

面向光伏能量收集应用的实时MPPT预估算法研究

对于环境中存在的各种类型能量源,其往往具有不同的阻抗特性以及输出功率范围。为了提高能量收集系统的能量萃取能力,合理的接口电路设计是关键。基于此,通过对环境中光伏(Photovoltaic,PV)能量源微弱直流特性以及高效率收集和转化的研究,在传统开路电压法(Open-Circuit Voltage,OCV)的基础上,结合输入电压纹波控制,提出了一种可实时最大功率点追踪(Maximum Power Point Tracking,MPPT)的预估算法。该预估算法根据能量源的输出特性,采用了分数开路电压法(Fractional Open-Circuit Voltage,FOCV),并根据纹波大小动态调节变换器的工作模式,实现阻抗匹配。为了尽可能减小因采样带来的能量损失,采用可片上全集成的较小的采样电容,并逐周期的进行开路电压采样和计算,实现了对源功率变化的高精度追踪。仿真结果表明,所提出的追踪算法能够实时监测能量源的状态,具有高的追踪速度和追踪精度,且采样时间仅需100 ns。能量源功率在1μW~10 mW范围内变化时,最短的追踪时间仅需4.37μs,追踪精度可达99.7%。

海洋电磁发射机可控源整流电路动态性能优化

海洋电磁发射机在非理想状况工作时母线会产生冲击电压,严重时损坏开关管和滤波电容,为此提出一种混合控制策略。首先,基于dq坐标系的前馈解耦控制策略分析海洋电磁发射机可控源整流电路的动态性能,其次,通过理论证明负载扰动和无功电流iq≠0影响控制系统的动态性能,然后提出在dq电流解耦控制中引入瞬态直接电流思想的改进q轴混合控制方法,在dq电流解耦控制中引入负载电流前馈和无功电流iq≠0环节,改善了d轴电流id的响应速度,提高了控制系统的动态性能。最后,实验结果对比表明,混合控制方法在负载突变、直流侧电压给定值突变和船上柴油发电机电压跌落3种情况下,直流侧电压超调差最小,与最长调整时间相比减少了65%左右。

半导体激光器驱动器的SPICE仿真及其在气体传感系统的应用

为了提高激光器的工作可靠性和稳定性,借助TINA-SPICE软件对其驱动电路进行辅助设计,并通过电调制和光电检测系统实验检验设计效果。对驱动器的恒流输出电路的幅频特性和瞬态响应进行仿真,预测潜在的电流振荡现象,并提出一种用于补偿环路增益的易用方案。通过对比补偿前后的仿真曲线,验证了该方案的可行性。在此基础上,以STM32H743作为中央处理核心,通过触摸屏图形化设置和监测驱动电流参数,从而调度激光器驱动电路的运行。在296 K环境温度下,利用该电路进行半导体激光器电调制特性实验,通过拟合波长与电流得到调制系数为0.045 cm-1/mA。进一步地,将该控制器引入基于红外光谱吸收技术的气体传感系统,完成了对甲烷气体的定量分析。分析结果表明,所设计的电路能稳定地驱动激光器并实现对波长的精准调制,获得的气体传感系统的检测下限低于8 ppm。

适用于SiC MOSFET的漏源电压积分自适应快速短路保护电路研究

SiC MOSFET因其高击穿电压、高开关速度、低导通损耗等性能优势而被广泛应用于各类电力电子变换器中。然而,由于其短路耐受时间仅为2~7μs,且随母线电压升高而缩短,快速可靠的短路保护电路已成为其推广应用的关键技术之一。为应对不同母线电压下的Si C MOSFET短路故障,文中提出一种基于漏源电压积分的自适应快速短路保护方法(drain-sourcevoltageintegration-basedadaptivefast short-circuit protection method,DSVI-AFSCPM),研究所提出的DSVI-AFSCPM在硬开关短路(hardswitchingfault,HSF)和负载短路(fault under load,FUL)条件下的保护性能,进而研究不同母线电压对DSVI-AFSCPM的作用机理。同时,探究Si CMOSFET工作温度对其响应速度的影响。最后,搭建实验平台,对所提出的DSVI-AFSCPM在发生硬开关短路和负载短路时不同母线电压、不同工作温度下的保护性能进行实验测试。实验结果表明,所提出的DSVI-AFSCPM在不同母线电压下具有良好的保护速度自适应性,即母线电压越高,短路保护速度越快,并且其响应速度受Si CMOSFET工作温度影响较小,两种短路工况下工作温度从25℃变化到125℃,短路保护时间变化不超过90 ns。因此,该文为Si CMOSFET在不同母线电压下的可靠使用提供一定技术支撑。

基于盲源分离和机器学习的光伏并网逆变器故障诊断

针对光伏并网逆变器单个开关管发生开路故障不易察觉的问题,提出了一种基于盲源分离和机器学习的诊断方法。首先,采用FastICA算法实现单个开关管开路故障的判定;其次,提取旋转电流在时域和频域下的特征值;最后,以旋转电流特征值为输入、逆变器工作状态编码为输出进行机器学习模型训练,并对模型进行交叉验证。仿真实验结果表明,该方法的开路故障诊断准确率较高。

亚纳秒重频脉冲信号源设计与实验

亚纳秒前沿、数百伏幅度、近似高斯单周波的重频窄脉冲信号源在超宽带探测、电磁兼容测试等领域有着十分广泛的应用。设计了一种全固态Marx电路结构型重频脉冲信号源,选用云母电容、雪崩三极管、贴片电阻、电感等元器件,根据信号输出要求优化印制电路板(PCB)布局及微带线结构,调整匹配电路元件参数,在50Ω电阻负载上获得了脉冲峰值约1 kV、脉宽约650 ps、前沿约450 ps、后沿约700 ps的单极性负脉冲信号,脉冲波形前后沿相似且光滑陡峭,实现了10 kHz重频输出,波形峰值抖动和半高宽抖动均小于10%。

竖进平出型地埋管群换热器结构与控制优化

【目的】为提高浅层地热能利用效率,亟须对影响地源热泵系统性能的地埋管换热器结构和控制开展优化设计。【方法】建立了一种竖进平出型地埋管群换热器模型,研究其换热系统性能,探究其最佳结构及运行方式。【结果】管群布置横纵比越低,单位面积换热量越大,横纵比超过0.15后对系统影响较小;换热器间距越小,土壤利用率越高,但热短路损失越大;双列双出型埋管每延米换热量相较于双列单出型结构提升7%以上;负荷较大工况下叉排布置结构的换热效果更好;整个夏季优化结构的平均出口温度下降2.28℃,换热器周围土壤温度下降1℃以上;实际运行过程中应优先考虑采用流速随负荷变化控制模式。【结论】研究结果可为地源热泵换热器的设计、制造提供理论依据。

模拟混合视频处理电路单粒子效应测试系统设计

为开展模拟混合视频处理电路的单粒子效应研究,通过改变伪CCD信号源的输出信号,建立一款模拟混合视频处理电路的单粒子效应测试系统,实现该器件的单粒子闭锁、单粒子翻转与单粒子功能中断等单粒子效应的评估。通过在中科院近物所回旋加速器和中国原子能院串列加速器的试验测试,获取有效数据。试验结果表明该试验方法及测试系统可以有效评估器件的单粒子性能,为器件的加固设计提供有力数据支撑。

基于等效电流源的级联混合直流馈入系统强度影响分析

级联型混合直流系统受端的模块化多电平换流器高压直流系统(modular multilevel converter high voltage direct current,MMC-HVDC)和电网换相换流器高压直流系统(line commutated converter high voltage direct current,LCC-HVDC)会因馈入点电气距离较近而存在强相互作用关系。为明确级联型混合直流馈入系统中MMC-HVDC对LCC-HVDC系统强度的影响,提出考虑幅值和相位的MMC等效电流源的简化等效方法,基于所提MMC等效原理将级联型混合直流馈入系统等效成单馈入LCC-HVDC系统,分析等效单馈入系统的参数计算方法,并提出等效单馈入短路比评估指标。最后通过该指标分析归纳了不同控制方式、不同电气距离下等效单馈入系统的系统强度变化情况,即为MMC-HVDC对LCC-HVDC系统强度的影响规律。机理分析和基于PSCDAD/EMTDC、MATLAB的仿真结果表明,所提等效方法具有有效性且所提指标能很好地反应MMC-HVDC对LCC-HVDC系统强度的影响。

基于两电平电压源合成试验方法的混合式直流断路器开断过程仿真研究

直流断路器在研究过程中需要试验测试为设计提供参考,在其制造完成后则需要进行型式试验验证其可靠性。文中以15 kV电压等级的负压耦合型混合式直流断路器为例,对其短路电流开断过程进行仿真并提取了关键点电应力;阐述了两电平电压源合成试验方法,设计了适用于负压耦合型混合式直流断路器的两电平电压源合成试验回路,并优化了参数选取;将两电平回路下开断过程的仿真结果与开断过程所需的电应力进行对比,证明了两电平电压源合成试验方法可以提供开断过程所需的电压与电流应力,验证了两电平合成试验方法的等效性与可行性。文中研究结果可为高压直流断路器的研究、设计及试验提供参考。