New ID Card Stresses Constitutional Rights

ID cards are de Rigueur worldwide. The majority of countries have some kind of national identification system. A small card makes it easier for people to identify themesleves and to take part in social, political and other activities. But absuse or "authorized" abuse of the card may also cause problems and even encroach upon the basic rights of citizens. China introduced the national identification system in 1985, when regulations on what was then called "residence identification card" were enacted. Over the past 18 years, the country has issued 1.14 billion ID cards and the number of actual card holders has reached 980 million.

Stress relaxation analysis of single chondrocytes using porohyperelastic model based on AFM experiments

Based on atomic force microscopy technique, we found that the chon- drocytes exhibits stress relaxation behavior. We explored the mechanism of this stress relaxation behavior and concluded that the intracellular fluid exuding out from the cells during deformation plays the most important role in the stress relax- ation. We applied the inverse finite element analysis technique to determine nec- essary material parameters for porohyperelastic （PHE） model to simulate stress relaxation behavior as this model is proven capable of capturing the non-linear behavior and the fluid-solid interaction during the stress relaxation of the single chondrocytes. It is observed that PHE model can precisely capture the stress re- laxation behavior of single chondrocytes and would be a suitable model for cell biomechanics.

Characterization of transient groundwater flow through a high arch dam foundation during reservoir impounding

Numerous deep underground projects have been designed and constructed in China, which are beyond the current specifications in terms of scale and construction difficulty. The severe failure problems induced by high in situ stress, such as rockburst, spalling, damage of deep surrounding rocks, and timedependent damage, were observed during construction of these projects. To address these problems, the dynamic design method for deep hard rock tunnels is proposed based on the disintegration process of surrounding rocks using associated dynamic control theories and technologies. Seven steps are basically employed：（i） determination of design objective,（ii） characteristics of site, rock mass and project, and identification of constraint conditions,（iii） selection or development of global design strategy,（iv）determination of modeling method and software,（v） preliminary design,（vi） comprehensive integrated method and dynamic feedback analysis, and（vii） final design. This dynamic method was applied to the construction of the headrace tunnels at Jinping II hydropower station. The key technical issues encountered during the construction of deep hard rock tunnels, such as in situ stress distribution along the tunnels, mechanical properties and constitutive model of deep hard rocks, determination of mechanical parameters of surrounding rocks, stability evaluation of surrounding rocks, and optimization design of rock support and lining, have been adequately addressed. The proposed method and its application can provide guidance for deep underground projects characterized with similar geological conditions.

Hot Deformation Behavior and Flow Stress Prediction of Ultra Purified 17% Cr Ferritic Stainless Steel Stabilized with Nb and Ti

The hot deformation behavior of ultra purified 17% Cr ferritic stainless steel stabilized with Nb and Ti was investigated using axisymmetric hot compression tests on a thermomechanical simulator.The deformation was carried out at the temperatures ranging from 700 to 1 100℃ and strain rates from 1to 10s-1.The microstructure was investigated using electron backscattering diffraction.The effects of temperature and strain rate on deformation behavior were represented by Zener-Hollomon parameter in an exponent type equation.The effect of strain was incorporated in the constitutive equation by establishing polynomial relationship between the material constants and strain.A sixth order polynomial was suitable to represent the effect of strain.The modified constitutive equation considering the effect of strain was developed and could predict the flow stress throughout the deformation conditions except at800℃in 1s-1 and at 700℃in 5and 10s-1.Losing the reliability of the modified constitutive equation was possibly ascribed to the increase in average Taylor factor at 800℃in 1s-1 and the increase in temperature at 700℃in 5and10s-1 during hot deformation.The optimum window for improving product quality of the ferritic stainless steels was identified as hot rolling at a low finisher entry temperature of 700℃,which can be achieved in practical production.

Effect of squeeze casting process on microstructures and flow stress behavior of Al-17.5Si-4Cu-0.5Mg alloy

The effects of squeeze casting process on microstructure and flow stress behavior of Al-17.5Si-4Cu-0.5Mg alloy were investigated and the hot-compression tests of gravity casting and squeeze casting alloy were carried out at 350-500°C and 0.001-5s-1.The results show that microstructures of Al-17.5Si-4Cu-0.5Mg alloys were obviously improved by squeeze casting.Due to the decrease of coarse primary Si particles,softα-Al dendrite as well as the fine microstructures appeared,and the mechanical properties of squeeze casting alloys were improved.However,when the strain rate rises or the deformation temperature decreases,the flow stress increases and it was proved that the alloy is a positive strain rate sensitive material.It was deduced that compared with the gravity casting alloy,squeeze casting alloy（solidified at 632 MPa）is more difficult to deform since the flow stress of squeeze casting alloy is higher than that of gravity casting alloy when the deformation temperature exceeds 400°C.Flow stress behavior of Al-17.5Si-4Cu-0.5Mg alloy can be described by a hyperbolic sine form with Zener-Hollomon parameter,and the average hot deformation activation energy Q of gravity casting alloy and squeeze casting alloy is 278.97 and 308.77kJ/mol,respectively.

Non-linear Constitutive Model for the Oligocarbonate Polyurethane Material

The polyurethane, which was the subject of the constitutive research presented in the paper, was based on oligocarbonate diols Desmophen C2100 produced by Bayer？. The constitutive modelling was performed with a view to applying the material as the inlay of intervertebral disc prostheses. The polyurethane was assumed to be non-linearly viscohyperelastic, isotropic and incompressible. The constitutive equation was derived from the postulated strain energy function. The elastic and rheological constants were identified on the basis of experimental tests, i.e. relaxation tests and monotonic uniaxial tests at two different strain rates, i.e. λ= 0.1 min-1 and λ= 1.0 min-1. The stiffness tensor was derived and introduced to Abaqus？finite element（FE） software in order to numerically validate the constitutive model. The results of the constants identification and numerical implementation show that the derived constitutive equation is fully adequate to model stress-strain behavior of the polyurethane material.